26 files changed, 410 insertions, 57 deletions

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index c7a032a4f0c..d214448b677 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -78,8 +78,7 @@ static inline int ep_to_bit(struct ci13xxx *ci, int n)
 }
 
 /**
- * hw_device_state: enables/disables interrupts & starts/stops device (execute
- *                  without interruption)
+ * hw_device_state: enables/disables interrupts (execute without interruption)
  * @dma: 0 => disable, !0 => enable and set dma engine
  *
  * This function returns an error code
@@ -91,9 +90,7 @@ static int hw_device_state(struct ci13xxx *ci, u32 dma)
                 /* interrupt, error, port change, reset, sleep/suspend */
                 hw_write(ci, OP_USBINTR, ~0,
                              USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
-                hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
         } else {
-                hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
                 hw_write(ci, OP_USBINTR, ~0, 0);
         }
         return 0;
@@ -774,10 +771,7 @@ __acquires(mEp->lock)
 {
         struct ci13xxx_req *mReq, *mReqTemp;
         struct ci13xxx_ep *mEpTemp = mEp;
-        int uninitialized_var(retval);
-
-        if (list_empty(&mEp->qh.queue))
-                return -EINVAL;
+        int retval = 0;
 
         list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue,
                         queue) {
@@ -1420,6 +1414,21 @@ static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
         return -ENOTSUPP;
 }
 
+/* Change Data+ pullup status
+ * this func is used by usb_gadget_connect/disconnet
+ */
+static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on)
+{
+        struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
+
+        if (is_on)
+                hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
+        else
+                hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+
+        return 0;
+}
+
 static int ci13xxx_start(struct usb_gadget *gadget,
                          struct usb_gadget_driver *driver);
 static int ci13xxx_stop(struct usb_gadget *gadget,
@@ -1432,6 +1441,7 @@ static int ci13xxx_stop(struct usb_gadget *gadget,
 static const struct usb_gadget_ops usb_gadget_ops = {
         .vbus_session   = ci13xxx_vbus_session,
         .wakeup         = ci13xxx_wakeup,
+        .pullup         = ci13xxx_pullup,
         .vbus_draw      = ci13xxx_vbus_draw,
         .udc_start      = ci13xxx_start,
         .udc_stop       = ci13xxx_stop,
@@ -1455,7 +1465,12 @@ static int init_eps(struct ci13xxx *ci)
 
                         mEp->ep.name      = mEp->name;
                         mEp->ep.ops       = &usb_ep_ops;
-                        mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
+                        /*
+                         * for ep0: maxP defined in desc, for other
+                         * eps, maxP is set by epautoconfig() called
+                         * by gadget layer
+                         */
+                        mEp->ep.maxpacket = (unsigned short)~0;
 
                         INIT_LIST_HEAD(&mEp->qh.queue);
                         mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
@@ -1475,6 +1490,7 @@ static int init_eps(struct ci13xxx *ci)
                                 else
                                         ci->ep0in = mEp;
 
+                                mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
                                 continue;
                         }
 
@@ -1484,6 +1500,17 @@ static int init_eps(struct ci13xxx *ci)
         return retval;
 }
 
+static void destroy_eps(struct ci13xxx *ci)
+{
+        int i;
+
+        for (i = 0; i < ci->hw_ep_max; i++) {
+                struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
+
+                dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
+        }
+}
+
 /**
  * ci13xxx_start: register a gadget driver
  * @gadget: our gadget
@@ -1691,7 +1718,7 @@ static int udc_start(struct ci13xxx *ci)
         if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
                 if (ci->transceiver == NULL) {
                         retval = -ENODEV;
-                        goto free_pools;
+                        goto destroy_eps;
                 }
         }
 
@@ -1729,7 +1756,7 @@ static int udc_start(struct ci13xxx *ci)
 
 remove_trans:
         if (!IS_ERR_OR_NULL(ci->transceiver)) {
-                otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
+                otg_set_peripheral(ci->transceiver->otg, NULL);
                 if (ci->global_phy)
                         usb_put_phy(ci->transceiver);
         }
@@ -1742,6 +1769,8 @@ unreg_device:
 put_transceiver:
         if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy)
                 usb_put_phy(ci->transceiver);
+destroy_eps:
+        destroy_eps(ci);
 free_pools:
         dma_pool_destroy(ci->td_pool);
 free_qh_pool:
@@ -1756,18 +1785,12 @@ free_qh_pool:
  */
 static void udc_stop(struct ci13xxx *ci)
 {
-        int i;
-
         if (ci == NULL)
                 return;
 
         usb_del_gadget_udc(&ci->gadget);
 
-        for (i = 0; i < ci->hw_ep_max; i++) {
-                struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
-
-                dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
-        }
+        destroy_eps(ci);
 
         dma_pool_destroy(ci->td_pool);
         dma_pool_destroy(ci->qh_pool);
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 65a55abb791..5f0cb417b73 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -109,12 +109,14 @@ static struct usb_driver wdm_driver;
 /* return intfdata if we own the interface, else look up intf in the list */
 static struct wdm_device *wdm_find_device(struct usb_interface *intf)
 {
-        struct wdm_device *desc = NULL;
+        struct wdm_device *desc;
 
         spin_lock(&wdm_device_list_lock);
         list_for_each_entry(desc, &wdm_device_list, device_list)
                 if (desc->intf == intf)
-                        break;
+                        goto found;
+        desc = NULL;
+found:
         spin_unlock(&wdm_device_list_lock);
 
         return desc;
@@ -122,12 +124,14 @@ static struct wdm_device *wdm_find_device(struct usb_interface *intf)
 
 static struct wdm_device *wdm_find_device_by_minor(int minor)
 {
-        struct wdm_device *desc = NULL;
+        struct wdm_device *desc;
 
         spin_lock(&wdm_device_list_lock);
         list_for_each_entry(desc, &wdm_device_list, device_list)
                 if (desc->intf->minor == minor)
-                        break;
+                        goto found;
+        desc = NULL;
+found:
         spin_unlock(&wdm_device_list_lock);
 
         return desc;
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f15501f4c58..e77a8e8eaa2 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -71,6 +71,10 @@ static const struct usb_device_id usb_quirk_list[] = {
         { USB_DEVICE(0x04b4, 0x0526), .driver_info =
                         USB_QUIRK_CONFIG_INTF_STRINGS },
 
+        /* Microchip Joss Optical infrared touchboard device */
+        { USB_DEVICE(0x04d8, 0x000c), .driver_info =
+                        USB_QUIRK_CONFIG_INTF_STRINGS },
+
         /* Samsung Android phone modem - ID conflict with SPH-I500 */
         { USB_DEVICE(0x04e8, 0x6601), .driver_info =
                         USB_QUIRK_CONFIG_INTF_STRINGS },
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c34452a7304..a68ff53124d 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -436,16 +436,21 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
                 dev_err(dev, "missing IRQ\n");
                 return -ENODEV;
         }
-        dwc->xhci_resources[1] = *res;
+        dwc->xhci_resources[1].start = res->start;
+        dwc->xhci_resources[1].end = res->end;
+        dwc->xhci_resources[1].flags = res->flags;
+        dwc->xhci_resources[1].name = res->name;
 
         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         if (!res) {
                 dev_err(dev, "missing memory resource\n");
                 return -ENODEV;
         }
-        dwc->xhci_resources[0] = *res;
+        dwc->xhci_resources[0].start = res->start;
         dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
                                         DWC3_XHCI_REGS_END;
+        dwc->xhci_resources[0].flags = res->flags;
+        dwc->xhci_resources[0].name = res->name;
 
          /*
           * Request memory region but exclude xHCI regs,
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 9b94886b66e..e4d5ca86b9d 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -720,7 +720,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
                 transferred = min_t(u32, ur->length,
                                 transfer_size - length);
                 memcpy(ur->buf, dwc->ep0_bounce, transferred);
-                dwc->ep0_bounced = false;
         } else {
                 transferred = ur->length - length;
         }
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 58fdfad96b4..c2813c2b005 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -263,8 +263,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
         if (req->request.status == -EINPROGRESS)
                 req->request.status = status;
 
-        usb_gadget_unmap_request(&dwc->gadget, &req->request,
-                        req->direction);
+        if (dwc->ep0_bounced && dep->number == 0)
+                dwc->ep0_bounced = false;
+        else
+                usb_gadget_unmap_request(&dwc->gadget, &req->request,
+                                req->direction);
 
         dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
                         req, dep->name, req->request.actual,
@@ -1026,6 +1029,7 @@ static void __dwc3_gadget_start_isoc(struct dwc3 *dwc,
         if (list_empty(&dep->request_list)) {
                 dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
                         dep->name);
+                dep->flags |= DWC3_EP_PENDING_REQUEST;
                 return;
         }
 
@@ -1089,6 +1093,17 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
         if (dep->flags & DWC3_EP_PENDING_REQUEST) {
                 int     ret;
 
+                /*
+                 * If xfernotready is already elapsed and it is a case
+                 * of isoc transfer, then issue END TRANSFER, so that
+                 * you can receive xfernotready again and can have
+                 * notion of current microframe.
+                 */
+                if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+                        dwc3_stop_active_transfer(dwc, dep->number);
+                        return 0;
+                }
+
                 ret = __dwc3_gadget_kick_transfer(dep, 0, true);
                 if (ret && ret != -EBUSY) {
                         struct dwc3     *dwc = dep->dwc;
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index c9e66dfb02e..1e35963bd4e 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -475,8 +475,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
         unsigned long   flags;
 
         if (!_ep || !ep
-                        || !desc || ep->ep.desc
-                        || _ep->name == ep0name
+                        || !desc || _ep->name == ep0name
                         || desc->bDescriptorType != USB_DT_ENDPOINT
                         || (maxpacket = usb_endpoint_maxp(desc)) == 0
                         || maxpacket > ep->maxpacket) {
@@ -530,7 +529,6 @@ ok:
         tmp |= AT91_UDP_EPEDS;
         __raw_writel(tmp, ep->creg);
 
-        ep->ep.desc = desc;
         ep->ep.maxpacket = maxpacket;
 
         /*
@@ -1635,7 +1633,6 @@ static int at91_start(struct usb_gadget *gadget,
         udc->driver = driver;
         udc->gadget.dev.driver = &driver->driver;
         udc->gadget.dev.of_node = udc->pdev->dev.of_node;
-        dev_set_drvdata(&udc->gadget.dev, &driver->driver);
         udc->enabled = 1;
         udc->selfpowered = 1;
 
@@ -1656,7 +1653,6 @@ static int at91_stop(struct usb_gadget *gadget,
         spin_unlock_irqrestore(&udc->lock, flags);
 
         udc->gadget.dev.driver = NULL;
-        dev_set_drvdata(&udc->gadget.dev, NULL);
         udc->driver = NULL;
 
         DBG("unbound from %s\n", driver->driver.name);
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index b799106027a..afdbb1cbf5d 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1916,6 +1916,27 @@ done:
         return retval;
 }
 
+/* usb 3.0 root hub device descriptor */
+struct {
+        struct usb_bos_descriptor bos;
+        struct usb_ss_cap_descriptor ss_cap;
+} __packed usb3_bos_desc = {
+
+        .bos = {
+                .bLength                = USB_DT_BOS_SIZE,
+                .bDescriptorType        = USB_DT_BOS,
+                .wTotalLength           = cpu_to_le16(sizeof(usb3_bos_desc)),
+                .bNumDeviceCaps         = 1,
+        },
+        .ss_cap = {
+                .bLength                = USB_DT_USB_SS_CAP_SIZE,
+                .bDescriptorType        = USB_DT_DEVICE_CAPABILITY,
+                .bDevCapabilityType     = USB_SS_CAP_TYPE,
+                .wSpeedSupported        = cpu_to_le16(USB_5GBPS_OPERATION),
+                .bFunctionalitySupport  = ilog2(USB_5GBPS_OPERATION),
+        },
+};
+
 static inline void
 ss_hub_descriptor(struct usb_hub_descriptor *desc)
 {
@@ -2006,6 +2027,18 @@ static int dummy_hub_control(
                 else
                         hub_descriptor((struct usb_hub_descriptor *) buf);
                 break;
+
+        case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+                if (hcd->speed != HCD_USB3)
+                        goto error;
+
+                if ((wValue >> 8) != USB_DT_BOS)
+                        goto error;
+
+                memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
+                retval = sizeof(usb3_bos_desc);
+                break;
+
         case GetHubStatus:
                 *(__le32 *) buf = cpu_to_le32(0);
                 break;
@@ -2503,10 +2536,8 @@ static int dummy_hcd_probe(struct platform_device *pdev)
         hs_hcd->has_tt = 1;
 
         retval = usb_add_hcd(hs_hcd, 0, 0);
-        if (retval != 0) {
-                usb_put_hcd(hs_hcd);
-                return retval;
-        }
+        if (retval)
+                goto put_usb2_hcd;
 
         if (mod_data.is_super_speed) {
                 ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
@@ -2525,6 +2556,8 @@ static int dummy_hcd_probe(struct platform_device *pdev)
 put_usb3_hcd:
         usb_put_hcd(ss_hcd);
 dealloc_usb2_hcd:
+        usb_remove_hcd(hs_hcd);
+put_usb2_hcd:
         usb_put_hcd(hs_hcd);
         the_controller.hs_hcd = the_controller.ss_hcd = NULL;
         return retval;
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 8adc79d1b40..829aba75a6d 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -34,11 +34,15 @@
 /* Debugging ****************************************************************/
 
 #ifdef VERBOSE_DEBUG
+#ifndef pr_vdebug
 #  define pr_vdebug pr_debug
+#endif /* pr_vdebug */
 #  define ffs_dump_mem(prefix, ptr, len) \
         print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len)
 #else
+#ifndef pr_vdebug
 #  define pr_vdebug(...)                 do { } while (0)
+#endif /* pr_vdebug */
 #  define ffs_dump_mem(prefix, ptr, len) do { } while (0)
 #endif /* VERBOSE_DEBUG */
 
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index b13e0bb5f5b..0bb617e1dda 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -3599,6 +3599,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 
         if (hsotg->num_of_eps == 0) {
                 dev_err(dev, "wrong number of EPs (zero)\n");
+                ret = -EINVAL;
                 goto err_supplies;
         }
 
@@ -3606,6 +3607,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
                       GFP_KERNEL);
         if (!eps) {
                 dev_err(dev, "cannot get memory\n");
+                ret = -ENOMEM;
                 goto err_supplies;
         }
 
@@ -3622,6 +3624,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
                                                      GFP_KERNEL);
         if (!hsotg->ctrl_req) {
                 dev_err(dev, "failed to allocate ctrl req\n");
+                ret = -ENOMEM;
                 goto err_ep_mem;
         }
 
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 5b3f5fffea9..da6d479ff9a 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -132,11 +132,15 @@ static unsigned	n_ports;
 
 
 #ifdef VERBOSE_DEBUG
+#ifndef pr_vdebug
 #define pr_vdebug(fmt, arg...) \
         pr_debug(fmt, ##arg)
+#endif /* pr_vdebug */
 #else
+#ifndef pr_vdebig
 #define pr_vdebug(fmt, arg...) \
         ({ if (0) pr_debug(fmt, ##arg); })
+#endif /* pr_vdebug */
 #endif
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 9bc39ca460c..4b66374bdc8 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -128,9 +128,17 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
         else {
                 qtd = list_entry (qh->qtd_list.next,
                                 struct ehci_qtd, qtd_list);
-                /* first qtd may already be partially processed */
-                if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current)
+                /*
+                 * first qtd may already be partially processed.
+                 * If we come here during unlink, the QH overlay region
+                 * might have reference to the just unlinked qtd. The
+                 * qtd is updated in qh_completions(). Update the QH
+                 * overlay here.
+                 */
+                if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+                        qh->hw->hw_qtd_next = qtd->hw_next;
                         qtd = NULL;
+                }
         }
 
         if (qtd)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index a665b3eaa74..aaa8d2bce21 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -570,6 +570,16 @@ static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 
         if (pdata) {
                 at91_for_each_port(i) {
+                        /*
+                         * do not configure PIO if not in relation with
+                         * real USB port on board
+                         */
+                        if (i >= pdata->ports) {
+                                pdata->vbus_pin[i] = -EINVAL;
+                                pdata->overcurrent_pin[i] = -EINVAL;
+                                break;
+                        }
+
                         if (!gpio_is_valid(pdata->vbus_pin[i]))
                                 continue;
                         gpio = pdata->vbus_pin[i];
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index c5e9e4a76f1..966d1484ee7 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -75,7 +75,9 @@
 #define NB_PIF0_PWRDOWN_1       0x01100013
 
 #define USB_INTEL_XUSB2PR      0xD0
+#define USB_INTEL_USB2PRM      0xD4
 #define USB_INTEL_USB3_PSSEN   0xD8
+#define USB_INTEL_USB3PRM      0xDC
 
 static struct amd_chipset_info {
         struct pci_dev  *nb_dev;
@@ -772,10 +774,18 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
                 return;
         }
 
-        ports_available = 0xffffffff;
+        /* Read USB3PRM, the USB 3.0 Port Routing Mask Register
+         * Indicate the ports that can be changed from OS.
+         */
+        pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
+                        &ports_available);
+
+        dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
+                        ports_available);
+
         /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
-         * Register, to turn on SuperSpeed terminations for all
-         * available ports.
+         * Register, to turn on SuperSpeed terminations for the
+         * switchable ports.
          */
         pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
                         cpu_to_le32(ports_available));
@@ -785,7 +795,16 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
         dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
                         "under xHCI: 0x%x\n", ports_available);
 
-        ports_available = 0xffffffff;
+        /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
+         * Indicate the USB 2.0 ports to be controlled by the xHCI host.
+         */
+
+        pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
+                        &ports_available);
+
+        dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
+                        ports_available);
+
         /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
          * switch the USB 2.0 power and data lines over to the xHCI
          * host.
@@ -822,12 +841,12 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
         void __iomem *op_reg_base;
         u32 val;
         int timeout;
+        int len = pci_resource_len(pdev, 0);
 
         if (!mmio_resource_enabled(pdev, 0))
                 return;
 
-        base = ioremap_nocache(pci_resource_start(pdev, 0),
-                                pci_resource_len(pdev, 0));
+        base = ioremap_nocache(pci_resource_start(pdev, 0), len);
         if (base == NULL)
                 return;
 
@@ -837,9 +856,17 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
          */
         ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
         do {
+                if ((ext_cap_offset + sizeof(val)) > len) {
+                        /* We're reading garbage from the controller */
+                        dev_warn(&pdev->dev,
+                                 "xHCI controller failing to respond");
+                        return;
+                }
+
                 if (!ext_cap_offset)
                         /* We've reached the end of the extended capabilities */
                         goto hc_init;
+
                 val = readl(base + ext_cap_offset);
                 if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
                         break;
@@ -870,9 +897,10 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
         /* Disable any BIOS SMIs and clear all SMI events*/
         writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
 
+hc_init:
         if (usb_is_intel_switchable_xhci(pdev))
                 usb_enable_xhci_ports(pdev);
-hc_init:
+
         op_reg_base = base + XHCI_HC_LENGTH(readl(base));
 
         /* Wait for the host controller to be ready before writing any
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index ef004a5de20..7f69a39163c 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -15,6 +15,7 @@ void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
 static inline void usb_amd_dev_put(void) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 #endif  /* CONFIG_PCI */
 
 #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 74bfc868b7a..d5eb357aa5c 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -493,11 +493,48 @@ static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
                  * when this bit is set.
                  */
                 pls |= USB_PORT_STAT_CONNECTION;
+        } else {
+                /*
+                 * If CAS bit isn't set but the Port is already at
+                 * Compliance Mode, fake a connection so the USB core
+                 * notices the Compliance state and resets the port.
+                 * This resolves an issue generated by the SN65LVPE502CP
+                 * in which sometimes the port enters compliance mode
+                 * caused by a delay on the host-device negotiation.
+                 */
+                if (pls == USB_SS_PORT_LS_COMP_MOD)
+                        pls |= USB_PORT_STAT_CONNECTION;
         }
+
         /* update status field */
         *status |= pls;
 }
 
+/*
+ * Function for Compliance Mode Quirk.
+ *
+ * This Function verifies if all xhc USB3 ports have entered U0, if so,
+ * the compliance mode timer is deleted. A port won't enter
+ * compliance mode if it has previously entered U0.
+ */
+void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
+{
+        u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1);
+        bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
+
+        if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+                return;
+
+        if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
+                xhci->port_status_u0 |= 1 << wIndex;
+                if (xhci->port_status_u0 == all_ports_seen_u0) {
+                        del_timer_sync(&xhci->comp_mode_recovery_timer);
+                        xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n");
+                        xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n");
+                }
+        }
+}
+
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                 u16 wIndex, char *buf, u16 wLength)
 {
@@ -651,6 +688,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                 /* Update Port Link State for super speed ports*/
                 if (hcd->speed == HCD_USB3) {
                         xhci_hub_report_link_state(&status, temp);
+                        /*
+                         * Verify if all USB3 Ports Have entered U0 already.
+                         * Delete Compliance Mode Timer if so.
+                         */
+                        xhci_del_comp_mod_timer(xhci, temp, wIndex);
                 }
                 if (bus_state->port_c_suspend & (1 << wIndex))
                         status |= 1 << USB_PORT_FEAT_C_SUSPEND;
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 689bc18b051..df90fe51b4a 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -118,7 +118,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
                 goto put_hcd;
         }
 
-        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+        hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
         if (!hcd->regs) {
                 dev_dbg(&pdev->dev, "error mapping memory\n");
                 ret = -EFAULT;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c59d5b5b6c7..6ece0ed288d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
+#include <linux/dmi.h>
 
 #include "xhci.h"
 
@@ -398,6 +399,95 @@ static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
 
 #endif
 
+static void compliance_mode_recovery(unsigned long arg)
+{
+        struct xhci_hcd *xhci;
+        struct usb_hcd *hcd;
+        u32 temp;
+        int i;
+
+        xhci = (struct xhci_hcd *)arg;
+
+        for (i = 0; i < xhci->num_usb3_ports; i++) {
+                temp = xhci_readl(xhci, xhci->usb3_ports[i]);
+                if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+                        /*
+                         * Compliance Mode Detected. Letting USB Core
+                         * handle the Warm Reset
+                         */
+                        xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n",
+                                        i + 1);
+                        xhci_dbg(xhci, "Attempting Recovery routine!\n");
+                        hcd = xhci->shared_hcd;
+
+                        if (hcd->state == HC_STATE_SUSPENDED)
+                                usb_hcd_resume_root_hub(hcd);
+
+                        usb_hcd_poll_rh_status(hcd);
+                }
+        }
+
+        if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1))
+                mod_timer(&xhci->comp_mode_recovery_timer,
+                        jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+/*
+ * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver
+ * that causes ports behind that hardware to enter compliance mode sometimes.
+ * The quirk creates a timer that polls every 2 seconds the link state of
+ * each host controller's port and recovers it by issuing a Warm reset
+ * if Compliance mode is detected, otherwise the port will become "dead" (no
+ * device connections or disconnections will be detected anymore). Becasue no
+ * status event is generated when entering compliance mode (per xhci spec),
+ * this quirk is needed on systems that have the failing hardware installed.
+ */
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+        xhci->port_status_u0 = 0;
+        init_timer(&xhci->comp_mode_recovery_timer);
+
+        xhci->comp_mode_recovery_timer.data = (unsigned long) xhci;
+        xhci->comp_mode_recovery_timer.function = compliance_mode_recovery;
+        xhci->comp_mode_recovery_timer.expires = jiffies +
+                        msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+
+        set_timer_slack(&xhci->comp_mode_recovery_timer,
+                        msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+        add_timer(&xhci->comp_mode_recovery_timer);
+        xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n");
+}
+
+/*
+ * This function identifies the systems that have installed the SN65LVPE502CP
+ * USB3.0 re-driver and that need the Compliance Mode Quirk.
+ * Systems:
+ * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
+ */
+static bool compliance_mode_recovery_timer_quirk_check(void)
+{
+        const char *dmi_product_name, *dmi_sys_vendor;
+
+        dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+        dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+
+        if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
+                return false;
+
+        if (strstr(dmi_product_name, "Z420") ||
+                        strstr(dmi_product_name, "Z620") ||
+                        strstr(dmi_product_name, "Z820"))
+                return true;
+
+        return false;
+}
+
+static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
+{
+        return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1));
+}
+
+
 /*
  * Initialize memory for HCD and xHC (one-time init).
  *
@@ -421,6 +511,12 @@ int xhci_init(struct usb_hcd *hcd)
         retval = xhci_mem_init(xhci, GFP_KERNEL);
         xhci_dbg(xhci, "Finished xhci_init\n");
 
+        /* Initializing Compliance Mode Recovery Data If Needed */
+        if (compliance_mode_recovery_timer_quirk_check()) {
+                xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+                compliance_mode_recovery_timer_init(xhci);
+        }
+
         return retval;
 }
 
@@ -629,6 +725,11 @@ void xhci_stop(struct usb_hcd *hcd)
         del_timer_sync(&xhci->event_ring_timer);
 #endif
 
+        /* Deleting Compliance Mode Recovery Timer */
+        if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+                        (!(xhci_all_ports_seen_u0(xhci))))
+                del_timer_sync(&xhci->comp_mode_recovery_timer);
+
         if (xhci->quirks & XHCI_AMD_PLL_FIX)
                 usb_amd_dev_put();
 
@@ -659,7 +760,7 @@ void xhci_shutdown(struct usb_hcd *hcd)
 {
         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
-        if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
+        if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
                 usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
 
         spin_lock_irq(&xhci->lock);
@@ -806,6 +907,16 @@ int xhci_suspend(struct xhci_hcd *xhci)
         }
         spin_unlock_irq(&xhci->lock);
 
+        /*
+         * Deleting Compliance Mode Recovery Timer because the xHCI Host
+         * is about to be suspended.
+         */
+        if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+                        (!(xhci_all_ports_seen_u0(xhci)))) {
+                del_timer_sync(&xhci->comp_mode_recovery_timer);
+                xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n");
+        }
+
         /* step 5: remove core well power */
         /* synchronize irq when using MSI-X */
         xhci_msix_sync_irqs(xhci);
@@ -938,6 +1049,16 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
                 usb_hcd_resume_root_hub(hcd);
                 usb_hcd_resume_root_hub(xhci->shared_hcd);
         }
+
+        /*
+         * If system is subject to the Quirk, Compliance Mode Timer needs to
+         * be re-initialized Always after a system resume. Ports are subject
+         * to suffer the Compliance Mode issue again. It doesn't matter if
+         * ports have entered previously to U0 before system's suspension.
+         */
+        if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+                compliance_mode_recovery_timer_init(xhci);
+
         return retval;
 }
 #endif  /* CONFIG_PM */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index c713256297a..1a05908c667 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1495,6 +1495,7 @@ struct xhci_hcd {
 #define XHCI_LPM_SUPPORT        (1 << 11)
 #define XHCI_INTEL_HOST         (1 << 12)
 #define XHCI_SPURIOUS_REBOOT    (1 << 13)
+#define XHCI_COMP_MODE_QUIRK    (1 << 14)
         unsigned int            num_active_eps;
         unsigned int            limit_active_eps;
         /* There are two roothubs to keep track of bus suspend info for */
@@ -1511,6 +1512,11 @@ struct xhci_hcd {
         unsigned                sw_lpm_support:1;
         /* support xHCI 1.0 spec USB2 hardware LPM */
         unsigned                hw_lpm_support:1;
+        /* Compliance Mode Recovery Data */
+        struct timer_list       comp_mode_recovery_timer;
+        u32                     port_status_u0;
+/* Compliance Mode Timer Triggered every 2 seconds */
+#define COMP_MODE_RCVRY_MSECS 2000
 };
 
 /* convert between an HCD pointer and the corresponding EHCI_HCD */
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 4bb717d0bd4..1ae378d5fc6 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2049,7 +2049,7 @@ static int musb_urb_enqueue(
          * we only have work to do in the former case.
          */
         spin_lock_irqsave(&musb->lock, flags);
-        if (hep->hcpriv) {
+        if (hep->hcpriv || !next_urb(qh)) {
                 /* some concurrent activity submitted another urb to hep...
                  * odd, rare, error prone, but legal.
                  */
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 57a608584e1..c1be687e00e 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -388,7 +388,7 @@ dma_controller_create(struct musb *musb, void __iomem *base)
         struct platform_device *pdev = to_platform_device(dev);
         int irq = platform_get_irq_byname(pdev, "dma");
 
-        if (irq == 0) {
+        if (irq <= 0) {
                 dev_err(dev, "No DMA interrupt line!\n");
                 return NULL;
         }
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 1a1bd9cf40c..34162544237 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1215,7 +1215,7 @@ static int __devinit tusb_probe(struct platform_device *pdev)
         ret = platform_device_add(musb);
         if (ret) {
                 dev_err(&pdev->dev, "failed to register musb device\n");
-                goto err1;
+                goto err2;
         }
 
         return 0;
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index ecd173032fd..143c4e9e1be 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -818,7 +818,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
             usbhs_pipe_is_dcp(pipe))
                 goto usbhsf_pio_prepare_push;
 
-        if (len % 4) /* 32bit alignment */
+        if (len & 0x7) /* 8byte alignment */
                 goto usbhsf_pio_prepare_push;
 
         if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
@@ -905,7 +905,7 @@ static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done)
         /* use PIO if packet is less than pio_dma_border */
         len = usbhsf_fifo_rcv_len(priv, fifo);
         len = min(pkt->length - pkt->actual, len);
-        if (len % 4) /* 32bit alignment */
+        if (len & 0x7) /* 8byte alignment */
                 goto usbhsf_pio_prepare_pop_unselect;
 
         if (len < usbhs_get_dparam(priv, pio_dma_border))
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5620db6469e..f906b3aec21 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -704,6 +704,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) },
         { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
         { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
         { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
@@ -804,13 +805,32 @@ static struct usb_device_id id_table_combined [] = {
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-        { USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) },
+        { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
+                                        USB_CLASS_VENDOR_SPEC,
+                                        USB_SUBCLASS_VENDOR_SPEC, 0x00) },
         { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
         { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
         { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+        { USB_DEVICE(FTDI_VID, PI_C865_PID) },
+        { USB_DEVICE(FTDI_VID, PI_C857_PID) },
+        { USB_DEVICE(PI_VID, PI_C866_PID) },
+        { USB_DEVICE(PI_VID, PI_C663_PID) },
+        { USB_DEVICE(PI_VID, PI_C725_PID) },
+        { USB_DEVICE(PI_VID, PI_E517_PID) },
+        { USB_DEVICE(PI_VID, PI_C863_PID) },
         { USB_DEVICE(PI_VID, PI_E861_PID) },
+        { USB_DEVICE(PI_VID, PI_C867_PID) },
+        { USB_DEVICE(PI_VID, PI_E609_PID) },
+        { USB_DEVICE(PI_VID, PI_E709_PID) },
+        { USB_DEVICE(PI_VID, PI_100F_PID) },
+        { USB_DEVICE(PI_VID, PI_1011_PID) },
+        { USB_DEVICE(PI_VID, PI_1012_PID) },
+        { USB_DEVICE(PI_VID, PI_1013_PID) },
+        { USB_DEVICE(PI_VID, PI_1014_PID) },
+        { USB_DEVICE(PI_VID, PI_1015_PID) },
+        { USB_DEVICE(PI_VID, PI_1016_PID) },
         { USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
         { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
         { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 5dd96ca6c38..41fe5826100 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -75,6 +75,9 @@
 #define FTDI_OPENDCC_GATEWAY_PID        0xBFDB
 #define FTDI_OPENDCC_GBM_PID    0xBFDC
 
+/* NZR SEM 16+ USB (http://www.nzr.de) */
+#define FTDI_NZR_SEM_USB_PID    0xC1E0  /* NZR SEM-LOG16+ */
+
 /*
  * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
  */
@@ -539,7 +542,10 @@
 /*
  * Microchip Technology, Inc.
  *
- * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by:
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are
+ * used by single function CDC ACM class based firmware demo
+ * applications.  The VID/PID has also been used in firmware
+ * emulating FTDI serial chips by:
  * Hornby Elite - Digital Command Control Console
  * http://www.hornby.com/hornby-dcc/controllers/
  */
@@ -791,8 +797,27 @@
  * Physik Instrumente
  * http://www.physikinstrumente.com/en/products/
  */
+/* These two devices use the VID of FTDI */
+#define PI_C865_PID     0xe0a0  /* PI C-865 Piezomotor Controller */
+#define PI_C857_PID     0xe0a1  /* PI Encoder Trigger Box */
+
 #define PI_VID              0x1a72  /* Vendor ID */
-#define PI_E861_PID         0x1008  /* E-861 piezo controller USB connection */
+#define PI_C866_PID     0x1000  /* PI C-866 Piezomotor Controller */
+#define PI_C663_PID     0x1001  /* PI C-663 Mercury-Step */
+#define PI_C725_PID     0x1002  /* PI C-725 Piezomotor Controller */
+#define PI_E517_PID     0x1005  /* PI E-517 Digital Piezo Controller Operation Module */
+#define PI_C863_PID     0x1007  /* PI C-863 */
+#define PI_E861_PID     0x1008  /* PI E-861 Piezomotor Controller */
+#define PI_C867_PID     0x1009  /* PI C-867 Piezomotor Controller */
+#define PI_E609_PID     0x100D  /* PI E-609 Digital Piezo Controller */
+#define PI_E709_PID     0x100E  /* PI E-709 Digital Piezo Controller */
+#define PI_100F_PID     0x100F  /* PI Digital Piezo Controller */
+#define PI_1011_PID     0x1011  /* PI Digital Piezo Controller */
+#define PI_1012_PID     0x1012  /* PI Motion Controller */
+#define PI_1013_PID     0x1013  /* PI Motion Controller */
+#define PI_1014_PID     0x1014  /* PI Device */
+#define PI_1015_PID     0x1015  /* PI Device */
+#define PI_1016_PID     0x1016  /* PI Digital Servo Module */
 
 /*
  * Kondo Kagaku Co.Ltd.
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index cc40f47ecea..5ce88d1bc6f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -886,8 +886,6 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
           .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff),
-          .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
@@ -1092,6 +1090,10 @@ static const struct usb_device_id option_ids[] = {
          .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
          .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+        { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
+        { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
+        { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
+
         { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
         { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
         { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */