/*
* OMAP2/3 common powerdomain definitions
*
* Copyright (C) 2007-8 Texas Instruments, Inc.
* Copyright (C) 2007-8 Nokia Corporation
*
* Written by Paul Walmsley
* Debugging and integration fixes by Jouni Högander
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* To Do List
* -> Move the Sleep/Wakeup dependencies from Power Domain framework to
* Clock Domain Framework
*/
#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS
#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS
/*
* This file contains all of the powerdomains that have some element
* of software control for the OMAP24xx and OMAP34XX chips.
*
* A few notes:
*
* This is not an exhaustive listing of powerdomains on the chips; only
* powerdomains that can be controlled in software.
*
* A useful validation rule for struct powerdomain:
* Any powerdomain referenced by a wkdep_srcs or sleepdep_srcs array
* must have a dep_bit assigned. So wkdep_srcs/sleepdep_srcs are really
* just software-controllable dependencies. Non-software-controllable
* dependencies do exist, but they are not encoded below (yet).
*
* 24xx does not support programmable sleep dependencies (SLEEPDEP)
*
*/
/*
* The names for the DSP/IVA2 powerdomains are confusing.
*
* Most OMAP chips have an on-board DSP.
*
* On the 2420, this is a 'C55 DSP called, simply, the DSP. Its
* powerdomain is called the "DSP power domain." On the 2430, the
* on-board DSP is a 'C64 DSP, now called the IVA2 or IVA2.1. Its
* powerdomain is still called the "DSP power domain." On the 3430,
* the DSP is a 'C64 DSP like the 2430, also known as the IVA2; but
* its powerdomain is now called the "IVA2 power domain."
*
* The 2420 also has something called the IVA, which is a separate ARM
* core, and has nothing to do with the DSP/IVA2.
*
* Ideally the DSP/IVA2 could just be the same powerdomain, but the PRCM
* address offset is different between the C55 and C64 DSPs.
*
* The overly-specific dep_bit names are due to a bit name collision
* with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
* value are the same for all powerdomains: 2
*/
/*
* XXX should dep_bit be a mask, so we can test to see if it is 0 as a
* sanity check?
* XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
*/
#include <plat/powerdomain.h>
#include "prcm-common.h"
#include "prm.h"
#include "cm.h"
/* OMAP2/3-common powerdomains and wakeup dependencies */
#ifndef CONFIG_ARCH_OMAP4
/*
* 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
* 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
* 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
*/
static struct pwrdm_dep gfx_sgx_wkdeps[] = {
{
.pwrdm_name = "core_pwrdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
},
{
.pwrdm_name = "iva2_pwrdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
},
{
.pwrdm_name = "mpu_pwrdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
CHIP_IS_OMAP3430)
},
{
.pwrdm_name = "wkup_pwrdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
CHIP_IS_OMAP3430)
},
{ NULL },
};
/*
* 3430: CM_SLEEPDEP_CAM: MPU
* 3430ES1: CM_SLEEPDEP_GFX: MPU
* 3430ES2: CM_SLEEPDEP_SGX: MPU
*/
static struct pwrdm_dep cam_gfx_sleepdeps[] = {
{
.pwrdm_name = "mpu_pwrdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
},
{ NULL },
};
#endif
#include "powerdomains24xx.h"
#include "powerdomains34xx.h"
#include "powerdomains44xx.h"
/*
* OMAP2/3 common powerdomains
*/
#if defined(CONFIG_ARCH_OMAP24XX) | defined(CONFIG_ARCH_OMAP34XX)
/*
* The GFX powerdomain is not present on 3430ES2, but currently we do not
* have a macro to filter it out at compile-time.
*/
static struct powerdomain gfx_omap2_pwrdm = {
.name = "gfx_pwrdm",
.prcm_offs = GFX_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
CHIP_IS_OMAP3430ES1),
.wkdep_srcs = gfx_sgx_wkdeps,
.sleepdep_srcs = cam_gfx_sleepdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
},
.pwrsts_mem_on = {
[0] = PWRDM_POWER_ON, /* MEMONSTATE */
},
};
static struct powerdomain wkup_omap2_pwrdm = {
.name = "wkup_pwrdm",
.prcm_offs = WKUP_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
.dep_bit = OMAP_EN_WKUP_SHIFT,
};
#endif
/* As powerdomains are added or removed above, this list must also be changed */
static struct powerdomain *powerdomains_omap[] __initdata = {
#if defined(CONFIG_ARCH_OMAP24XX) | defined(CONFIG_ARCH_OMAP34XX)
&wkup_omap2_pwrdm,
&gfx_omap2_pwrdm,
#endif
#ifdef CONFIG_ARCH_OMAP24XX
&dsp_pwrdm,
&mpu_24xx_pwrdm,
&core_24xx_pwrdm,
#endif
#ifdef CONFIG_ARCH_OMAP2430
&mdm_pwrdm,
#endif
#ifdef CONFIG_ARCH_OMAP34XX
&iva2_pwrdm,
&mpu_34xx_pwrdm,
&neon_pwrdm,
&core_34xx_pre_es3_1_pwrdm,
&core_34xx_es3_1_pwrdm,
&cam_pwrdm,
&dss_pwrdm,
&per_pwrdm,
&emu_pwrdm,
&sgx_pwrdm,
&usbhost_pwrdm,
&dpll1_pwrdm,
&dpll2_pwrdm,
&dpll3_pwrdm,
&dpll4_pwrdm,
&dpll5_pwrdm,
#endif
#ifdef CONFIG_ARCH_OMAP4
&core_44xx_pwrdm,
&gfx_44xx_pwrdm,
&abe_44xx_pwrdm,
&dss_44xx_pwrdm,
&tesla_44xx_pwrdm,
&wkup_44xx_pwrdm,
&cpu0_44xx_pwrdm,
&cpu1_44xx_pwrdm,
&emu_44xx_pwrdm,
&mpu_44xx_pwrdm,
&ivahd_44xx_pwrdm,
&cam_44xx_pwrdm,
&l3init_44xx_pwrdm,
&l4per_44xx_pwrdm,
&always_on_core_44xx_pwrdm,
&cefuse_44xx_pwrdm,
#endif
NULL
};
#endif
