8 files changed, 13 insertions, 12 deletions

diff --git a/sound/pci/ca0106/ca0106_proc.c b/sound/pci/ca0106/ca0106_proc.c
index c62b7d10ec6..8d13092300d 100644
--- a/sound/pci/ca0106/ca0106_proc.c
+++ b/sound/pci/ca0106/ca0106_proc.c
@@ -233,7 +233,7 @@ static void snd_ca0106_proc_dump_iec958( struct snd_info_buffer *buffer, u32 val
                         snd_iprintf(buffer, "user-defined\n");
                         break;
                 default:
-                        snd_iprintf(buffer, "unkown\n");
+                        snd_iprintf(buffer, "unknown\n");
                         break;
                 }
                 snd_iprintf(buffer, "Sample Bits: ");
diff --git a/sound/pci/cs46xx/imgs/cwcdma.asp b/sound/pci/cs46xx/imgs/cwcdma.asp
index 09d24c76f03..a65e1193c89 100644
--- a/sound/pci/cs46xx/imgs/cwcdma.asp
+++ b/sound/pci/cs46xx/imgs/cwcdma.asp
@@ -26,10 +26,11 @@
 //
 //
 // The purpose of this code is very simple: make it possible to tranfser
-// the samples 'as they are' with no alteration from a PCMreader SCB (DMA from host)
-// to any other SCB. This is useful for AC3 throug SPDIF. SRC (source rate converters) 
-// task always alters the samples in some how, however it's from 48khz -> 48khz. The
-// alterations are not audible, but AC3 wont work. 
+// the samples 'as they are' with no alteration from a PCMreader
+// SCB (DMA from host) to any other SCB. This is useful for AC3 through SPDIF.
+// SRC (source rate converters) task always alters the samples in somehow,
+// however it's from 48khz -> 48khz.
+// The alterations are not audible, but AC3 wont work. 
 //
 //        ...
 //         |
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 36e08bd2b3c..360e3809a60 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -184,7 +184,7 @@ MODULE_PARM_DESC(enable, "Enable the EMU10K1X soundcard.");
  * The hardware has 3 channels for playback and 1 for capture.
  *  - channel 0 is the front channel
  *  - channel 1 is the rear channel
- *  - channel 2 is the center/lfe chanel
+ *  - channel 2 is the center/lfe channel
  * Volume is controlled by the AC97 for the front and rear channels by
  * the PCM Playback Volume, Sigmatel Surround Playback Volume and 
  * Surround Playback Volume. The Sigmatel 4-Speaker Stereo switch affects
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index 8ba306856d3..7b0446fa600 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -947,7 +947,7 @@ static void init_input(struct hda_codec *codec)
                 coef |= 0x0500; /* DMIC2 enable 2 channels, disable GPIO1 */
         if (is_active_pin(codec, CS_DMIC1_PIN_NID))
                 coef |= 0x1800; /* DMIC1 enable 2 channels, disable GPIO0 
-                                 * No effect if SPDIF_OUT2 is slected in 
+                                 * No effect if SPDIF_OUT2 is selected in 
                                  * IDX_SPDIF_CTL.
                                   */
         cs_vendor_coef_set(codec, IDX_ADC_CFG, coef);
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index 780e1a72114..8917071d5b6 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -66,7 +66,7 @@ struct cmi_spec {
 
         struct hda_pcm pcm_rec[2];      /* PCM information */
 
-        /* pin deafault configuration */
+        /* pin default configuration */
         hda_nid_t pin_nid[NUM_PINS];
         unsigned int def_conf[NUM_PINS];
         unsigned int pin_def_confs;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 70583719282..f7d5657b16b 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6619,7 +6619,7 @@ static struct hda_input_mux alc889A_mb31_capture_source = {
                 /* Front Mic (0x01) unused */
                 { "Line", 0x2 },
                 /* Line 2 (0x03) unused */
-                /* CD (0x04) unsused? */
+                /* CD (0x04) unused? */
         },
 };
 
diff --git a/sound/pci/ice1712/juli.c b/sound/pci/ice1712/juli.c
index fd948bfd9ae..9c0f78ea2c4 100644
--- a/sound/pci/ice1712/juli.c
+++ b/sound/pci/ice1712/juli.c
@@ -380,7 +380,7 @@ static struct snd_kcontrol_new juli_mute_controls[] __devinitdata = {
          * inputs) are fed from Xilinx.
          *
          * I even checked traces on board and coded a support in driver for
-         * an alternative possiblity - the unused I2S ICE output channels
+         * an alternative possibility - the unused I2S ICE output channels
          * switched to HW-IN/SPDIF-IN and providing the monitoring signal to
          * the DAC - to no avail. The I2S outputs seem to be unconnected.
          *
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 0dce331a2a3..a1b10d1a384 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -3017,7 +3017,7 @@ snd_hdspm_proc_read_madi(struct snd_info_entry * entry,
                 insel = "Coaxial";
                 break;
         default:
-                insel = "Unkown";
+                insel = "Unknown";
         }
 
         switch (hdspm->control_register & HDSPM_SyncRefMask) {
@@ -3028,7 +3028,7 @@ snd_hdspm_proc_read_madi(struct snd_info_entry * entry,
                 syncref = "MADI";
                 break;
         default:
-                syncref = "Unkown";
+                syncref = "Unknown";
         }
         snd_iprintf(buffer, "Inputsel = %s, SyncRef = %s\n", insel,
                     syncref);