path: root/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/i2c.txt

* I2C

The I2C controller is expressed as a bus under the CPM node.

Properties:
- compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c"
- reg : On CPM2 devices, the second resource doesn't specify the I2C
  Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM
  (typically 0x8afc 0x2).
- #address-cells : Should be one. The cell is the i2c device address with
  the r/w bit set to zero.
- #size-cells : Should be zero.
- clock-frequency : Can be used to set the i2c clock frequency. If
  unspecified, a default frequency of 60kHz is being used.
The following two properties are deprecated. They are only used by legacy
i2c drivers to find the bus to probe:
- linux,i2c-index : Can be used to hard code an i2c bus number. By default,
  the bus number is dynamically assigned by the i2c core.
- linux,i2c-class : Can be used to override the i2c class. The class is used
  by legacy i2c device drivers to find a bus in a specific context like
  system management, video or sound. By default, I2C_CLASS_HWMON (1) is
  being used. The definition of the classes can be found in
  include/i2c/i2c.h

Example, based on mpc823:

	i2c@860 {
		compatible = "fsl,mpc823-i2c",
			     "fsl,cpm1-i2c";
		reg = <0x860 0x20 0x3c80 0x30>;
		interrupts = <16>;
		interrupt-parent = <&CPM_PIC>;
		fsl,cpm-command = <0x10>;
		#address-cells = <1>;
		#size-cells = <0>;

		rtc@68 {
			compatible = "dallas,ds1307";
			reg = <0x68>;
		};
	};