/*
* linux/arch/arm/mach-omap2/pm-domain.c
*
* Power domain functions for OMAP2
*
* Copyright (C) 2006 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
*
* Some code based on earlier OMAP2 sample PM code
* Copyright (C) 2005 Texas Instruments, Inc.
* Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <asm/io.h>
#include "prcm-regs.h"
/* Power domain offsets */
#define PM_MPU_OFFSET 0x100
#define PM_CORE_OFFSET 0x200
#define PM_GFX_OFFSET 0x300
#define PM_WKUP_OFFSET 0x400 /* Autoidle only */
#define PM_PLL_OFFSET 0x500 /* Autoidle only */
#define PM_DSP_OFFSET 0x800
#define PM_MDM_OFFSET 0xc00
/* Power domain wake-up dependency control register */
#define PM_WKDEP_OFFSET 0xc8
#define EN_MDM (1 << 5)
#define EN_WKUP (1 << 4)
#define EN_GFX (1 << 3)
#define EN_DSP (1 << 2)
#define EN_MPU (1 << 1)
#define EN_CORE (1 << 0)
/* Core power domain state transition control register */
#define PM_PWSTCTRL_OFFSET 0xe0
#define FORCESTATE (1 << 18) /* Only for DSP & GFX */
#define MEM4RETSTATE (1 << 6)
#define MEM3RETSTATE (1 << 5)
#define MEM2RETSTATE (1 << 4)
#define MEM1RETSTATE (1 << 3)
#define LOGICRETSTATE (1 << 2) /* Logic is retained */
#define POWERSTATE_OFF 0x3
#define POWERSTATE_RETENTION 0x1
#define POWERSTATE_ON 0x0
/* Power domain state register */
#define PM_PWSTST_OFFSET 0xe4
/* Hardware supervised state transition control register */
#define CM_CLKSTCTRL_OFFSET 0x48
#define AUTOSTAT_MPU (1 << 0) /* MPU */
#define AUTOSTAT_DSS (1 << 2) /* Core */
#define AUTOSTAT_L4 (1 << 1) /* Core */
#define AUTOSTAT_L3 (1 << 0) /* Core */
#define AUTOSTAT_GFX (1 << 0) /* GFX */
#define AUTOSTAT_IVA (1 << 8) /* 2420 IVA in DSP domain */
#define AUTOSTAT_DSP (1 << 0) /* DSP */
#define AUTOSTAT_MDM (1 << 0) /* MDM */
/* Automatic control of interface clock idling */
#define CM_AUTOIDLE1_OFFSET 0x30
#define CM_AUTOIDLE2_OFFSET 0x34 /* Core only */
#define CM_AUTOIDLE3_OFFSET 0x38 /* Core only */
#define CM_AUTOIDLE4_OFFSET 0x3c /* Core only */
#define AUTO_54M(x) (((x) & 0x3) << 6)
#define AUTO_96M(x) (((x) & 0x3) << 2)
#define AUTO_DPLL(x) (((x) & 0x3) << 0)
#define AUTO_STOPPED 0x3
#define AUTO_BYPASS_FAST 0x2 /* DPLL only */
#define AUTO_BYPASS_LOW_POWER 0x1 /* DPLL only */
#define AUTO_DISABLED 0x0
/* Voltage control PRCM_VOLTCTRL bits */
#define AUTO_EXTVOLT (1 << 15)
#define FORCE_EXTVOLT (1 << 14)
#define SETOFF_LEVEL(x) (((x) & 0x3) << 12)
#define MEMRETCTRL (1 << 8)
#define SETRET_LEVEL(x) (((x) & 0x3) << 6)
#define VOLT_LEVEL(x) (((x) & 0x3) << 0)
#define OMAP24XX_PRCM_VBASE IO_ADDRESS(OMAP24XX_PRCM_BASE)
#define prcm_readl(r) __raw_readl(OMAP24XX_PRCM_VBASE + (r))
#define prcm_writel(v, r) __raw_writel((v), OMAP24XX_PRCM_VBASE + (r))
static u32 pmdomain_get_wakeup_dependencies(int domain_offset)
{
return prcm_readl(domain_offset + PM_WKDEP_OFFSET);
}
static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset)
{
prcm_writel(state, domain_offset + PM_WKDEP_OFFSET);
}
static u32 pmdomain_get_powerstate(int domain_offset)
{
return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET);
}
static void pmdomain_set_powerstate(u32 state, int domain_offset)
{
prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET);
}
static u32 pmdomain_get_clock_autocontrol(int domain_offset)
{
return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET);
}
static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset)
{
prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET);
}
static u32 pmdomain_get_clock_autoidle1(int domain_offset)
{
return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET);
}
/* Core domain only */
static u32 pmdomain_get_clock_autoidle2(int domain_offset)
{
return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET);
}
/* Core domain only */
static u32 pmdomain_get_clock_autoidle3(int domain_offset)
{
return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET);
}
/* Core domain only */
static u32 pmdomain_get_clock_autoidle4(int domain_offset)
{
return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET);
}
static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset)
{
prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset);
}
/* Core domain only */
static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset)
{
prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset);
}
/* Core domain only */
static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset)
{
prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset);
}
/* Core domain only */
static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset)
{
prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset);
}
/*
* Configures power management domains to idle clocks automatically.
*/
void pmdomain_set_autoidle(void)
{
u32 val;
/* Set PLL auto stop for 54M, 96M & DPLL */
pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) |
AUTO_96M(AUTO_STOPPED) |
AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET);
/* External clock input control
* REVISIT: Should this be in clock framework?
*/
PRCM_CLKSRC_CTRL |= (0x3 << 3);
/* Configure number of 32KHz clock cycles for sys_clk */
PRCM_CLKSSETUP = 0x00ff;
/* Configure automatic voltage transition */
PRCM_VOLTSETUP = 0;
val = PRCM_VOLTCTRL;
val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3));
val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT;
PRCM_VOLTCTRL = val;
/* Disable emulation tools functional clock */
PRCM_CLKEMUL_CTRL = 0x0;
/* Set core memory retention state */
val = pmdomain_get_powerstate(PM_CORE_OFFSET);
if (cpu_is_omap2420()) {
val &= ~(0x7 << 3);
val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE);
} else {
val &= ~(0xf << 3);
val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE |
MEM1RETSTATE);
}
pmdomain_set_powerstate(val, PM_CORE_OFFSET);
/* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */
val = SMS_SYSCONFIG;
val &= ~(0x3 << 3);
val |= (0x2 << 3) | (1 << 0);
SMS_SYSCONFIG |= val;
val = SDRC_SYSCONFIG;
val &= ~(0x3 << 3);
val |= (0x2 << 3);
SDRC_SYSCONFIG = val;
/* Configure L3 interface for smart idle.
* REVISIT: Enable autoidle bit0 ?
*/
val = GPMC_SYSCONFIG;
val &= ~(0x3 << 3);
val |= (0x2 << 3) | (1 << 0);
GPMC_SYSCONFIG = val;
pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION,
PM_MPU_OFFSET);
pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET);
if (!cpu_is_omap2420())
pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET);
/* Assume suspend function has saved the state for DSP and GFX */
pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET);
pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET);
#if 0
/* REVISIT: Internal USB needs special handling */
force_standby_usb();
if (cpu_is_omap2430())
force_hsmmc();
sdram_self_refresh_on_idle_req(1);
#endif
/* Enable clock auto control for all domains.
* Note that CORE domain includes also DSS, L4 & L3.
*/
pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET);
pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET);
pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3,
PM_CORE_OFFSET);
if (cpu_is_omap2420())
pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP,
PM_DSP_OFFSET);
else {
pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET);
pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET);
}
/* Enable clock autoidle for all domains */
pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET);
if (cpu_is_omap2420()) {
pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET);
pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET);
pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET);
} else {
pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET);
pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET);
pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET);
pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET);
}
pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET);
pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET);
}
/*
* Initializes power domains by removing wake-up dependencies and powering
* down DSP and GFX. Gets called from PM init. Note that DSP and IVA code
* must re-enable DSP and GFX when used.
*/
void __init pmdomain_init(void)
{
/* Remove all domain wakeup dependencies */
pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET);
pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET);
pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET);
pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET);
if (cpu_is_omap2430())
pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET);
/* Power down DSP and GFX */
pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET);
pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET);
}
