blob: e88b2a6be079d855a985ca8bb18677895f7a7494 (
plain) (
tree)
|
|
/*
* Copyright 2012 Armadeus Systems - <support@armadeus.com>
* Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
*
* Based on mx51-babbage.dts
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx51.dtsi"
/ {
model = "Armadeus Systems APF51 module";
compatible = "armadeus,imx51-apf51", "fsl,imx51";
memory {
reg = <0x90000000 0x20000000>;
};
clocks {
osc {
clock-frequency = <33554432>;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "mii";
phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
phy-reset-duration = <1>;
status = "okay";
};
&iomuxc {
imx51-apf51 {
pinctrl_fec: fecgrp {
fsl,pins = <
MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000
MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000
MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000
MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000
MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000
MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000
MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000
MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000
MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000
MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000
MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000
MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000
MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000
MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000
MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000
MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000
MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
>;
};
};
};
&nfc {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
|
