/*
* linux/drivers/video/w100fb.c
*
* Corgi/Spitz LCD Specific Code
*
* Copyright (C) 2005 Richard Purdie
*
* Connectivity:
* Corgi - LCD to ATI Imageon w100 (Wallaby)
* Spitz - LCD to PXA Framebuffer
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/string.h>
#include <asm/arch/akita.h>
#include <asm/arch/corgi.h>
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/sharpsl.h>
#include <asm/arch/spitz.h>
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
/* Register Addresses */
#define RESCTL_ADRS 0x00
#define PHACTRL_ADRS 0x01
#define DUTYCTRL_ADRS 0x02
#define POWERREG0_ADRS 0x03
#define POWERREG1_ADRS 0x04
#define GPOR3_ADRS 0x05
#define PICTRL_ADRS 0x06
#define POLCTRL_ADRS 0x07
/* Resgister Bit Definitions */
#define RESCTL_QVGA 0x01
#define RESCTL_VGA 0x00
#define POWER1_VW_ON 0x01 /* VW Supply FET ON */
#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */
#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */
#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */
#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */
#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */
#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */
#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */
#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */
#define POWER0_COM_ON 0x08 /* COM Powewr Supply ON */
#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */
#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */
#define POWER0_COM_OFF 0x00 /* COM Powewr Supply OFF */
#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */
#define PICTRL_INIT_STATE 0x01
#define PICTRL_INIOFF 0x02
#define PICTRL_POWER_DOWN 0x04
#define PICTRL_COM_SIGNAL_OFF 0x08
#define PICTRL_DAC_SIGNAL_OFF 0x10
#define POLCTRL_SYNC_POL_FALL 0x01
#define POLCTRL_EN_POL_FALL 0x02
#define POLCTRL_DATA_POL_FALL 0x04
#define POLCTRL_SYNC_ACT_H 0x08
#define POLCTRL_EN_ACT_L 0x10
#define POLCTRL_SYNC_POL_RISE 0x00
#define POLCTRL_EN_POL_RISE 0x00
#define POLCTRL_DATA_POL_RISE 0x00
#define POLCTRL_SYNC_ACT_L 0x00
#define POLCTRL_EN_ACT_H 0x00
#define PHACTRL_PHASE_MANUAL 0x01
#define DEFAULT_PHAD_QVGA (9)
#define DEFAULT_COMADJ (125)
/*
* This is only a psuedo I2C interface. We can't use the standard kernel
* routines as the interface is write only. We just assume the data is acked...
*/
static void lcdtg_ssp_i2c_send(u8 data)
{
corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
udelay(10);
}
static void lcdtg_i2c_send_bit(u8 data)
{
lcdtg_ssp_i2c_send(data);
lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
lcdtg_ssp_i2c_send(data);
}
static void lcdtg_i2c_send_start(u8 base)
{
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
lcdtg_ssp_i2c_send(base);
}
static void lcdtg_i2c_send_stop(u8 base)
{
lcdtg_ssp_i2c_send(base);
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
}
static void lcdtg_i2c_send_byte(u8 base, u8 data)
{
int i;
for (i = 0; i < 8; i++) {
if (data & 0x80)
lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
else
lcdtg_i2c_send_bit(base);
data <<= 1;
}
}
static void lcdtg_i2c_wait_ack(u8 base)
{
lcdtg_i2c_send_bit(base);
}
static void lcdtg_set_common_voltage(u8 base_data, u8 data)
{
/* Set Common Voltage to M62332FP via I2C */
lcdtg_i2c_send_start(base_data);
lcdtg_i2c_send_byte(base_data, 0x9c);
lcdtg_i2c_wait_ack(base_data);
lcdtg_i2c_send_byte(base_data, 0x00);
lcdtg_i2c_wait_ack(base_data);
lcdtg_i2c_send_byte(base_data, data);
lcdtg_i2c_wait_ack(base_data);
lcdtg_i2c_send_stop(base_data);
}
/* Set Phase Adjuct */
static void lcdtg_set_phadadj(int mode)
{
int adj;
switch(mode) {
case 480:
case 640:
/* Setting for VGA */
adj = sharpsl_param.phadadj;
if (adj < 0) {
adj = PHACTRL_PHASE_MANUAL;
} else {
adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
}
break;
case 240:
case 320:
default:
/* Setting for QVGA */
adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
break;
}
corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
}
static int lcd_inited;
static void lcdtg_hw_init(int mode)
{
if (!lcd_inited) {
int comadj;
/* Initialize Internal Logic & Port */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
| PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
| POWER0_COM_OFF | POWER0_VCC5_OFF);
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
/* VDD(+8V), SVSS(-4V) ON */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
mdelay(3);
/* DAC ON */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
| POWER0_COM_OFF | POWER0_VCC5_OFF);
/* INIB = H, INI = L */
/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
/* Set Common Voltage */
comadj = sharpsl_param.comadj;
if (comadj < 0)
comadj = DEFAULT_COMADJ;
lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
/* VCC5 ON, DAC ON */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
POWER0_COM_OFF | POWER0_VCC5_ON);
/* GVSS(-8V) ON, VDD ON */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
mdelay(2);
/* COM SIGNAL ON (PICTL[3] = L) */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
/* COM ON, DAC ON, VCC5_ON */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
| POWER0_COM_ON | POWER0_VCC5_ON);
/* VW ON, GVSS ON, VDD ON */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
/* Signals output enable */
corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
/* Set Phase Adjuct */
lcdtg_set_phadadj(mode);
/* Initialize for Input Signals from ATI */
corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
| POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
udelay(1000);
lcd_inited=1;
} else {
lcdtg_set_phadadj(mode);
}
switch(mode) {
case 480:
case 640:
/* Set Lcd Resolution (VGA) */
corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
break;
case 240:
case 320:
default:
/* Set Lcd Resolution (QVGA) */
corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
break;
}
}
static void lcdtg_suspend(void)
{
/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
mdelay(34);
/* (1)VW OFF */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
/* (2)COM OFF */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
/* (3)Set Common Voltage Bias 0V */
lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
/* (4)GVSS OFF */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
/* (5)VCC5 OFF */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
/* (6)Set PDWN, INIOFF, DACOFF */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
/* (7)DAC OFF */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
/* (8)VDD OFF */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
lcd_inited = 0;
}
/*
* Corgi w100 Frame Buffer Device
*/
#ifdef CONFIG_PXA_SHARP_C7xx
#include <video/w100fb.h>
static void w100_lcdtg_suspend(struct w100fb_par *par)
{
lcdtg_suspend();
}
static void w100_lcdtg_init(struct w100fb_par *par)
{
lcdtg_hw_init(par->xres);
}
static struct w100_tg_info corgi_lcdtg_info = {
.change = w100_lcdtg_init,
.suspend = w100_lcdtg_suspend,
.resume = w100_lcdtg_init,
};
static struct w100_mem_info corgi_fb_mem = {
.ext_cntl = 0x00040003,
.sdram_mode_reg = 0x00650021,
.ext_timing_cntl = 0x10002a4a,
.io_cntl = 0x7ff87012,
.size = 0x1fffff,
};
static struct w100_gen_regs corgi_fb_regs = {
.lcd_format = 0x00000003,
.lcdd_cntl1 = 0x01CC0000,
.lcdd_cntl2 = 0x0003FFFF,
.genlcd_cntl1 = 0x00FFFF0D,
.genlcd_cntl2 = 0x003F3003,
.genlcd_cntl3 = 0x000102aa,
};
static struct w100_gpio_regs corgi_fb_gpio = {
.init_data1 = 0x000000bf,
.init_data2 = 0x00000000,
.gpio_dir1 = 0x00000000,
.gpio_oe1 = 0x03c0feff,
.gpio_dir2 = 0x00000000,
.gpio_oe2 = 0x00000000,
};
static struct w100_mode corgi_fb_modes[] = {
{
.xres = 480,
.yres = 640,
.left_margin = 0x56,
.right_margin = 0x55,
.upper_margin = 0x03,
.lower_margin = 0x00,
.crtc_ss = 0x82360056,
.crtc_ls = 0xA0280000,
.crtc_gs = 0x80280028,
.crtc_vpos_gs = 0x02830002,
.crtc_rev = 0x00400008,
.crtc_dclk = 0xA0000000,
.crtc_gclk = 0x8015010F,
.crtc_goe = 0x80100110,
.crtc_ps1_active = 0x41060010,
.pll_freq = 75,
.fast_pll_freq = 100,
.sysclk_src = CLK_SRC_PLL,
.sysclk_divider = 0,
.pixclk_src = CLK_SRC_PLL,
.pixclk_divider = 2,
.pixclk_divider_rotated = 6,
},{
.xres = 240,
.yres = 320,
.left_margin = 0x27,
.right_margin = 0x2e,
.upper_margin = 0x01,
.lower_margin = 0x00,
.crtc_ss = 0x81170027,
.crtc_ls = 0xA0140000,
.crtc_gs = 0xC0140014,
.crtc_vpos_gs = 0x00010141,
.crtc_rev = 0x00400008,
.crtc_dclk = 0xA0000000,
.crtc_gclk = 0x8015010F,
.crtc_goe = 0x80100110,
.crtc_ps1_active = 0x41060010,
.pll_freq = 0,
.fast_pll_freq = 0,
.sysclk_src = CLK_SRC_XTAL,
.sysclk_divider = 0,
.pixclk_src = CLK_SRC_XTAL,
.pixclk_divider = 1,
.pixclk_divider_rotated = 1,
},
};
static struct w100fb_mach_info corgi_fb_info = {
.tg = &corgi_lcdtg_info,
.init_mode = INIT_MODE_ROTATED,
.mem = &corgi_fb_mem,
.regs = &corgi_fb_regs,
.modelist = &corgi_fb_modes[0],
.num_modes = 2,
.gpio = &corgi_fb_gpio,
.xtal_freq = 12500000,
.xtal_dbl = 0,
};
static struct resource corgi_fb_resources[] = {
[0] = {
.start = 0x08000000,
.end = 0x08ffffff,
.flags = IORESOURCE_MEM,
},
};
struct platform_device corgifb_device = {
.name = "w100fb",
.id = -1,
.num_resources = ARRAY_SIZE(corgi_fb_resources),
.resource = corgi_fb_resources,
.dev = {
.platform_data = &corgi_fb_info,
.parent = &corgissp_device.dev,
},
};
#endif
/*
* Spitz PXA Frame Buffer Device
*/
#ifdef CONFIG_PXA_SHARP_Cxx00
#include <asm/arch/pxafb.h>
void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
{
if (on)
lcdtg_hw_init(var->xres);
else
lcdtg_suspend();
}
#endif
/*
* Corgi/Spitz Touchscreen to LCD interface
*/
static unsigned long (*get_hsync_time)(struct device *dev);
static void inline sharpsl_wait_sync(int gpio)
{
while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
}
#ifdef CONFIG_PXA_SHARP_C7xx
unsigned long corgi_get_hsync_len(void)
{
if (!get_hsync_time)
get_hsync_time = symbol_get(w100fb_get_hsynclen);
if (!get_hsync_time)
return 0;
return get_hsync_time(&corgifb_device.dev);
}
void corgi_put_hsync(void)
{
if (get_hsync_time)
symbol_put(w100fb_get_hsynclen);
get_hsync_time = NULL;
}
void corgi_wait_hsync(void)
{
sharpsl_wait_sync(CORGI_GPIO_HSYNC);
}
#endif
#ifdef CONFIG_PXA_SHARP_Cxx00
static struct device *spitz_pxafb_dev;
static int is_pxafb_device(struct device * dev, void * data)
{
struct platform_device *pdev = container_of(dev, struct platform_device, dev);
return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
}
unsigned long spitz_get_hsync_len(void)
{
#ifdef CONFIG_FB_PXA
if (!spitz_pxafb_dev) {
spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
if (!spitz_pxafb_dev)
return 0;
}
if (!get_hsync_time)
get_hsync_time = symbol_get(pxafb_get_hsync_time);
if (!get_hsync_time)
#endif
return 0;
return pxafb_get_hsync_time(spitz_pxafb_dev);
}
void spitz_put_hsync(void)
{
put_device(spitz_pxafb_dev);
if (get_hsync_time)
symbol_put(pxafb_get_hsync_time);
spitz_pxafb_dev = NULL;
get_hsync_time = NULL;
}
void spitz_wait_hsync(void)
{
sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
}
#endif
/*
* Corgi/Spitz Backlight Power
*/
#ifdef CONFIG_PXA_SHARP_C7xx
void corgi_bl_set_intensity(int intensity)
{
if (intensity > 0x10)
intensity += 0x10;
/* Bits 0-4 are accessed via the SSP interface */
corgi_ssp_blduty_set(intensity & 0x1f);
/* Bit 5 is via SCOOP */
if (intensity & 0x0020)
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
else
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
}
#endif
#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
void spitz_bl_set_intensity(int intensity)
{
if (intensity > 0x10)
intensity += 0x10;
/* Bits 0-4 are accessed via the SSP interface */
corgi_ssp_blduty_set(intensity & 0x1f);
/* Bit 5 is via SCOOP */
if (intensity & 0x0020)
reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
else
set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
if (intensity)
set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
else
reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
}
#endif
#ifdef CONFIG_MACH_AKITA
void akita_bl_set_intensity(int intensity)
{
if (intensity > 0x10)
intensity += 0x10;
/* Bits 0-4 are accessed via the SSP interface */
corgi_ssp_blduty_set(intensity & 0x1f);
/* Bit 5 is via IO-Expander */
if (intensity & 0x0020)
akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
else
akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
if (intensity)
akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
else
akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
}
#endif
