/*
* linux/arch/arm/kernel/entry-armv.S
*
* Copyright (C) 1996,1997,1998 Russell King.
* ARM700 fix by Matthew Godbolt (linux-user@willothewisp.demon.co.uk)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Low-level vector interface routines
*
* Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction that causes
* it to save wrong values... Be aware!
*/
#include <linux/config.h>
#include <asm/glue.h>
#include <asm/vfpmacros.h>
#include <asm/hardware.h> @ should be moved into entry-macro.S
#include <asm/arch/irqs.h> @ should be moved into entry-macro.S
#include <asm/arch/entry-macro.S>
#include "entry-header.S"
/*
* Invalid mode handlers
*/
.macro inv_entry, sym, reason
sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
stmia sp, {r0 - lr} @ Save XXX r0 - lr
ldr r4, .LC\sym
mov r1, #\reason
.endm
__pabt_invalid:
inv_entry abt, BAD_PREFETCH
b 1f
__dabt_invalid:
inv_entry abt, BAD_DATA
b 1f
__irq_invalid:
inv_entry irq, BAD_IRQ
b 1f
__und_invalid:
inv_entry und, BAD_UNDEFINSTR
1: zero_fp
ldmia r4, {r5 - r7} @ Get XXX pc, cpsr, old_r0
add r4, sp, #S_PC
stmia r4, {r5 - r7} @ Save XXX pc, cpsr, old_r0
mov r0, sp
and r2, r6, #31 @ int mode
b bad_mode
/*
* SVC mode handlers
*/
.macro svc_entry, sym
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ save r0 - r12
ldr r2, .LC\sym
add r0, sp, #S_FRAME_SIZE
ldmia r2, {r2 - r4} @ get pc, cpsr
add r5, sp, #S_SP
mov r1, lr
@
@ We are now ready to fill in the remaining blanks on the stack:
@
@ r0 - sp_svc
@ r1 - lr_svc
@ r2 - lr_<exception>, already fixed up for correct return/restart
@ r3 - spsr_<exception>
@ r4 - orig_r0 (see pt_regs definition in ptrace.h)
@
stmia r5, {r0 - r4}
.endm
.align 5
__dabt_svc:
svc_entry abt
@
@ get ready to re-enable interrupts if appropriate
@
mrs r9, cpsr
tst r3, #PSR_I_BIT
biceq r9, r9, #PSR_I_BIT
@
@ Call the processor-specific abort handler:
@
@ r2 - aborted context pc
@ r3 - aborted context cpsr
@
@ The abort handler must return the aborted address in r0, and
@ the fault status register in r1. r9 must be preserved.
@
#ifdef MULTI_ABORT
ldr r4, .LCprocfns
mov lr, pc
ldr pc, [r4]
#else
bl CPU_ABORT_HANDLER
#endif
@
@ set desired IRQ state, then call main handler
@
msr cpsr_c, r9
mov r2, sp
bl do_DataAbort
@
@ IRQs off again before pulling preserved data off the stack
@
disable_irq
@
@ restore SPSR and restart the instruction
@
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.align 5
__irq_svc:
svc_entry irq
#ifdef CONFIG_PREEMPT
get_thread_info r8
ldr r9, [r8, #TI_PREEMPT] @ get preempt count
add r7, r9, #1 @ increment it
str r7, [r8, #TI_PREEMPT]
#endif
1: get_irqnr_and_base r0, r6, r5, lr
movne r1, sp
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
@
adrne lr, 1b
bne asm_do_IRQ
#ifdef CONFIG_PREEMPT
ldr r0, [r8, #TI_FLAGS] @ get flags
tst r0, #_TIF_NEED_RESCHED
blne svc_preempt
preempt_return:
ldr r0, [r8, #TI_PREEMPT] @ read preempt value
teq r0, r7
str r9, [r8, #TI_PREEMPT] @ restore preempt count
strne r0, [r0, -r0] @ bug()
#endif
ldr r0, [sp, #S_PSR] @ irqs are already disabled
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.ltorg
#ifdef CONFIG_PREEMPT
svc_preempt:
teq r9, #0 @ was preempt count = 0
ldreq r6, .LCirq_stat
movne pc, lr @ no
ldr r0, [r6, #4] @ local_irq_count
ldr r1, [r6, #8] @ local_bh_count
adds r0, r0, r1
movne pc, lr
mov r7, #0 @ preempt_schedule_irq
str r7, [r8, #TI_PREEMPT] @ expects preempt_count == 0
1: bl preempt_schedule_irq @ irq en/disable is done inside
ldr r0, [r8, #TI_FLAGS] @ get new tasks TI_FLAGS
tst r0, #_TIF_NEED_RESCHED
beq preempt_return @ go again
b 1b
#endif
.align 5
__und_svc:
svc_entry und
@
@ call emulation code, which returns using r9 if it has emulated
@ the instruction, or the more conventional lr if we are to treat
@ this as a real undefined instruction
@
@ r0 - instruction
@
ldr r0, [r2, #-4]
adr r9, 1f
bl call_fpe
mov r0, sp @ struct pt_regs *regs
bl do_undefinstr
@
@ IRQs off again before pulling preserved data off the stack
@
1: disable_irq
@
@ restore SPSR and restart the instruction
@
ldr lr, [sp, #S_PSR] @ Get SVC cpsr
msr spsr_cxsf, lr
ldmia sp, {r0 - pc}^ @ Restore SVC registers
.align 5
__pabt_svc:
svc_entry abt
@
@ re-enable interrupts if appropriate
@
mrs r9, cpsr
tst r3, #PSR_I_BIT
biceq r9, r9, #PSR_I_BIT
msr cpsr_c, r9
@
@ set args, then call main handler
@
@ r0 - address of faulting instruction
@ r1 - pointer to registers on stack
@
mov r0, r2 @ address (pc)
mov r1, sp @ regs
bl do_PrefetchAbort @ call abort handler
@
@ IRQs off again before pulling preserved data off the stack
@
disable_irq
@
@ restore SPSR and restart the instruction
@
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.align 5
.LCirq:
.word __temp_irq
.LCund:
.word __temp_und
.LCabt:
.word __temp_abt
#ifdef MULTI_ABORT
.LCprocfns:
.word processor
#endif
.LCfp:
.word fp_enter
#ifdef CONFIG_PREEMPT
.LCirq_stat:
.word irq_stat
#endif
/*
* User mode handlers
*/
.macro usr_entry, sym
sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
stmia sp, {r0 - r12} @ save r0 - r12
ldr r7, .LC\sym
add r5, sp, #S_PC
ldmia r7, {r2 - r4} @ Get USR pc, cpsr
#if __LINUX_ARM_ARCH__ < 6
@ make sure our user space atomic helper is aborted
cmp r2, #VIRT_OFFSET
bichs r3, r3, #PSR_Z_BIT
#endif
@
@ We are now ready to fill in the remaining blanks on the stack:
@
@ r2 - lr_<exception>, already fixed up for correct return/restart
@ r3 - spsr_<exception>
@ r4 - orig_r0 (see pt_regs definition in ptrace.h)
@
@ Also, separately save sp_usr and lr_usr
@
stmia r5, {r2 - r4}
stmdb r5, {sp, lr}^
@
@ Enable the alignment trap while in kernel mode
@
alignment_trap r7, r0, __temp_\sym
@
@ Clear FP to mark the first stack frame
@
zero_fp
.endm
.align 5
__dabt_usr:
usr_entry abt
@
@ Call the processor-specific abort handler:
@
@ r2 - aborted context pc
@ r3 - aborted context cpsr
@
@ The abort handler must return the aborted address in r0, and
@ the fault status register in r1.
@
#ifdef MULTI_ABORT
ldr r4, .LCprocfns
mov lr, pc
ldr pc, [r4]
#else
bl CPU_ABORT_HANDLER
#endif
@
@ IRQs on, then call the main handler
@
enable_irq
mov r2, sp
adr lr, ret_from_exception
b do_DataAbort
.align 5
__irq_usr:
usr_entry irq
#ifdef CONFIG_PREEMPT
get_thread_info r8
ldr r9, [r8, #TI_PREEMPT] @ get preempt count
add r7, r9, #1 @ increment it
str r7, [r8, #TI_PREEMPT]
#endif
1: get_irqnr_and_base r0, r6, r5, lr
movne r1, sp
adrne lr, 1b
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
@
bne asm_do_IRQ
#ifdef CONFIG_PREEMPT
ldr r0, [r8, #TI_PREEMPT]
teq r0, r7
str r9, [r8, #TI_PREEMPT]
strne r0, [r0, -r0]
mov tsk, r8
#else
get_thread_info tsk
#endif
mov why, #0
b ret_to_user
.ltorg
.align 5
__und_usr:
usr_entry und
tst r3, #PSR_T_BIT @ Thumb mode?
bne fpundefinstr @ ignore FP
sub r4, r2, #4
@
@ fall through to the emulation code, which returns using r9 if
@ it has emulated the instruction, or the more conventional lr
@ if we are to treat this as a real undefined instruction
@
@ r0 - instruction
@
1: ldrt r0, [r4]
adr r9, ret_from_exception
adr lr, fpundefinstr
@
@ fallthrough to call_fpe
@
/*
* The out of line fixup for the ldrt above.
*/
.section .fixup, "ax"
2: mov pc, r9
.previous
.section __ex_table,"a"
.long 1b, 2b
.previous
/*
* Check whether the instruction is a co-processor instruction.
* If yes, we need to call the relevant co-processor handler.
*
* Note that we don't do a full check here for the co-processor
* instructions; all instructions with bit 27 set are well
* defined. The only instructions that should fault are the
* co-processor instructions. However, we have to watch out
* for the ARM6/ARM7 SWI bug.
*
* Emulators may wish to make use of the following registers:
* r0 = instruction opcode.
* r2 = PC+4
* r10 = this threads thread_info structure.
*/
call_fpe:
tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27
#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710)
and r8, r0, #0x0f000000 @ mask out op-code bits
teqne r8, #0x0f000000 @ SWI (ARM6/7 bug)?
#endif
moveq pc, lr
get_thread_info r10 @ get current thread
and r8, r0, #0x00000f00 @ mask out CP number
mov r7, #1
add r6, r10, #TI_USED_CP
strb r7, [r6, r8, lsr #8] @ set appropriate used_cp[]
#ifdef CONFIG_IWMMXT
@ Test if we need to give access to iWMMXt coprocessors
ldr r5, [r10, #TI_FLAGS]
rsbs r7, r8, #(1 << 8) @ CP 0 or 1 only
movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1)
bcs iwmmxt_task_enable
#endif
enable_irq
add pc, pc, r8, lsr #6
mov r0, r0
mov pc, lr @ CP#0
b do_fpe @ CP#1 (FPE)
b do_fpe @ CP#2 (FPE)
mov pc, lr @ CP#3
mov pc, lr @ CP#4
mov pc, lr @ CP#5
mov pc, lr @ CP#6
mov pc, lr @ CP#7
mov pc, lr @ CP#8
mov pc, lr @ CP#9
#ifdef CONFIG_VFP
b do_vfp @ CP#10 (VFP)
b do_vfp @ CP#11 (VFP)
#else
mov pc, lr @ CP#10 (VFP)
mov pc, lr @ CP#11 (VFP)
#endif
mov pc, lr @ CP#12
mov pc, lr @ CP#13
mov pc, lr @ CP#14 (Debug)
mov pc, lr @ CP#15 (Control)
do_fpe:
ldr r4, .LCfp
add r10, r10, #TI_FPSTATE @ r10 = workspace
ldr pc, [r4] @ Call FP module USR entry point
/*
* The FP module is called with these registers set:
* r0 = instruction
* r2 = PC+4
* r9 = normal "successful" return address
* r10 = FP workspace
* lr = unrecognised FP instruction return address
*/
.data
ENTRY(fp_enter)
.word fpundefinstr
.text
fpundefinstr:
mov r0, sp
adr lr, ret_from_exception
b do_undefinstr
.align 5
__pabt_usr:
usr_entry abt
enable_irq @ Enable interrupts
mov r0, r2 @ address (pc)
mov r1, sp @ regs
bl do_PrefetchAbort @ call abort handler
/* fall through */
/*
* This is the return code to user mode for abort handlers
*/
ENTRY(ret_from_exception)
get_thread_info tsk
mov why, #0
b ret_to_user
/*
* Register switch for ARMv3 and ARMv4 processors
* r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
* previous and next are guaranteed not to be the same.
*/
ENTRY(__switch_to)
add ip, r1, #TI_CPU_SAVE
ldr r3, [r2, #TI_TP_VALUE]
stmia ip!, {r4 - sl, fp, sp, lr} @ Store most regs on stack
ldr r6, [r2, #TI_CPU_DOMAIN]!
#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
mra r4, r5, acc0
stmia ip, {r4, r5}
#endif
#ifdef CONFIG_HAS_TLS_REG
mcr p15, 0, r3, c13, c0, 3 @ set TLS register
#else
mov r4, #0xffff0fff
str r3, [r4, #-15] @ TLS val at 0xffff0ff0
#endif
mcr p15, 0, r6, c3, c0, 0 @ Set domain register
#ifdef CONFIG_VFP
@ Always disable VFP so we can lazily save/restore the old
@ state. This occurs in the context of the previous thread.
VFPFMRX r4, FPEXC
bic r4, r4, #FPEXC_ENABLE
VFPFMXR FPEXC, r4
#endif
#if defined(CONFIG_IWMMXT)
bl iwmmxt_task_switch
#elif defined(CONFIG_CPU_XSCALE)
add r4, r2, #40 @ cpu_context_save->extra
ldmib r4, {r4, r5}
mar acc0, r4, r5
#endif
ldmib r2, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
__INIT
/*
* User helpers.
*
* These are segment of kernel provided user code reachable from user space
* at a fixed address in kernel memory. This is used to provide user space
* with some operations which require kernel help because of unimplemented
* native feature and/or instructions in many ARM CPUs. The idea is for
* this code to be executed directly in user mode for best efficiency but
* which is too intimate with the kernel counter part to be left to user
* libraries. In fact this code might even differ from one CPU to another
* depending on the available instruction set and restrictions like on
* SMP systems. In other words, the kernel reserves the right to change
* this code as needed without warning. Only the entry points and their
* results are guaranteed to be stable.
*
* Each segment is 32-byte aligned and will be moved to the top of the high
* vector page. New segments (if ever needed) must be added in front of
* existing ones. This mechanism should be used only for things that are
* really small and justified, and not be abused freely.
*
* User space is expected to implement those things inline when optimizing
* for a processor that has the necessary native support, but only if such
* resulting binaries are already to be incompatible with earlier ARM
* processors due to the use of unsupported instructions other than what
* is provided here. In other words don't make binaries unable to run on
* earlier processors just for the sake of not using these kernel helpers
* if your compiled code is not going to use the new instructions for other
* purpose.
*/
.align 5
.globl __kuser_helper_start
__kuser_helper_start:
/*
* Reference prototype:
*
* int __kernel_cmpxchg(int oldval, int newval, int *ptr)
*
* Input:
*
* r0 = oldval
* r1 = newval
* r2 = ptr
* lr = return address
*
* Output:
*
* r0 = returned value (zero or non-zero)
* C flag = set if r0 == 0, clear if r0 != 0
*
* Clobbered:
*
* r3, ip, flags
*
* Definition and user space usage example:
*
* typedef int (__kernel_cmpxchg_t)(int oldval, int newval, int *ptr);
* #define __kernel_cmpxchg (*(__kernel_cmpxchg_t *)0xffff0fc0)
*
* Atomically store newval in *ptr if *ptr is equal to oldval for user space.
* Return zero if *ptr was changed or non-zero if no exchange happened.
* The C flag is also set if *ptr was changed to allow for assembly
* optimization in the calling code.
*
* For example, a user space atomic_add implementation could look like this:
*
* #define atomic_add(ptr, val) \
* ({ register unsigned int *__ptr asm("r2") = (ptr); \
* register unsigned int __result asm("r1"); \
* asm volatile ( \
* "1: @ atomic_add\n\t" \
* "ldr r0, [r2]\n\t" \
* "mov r3, #0xffff0fff\n\t" \
* "add lr, pc, #4\n\t" \
* "add r1, r0, %2\n\t" \
* "add pc, r3, #(0xffff0fc0 - 0xffff0fff)\n\t" \
* "bcc 1b" \
* : "=&r" (__result) \
* : "r" (__ptr), "rIL" (val) \
* : "r0","r3","ip","lr","cc","memory" ); \
* __result; })
*/
__kuser_cmpxchg: @ 0xffff0fc0
#if __LINUX_ARM_ARCH__ < 6
#ifdef CONFIG_SMP /* sanity check */
#error "CONFIG_SMP on a machine supporting pre-ARMv6 processors?"
#endif
/*
* Theory of operation:
*
* We set the Z flag before loading oldval. If ever an exception
* occurs we can not be sure the loaded value will still be the same
* when the exception returns, therefore the user exception handler
* will clear the Z flag whenever the interrupted user code was
* actually from the kernel address space (see the usr_entry macro).
*
* The post-increment on the str is used to prevent a race with an
* exception happening just after the str instruction which would
* clear the Z flag although the exchange was done.
*/
teq ip, ip @ set Z flag
ldr ip, [r2] @ load current val
add r3, r2, #1 @ prepare store ptr
teqeq ip, r0 @ compare with oldval if still allowed
streq r1, [r3, #-1]! @ store newval if still allowed
subs r0, r2, r3 @ if r2 == r3 the str occured
mov pc, lr
#else
ldrex r3, [r2]
subs r3, r3, r0
strexeq r3, r1, [r2]
rsbs r0, r3, #0
mov pc, lr
#endif
.align 5
/*
* Reference prototype:
*
* int __kernel_get_tls(void)
*
* Input:
*
* lr = return address
*
* Output:
*
* r0 = TLS value
*
* Clobbered:
*
* the Z flag might be lost
*
* Definition and user space usage example:
*
* typedef int (__kernel_get_tls_t)(void);
* #define __kernel_get_tls (*(__kernel_get_tls_t *)0xffff0fe0)
*
* Get the TLS value as previously set via the __ARM_NR_set_tls syscall.
*
* This could be used as follows:
*
* #define __kernel_get_tls() \
* ({ register unsigned int __val asm("r0"); \
* asm( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #31" \
* : "=r" (__val) : : "lr","cc" ); \
* __val; })
*/
__kuser_get_tls: @ 0xffff0fe0
#ifndef CONFIG_HAS_TLS_REG
#ifdef CONFIG_SMP /* sanity check */
#error "CONFIG_SMP without CONFIG_HAS_TLS_REG is wrong"
#endif
ldr r0, [pc, #(16 - 8)] @ TLS stored at 0xffff0ff0
mov pc, lr
#else
mrc p15, 0, r0, c13, c0, 3 @ read TLS register
mov pc, lr
#endif
.rep 5
.word 0 @ pad up to __kuser_helper_version
.endr
/*
* Reference declaration:
*
* extern unsigned int __kernel_helper_version;
*
* Definition and user space usage example:
*
* #define __kernel_helper_version (*(unsigned int *)0xffff0ffc)
*
* User space may read this to determine the curent number of helpers
* available.
*/
__kuser_helper_version: @ 0xffff0ffc
.word ((__kuser_helper_end - __kuser_helper_start) >> 5)
.globl __kuser_helper_end
__kuser_helper_end:
/*
* Vector stubs.
*
* This code is copied to 0xffff0200 so we can use branches in the
* vectors, rather than ldr's. Note that this code must not
* exceed 0x300 bytes.
*
* Common stub entry macro:
* Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
*/
.macro vector_stub, name, sym, correction=0
.align 5
vector_\name:
ldr r13, .LCs\sym
.if \correction
sub lr, lr, #\correction
.endif
str lr, [r13] @ save lr_IRQ
mrs lr, spsr
str lr, [r13, #4] @ save spsr_IRQ
@
@ now branch to the relevant MODE handling routine
@
mrs r13, cpsr
bic r13, r13, #MODE_MASK
orr r13, r13, #SVC_MODE
msr spsr_cxsf, r13 @ switch to SVC_32 mode
and lr, lr, #15
ldr lr, [pc, lr, lsl #2]
movs pc, lr @ Changes mode and branches
.endm
.globl __stubs_start
__stubs_start:
/*
* Interrupt dispatcher
*/
vector_stub irq, irq, 4
.long __irq_usr @ 0 (USR_26 / USR_32)
.long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
.long __irq_invalid @ 2 (IRQ_26 / IRQ_32)
.long __irq_svc @ 3 (SVC_26 / SVC_32)
.long __irq_invalid @ 4
.long __irq_invalid @ 5
.long __irq_invalid @ 6
.long __irq_invalid @ 7
.long __irq_invalid @ 8
.long __irq_invalid @ 9
.long __irq_invalid @ a
.long __irq_invalid @ b
.long __irq_invalid @ c
.long __irq_invalid @ d
.long __irq_invalid @ e
.long __irq_invalid @ f
/*
* Data abort dispatcher
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
vector_stub dabt, abt, 8
.long __dabt_usr @ 0 (USR_26 / USR_32)
.long __dabt_invalid @ 1 (FIQ_26 / FIQ_32)
.long __dabt_invalid @ 2 (IRQ_26 / IRQ_32)
.long __dabt_svc @ 3 (SVC_26 / SVC_32)
.long __dabt_invalid @ 4
.long __dabt_invalid @ 5
.long __dabt_invalid @ 6
.long __dabt_invalid @ 7
.long __dabt_invalid @ 8
.long __dabt_invalid @ 9
.long __dabt_invalid @ a
.long __dabt_invalid @ b
.long __dabt_invalid @ c
.long __dabt_invalid @ d
.long __dabt_invalid @ e
.long __dabt_invalid @ f
/*
* Prefetch abort dispatcher
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
vector_stub pabt, abt, 4
.long __pabt_usr @ 0 (USR_26 / USR_32)
.long __pabt_invalid @ 1 (FIQ_26 / FIQ_32)
.long __pabt_invalid @ 2 (IRQ_26 / IRQ_32)
.long __pabt_svc @ 3 (SVC_26 / SVC_32)
.long __pabt_invalid @ 4
.long __pabt_invalid @ 5
.long __pabt_invalid @ 6
.long __pabt_invalid @ 7
.long __pabt_invalid @ 8
.long __pabt_invalid @ 9
.long __pabt_invalid @ a
.long __pabt_invalid @ b
.long __pabt_invalid @ c
.long __pabt_invalid @ d
.long __pabt_invalid @ e
.long __pabt_invalid @ f
/*
* Undef instr entry dispatcher
* Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
*/
vector_stub und, und
.long __und_usr @ 0 (USR_26 / USR_32)
.long __und_invalid @ 1 (FIQ_26 / FIQ_32)
.long __und_invalid @ 2 (IRQ_26 / IRQ_32)
.long __und_svc @ 3 (SVC_26 / SVC_32)
.long __und_invalid @ 4
.long __und_invalid @ 5
.long __und_invalid @ 6
.long __und_invalid @ 7
.long __und_invalid @ 8
.long __und_invalid @ 9
.long __und_invalid @ a
.long __und_invalid @ b
.long __und_invalid @ c
.long __und_invalid @ d
.long __und_invalid @ e
.long __und_invalid @ f
.align 5
/*=============================================================================
* Undefined FIQs
*-----------------------------------------------------------------------------
* Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC
* MUST PRESERVE SVC SPSR, but need to switch to SVC mode to show our msg.
* Basically to switch modes, we *HAVE* to clobber one register... brain
* damage alert! I don't think that we can execute any code in here in any
* other mode than FIQ... Ok you can switch to another mode, but you can't
* get out of that mode without clobbering one register.
*/
vector_fiq:
disable_fiq
subs pc, lr, #4
/*=============================================================================
* Address exception handler
*-----------------------------------------------------------------------------
* These aren't too critical.
* (they're not supposed to happen, and won't happen in 32-bit data mode).
*/
vector_addrexcptn:
b vector_addrexcptn
/*
* We group all the following data together to optimise
* for CPUs with separate I & D caches.
*/
.align 5
.LCvswi:
.word vector_swi
.LCsirq:
.word __temp_irq
.LCsund:
.word __temp_und
.LCsabt:
.word __temp_abt
.globl __stubs_end
__stubs_end:
.equ stubs_offset, __vectors_start + 0x200 - __stubs_start
.globl __vectors_start
__vectors_start:
swi SYS_ERROR0
b vector_und + stubs_offset
ldr pc, .LCvswi + stubs_offset
b vector_pabt + stubs_offset
b vector_dabt + stubs_offset
b vector_addrexcptn + stubs_offset
b vector_irq + stubs_offset
b vector_fiq + stubs_offset
.globl __vectors_end
__vectors_end:
.data
/*
* Do not reorder these, and do not insert extra data between...
*/
__temp_irq:
.word 0 @ saved lr_irq
.word 0 @ saved spsr_irq
.word -1 @ old_r0
__temp_und:
.word 0 @ Saved lr_und
.word 0 @ Saved spsr_und
.word -1 @ old_r0
__temp_abt:
.word 0 @ Saved lr_abt
.word 0 @ Saved spsr_abt
.word -1 @ old_r0
.globl cr_alignment
.globl cr_no_alignment
cr_alignment:
.space 4
cr_no_alignment:
.space 4
