/*
* arch/alpha/lib/strncpy_from_user.S
* Contributed by Richard Henderson (rth@tamu.edu)
*
* Just like strncpy except in the return value:
*
* -EFAULT if an exception occurs before the terminator is copied.
* N if the buffer filled.
*
* Otherwise the length of the string is returned.
*/
#include <asm/errno.h>
#include <asm/regdef.h>
/* Allow an exception for an insn; exit if we get one. */
#define EX(x,y...) \
99: x,##y; \
.section __ex_table,"a"; \
.long 99b - .; \
lda $31, $exception-99b($0); \
.previous
.set noat
.set noreorder
.text
.globl __strncpy_from_user
.ent __strncpy_from_user
.frame $30, 0, $26
.prologue 0
.align 3
$aligned:
/* On entry to this basic block:
t0 == the first destination word for masking back in
t1 == the first source word. */
/* Create the 1st output word and detect 0's in the 1st input word. */
lda t2, -1 # e1 : build a mask against false zero
mskqh t2, a1, t2 # e0 : detection in the src word
mskqh t1, a1, t3 # e0 :
ornot t1, t2, t2 # .. e1 :
mskql t0, a1, t0 # e0 : assemble the first output word
cmpbge zero, t2, t8 # .. e1 : bits set iff null found
or t0, t3, t0 # e0 :
beq a2, $a_eoc # .. e1 :
bne t8, $a_eos # .. e1 :
/* On entry to this basic block:
t0 == a source word not containing a null. */
$a_loop:
stq_u t0, 0(a0) # e0 :
addq a0, 8, a0 # .. e1 :
EX( ldq_u t0, 0(a1) ) # e0 :
addq a1, 8, a1 # .. e1 :
subq a2, 1, a2 # e0 :
cmpbge zero, t0, t8 # .. e1 (stall)
beq a2, $a_eoc # e1 :
beq t8, $a_loop # e1 :
/* Take care of the final (partial) word store. At this point
the end-of-count bit is set in t8 iff it applies.
On entry to this basic block we have:
t0 == the source word containing the null
t8 == the cmpbge mask that found it. */
$a_eos:
negq t8, t12 # e0 : find low bit set
and t8, t12, t12 # e1 (stall)
/* For the sake of the cache, don't read a destination word
if we're not going to need it. */
and t12, 0x80, t6 # e0 :
bne t6, 1f # .. e1 (zdb)
/* We're doing a partial word store and so need to combine
our source and original destination words. */
ldq_u t1, 0(a0) # e0 :
subq t12, 1, t6 # .. e1 :
or t12, t6, t8 # e0 :
unop #
zapnot t0, t8, t0 # e0 : clear src bytes > null
zap t1, t8, t1 # .. e1 : clear dst bytes <= null
or t0, t1, t0 # e1 :
1: stq_u t0, 0(a0)
br $finish_up
/* Add the end-of-count bit to the eos detection bitmask. */
$a_eoc:
or t10, t8, t8
br $a_eos
/*** The Function Entry Point ***/
.align 3
__strncpy_from_user:
mov a0, v0 # save the string start
beq a2, $zerolength
/* Are source and destination co-aligned? */
xor a0, a1, t1 # e0 :
and a0, 7, t0 # .. e1 : find dest misalignment
and t1, 7, t1 # e0 :
addq a2, t0, a2 # .. e1 : bias count by dest misalignment
subq a2, 1, a2 # e0 :
and a2, 7, t2 # e1 :
srl a2, 3, a2 # e0 : a2 = loop counter = (count - 1)/8
addq zero, 1, t10 # .. e1 :
sll t10, t2, t10 # e0 : t10 = bitmask of last count byte
bne t1, $unaligned # .. e1 :
/* We are co-aligned; take care of a partial first word. */
EX( ldq_u t1, 0(a1) ) # e0 : load first src word
addq a1, 8, a1 # .. e1 :
beq t0, $aligned # avoid loading dest word if not needed
ldq_u t0, 0(a0) # e0 :
br $aligned # .. e1 :
/* The source and destination are not co-aligned. Align the destination
and cope. We have to be very careful about not reading too much and
causing a SEGV. */
.align 3
$u_head:
/* We know just enough now to be able to assemble the first
full source word. We can still find a zero at the end of it
that prevents us from outputting the whole thing.
On entry to this basic block:
t0 == the first dest word, unmasked
t1 == the shifted low bits of the first source word
t6 == bytemask that is -1 in dest word bytes */
EX( ldq_u t2, 8(a1) ) # e0 : load second src word
addq a1, 8, a1 # .. e1 :
mskql t0, a0, t0 # e0 : mask trailing garbage in dst
extqh t2, a1, t4 # e0 :
or t1, t4, t1 # e1 : first aligned src word complete
mskqh t1, a0, t1 # e0 : mask leading garbage in src
or t0, t1, t0 # e0 : first output word complete
or t0, t6, t6 # e1 : mask original data for zero test
cmpbge zero, t6, t8 # e0 :
beq a2, $u_eocfin # .. e1 :
bne t8, $u_final # e1 :
lda t6, -1 # e1 : mask out the bits we have
mskql t6, a1, t6 # e0 : already seen
stq_u t0, 0(a0) # e0 : store first output word
or t6, t2, t2 # .. e1 :
cmpbge zero, t2, t8 # e0 : find nulls in second partial
addq a0, 8, a0 # .. e1 :
subq a2, 1, a2 # e0 :
bne t8, $u_late_head_exit # .. e1 :
/* Finally, we've got all the stupid leading edge cases taken care
of and we can set up to enter the main loop. */
extql t2, a1, t1 # e0 : position hi-bits of lo word
EX( ldq_u t2, 8(a1) ) # .. e1 : read next high-order source word
addq a1, 8, a1 # e0 :
cmpbge zero, t2, t8 # e1 (stall)
beq a2, $u_eoc # e1 :
bne t8, $u_eos # e1 :
/* Unaligned copy main loop. In order to avoid reading too much,
the loop is structured to detect zeros in aligned source words.
This has, unfortunately, effectively pulled half of a loop
iteration out into the head and half into the tail, but it does
prevent nastiness from accumulating in the very thing we want
to run as fast as possible.
On entry to this basic block:
t1 == the shifted high-order bits from the previous source word
t2 == the unshifted current source word
We further know that t2 does not contain a null terminator. */
.align 3
$u_loop:
extqh t2, a1, t0 # e0 : extract high bits for current word
addq a1, 8, a1 # .. e1 :
extql t2, a1, t3 # e0 : extract low bits for next time
addq a0, 8, a0 # .. e1 :
or t0, t1, t0 # e0 : current dst word now complete
EX( ldq_u t2, 0(a1) ) # .. e1 : load high word for next time
stq_u t0, -8(a0) # e0 : save the current word
mov t3, t1 # .. e1 :
subq a2, 1, a2 # e0 :
cmpbge zero, t2, t8 # .. e1 : test new word for eos
beq a2, $u_eoc # e1 :
beq t8, $u_loop # e1 :
/* We've found a zero somewhere in the source word we just read.
If it resides in the lower half, we have one (probably partial)
word to write out, and if it resides in the upper half, we
have one full and one partial word left to write out.
On entry to this basic block:
t1 == the shifted high-order bits from the previous source word
t2 == the unshifted current source word. */
$u_eos:
extqh t2, a1, t0 # e0 :
or t0, t1, t0 # e1 : first (partial) source word complete
cmpbge zero, t0, t8 # e0 : is the null in this first bit?
bne t8, $u_final # .. e1 (zdb)
stq_u t0, 0(a0) # e0 : the null was in the high-order bits
addq a0, 8, a0 # .. e1 :
subq a2, 1, a2 # e1 :
$u_late_head_exit:
extql t2, a1, t0 # .. e0 :
cmpbge zero, t0, t8 # e0 :
or t8, t10, t6 # e1 :
cmoveq a2, t6, t8 # e0 :
nop # .. e1 :
/* Take care of a final (probably partial) result word.
On entry to this basic block:
t0 == assembled source word
t8 == cmpbge mask that found the null. */
$u_final:
negq t8, t6 # e0 : isolate low bit set
and t6, t8, t12 # e1 :
and t12, 0x80, t6 # e0 : avoid dest word load if we can
bne t6, 1f # .. e1 (zdb)
ldq_u t1, 0(a0) # e0 :
subq t12, 1, t6 # .. e1 :
or t6, t12, t8 # e0 :
zapnot t0, t8, t0 # .. e1 : kill source bytes > null
zap t1, t8, t1 # e0 : kill dest bytes <= null
or t0, t1, t0 # e1 :
1: stq_u t0, 0(a0) # e0 :
br $finish_up
$u_eoc: # end-of-count
extqh t2, a1, t0
or t0, t1, t0
cmpbge zero, t0, t8
$u_eocfin: # end-of-count, final word
or t10, t8, t8
br $u_final
/* Unaligned copy entry point. */
.align 3
$unaligned:
EX( ldq_u t1, 0(a1) ) # e0 : load first source word
and a0, 7, t4 # .. e1 : find dest misalignment
and a1, 7, t5 # e0 : find src misalignment
/* Conditionally load the first destination word and a bytemask
with 0xff indicating that the destination byte is sacrosanct. */
mov zero, t0 # .. e1 :
mov zero, t6 # e0 :
beq t4, 1f # .. e1 :
ldq_u t0, 0(a0) # e0 :
lda t6, -1 # .. e1 :
mskql t6, a0, t6 # e0 :
1:
subq a1, t4, a1 # .. e1 : sub dest misalignment from src addr
/* If source misalignment is larger than dest misalignment, we need
extra startup checks to avoid SEGV. */
cmplt t4, t5, t12 # e1 :
extql t1, a1, t1 # .. e0 : shift src into place
lda t2, -1 # e0 : for creating masks later
beq t12, $u_head # e1 :
mskqh t2, t5, t2 # e0 : begin src byte validity mask
cmpbge zero, t1, t8 # .. e1 : is there a zero?
extql t2, a1, t2 # e0 :
or t8, t10, t5 # .. e1 : test for end-of-count too
cmpbge zero, t2, t3 # e0 :
cmoveq a2, t5, t8 # .. e1 :
andnot t8, t3, t8 # e0 :
beq t8, $u_head # .. e1 (zdb)
/* At this point we've found a zero in the first partial word of
the source. We need to isolate the valid source data and mask
it into the original destination data. (Incidentally, we know
that we'll need at least one byte of that original dest word.) */
ldq_u t0, 0(a0) # e0 :
negq t8, t6 # .. e1 : build bitmask of bytes <= zero
mskqh t1, t4, t1 # e0 :
and t6, t8, t12 # .. e1 :
subq t12, 1, t6 # e0 :
or t6, t12, t8 # e1 :
zapnot t2, t8, t2 # e0 : prepare source word; mirror changes
zapnot t1, t8, t1 # .. e1 : to source validity mask
andnot t0, t2, t0 # e0 : zero place for source to reside
or t0, t1, t0 # e1 : and put it there
stq_u t0, 0(a0) # e0 :
$finish_up:
zapnot t0, t12, t4 # was last byte written null?
cmovne t4, 1, t4
and t12, 0xf0, t3 # binary search for the address of the
and t12, 0xcc, t2 # last byte written
and t12, 0xaa, t1
bic a0, 7, t0
cmovne t3, 4, t3
cmovne t2, 2, t2
cmovne t1, 1, t1
addq t0, t3, t0
addq t1, t2, t1
addq t0, t1, t0
addq t0, t4, t0 # add one if we filled the buffer
subq t0, v0, v0 # find string length
ret
$zerolength:
clr v0
$exception:
ret
.end __strncpy_from_user
