aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/isci
Commit message (Collapse)AuthorAge
* [SCSI] isci: overriding max_concurr_spinup oem parameter by max(oem, user)Andrzej Jakowski2011-10-31
| | | | | | | | | | | | Fixes bug where max_concurr_spinup oem parameter should be overriden by max_concurr_spinup user parameter. Override should happen only when max_concurr_spinup user parameter is specified in command line (greater than 0). Also this fix shortens variables representing max_conxurr_spinup for oem and user parameters. Signed-off-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: revert bcn filteringDan Williams2011-10-31
| | | | | | | | | | | | | | | | | | | | | | | | The initial bcn filtering implementation was validated on a kernel baseline that predated the switch to new libata error handling. Also, prior to that conversion we borrowed the mvsas MVS_DEV_EH approach to prevent the unwanted extra ap->ops->phy_reset(ap) that occurred in the ata_bus_probe() path. After the conversion to new libata eh resets at discovery are more frequent and get filtered prematurely by IDEV_EH. The result is that our bcn filtering has been blocked from running and at discovery and it appears to stall discovery completion to the point of triggering hung task timeouts. So, revert the implementation for now. When it returns it will go into libsas proper. The domain rediscovery that takes place due to ->lldd_I_T_nexus_reset() events should now be properly waited for by the ata_port_wait_eh() call in ata_port_probe(). So the hard coded delay in the isci ->lldd_I_T_nexus_reset() and other libsas drivers should help debounce the libsas thread from seeing temporary device removals. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: Fix hard reset timeout conditions.Jeff Skirvin2011-10-31
| | | | | | | | | | | | | | | A hard reset can timeout before or after the last phy in the port goes away. If after, then notify the OS that the last phy has failed. The recovery for the failed hard reset has been removed. This recovery code was unecessary in that the link would recover from the failure normally by a new link reset sequence or hotplug of the remote device. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: No need to manage the pending reset bit on pending requests.Jeff Skirvin2011-10-31
| | | | | | | | | The lldd does not need to look at or manage the pending device reset bit in pending sas_tasks. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: Remove redundant isci_request.ttype field.Jeff Skirvin2011-10-31
| | | | | | | | Use the existing IREQ_TMF flag as a request type indicator. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: Fix task management for SMP, SATA and on dev remove.Jeff Skirvin2011-10-31
| | | | | | | | | | | libsas uses the LLDD abort task interface to handle I/O timeouts in the SATA/STP and SMP discovery paths, so this change will terminate STP/SMP requests. Also, if the device is gone, the lldd will prevent libsas from further escalations in the error handler. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: No task_done callbacks in error handler paths.Jeff Skirvin2011-10-31
| | | | | | | | | libsas will cleanup pending sas_tasks after error handler path functions are called; do not call task_done callbacks. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: Handle task request timeouts correctly.Jeff Skirvin2011-10-31
| | | | | | | | | | | | In the case where "task" requests timeout (note that this class of requests can also include SATA/STP soft reset FIS transmissions), handle the case where the task was being managed by some call to terminate the task request by completing both the tmf and the aborting process. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: Fix tag leak in tasks and terminated requests.Jeff Skirvin2011-10-31
| | | | | | | | Make sure terminated requests and completed task tags are freed. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: Immediately fail I/O to removed devices.Jeff Skirvin2011-10-31
| | | | | | | | | In the case where an I/O fails to start in isci_request_execute, only allow retries if the device is not already gone. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: Lookup device references through requests in completions.Jeff Skirvin2011-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LLDD needs to obtain a reference to the device through the request itself and not through the domain_device, because the domain_device.lldd_dev is set to NULL early in the lldd_dev_gone call. This relies on the fact that the isci_remote_device object is keeping a seperate reference count of outstanding requests. TODO: unify the request count tracking with the isci_remote_device kref. The failure signature of this condition looks like the following log, where the important bits are the call to lldd_dev_gone followed by a crash in isci_terminate_request_core: [ 229.151541] isci 0000:0b:00.0: isci_remote_device_gone: domain_device = ffff8801492d4800, isci_device = ffff880143c657d0, isci_port = ffff880143c63658 [ 229.166007] isci 0000:0b:00.0: isci_remote_device_stop: isci_device = ffff880143c657d0 [ 229.175317] isci 0000:0b:00.0: isci_terminate_pending_requests: idev=ffff880143c657d0 request=ffff88014741f000; task=ffff8801470f46c0 old_state=2 [ 229.189702] isci 0000:0b:00.0: isci_terminate_request_core: device = ffff880143c657d0; request = ffff88014741f000 [ 229.201339] isci 0000:0b:00.0: isci_terminate_request_core: before completion wait (ffff88014741f000/ffff880149715ad0) [ 229.213414] isci 0000:0b:00.0: sci_controller_process_completions: completion queue entry:0x8000a0e9 [ 229.214401] BUG: unable to handle kernel NULL pointer dereference at 0000000000000228 [ 229.214401] IP:jdskirvi-testlbo [<ffffffffa00a58be>] sci_request_completed_state_enter+0x50/0xafb [isci] [ 229.214401] PGD 13d19e067 PUD 13d104067 PMD 0 [ 229.214401] Oops: 0000 [#1] SMP [ 229.214401] CPU 0 x kernel: [ 226 [ 229.214401] Modules linked in: ipv6 dm_multipath uinput nouveau snd_hda_codec_realtek snd_hda_intel ttm drm_kms_helper drm snd_hda_codec snd_hwdep snd_pcm snd_timer i2c_algo_bit isci snd libsas ioatdma mxm_wmi iTCO_wdt soundcore snd_page_alloc scsi_transport_sas iTCO_vendor_support wmi dca video i2c_i801 i2c_core [last unloaded: speedstep_lib] [ 229.214401] [ 229.214401] Pid: 5, comm: kworker/u:0 Not tainted 3.0.0-isci-11.7.29+ #30.353196] Buffer Intel Corporation Stoakley/Pearlcity Workstation [ 229.214401] RIP: 0010:[<ffffffffa00a58be>] I/O error on dev [<ffffffffa00a58be>] sci_request_completed_state_enter+0x50/0xafb [isci] [ 229.214401] RSP: 0018:ffff88014fc03d20 EFLAGS: 00010046 [ 229.214401] RAX: 0000000000000000 RBX: ffff88014741f000 RCX: 0000000000000000 [ 229.214401] RDX: ffffffffa00b2c90 RSI: 0000000000000017 RDI: ffff88014741f0a0 [ 229.214401] RBP: ffff88014fc03d90 R08: 0000000000000018 R09: 0000000000000000 [ 229.214401] R10: 0000000000000000 R11: ffffffff81a17d98 R12: 000000000000001d [ 229.214401] R13: ffff8801470f46c0 R14: 0000000000000000 R15: 0000000000008000 [ 229.214401] FS: 0000000000000000(0000) GS:ffff88014fc00000(0000) knlGS:0000000000000000 [ 229.214401] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 229.214401] CR2: 0000000000000228 CR3: 000000013ceaa000 CR4: 00000000000406f0 [ 229.214401] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 229.214401] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 229.214401] Process kworker/u:0 (pid: 5, threadinfo ffff880149714000, task ffff880149718000) [ 229.214401] Call Trace: [ 229.214401] <IRQ> [ 229.214401] [<ffffffffa00aa6ce>] sci_change_state+0x4a/0x4f [isci] [ 229.214401] [<ffffffffa00a4ca6>] sci_io_request_tc_completion+0x79c/0x7a0 [isci] [ 229.214401] [<ffffffffa00acf35>] sci_controller_process_completions+0x14f/0x396 [isci] [ 229.214401] [<ffffffffa00abbda>] ? spin_lock_irq+0xe/0x10 [isci] [ 229.214401] [<ffffffffa00ad2cf>] isci_host_completion_routine+0x71/0x2be [isci] [ 229.214401] [<ffffffff8107c6b3>] ? mark_held_locks+0x52/0x70 [ 229.214401] [<ffffffff810538e8>] tasklet_action+0x90/0xf1 [ 229.214401] [<ffffffff81054050>] __do_softirq+0xe5/0x1bf [ 229.214401] [<ffffffff8106d9d1>] ? hrtimer_interrupt+0x129/0x1bb [ 229.214401] [<ffffffff814ff69c>] call_softirq+0x1c/0x30 [ 229.214401] [<ffffffff8100bb67>] do_softirq+0x4b/0xa3 [ 229.214401] [<ffffffff81053d84>] irq_exit+0x53/0xb4 [ 229.214401] [<ffffffff814fffe7>] smp_apic_timer_interrupt+0x83/0x91 [ 229.214401] [<ffffffff814fee53>] apic_timer_interrupt+0x13/0x20 [ 229.214401] <EOI> [ 229.214401] [<ffffffff814f7ad4>] ? retint_restore_args+0x13/0x13 [ 229.214401] [<ffffffff8107af29>] ? trace_hardirqs_off+0xd/0xf [ 229.214401] [<ffffffff8104ea71>] ? vprintk+0x40b/0x452 [ 229.214401] [<ffffffff814f4b5a>] printk+0x41/0x47 [ 229.214401] [<ffffffff81314484>] __dev_printk+0x78/0x7a [ 229.214401] [<ffffffff8131471e>] dev_printk+0x45/0x47 [ 229.214401] [<ffffffffa00ae2a3>] isci_terminate_request_core+0x15d/0x317 [isci] [ 229.214401] [<ffffffffa00af1ad>] isci_terminate_pending_requests+0x1a4/0x204 [isci] [ 229.214401] [<ffffffffa00229f6>] ? sas_phye_oob_error+0xc3/0xc3 [libsas] [ 229.214401] [<ffffffffa00a7d9e>] isci_remote_device_nuke_requests+0xa6/0xff [isci] [ 229.214401] [<ffffffffa00a811a>] isci_remote_device_stop+0x7c/0x166 [isci] [ 229.214401] [<ffffffffa00229f6>] ? sas_phye_oob_error+0xc3/0xc3 [libsas] [ 229.214401] [<ffffffffa00a827a>] isci_remote_device_gone+0x76/0x7e [isci] [ 229.214401] [<ffffffffa002363e>] sas_notify_lldd_dev_gone+0x34/0x36 [libsas] [ 229.214401] [<ffffffffa0023945>] sas_unregister_dev+0x57/0x9c [libsas] [ 229.214401] [<ffffffffa00239c0>] sas_unregister_domain_devices+0x36/0x65 [libsas] [ 229.214401] [<ffffffffa0022cb8>] sas_deform_port+0x72/0x1ac [libsas] [ 229.214401] [<ffffffffa00229f6>] ? sas_phye_oob_error+0xc3/0xc3 [libsas] [ 229.214401] [<ffffffffa0022a34>] sas_phye_loss_of_signal+0x3e/0x42 [libsas] Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2011-10-28
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ...
| * [SCSI] isci: export phy events via ->lldd_control_phy()Dan Williams2011-10-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow the sas-transport-class to update events for local phys via a new PHY_FUNC_GET_EVENTS command to ->lldd_control_phy(). Fixup drivers that are not prepared for new enum phy_func values, and unify ->lldd_control_phy() error codes. These are the SAS defined phy events that are reported in a smp-report-phy-error-log command: * /sys/class/sas_phy/<phyX>/invalid_dword_count * /sys/class/sas_phy/<phyX>/running_disparity_error_count * /sys/class/sas_phy/<phyX>/loss_of_dword_sync_count * /sys/class/sas_phy/<phyX>/phy_reset_problem_count Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: The port state should be set to stopping on the last phy.Jeff Skirvin2011-10-02
| | | | | | | | | | | | | | | | | | | | Fixes a bug where any phy removed from the port set the port state to "stopping" - do this only when the last phy removed from the port. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: fix decode of DONE_CRC_ERR TC completion statusJeff Skirvin2011-10-02
| | | | | | | | | | | | | | | | | | | | DONE_CRC_ERR is not a RNC suspension condition, so do not change the state to expect the incoming suspension notification. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> [djbw: dropped DONE_CMD_LL_R_ERR change] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: SATA/STP I/O is only returned in the normal path to libsasJeff Skirvin2011-10-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since libsas has it's own means to escalate SATA/STP device error handling depending on task status codes, return all SATA/STP I/O on the normal path. i.e. skip sas_task_abort() and let sas_ata_task_done() disposition the qc. Longer term we want to audit non-essential calls to sas_task_abort(). Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: atapi supportDan Williams2011-10-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on original implementation from Jiangbi Liu and Maciej Trela. ATAPI transfers happen in two-to-three stages. The two stage atapi commands are those that include a dma data transfer. The data transfer portion of these operations is handled by the hardware packet-dma acceleration. The three-stage commands do not have a data transfer and are handled without hardware assistance in raw frame mode. stage1: transmit host-to-device fis to notify the device of an incoming atapi cdb. Upon reception of the pio-setup-fis repost the task_context to perform the dma transfer of the cdb+data (go to stage3), or repost the task_context to transmit the cdb as a raw frame (go to stage 2). stage2: wait for hardware notification of the cdb transmission and then go to stage 3. stage3: wait for the arrival of the terminating device-to-host fis and terminate the command. To keep the implementation simple we only support ATAPI packet-dma protocol (for commands with data) to avoid needing to handle the data transfer manually (like we do for SATA-PIO). This may affect compatibility for a small number of devices (see ATA_HORKAGE_ATAPI_MOD16_DMA). If the data-transfer underruns, or encounters an error the device-to-host fis is expected to arrive in the unsolicited frame queue to pass to libata for disposition. However, in the DONE_UNEXP_FIS (data underrun) case it appears we need to craft a response. In the DONE_REG_ERR case we do receive the UF and propagate it to libsas. Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: fix missed unlock in apc_agent_timeout()Jeff Skirvin2011-10-02
| | | | | | | | | | | | | | | | | | | | | | Needed to jump to scic_lock unlock. Also spotted by coccicheck. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Cc: <stable@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: fix support for large smp requestsDan Williams2011-10-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Kill the local smp response buffer. Besides being unnecessary, it is too small (currently truncates responses to 60 bytes). The mid-layer will have already allocated a sufficiently sized buffer, just kmap and copy into it directly. Cc: <stable@kernel.org> Reported-by: Derick Marks <derick.w.marks@intel.com> Tested-by: Derick Marks <derick.w.marks@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: initial sgpio write supportDan Williams2011-09-22
| | | | | | | | | | | | | | | | | | | | | | | | Basic support to initialize the gpio unit, accept an incomming SAS_GPIO_REG_TX_GP bitstream, and translate it to the ODx.n fields in the hardware registers. If register indexes outside the supported range are specified in the SMP frame we simply accept the write and return how many registers (SFF-8485) were written (libsas reports this as residue in the request). Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: fix sgpio register definitionsDan Williams2011-09-22
| | | | | | | | | | | | | | | | | | | | output_data_select registers are off by one u32 delete the macros we will never use. Reported-by: Artur Wojcik <artur.wojcik@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: export sas_alloc_task()Dan Williams2011-08-27
| | | | | | | | | | | | | | | | | | Now that isci has added a 3rd open coded user of this functionality just share the libsas version. Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | Merge branch 'master' into for-nextJiri Kosina2011-09-15
|\| | | | | | | | | Fast-forward merge with Linus to be able to merge patches based on more recent version of the tree.
| * [SCSI] isci: add version numberDan Williams2011-08-23
| | | | | | | | | | Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: fix event-get pointer incrementDan Williams2011-08-23
| | | | | | | | | | | | | | | | | | Hardware only increments the put pointer on event types >= 4. Do not increment the get pointer for event type 3. Reported-by: Kapil Karkra <kapil.karkra@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: dynamic interrupt coalescingDan Williams2011-08-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware allows both an outstanding number commands and a timeout value (whichever occurs first) as a gate to the next interrupt generation. This scheme at completion time looks at the remaining number of outstanding tasks and sets the timeout to maximize small transaction operation. If transactions are large (take more than a few 10s of microseconds to complete) then performance is not interrupt processing bound, so the small timeouts this scheme generates are overridden by the time it takes for a completion to arrive. Tested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: Leave requests alone if already terminating.Jeff Skirvin2011-08-23
| | | | | | | | | | | | | | | | | | Instead of immediately completing any request that has a second termination call made on it, wait for the TC done/abort HW event. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: Adding documentation to API change and fixup sysfs registrationDave Jiang2011-08-23
| | | | | | | | | | | | | | | | | | Adding API update for adding isci_id entry scsi_host sysfs entry. Also fixing up the sysfs registration to the scsi_host template Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: change sas phy timeouts from 54us to 59usMarcin Tomczak2011-08-23
| | | | | | | | | | | | | | | | | | | | | | | | | | Need the following workaround in the driver for interoperability with the older Intel SSD drives and any other SATA drive that may exhibit the same behavior. This is a corner case where SCU speed is limited to either 3G or 1.5G and the drive has a period of DC idle when it switches speed during SATA speed negotiation. Workaround :change PHYTOV[31:24] from 0x36 to 0x3B. Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: fix 32-bit operation when CONFIG_HIGHMEM64G=nDan Williams2011-08-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The unsolicited frame control infrastructure requires a table of dma addresses for the hardware to lookup the frame buffer location by an index. The hardware expects the elements of this table to be 64-bit quantities, so we cannot reference these elements as dma_addr_t. All unsolicited frame protocols are affected, particularly SATA-PIO and SMP which prevented direct-attached SATA drives and expander-attached drives to not be discovered. Cc: <stable@kernel.org> Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] isci: fix sata response handlingDan Williams2011-08-23
| | | | | | | | | | | | | | | | | | | | A bug (likely copy/paste) that has been carried from the original implementation. The unsolicited frame handling structure returns the d2h fis in the isci_request.stp.rsp buffer. Cc: <stable@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | treewide: remove extra semicolons from various parts of the kernelJustin P. Mattock2011-09-15
|/ | | | | | | | | | This is a resend from the original, changing the title from PATCH to RFC(since this is a review for commit, and I should have put that the first go around). and also removing some of the commit's with ia64 and bash since it is significant. let me know if I might have missed anything etc.. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* [SCSI] isci: fix checkpatch errorsJames Bottomley2011-07-03
| | | | Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* isci: Device reset should request sas_phy_reset(phy, true)Jeff Skirvin2011-07-03
| | | | | | | | | The hard_reset parameter passed to the LLDD in the direct-attached phy control case allows the LLDD to filter link failure events while the direct-attached device reset is executing. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: pare back error messsagesDan Williams2011-07-03
| | | | | | | | The messages emitted from task.c and some from request.c likely duplicate (in a less undertandable way) what is reported by the midlayer. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: cleanup silicon revision detectionDan Williams2011-07-03
| | | | | | | | | Perform checking per-pci device (even though all systems will only have 1 pci device in this generation), and delete support for silicon that does not report a proper revision (i.e. A0). Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: merge scu_unsolicited_frame.h into unsolicited_frame_control.hDan Williams2011-07-03
| | | | | | Does not need its own file. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: merge sata.[ch] into request.cDan Williams2011-07-03
| | | | | | Undo some needless separation. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: kill 'get/set' macrosDan Williams2011-07-03
| | | | | | | | | Most of these simple dereference macros are longer than their open coded equivalent. Deleting enum sci_controller_mode is thrown in for good measure. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: retire scic_sds_ and scic_ prefixesDan Williams2011-07-03
| | | | | | | | | | | | | | The distinction between scic_sds_ scic_ and sci_ are no longer relevant so just unify the prefixes on sci_. The distinction between isci_ and sci_ is historically significant, and useful for comparing the old 'core' to the current Linux driver. 'sci_' represents the former core as well as the routines that are closer to the hardware and protocol than their 'isci_' brethren. sci == sas controller interface. Also unwind the 'sds1' out of the parameter structs. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify isci_host and scic_sds_controllerDan Williams2011-07-03
| | | | | | | | | Remove the distinction between these two implementations and unify on isci_host (local instances named ihost). Hmmm, we had two 'oem_parameters' instances, one was unused... nice. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify isci_remote_device and scic_sds_remote_deviceDan Williams2011-07-03
| | | | | | | | Remove the distinction between these two implementations and unify on isci_remote_device (local instances named idev). Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify isci_port and scic_sds_portDan Williams2011-07-03
| | | | | | | | | | Remove the distinction between these two implementations and unify on isci_port (local instances named iport). The duplicate '->owning_port' and '->isci_port' in both isci_phy and isci_remote_device will be fixed in a later patch... this is just the straightforward rename/unification. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: fix scic_sds_remote_device_terminate_requestsDan Williams2011-07-03
| | | | | | | | | | | | Commit 0815632 "isci: unify remote_device stop_handlers" introduced the possibility that not all requests get terminated if we reach the request_count. Now that we properly reference count devices we don't need this self-defense and can do the straightforward scan of all active requests. Reported-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Acked-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify isci_phy and scic_sds_phyDan Williams2011-07-03
| | | | | | | | | They are one in the same object so remove the distinction. The near duplicate fields (owning_port, and isci_port) will be cleaned up after the scic_sds_port isci_port unification. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify isci_request and scic_sds_requestDan Williams2011-07-03
| | | | | | | | | They are one in the same object so remove the distinction. The near duplicate fields (owning_controller, and isci_host) will be cleaned up after the scic_sds_contoller isci_host unification. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: rename / clean up scic_sds_stp_requestDan Williams2011-07-03
| | | | | | | | * Rename scic_sds_stp_request to isci_stp_request * Remove the unused fields and union indirection Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: preallocate requestsDan Williams2011-07-03
| | | | | | | | | | | the dma_pool interface is optimized for object_size << page_size which is not the case with isci_request objects and the dma_pool routines show up in the top of the profile. The old io_request_table which tracked whether tci slots were in-flight or not is replaced with an IREQ_ACTIVE flag per request. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: combine request flagsDan Williams2011-07-03
| | | | | | | Combine three bools into one unsigned long 'flags'. Doesn't increase the request size due to packing. (to do: optimize the structure layout). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify can_queue tracking on the tci_pool, uplevel tag assignmentDan Williams2011-07-03
| | | | | | | | | | | | | | | | | | | | | | The tci_pool tracks our outstanding command slots which are also the 'index' portion of our tags. Grabbing the tag early in ->lldd_execute_task let's us drop the isci_host_can_queue() and ->was_tag_assigned_by_user infrastructure. ->was_tag_assigned_by_user required the task context to be duplicated in request-local buffer. With the tci established early we can build the task_context directly into its final location and skip a memcpy. With the task context buffer at a known address at request construction we have the opportunity/obligation to also fix sgl handling. This rework feels like it belongs in another patch but the sgl handling and task_context are too intertwined. 1/ fix the 'ab' pair embedded in the task context to point to the 'cd' pair in the task context (previously we were prematurely linking to the staging buffer). 2/ fix the broken iteration of pio sgls that assumes all sgls are relative to the request, and does a dangerous looking reverse lookup of physical address to virtual address. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-22 11:09:15 -0400