/*
* arch/arm/mach-orion/addr-map.c
*
* Address map functions for Marvell Orion System On Chip
*
* Maintainer: Tzachi Perelstein <tzachi@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/hardware.h>
#include "common.h"
/*
* The Orion has fully programable address map. There's a separate address
* map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB,
* Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
* address decode windows that allow it to access any of the Orion resources.
*
* CPU address decoding --
* Linux assumes that it is the boot loader that already setup the access to
* DDR and internal registers.
* Setup access to PCI and PCI-E IO/MEM space is issued by core.c.
* Setup access to various devices located on the device bus interface (e.g.
* flashes, RTC, etc) should be issued by machine-setup.c according to
* specific board population (by using orion_setup_cpu_win()).
*
* Non-CPU Masters address decoding --
* Unlike the CPU, we setup the access from Orion's master interfaces to DDR
* banks only (the typical use case).
* Setup access for each master to DDR is issued by common.c.
*
* Note: although orion_setbits() and orion_clrbits() are not atomic
* no locking is necessary here since code in this file is only called
* at boot time when there is no concurrency issues.
*/
/*
* Generic Address Decode Windows bit settings
*/
#define TARGET_DDR 0
#define TARGET_PCI 3
#define TARGET_PCIE 4
#define TARGET_DEV_BUS 1
#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \
((n) == 1) ? 0xd : \
((n) == 2) ? 0xb : \
((n) == 3) ? 0x7 : 0xf)
#define ATTR_PCIE_MEM 0x59
#define ATTR_PCIE_IO 0x51
#define ATTR_PCI_MEM 0x59
#define ATTR_PCI_IO 0x51
#define ATTR_DEV_CS0 0x1e
#define ATTR_DEV_CS1 0x1d
#define ATTR_DEV_CS2 0x1b
#define ATTR_DEV_BOOT 0xf
#define WIN_EN 1
/*
* Helpers to get DDR banks info
*/
#define DDR_BASE_CS(n) ORION_DDR_REG(0x1500 + ((n) * 8))
#define DDR_SIZE_CS(n) ORION_DDR_REG(0x1504 + ((n) * 8))
#define DDR_MAX_CS 4
#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1)
#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000)
#define DDR_BANK_EN 1
/*
* CPU Address Decode Windows registers
*/
#define CPU_WIN_CTRL(n) ORION_BRIDGE_REG(0x000 | ((n) << 4))
#define CPU_WIN_BASE(n) ORION_BRIDGE_REG(0x004 | ((n) << 4))
#define CPU_WIN_REMAP_LO(n) ORION_BRIDGE_REG(0x008 | ((n) << 4))
#define CPU_WIN_REMAP_HI(n) ORION_BRIDGE_REG(0x00c | ((n) << 4))
#define CPU_MAX_WIN 8
/*
* Use this CPU address decode windows allocation
*/
#define CPU_WIN_PCIE_IO 0
#define CPU_WIN_PCI_IO 1
#define CPU_WIN_PCIE_MEM 2
#define CPU_WIN_PCI_MEM 3
#define CPU_WIN_DEV_BOOT 4
#define CPU_WIN_DEV_CS0 5
#define CPU_WIN_DEV_CS1 6
#define CPU_WIN_DEV_CS2 7
/*
* PCIE Address Decode Windows registers
*/
#define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4))
#define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8))
#define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8))
#define PCIE_WIN_CTRL(n) (((n) < 5) ? \
ORION_PCIE_REG(0x1820 + ((n) << 4)) : \
ORION_PCIE_REG(0x1880))
#define PCIE_WIN_BASE(n) (((n) < 5) ? \
ORION_PCIE_REG(0x1824 + ((n) << 4)) : \
ORION_PCIE_REG(0x1884))
#define PCIE_WIN_REMAP(n) (((n) < 5) ? \
ORION_PCIE_REG(0x182c + ((n) << 4)) : \
ORION_PCIE_REG(0x188c))
#define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0)
#define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0)
#define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4)
#define PCIE_MAX_BARS 3
#define PCIE_MAX_WINS 6
/*
* Use PCIE BAR '1' for all DDR banks
*/
#define PCIE_DRAM_BAR 1
/*
* PCI Address Decode Windows registers
*/
#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION_PCI_REG(0xc08) : \
((n) == 1) ? ORION_PCI_REG(0xd08) : \
((n) == 2) ? ORION_PCI_REG(0xc0c) : \
((n) == 3) ? ORION_PCI_REG(0xd0c) : 0)
#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION_PCI_REG(0xc48) : \
((n) == 1) ? ORION_PCI_REG(0xd48) : \
((n) == 2) ? ORION_PCI_REG(0xc4c) : \
((n) == 3) ? ORION_PCI_REG(0xd4c) : 0)
#define PCI_BAR_ENABLE ORION_PCI_REG(0xc3c)
#define PCI_CTRL_BASE_LO(n) ORION_PCI_REG(0x1e00 | ((n) << 4))
#define PCI_CTRL_BASE_HI(n) ORION_PCI_REG(0x1e04 | ((n) << 4))
#define PCI_CTRL_SIZE(n) ORION_PCI_REG(0x1e08 | ((n) << 4))
#define PCI_ADDR_DECODE_CTRL ORION_PCI_REG(0xd3c)
/*
* PCI configuration heleprs for BAR settings
*/
#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1)
#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10)
#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14)
/*
* Gigabit Ethernet Address Decode Windows registers
*/
#define ETH_WIN_BASE(win) ORION_ETH_REG(0x200 + ((win) * 8))
#define ETH_WIN_SIZE(win) ORION_ETH_REG(0x204 + ((win) * 8))
#define ETH_WIN_REMAP(win) ORION_ETH_REG(0x280 + ((win) * 4))
#define ETH_WIN_EN ORION_ETH_REG(0x290)
#define ETH_WIN_PROT ORION_ETH_REG(0x294)
#define ETH_MAX_WIN 6
#define ETH_MAX_REMAP_WIN 4
/*
* USB Address Decode Windows registers
*/
#define USB_WIN_CTRL(i, w) ((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \
: ORION_USB1_REG(0x320 + ((w) << 4)))
#define USB_WIN_BASE(i, w) ((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \
: ORION_USB1_REG(0x324 + ((w) << 4)))
#define USB_MAX_WIN 4
/*
* SATA Address Decode Windows registers
*/
#define SATA_WIN_CTRL(win) ORION_SATA_REG(0x30 + ((win) * 0x10))
#define SATA_WIN_BASE(win) ORION_SATA_REG(0x34 + ((win) * 0x10))
#define SATA_MAX_WIN 4
static int __init orion_cpu_win_can_remap(u32 win)
{
u32 dev, rev;
orion_pcie_id(&dev, &rev);
if ((dev == MV88F5281_DEV_ID && win < 4)
|| (dev == MV88F5182_DEV_ID && win < 2)
|| (dev == MV88F5181_DEV_ID && win < 2))
return 1;
return 0;
}
void __init orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap)
{
u32 win, attr, ctrl;
switch (target) {
case ORION_PCIE_IO:
target = TARGET_PCIE;
attr = ATTR_PCIE_IO;
win = CPU_WIN_PCIE_IO;
break;
case ORION_PCI_IO:
target = TARGET_PCI;
attr = ATTR_PCI_IO;
win = CPU_WIN_PCI_IO;
break;
case ORION_PCIE_MEM:
target = TARGET_PCIE;
attr = ATTR_PCIE_MEM;
win = CPU_WIN_PCIE_MEM;
break;
case ORION_PCI_MEM:
target = TARGET_PCI;
attr = ATTR_PCI_MEM;
win = CPU_WIN_PCI_MEM;
break;
case ORION_DEV_BOOT:
target = TARGET_DEV_BUS;
attr = ATTR_DEV_BOOT;
win = CPU_WIN_DEV_BOOT;
break;
case ORION_DEV0:
target = TARGET_DEV_BUS;
attr = ATTR_DEV_CS0;
win = CPU_WIN_DEV_CS0;
break;
case ORION_DEV1:
target = TARGET_DEV_BUS;
attr = ATTR_DEV_CS1;
win = CPU_WIN_DEV_CS1;
break;
case ORION_DEV2:
target = TARGET_DEV_BUS;
attr = ATTR_DEV_CS2;
win = CPU_WIN_DEV_CS2;
break;
case ORION_DDR:
case ORION_REGS:
/*
* Must be mapped by bootloader.
*/
default:
target = attr = win = -1;
BUG();
}
base &= 0xffff0000;
ctrl = (((size - 1) & 0xffff0000) | (attr << 8) |
(target << 4) | WIN_EN);
orion_write(CPU_WIN_BASE(win), base);
orion_write(CPU_WIN_CTRL(win), ctrl);
if (orion_cpu_win_can_remap(win)) {
if (remap >= 0) {
orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
orion_write(CPU_WIN_REMAP_HI(win), 0);
} else {
orion_write(CPU_WIN_REMAP_LO(win), base);
orion_write(CPU_WIN_REMAP_HI(win), 0);
}
}
}
void __init orion_setup_cpu_wins(void)
{
int i;
/*
* First, disable and clear windows
*/
for (i = 0; i < CPU_MAX_WIN; i++) {
orion_write(CPU_WIN_BASE(i), 0);
orion_write(CPU_WIN_CTRL(i), 0);
if (orion_cpu_win_can_remap(i)) {
orion_write(CPU_WIN_REMAP_LO(i), 0);
orion_write(CPU_WIN_REMAP_HI(i), 0);
}
}
/*
* Setup windows for PCI+PCIe IO+MEM space.
*/
orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_PHYS_BASE,
ORION_PCIE_IO_SIZE, ORION_PCIE_IO_BUS_BASE);
orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_PHYS_BASE,
ORION_PCI_IO_SIZE, ORION_PCI_IO_BUS_BASE);
orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_PHYS_BASE,
ORION_PCIE_MEM_SIZE, -1);
orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_PHYS_BASE,
ORION_PCI_MEM_SIZE, -1);
}
/*
* Setup PCIE BARs and Address Decode Wins:
* BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
* WIN[0-3] -> DRAM bank[0-3]
*/
void __init orion_setup_pcie_wins(void)
{
u32 base, size, i;
/*
* First, disable and clear BARs and windows
*/
for (i = 1; i < PCIE_MAX_BARS; i++) {
orion_write(PCIE_BAR_CTRL(i), 0);
orion_write(PCIE_BAR_LO(i), 0);
orion_write(PCIE_BAR_HI(i), 0);
}
for (i = 0; i < PCIE_MAX_WINS; i++) {
orion_write(PCIE_WIN_CTRL(i), 0);
orion_write(PCIE_WIN_BASE(i), 0);
orion_write(PCIE_WIN_REMAP(i), 0);
}
/*
* Setup windows for DDR banks. Count total DDR size on the fly.
*/
base = DDR_REG_TO_BASE(orion_read(DDR_BASE_CS(0)));
size = 0;
for (i = 0; i < DDR_MAX_CS; i++) {
u32 bank_base, bank_size;
bank_size = orion_read(DDR_SIZE_CS(i));
bank_base = orion_read(DDR_BASE_CS(i));
if (bank_size & DDR_BANK_EN) {
bank_size = DDR_REG_TO_SIZE(bank_size);
bank_base = DDR_REG_TO_BASE(bank_base);
orion_write(PCIE_WIN_BASE(i), bank_base & 0xffff0000);
orion_write(PCIE_WIN_REMAP(i), 0);
orion_write(PCIE_WIN_CTRL(i),
((bank_size-1) & 0xffff0000) |
(ATTR_DDR_CS(i) << 8) |
(TARGET_DDR << 4) |
(PCIE_DRAM_BAR << 1) | WIN_EN);
size += bank_size;
}
}
/*
* Setup BAR[1] to all DRAM banks
*/
orion_write(PCIE_BAR_LO(PCIE_DRAM_BAR), base & 0xffff0000);
orion_write(PCIE_BAR_HI(PCIE_DRAM_BAR), 0);
orion_write(PCIE_BAR_CTRL(PCIE_DRAM_BAR),
((size - 1) & 0xffff0000) | WIN_EN);
}
void __init orion_setup_pci_wins(void)
{
u32 base, size, i;
/*
* First, disable windows
*/
orion_write(PCI_BAR_ENABLE, 0xffffffff);
/*
* Setup windows for DDR banks.
*/
for (i = 0; i < DDR_MAX_CS; i++) {
base = orion_read(DDR_BASE_CS(i));
size = orion_read(DDR_SIZE_CS(i));
if (size & DDR_BANK_EN) {
u32 bus, dev, func, reg, val;
size = DDR_REG_TO_SIZE(size);
base = DDR_REG_TO_BASE(base);
bus = orion_pci_local_bus_nr();
dev = orion_pci_local_dev_nr();
func = PCI_CONF_FUNC_BAR_CS(i);
reg = PCI_CONF_REG_BAR_LO_CS(i);
orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val);
orion_pci_hw_wr_conf(bus, dev, func, reg, 4,
(base & 0xfffff000) | (val & 0xfff));
reg = PCI_CONF_REG_BAR_HI_CS(i);
orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0);
orion_write(PCI_BAR_SIZE_DDR_CS(i),
(size - 1) & 0xfffff000);
orion_write(PCI_BAR_REMAP_DDR_CS(i),
base & 0xfffff000);
orion_clrbits(PCI_BAR_ENABLE, (1 << i));
}
}
/*
* Disable automatic update of address remaping when writing to BARs
*/
orion_setbits(PCI_ADDR_DECODE_CTRL, 1);
}
void __init orion_setup_usb_wins(void)
{
int i;
u32 usb_if, dev, rev;
u32 max_usb_if = 1;
orion_pcie_id(&dev, &rev);
if (dev == MV88F5182_DEV_ID)
max_usb_if = 2;
for (usb_if = 0; usb_if < max_usb_if; usb_if++) {
/*
* First, disable and clear windows
*/
for (i = 0; i < USB_MAX_WIN; i++) {
orion_write(USB_WIN_BASE(usb_if, i), 0);
orion_write(USB_WIN_CTRL(usb_if, i), 0);
}
/*
* Setup windows for DDR banks.
*/
for (i = 0; i < DDR_MAX_CS; i++) {
u32 base, size;
size = orion_read(DDR_SIZE_CS(i));
base = orion_read(DDR_BASE_CS(i));
if (size & DDR_BANK_EN) {
base = DDR_REG_TO_BASE(base);
size = DDR_REG_TO_SIZE(size);
orion_write(USB_WIN_CTRL(usb_if, i),
((size-1) & 0xffff0000) |
(ATTR_DDR_CS(i) << 8) |
(TARGET_DDR << 4) | WIN_EN);
orion_write(USB_WIN_BASE(usb_if, i),
base & 0xffff0000);
}
}
}
}
void __init orion_setup_eth_wins(void)
{
int i;
/*
* First, disable and clear windows
*/
for (i = 0; i < ETH_MAX_WIN; i++) {
orion_write(ETH_WIN_BASE(i), 0);
orion_write(ETH_WIN_SIZE(i), 0);
orion_setbits(ETH_WIN_EN, 1 << i);
orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
if (i < ETH_MAX_REMAP_WIN)
orion_write(ETH_WIN_REMAP(i), 0);
}
/*
* Setup windows for DDR banks.
*/
for (i = 0; i < DDR_MAX_CS; i++) {
u32 base, size;
size = orion_read(DDR_SIZE_CS(i));
base = orion_read(DDR_BASE_CS(i));
if (size & DDR_BANK_EN) {
base = DDR_REG_TO_BASE(base);
size = DDR_REG_TO_SIZE(size);
orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
(ATTR_DDR_CS(i) << 8) |
TARGET_DDR);
orion_clrbits(ETH_WIN_EN, 1 << i);
orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
}
}
}
void __init orion_setup_sata_wins(void)
{
int i;
/*
* First, disable and clear windows
*/
for (i = 0; i < SATA_MAX_WIN; i++) {
orion_write(SATA_WIN_BASE(i), 0);
orion_write(SATA_WIN_CTRL(i), 0);
}
/*
* Setup windows for DDR banks.
*/
for (i = 0; i < DDR_MAX_CS; i++) {
u32 base, size;
size = orion_read(DDR_SIZE_CS(i));
base = orion_read(DDR_BASE_CS(i));
if (size & DDR_BANK_EN) {
base = DDR_REG_TO_BASE(base);
size = DDR_REG_TO_SIZE(size);
orion_write(SATA_WIN_CTRL(i),
((size-1) & 0xffff0000) |
(ATTR_DDR_CS(i) << 8) |
(TARGET_DDR << 4) | WIN_EN);
orion_write(SATA_WIN_BASE(i),
base & 0xffff0000);
}
}
}
