aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* iwmc3200wifi: New initial LMAC calibrationSamuel Ortiz2009-09-01
| | | | | | | | | | | The LMAC calibration API got broken mostly by having a configuration bitmap being different than the result one. This patch tries to address that issue by correctly running calibrations with the newest firmwares, and keeping a backward compatibility fallback path for older firmwares, where the configuration and result bitmaps were identical. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwmc3200wifi: fix misuse of le16_to_cpuZhu Yi2009-09-01
| | | | | | | | Also mark some functions static. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwmc3200wifi: add disconnect workZhu Yi2009-09-01
| | | | | | | | | | | | | | | When the driver receives "connection terminated" event from device, it could be caused by 2 reasons: the firmware is roaming or the connection is lost (AP disappears). For the former, an association complete event is supposed to come within 3 seconds. For the latter, the driver won't receive any event except the connection terminated. So we kick a delayed work (5*HZ) when we receive the connection terminated event. It will be canceled if it turns out to be a roaming event later. Otherwise we notify SME and userspace the disconnection. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwmc3200wifi: use cfg80211_roamed to send roam eventZhu Yi2009-09-01
| | | | | | | | | | | The device sends connection terminated and [re]association success (or failure) events when roaming occours. The patch uses cfg80211_roamed instead of cfg80211_connect_result to notify SME for roaming. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwmc3200wifi: Fix sparse warningSamuel Ortiz2009-09-01
| | | | | | | iwm_cfg80211_get_station() should be static. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwmc3200wifi: Set WEP key from connectSamuel Ortiz2009-09-01
| | | | | | | | | When connect is called with the LEGACY_PSK authentication type set, and a proper sme->key, we need to set the WEP key straight after setting the profile otherwise the authentication will never start. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwmc3200wifi: invalidate profile when necessary before connectZhu Yi2009-09-01
| | | | | | | | | | If cfg80211 requests to connect when we have already had an active profile, invalidate the current profile first before sending a new profile to UMAC. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rndis_wlan: remove 'select WIRELESS_EXT' in KconfigJussi Kivilinna2009-09-01
| | | | | | | | Since rndis_wlan is now converted to cfg80211, WIRELESS_EXT isn't required anymore. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rndis_wlan: fix sparse endianess warningsJussi Kivilinna2009-09-01
| | | | | Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rndis_wlan: cleanupJussi Kivilinna2009-09-01
| | | | | | | | | | - remove double newlines between functions - remove commented out function (rndis_set_config_parameter_u32()) - coding style fix in rndis_set_config_parameter_str() - add comment banners between function sections Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rndis_wlan: use bool for on/off switchesJussi Kivilinna2009-09-01
| | | | | Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Call spin_lock_bh() on btcoex_lockVasanthakumar Thiagarajan2009-09-01
| | | | | | | | As generic hw timer interrupt handler is moved to tasklet, we no more need to call spin_lock_irqsave(). Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Move generic hw timer intr handler to bottom-halfVasanthakumar Thiagarajan2009-09-01
| | | | | | | | There is no point handling this in hard irq, move it to tasklet. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Do an AHB reset before doing RTC resetVasanthakumar Thiagarajan2009-08-31
| | | | | | | | | Doing an RTC reset when DMA is active may corrupt memory, make sure no DMA is active at this moment by doing an AHB reset. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ipw2200: fix kconfig dependenciesRandy Dunlap2009-08-31
| | | | | | | | | | | | | Fix kconfig dependencies for ipw2x00 drivers, fixes build errors: ERROR: "wiphy_free" [drivers/net/wireless/ipw2x00/libipw.ko] undefined! ERROR: "wiphy_unregister" [drivers/net/wireless/ipw2x00/libipw.ko] undefined! ERROR: "wiphy_new" [drivers/net/wireless/ipw2x00/libipw.ko] undefined! ERROR: "cfg80211_wext_giwname" [drivers/net/wireless/ipw2x00/ipw2200.ko] undefined! ERROR: "wiphy_register" [drivers/net/wireless/ipw2x00/ipw2200.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Reorganize padding & L2 paddingIvo van Doorn2009-08-31
| | | | | | | | | | | | | | | | | | | | | | | The old function rt2x00queue_payload_align() handled both adding and removing L2 padding and some basic frame alignment. The entire function was being abused because it had multiple functions and the header length argument was somtimes used to align the header instead of the payload. Additionally there was a bug when inserting L2 padding that only the payload was aligned but not the header. This happens when the header wasn't aligned properly by mac80211, but rt2x00lib only moves the payload. A secondary problem was that when removing L2 padding during TXdone or RX the skb wasn't resized to the proper size. Split the function into seperate functions each handling its task as it should. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix TX status reportingIvo van Doorn2009-08-31
| | | | | | | | | | Not all values of the TX status enumeration were covered during updating of the TX statistics. This could lead to wrong bitrate tuning but also wrong behavior in tools like hostapd. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: LP-PHY: Fix TX gain tablesGábor Stefanik2009-08-31
| | | | | | | | | The rev1 2GHz and rev2 5GHz gain tables were incorrectly documented on the specs originally. Update these gaintables to match the cor- rected specs. Signed-off-by: Gábor Stefanik <netroller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: Fix typo in modparam_btcoex descriptionGábor Stefanik2009-08-31
| | | | | Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: Add myself to module authors & to LP-PHY file copyright noticesGábor Stefanik2009-08-31
| | | | | | | | Also mark the LP-PHY driver "802.11a/g" instead of "802.11g", as LP-PHY is capable of both 2GHz and 5GHz operation. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: Refactor and update antenna diversity for A/G-PHYGábor Stefanik2009-08-31
| | | | | | | | | -Make use of the b43_phy_set/mask/maskset helpers. -Fix a few errors in the code. -Make the code more readable. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: reduce debug noise when default debug flags usedReinette Chatre2009-08-31
| | | | | | | | | | | | Significant literature suggests users use debug flags 0x43fff - this causes the debug flags to be set that causes information to be printed for every received frame - including beacons. In the best case it fills up the logs, at worst it slows driver down and causes failures due to timeouts. In the RX handler, print debugging only if user requested RX debugging. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: fix situation in which debug message is printedReinette Chatre2009-08-31
| | | | | | | | | 3945 does not have update_chain_flags defined and because if this we always see the debug message that does not apply to it. Add a check to be specific about what is actually happening. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: use sleep interval successionJohannes Berg2009-08-31
| | | | | | | | | | | | | | | | | | | | | | Some concerns were raised about the automatic adjustment of sleep intervals to all the same, potentially high, value, and I can imagine the hardware behaving better when we don't ask too much of it. So let's convert to use a succession of sleep levels when requesting to go to deeper sleeps (which can only happen with large DTIM intervals), using the succession values from power level three, which have the benefit of also having been tested extensively already. As a result, the automatic sleep level adjustment will now be mostly equivalent to power level three, except for the RX/TX timeouts and possibly using smaller sleep vectors to account for networking latency. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: use iwl_hwrate_get_mac80211_idx where appropriateDaniel C Halperin2009-08-31
| | | | | | | | | | | | | | | | For HT packets, mac80211 expects the rate_idx to be an MCS number, which is the lower byte of rate_n_flags. However, iwl_hwrate_to_plcp_idx takes the MCS number and reduces it down to the range 0-8 (6 to 60 Mbps), removing the bits that signify multiply streams, HT40 Duplicate mode, or unequal modulation. This version is used for various internal purposes through the driver. Add the function iwl_hwrate_get_mac80211_idx, an alternate version which takes the rate and the band and returns the mac80211 index (MCS, for HT packets, and PLCP rate, for legacy packets). Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: remove incorrect uses of ieee80211_get_tx_rate to prevent TX stallDaniel C Halperin2009-08-31
| | | | | | | | | | | | | | | | | | | | | Refactor and correct rate selection for outgoing transmitted packets. First, note that HT rates in the mac80211 rate table do not provide valid indices when ieee80211_get_tx_rate is called; the check to see if we could to abort a transmission early in iwl_tx_skb() would thus occasionally read invalid memory and occasionally stall transmission (if the erroneous byte was 0xff). We remove that code; the check wasn't valid anyway. Second, iwl_tx_cmd_build_rate() also called ieee80211_get_tx_rate to be used for sending management packets, which do not use the uCode station table. This patch refactors that function and adds comments to enhance legibility, replaces the call to ieee80211_get_tx_rate() with a direct lookup, and adds error handling in case the table entry is invalid. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: remove 60 Mbps from sband bitrates tableDaniel C Halperin2009-08-31
| | | | | | | | | | | | ieee80211_supported_band is supposed to only contain legacy rates in the bitrates table (HT rates go in the ieee80211_sta_ht_cap substruct). Make iwlwifi driver obey this restriction by removing the 60 Mbps rate. Also, clean up a few pieces of other code that formerly relied on 60 Mbps being in sband->bitrates. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* s2io: Generate complete messages using single line DBG_PRINTsJoe Perches2009-08-31
| | | | | | | | | | | | | | | | | | | | | Single line log messages should be emitted by a single call where possible. Converted multiple calls to DBG_PRINT to single call form. Removed "s2io:" preface from DBG_PRINTs. The DBG_PRINT macro now emits a log level and is surrounded by a do {...} while (0) All s2io log output is now prefaced with KBUILD_MODNAME ": " via pr_fmt. The DBG_PRINT macro should probably be converted to use the dev_<level> form eventually. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io.c: Convert skipped nic->config.tx_cfg[i]. to tx_cfg->Joe Perches2009-08-31
| | | | | | | | Missed doing the conversion in earlier patch. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io.c: Standardize statistics accessorsJoe Perches2009-08-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Regularize the declaration and uses of struct config_param *config = &sp->config; struct mac_info *mac_control = &sp->mac_control; and use struct stat_block *stats = mac_control->stats_info; struct swStat *swstats = &stats->sw_stat; struct xpakStat *xstats = &stats->xpak_stat; and convert the longish uses like nic->mac_control.stats_info->sw_stat.<foo> to swstats-><foo> etc. This also makes the statistics code marginally smaller and presumably faster. Old: $ size s2io.o text data bss dec hex filename 114289 516 33360 148165 242c5 s2io.o New: $ size s2io.o text data bss dec hex filename 114097 516 33360 147973 24205 s2io.o Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io.c: fix spelling explainationJoe Perches2009-08-31
| | | | | | Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io.c: convert printks to pr_<level>Joe Perches2009-08-31
| | | | | | | | Fixed trivial typo as well Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io.c: Make more conforming to normal kernel styleJoe Perches2009-08-31
| | | | | | | | | | | | | Still has a few long lines. checkpatch was: total: 263 errors, 53 warnings, 8751 lines checked is: total: 4 errors, 35 warnings, 8767 lines checked Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io.c: use kzallocJoe Perches2009-08-31
| | | | | | Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io.c: Use calculated size in kmallocsJoe Perches2009-08-31
| | | | | | | | Use consistent style. Don't calculate the kmalloc size multiple times Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io.c: Shorten code line length by using intermediate pointersJoe Perches2009-08-31
| | | | | | | | | | | | | | Repeated variable use and line wrapping is hard to read. Use temp variables instead of direct references. struct fifo_info *fifo = &mac_control->fifos[i]; struct ring_info *ring = &mac_control->rings[i]; struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io.c: Use const for stringsJoe Perches2009-08-31
| | | | | | Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* WAN: bit and/or confusionroel kluin2009-08-31
| | | | | | | Fix the tests that check whether Frame* bits are not set Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ucc_geth: Implement suspend/resume and Wake-On-LAN supportAnton Vorontsov2009-08-31
| | | | | | | | | | | | | | | This patch implements suspend/resume and WOL support for UCC Ethernet driver. We support two wake up events: wake on PHY/link changes and wake on magic packet. In some CPUs (like MPC8569) QE shuts down during sleep, so magic packet detection is unusable, and also on resume we should fully reinitialize UCC structures. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ucc_geth: Remove UGETH_MAGIC_PACKET Kconfig symbol and codeAnton Vorontsov2009-08-31
| | | | | | | | | | | This patch removes currently unused UGETH_MAGIC_PACKET Kconfig symbol and code, i.e. magic_packet_detection_{enable,disable} functions. The two functions each contain just two steps that we'll place into suspend/resume code path under CONFIG_PM. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ucc_geth: Factor out MAC initialization steps into a callAnton Vorontsov2009-08-31
| | | | | | | | This patch factors out MAC initialization into ucc_geth_init_mac() function that we'll use for suspend/resume. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ucc_geth: Fix NULL pointer dereference in uec_get_ethtool_stats()Anton Vorontsov2009-08-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 3e73fc9a12679a546284d597c1f19165792d0b83 ("ucc_geth: Fix IO memory (un)mapping code") I fixed ug_regs IO memory leak by properly freeing the allocated memory. But ethtool_stats() callback doesn't check for ug_regs being NULL, and that causes following oops if 'ethtool -S' is executed on a closed eth device: Unable to handle kernel paging request for data at address 0x00000180 Faulting instruction address: 0xc0208228 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0208228] uec_get_ethtool_stats+0x38/0x140 LR [c02559a0] ethtool_get_stats+0xf8/0x23c Call Trace: [ef87bcd0] [c025597c] ethtool_get_stats+0xd4/0x23c (unreliable) [ef87bd00] [c025706c] dev_ethtool+0xfe8/0x11bc [ef87be00] [c0252b5c] dev_ioctl+0x454/0x6a8 ... ---[ end trace 77fff1162a9586b0 ]--- Segmentation fault This patch fixes the issue. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-08-31
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6
| * Bluetooth: Add USB autosuspend support to btusb driverOliver Neukum2009-08-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support of USB autosuspend to the btusb driver. If the device doesn't support remote wakeup, simple support based on up/down is provided. If the device supports remote wakeup, additional support for autosuspend while the interface is up is provided. This is done by queueing URBs in an anchor structure and waking the device up from a work queue on sending. Reception triggers remote wakeup. The last busy facility of the USB autosuspend code is used. To close a race between autosuspend and transmission, a counter of ongoing transmissions is maintained. Add #ifdefs for CONFIG_PM as necessary. Signed-off-by: Oliver Neukum <oliver@neukum.org> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: Fix false errors from bcsp_pkt_cull functionWending Weng2009-08-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error message "Removed only %u out of %u pkts" is printed when multiple to be acked packets are queued. if (i++ >= pkts_to_be_removed) break; This will break out of the loop and increase the counter i when i==pkts_to_be_removed and the loop ends up with i=pkts_to_be_removed+1. The following line if (i != pkts_to_be_removed) { BT_ERR("Removed only %u out of %u pkts", i, pkts_to_be_removed); } will then display the false message. The counter i must not increase on the same statement. Signed-off-by: Wending Weng <wweng@rheinmetall.ca> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: Add missing kmalloc NULL tests to Marvell driverJulia Lawall2009-08-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check that the result of kmalloc is not NULL before dereferencing it. The patch also replaces kmalloc + memset by kzalloc. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: Fix incorrect alignment in Marvell BT-over-SDIO driverBing Zhao2009-08-22
| | | | | | | | | | | | | | | | | | The driver uses "u32" for alignment check and calculation which works only on 32-bit system. It will crash the 64-bit system. Replace "u32" with "unsigned long" to fix this issue. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: Remove Enter/Leave debug statements from Marvell driverMarcel Holtmann2009-08-22
| | | | | | | | | | | | | | | | | | The Marvell Bluetooth driver is full of Enter/Leave debug statements and all of them are really pointless and only clutter the code. Seems to be some left-overs when they ported the driver from Windows. For the Linux driver lets remove these. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: Fix last few compiler warning within Marvell core driverMarcel Holtmann2009-08-22
| | | | | | | | | | | | | | After fixing the driver to use skb_put properly for their HCI commands only a few compiler warnings are left. Add proper casting for them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: Fix Marvell driver to use skb_put and hci_opcode_packMarcel Holtmann2009-08-22
| | | | | | | | | | | | | | | | The Marvell driver has some weird quirks on how to construct proper SKBs with Bluetooth HCI commands. Fix it to use skb_put properly and also use hci_opcode_pack instead of self-crafted macro. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-19 02:26:57 -0400