/*
* Device Tree file for Marvell Armada 370 evaluation board
* (DB-88F6710-BP-DDR3)
*
* Copyright (C) 2012 Marvell
*
* Lior Amsalem <alior@marvell.com>
* Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/dts-v1/;
#include "armada-370.dtsi"
/ {
model = "Marvell Armada 370 Evaluation Board";
compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>; /* 1 GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
internal-regs {
serial@12000 {
status = "okay";
};
sata@a0000 {
nr-ports = <2>;
status = "okay";
};
mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
};
ethernet@70000 {
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
i2c@11000 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
clock-frequency = <100000>;
status = "okay";
audio_codec: audio-codec@4a {
compatible = "cirrus,cs42l51";
reg = <0x4a>;
};
};
audio-controller@30000 {
pinctrl-0 = <&i2s_pins2>;
pinctrl-names = "default";
status = "okay";
};
mvsdio@d4000 {
pinctrl-0 = <&sdio_pins1>;
pinctrl-names = "default";
/*
* This device is disabled by default, because
* using the SD card connector requires
* changing the default CON40 connector
* "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
* different connector
* "DB-88F6710_MPP_RGMII_SD_Jumper".
*/
status = "disabled";
/* No CD or WP GPIOs */
broken-cd;
};
pinctrl {
/*
* These pins might be muxed as I2S by
* the bootloader, but it conflicts
* with the real I2S pins that are
* muxed using i2s_pins. We must mux
* those pins to a function other than
* I2S.
*/
pinctrl-0 = <&hog_pins1 &hog_pins2>;
pinctrl-names = "default";
hog_pins1: hog-pins1 {
marvell,pins = "mpp6", "mpp8", "mpp10",
"mpp12", "mpp13";
marvell,function = "gpio";
};
hog_pins2: hog-pins2 {
marvell,pins = "mpp5", "mpp7", "mpp9";
marvell,function = "gpo";
};
};
usb@50000 {
status = "okay";
};
usb@51000 {
status = "okay";
};
spi0: spi@10600 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l25635e";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
};
};
};
pcie-controller {
status = "okay";
/*
* The two PCIe units are accessible through
* both standard PCIe slots and mini-PCIe
* slots on the board.
*/
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
};
sound {
compatible = "marvell,a370db-audio";
marvell,audio-controller = <&audio_controller>;
marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
status = "okay";
};
spdif_out: spdif-out {
compatible = "linux,spdif-dit";
};
spdif_in: spdif-in {
compatible = "linux,spdif-dir";
};
};