path: root/Documentation/devicetree/bindings/gpio/gpio-fan.txt

Bindings for fan connected to GPIO lines

Required properties:
- compatible : "gpio-fan"
- gpios: Specifies the pins that map to bits in the control value,
  ordered MSB-->LSB.
- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
  control value that should be set to achieve them. This array
  must have the RPM values in ascending order.

Optional properties:
- alarm-gpios: This pin going active indicates something is wrong with
  the fan, and a udev event will be fired.

Examples:

	gpio_fan {
		compatible = "gpio-fan";
		gpios = <&gpio1 14 1
			 &gpio1 13 1>;
		gpio-fan,speed-map = <0    0
				      3000 1
				      6000 2>;
		alarm-gpios = <&gpio1 15 1>;
	};