/*
* arch/arm/mach-lpc32xx/common.c
*
* Author: Kevin Wells <kevin.wells@nxp.com>
*
* Copyright (C) 2010 NXP Semiconductors
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/i2c-pnx.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/i2c.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include "common.h"
/*
* Watchdog timer
*/
static struct resource watchdog_resources[] = {
[0] = {
.start = LPC32XX_WDTIM_BASE,
.end = LPC32XX_WDTIM_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device lpc32xx_watchdog_device = {
.name = "pnx4008-watchdog",
.id = -1,
.num_resources = ARRAY_SIZE(watchdog_resources),
.resource = watchdog_resources,
};
/*
* I2C busses
*/
static struct i2c_pnx_data i2c0_data = {
.name = I2C_CHIP_NAME "1",
.base = LPC32XX_I2C1_BASE,
.irq = IRQ_LPC32XX_I2C_1,
};
static struct i2c_pnx_data i2c1_data = {
.name = I2C_CHIP_NAME "2",
.base = LPC32XX_I2C2_BASE,
.irq = IRQ_LPC32XX_I2C_2,
};
static struct i2c_pnx_data i2c2_data = {
.name = "USB-I2C",
.base = LPC32XX_OTG_I2C_BASE,
.irq = IRQ_LPC32XX_USB_I2C,
};
struct platform_device lpc32xx_i2c0_device = {
.name = "pnx-i2c",
.id = 0,
.dev = {
.platform_data = &i2c0_data,
},
};
struct platform_device lpc32xx_i2c1_device = {
.name = "pnx-i2c",
.id = 1,
.dev = {
.platform_data = &i2c1_data,
},
};
struct platform_device lpc32xx_i2c2_device = {
.name = "pnx-i2c",
.id = 2,
.dev = {
.platform_data = &i2c2_data,
},
};
/*
* Returns the unique ID for the device
*/
void lpc32xx_get_uid(u32 devid[4])
{
int i;
for (i = 0; i < 4; i++)
devid[i] = __raw_readl(LPC32XX_CLKPWR_DEVID(i << 2));
}
/*
* Returns SYSCLK source
* 0 = PLL397, 1 = main oscillator
*/
int clk_is_sysclk_mainosc(void)
{
if ((__raw_readl(LPC32XX_CLKPWR_SYSCLK_CTRL) &
LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX) == 0)
return 1;
return 0;
}
/*
* System reset via the watchdog timer
*/
void lpc32xx_watchdog_reset(void)
{
/* Make sure WDT clocks are enabled */
__raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
LPC32XX_CLKPWR_TIMER_CLK_CTRL);
/* Instant assert of RESETOUT_N with pulse length 1mS */
__raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18));
__raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC));
}
/*
* Detects and returns IRAM size for the device variation
*/
#define LPC32XX_IRAM_BANK_SIZE SZ_128K
static u32 iram_size;
u32 lpc32xx_return_iram_size(void)
{
if (iram_size == 0) {
u32 savedval1, savedval2;
void __iomem *iramptr1, *iramptr2;
iramptr1 = io_p2v(LPC32XX_IRAM_BASE);
iramptr2 = io_p2v(LPC32XX_IRAM_BASE + LPC32XX_IRAM_BANK_SIZE);
savedval1 = __raw_readl(iramptr1);
savedval2 = __raw_readl(iramptr2);
if (savedval1 == savedval2) {
__raw_writel(savedval2 + 1, iramptr2);
if (__raw_readl(iramptr1) == savedval2 + 1)
iram_size = LPC32XX_IRAM_BANK_SIZE;
else
iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
__raw_writel(savedval2, iramptr2);
} else
iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
}
return iram_size;
}
/*
* Computes PLL rate from PLL register and input clock
*/
u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup)
{
u32 ilfreq, p, m, n, fcco, fref, cfreq;
int mode;
/*
* PLL requirements
* ifreq must be >= 1MHz and <= 20MHz
* FCCO must be >= 156MHz and <= 320MHz
* FREF must be >= 1MHz and <= 27MHz
* Assume the passed input data is not valid
*/
ilfreq = ifreq;
m = pllsetup->pll_m;
n = pllsetup->pll_n;
p = pllsetup->pll_p;
mode = (pllsetup->cco_bypass_b15 << 2) |
(pllsetup->direct_output_b14 << 1) |
pllsetup->fdbk_div_ctrl_b13;
switch (mode) {
case 0x0: /* Non-integer mode */
cfreq = (m * ilfreq) / (2 * p * n);
fcco = (m * ilfreq) / n;
fref = ilfreq / n;
break;
case 0x1: /* integer mode */
cfreq = (m * ilfreq) / n;
fcco = (m * ilfreq) / (n * 2 * p);
fref = ilfreq / n;
break;
case 0x2:
case 0x3: /* Direct mode */
cfreq = (m * ilfreq) / n;
fcco = cfreq;
fref = ilfreq / n;
break;
case 0x4:
case 0x5: /* Bypass mode */
cfreq = ilfreq / (2 * p);
fcco = 156000000;
fref = 1000000;
break;
case 0x6:
case 0x7: /* Direct bypass mode */
default:
cfreq = ilfreq;
fcco = 156000000;
fref = 1000000;
break;
}
if (fcco < 156000000 || fcco > 320000000)
cfreq = 0;
if (fref < 1000000 || fref > 27000000)
cfreq = 0;
return (u32) cfreq;
}
u32 clk_get_pclk_div(void)
{
return 1 + ((__raw_readl(LPC32XX_CLKPWR_HCLK_DIV) >> 2) & 0x1F);
}
static struct map_desc lpc32xx_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(LPC32XX_AHB0_START),
.pfn = __phys_to_pfn(LPC32XX_AHB0_START),
.length = LPC32XX_AHB0_SIZE,
.type = MT_DEVICE
},
{
.virtual = IO_ADDRESS(LPC32XX_AHB1_START),
.pfn = __phys_to_pfn(LPC32XX_AHB1_START),
.length = LPC32XX_AHB1_SIZE,
.type = MT_DEVICE
},
{
.virtual = IO_ADDRESS(LPC32XX_FABAPB_START),
.pfn = __phys_to_pfn(LPC32XX_FABAPB_START),
.length = LPC32XX_FABAPB_SIZE,
.type = MT_DEVICE
},
{
.virtual = IO_ADDRESS(LPC32XX_IRAM_BASE),
.pfn = __phys_to_pfn(LPC32XX_IRAM_BASE),
.length = (LPC32XX_IRAM_BANK_SIZE * 2),
.type = MT_DEVICE
},
};
void __init lpc32xx_map_io(void)
{
iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
}
