/*
* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
* Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 (or later) as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "omap34xx-hs.dtsi"
/ {
model = "Nokia N900";
compatible = "nokia,omap3-n900", "ti,omap3";
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
gpio_keys {
compatible = "gpio-keys";
camera_lens_cover {
label = "Camera Lens Cover";
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
linux,input-type = <5>; /* EV_SW */
linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
gpio-key,wakeup;
};
camera_focus {
label = "Camera Focus";
gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
gpio-key,wakeup;
};
camera_capture {
label = "Camera Capture";
gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
linux,code = <0xd4>; /* KEY_CAMERA */
gpio-key,wakeup;
};
lock_button {
label = "Lock Button";
gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
linux,code = <0x98>; /* KEY_SCREENLOCK */
gpio-key,wakeup;
};
keypad_slide {
label = "Keypad Slide";
gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
linux,input-type = <5>; /* EV_SW */
linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
gpio-key,wakeup;
};
proximity_sensor {
label = "Proximity Sensor";
gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
linux,input-type = <5>; /* EV_SW */
linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
};
};
};
&omap3_pmx_core {
pinctrl-names = "default";
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx */
0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx */
0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x18a (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
0x18e (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
0x190 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
0x192 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
0x194 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
>;
};
display_pins: pinmux_display_pins {
pinctrl-single,pins = <
0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <2200000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
};
};
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
&vaux1 {
regulator-name = "V28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on; /* due battery cover sensor */
};
&vaux2 {
regulator-name = "VCSI";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&vaux3 {
regulator-name = "VMMC2_30";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
};
&vaux4 {
regulator-name = "VCAM_ANA_28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
&vmmc1 {
regulator-name = "VMMC1";
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
};
&vmmc2 {
regulator-name = "V28_A";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
regulator-always-on; /* due VIO leak to AIC34 VDDs */
};
&vpll1 {
regulator-name = "VPLL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
&vpll2 {
regulator-name = "VSDI_CSI";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
&vsim {
regulator-name = "VMMC2_IO_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&vio {
regulator-name = "VIO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&vintana1 {
regulator-name = "VINTANA1";
/* fixed to 1500000 */
regulator-always-on;
};
&vintana2 {
regulator-name = "VINTANA2";
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <2750000>;
regulator-always-on;
};
&vintdig {
regulator-name = "VINTDIG";
/* fixed to 1500000 */
regulator-always-on;
};
&twl {
twl_audio: audio {
compatible = "ti,twl4030-audio";
ti,enable-vibra = <1>;
};
};
&twl_gpio {
ti,pullups = <0x0>;
ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <100000>;
tlv320aic3x: tlv320aic3x@18 {
compatible = "ti,tlv320aic3x";
reg = <0x18>;
gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
ai3x-gpio-func = <
0 /* AIC3X_GPIO1_FUNC_DISABLED */
5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
>;
AVDD-supply = <&vmmc2>;
DRVDD-supply = <&vmmc2>;
IOVDD-supply = <&vio>;
DVDD-supply = <&vio>;
};
tlv320aic3x_aux: tlv320aic3x@19 {
compatible = "ti,tlv320aic3x";
reg = <0x19>;
gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
AVDD-supply = <&vmmc2>;
DRVDD-supply = <&vmmc2>;
IOVDD-supply = <&vio>;
DVDD-supply = <&vio>;
};
lp5523: lp5523@32 {
compatible = "national,lp5523";
reg = <0x32>;
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
chan0 {
chan-name = "lp5523:kb1";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
};
chan1 {
chan-name = "lp5523:kb2";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
};
chan2 {
chan-name = "lp5523:kb3";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
};
chan3 {
chan-name = "lp5523:kb4";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
};
chan4 {
chan-name = "lp5523:b";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
};
chan5 {
chan-name = "lp5523:g";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
};
chan6 {
chan-name = "lp5523:r";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
};
chan7 {
chan-name = "lp5523:kb5";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
};
chan8 {
chan-name = "lp5523:kb6";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
};
};
bq27200: bq27200@55 {
compatible = "ti,bq27200";
reg = <0x55>;
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};
/* most boards use vaux3, only some old versions use vmmc2 instead */
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&vaux3>;
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
non-removable;
};
&mmc3 {
status = "disabled";
};
&gpmc {
ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
/* gpio-irq for dma: 65 */
onenand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0 0x10000000>;
gpmc,sync-read;
gpmc,sync-write;
gpmc,burst-length = <16>;
gpmc,burst-read;
gpmc,burst-wrap;
gpmc,burst-write;
gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <87>;
gpmc,cs-wr-off-ns = <87>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <10>;
gpmc,adv-wr-off-ns = <10>;
gpmc,oe-on-ns = <15>;
gpmc,oe-off-ns = <87>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <87>;
gpmc,rd-cycle-ns = <112>;
gpmc,wr-cycle-ns = <112>;
gpmc,access-ns = <81>;
gpmc,page-burst-access-ns = <15>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,clk-activation-ns = <5>;
gpmc,wr-data-mux-bus-ns = <30>;
gpmc,wr-access-ns = <81>;
gpmc,sync-clk-ps = <15000>;
/*
* MTD partition table corresponding to Nokia's
* Maemo 5 (Fremantle) release.
*/
partition@0 {
label = "bootloader";
reg = <0x00000000 0x00020000>;
read-only;
};
partition@1 {
label = "config";
reg = <0x00020000 0x00060000>;
};
partition@2 {
label = "log";
reg = <0x00080000 0x00040000>;
};
partition@3 {
label = "kernel";
reg = <0x000c0000 0x00200000>;
};
partition@4 {
label = "initfs";
reg = <0x002c0000 0x00200000>;
};
partition@5 {
label = "rootfs";
reg = <0x004c0000 0x0fb40000>;
};
};
};
&mcspi1 {
/*
* For some reason, touchscreen is necessary for screen to work at
* all on real hw. It works well without it on emulator.
*
* Also... order in the device tree actually matters here.
*/
tsc2005@0 {
compatible = "tsc2005";
spi-max-frequency = <6000000>;
reg = <0>;
};
mipid@2 {
compatible = "acx565akm";
spi-max-frequency = <6000000>;
reg = <2>;
pinctrl-names = "default";
pinctrl-0 = <&display_pins>;
};
};
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
phys = <&usb2_phy>;
phy-names = "usb2-phy";
mode = <2>;
power = <50>;
};
&uart1 {
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
