/*
* Copyright (C) 2012 Texas Instruments, Inc..
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
/*
* NOTE: this is a transitional file to help with DT adaptation.
* This file will be removed when DSS supports DT.
*/
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#include <video/omap-panel-nokia-dsi.h>
#include <video/omap-panel-picodlp.h>
#include <plat/cpu.h>
#include "dss-common.h"
#include "mux.h"
#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
#define HDMI_GPIO_HPD 63 /* Hotplug detect */
/* Display DVI */
#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
/* Using generic display panel */
static struct tfp410_platform_data omap4_dvi_panel = {
.i2c_bus_num = 3,
.power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
};
static struct omap_dss_device omap4_panda_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "tfp410",
.data = &omap4_dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
.channel = OMAP_DSS_CHANNEL_LCD2,
};
static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
.ls_oe_gpio = HDMI_GPIO_LS_OE,
.hpd_gpio = HDMI_GPIO_HPD,
};
static struct omap_dss_device omap4_panda_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.type = OMAP_DISPLAY_TYPE_HDMI,
.channel = OMAP_DSS_CHANNEL_DIGIT,
.data = &omap4_panda_hdmi_data,
};
static struct omap_dss_device *omap4_panda_dss_devices[] = {
&omap4_panda_dvi_device,
&omap4_panda_hdmi_device,
};
static struct omap_dss_board_info omap4_panda_dss_data = {
.num_devices = ARRAY_SIZE(omap4_panda_dss_devices),
.devices = omap4_panda_dss_devices,
.default_device = &omap4_panda_dvi_device,
};
void __init omap4_panda_display_init(void)
{
omap_display_init(&omap4_panda_dss_data);
/*
* OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
* later have external pull up on the HDMI I2C lines
*/
if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
void __init omap4_panda_display_init_of(void)
{
omap_display_init(&omap4_panda_dss_data);
}
/* OMAP4 Blaze display data */
#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
#define DLP_POWER_ON_GPIO 40
static struct nokia_dsi_panel_data dsi1_panel = {
.name = "taal",
.reset_gpio = 102,
.use_ext_te = false,
.ext_te_gpio = 101,
.esd_interval = 0,
.pin_config = {
.num_pins = 6,
.pins = { 0, 1, 2, 3, 4, 5 },
},
};
static struct omap_dss_device sdp4430_lcd_device = {
.name = "lcd",
.driver_name = "taal",
.type = OMAP_DISPLAY_TYPE_DSI,
.data = &dsi1_panel,
.phy.dsi = {
.module = 0,
},
.channel = OMAP_DSS_CHANNEL_LCD,
};
static struct nokia_dsi_panel_data dsi2_panel = {
.name = "taal",
.reset_gpio = 104,
.use_ext_te = false,
.ext_te_gpio = 103,
.esd_interval = 0,
.pin_config = {
.num_pins = 6,
.pins = { 0, 1, 2, 3, 4, 5 },
},
};
static struct omap_dss_device sdp4430_lcd2_device = {
.name = "lcd2",
.driver_name = "taal",
.type = OMAP_DISPLAY_TYPE_DSI,
.data = &dsi2_panel,
.phy.dsi = {
.module = 1,
},
.channel = OMAP_DSS_CHANNEL_LCD2,
};
static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
.ls_oe_gpio = HDMI_GPIO_LS_OE,
.hpd_gpio = HDMI_GPIO_HPD,
};
static struct omap_dss_device sdp4430_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.type = OMAP_DISPLAY_TYPE_HDMI,
.channel = OMAP_DSS_CHANNEL_DIGIT,
.data = &sdp4430_hdmi_data,
};
static struct picodlp_panel_data sdp4430_picodlp_pdata = {
.picodlp_adapter_id = 2,
.emu_done_gpio = 44,
.pwrgood_gpio = 45,
};
static void sdp4430_picodlp_init(void)
{
int r;
const struct gpio picodlp_gpios[] = {
{DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
"DLP POWER ON"},
{sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
"DLP EMU DONE"},
{sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
"DLP PWRGOOD"},
};
r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
if (r)
pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
}
static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
{
gpio_set_value(DISPLAY_SEL_GPIO, 0);
gpio_set_value(DLP_POWER_ON_GPIO, 1);
return 0;
}
static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
{
gpio_set_value(DLP_POWER_ON_GPIO, 0);
gpio_set_value(DISPLAY_SEL_GPIO, 1);
}
static struct omap_dss_device sdp4430_picodlp_device = {
.name = "picodlp",
.driver_name = "picodlp_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.channel = OMAP_DSS_CHANNEL_LCD2,
.platform_enable = sdp4430_panel_enable_picodlp,
.platform_disable = sdp4430_panel_disable_picodlp,
.data = &sdp4430_picodlp_pdata,
};
static struct omap_dss_device *sdp4430_dss_devices[] = {
&sdp4430_lcd_device,
&sdp4430_lcd2_device,
&sdp4430_hdmi_device,
&sdp4430_picodlp_device,
};
static struct omap_dss_board_info sdp4430_dss_data = {
.num_devices = ARRAY_SIZE(sdp4430_dss_devices),
.devices = sdp4430_dss_devices,
.default_device = &sdp4430_lcd_device,
};
void __init omap_4430sdp_display_init(void)
{
int r;
/* Enable LCD2 by default (instead of Pico DLP) */
r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
"display_sel");
if (r)
pr_err("%s: Could not get display_sel GPIO\n", __func__);
sdp4430_picodlp_init();
omap_display_init(&sdp4430_dss_data);
/*
* OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
* later have external pull up on the HDMI I2C lines
*/
if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
void __init omap_4430sdp_display_init_of(void)
{
int r;
/* Enable LCD2 by default (instead of Pico DLP) */
r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
"display_sel");
if (r)
pr_err("%s: Could not get display_sel GPIO\n", __func__);
sdp4430_picodlp_init();
omap_display_init(&sdp4430_dss_data);
}
