1 files changed, 319 insertions, 0 deletions

diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
new file mode 100644
index 00000000000..958d985f295
--- /dev/null
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -0,0 +1,319 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * Bus Glue for AMD Alchemy Au1xxx
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * Modified for LH7A404 from ohci-sa1111.c
+ *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ * Modified for AMD Alchemy Au1xxx
+ *  by Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/signal.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+#ifndef CONFIG_SOC_AU1200
+
+#define USBH_ENABLE_BE (1<<0)
+#define USBH_ENABLE_C  (1<<1)
+#define USBH_ENABLE_E  (1<<2)
+#define USBH_ENABLE_CE (1<<3)
+#define USBH_ENABLE_RD (1<<4)
+
+#ifdef __LITTLE_ENDIAN
+#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
+#elif defined(__BIG_ENDIAN)
+#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | \
+                          USBH_ENABLE_BE)
+#else
+#error not byte order defined
+#endif
+
+#else   /* Au1200 */
+
+#define USB_HOST_CONFIG    (USB_MSR_BASE + USB_MSR_MCFG)
+#define USB_MCFG_PFEN     (1<<31)
+#define USB_MCFG_RDCOMB   (1<<30)
+#define USB_MCFG_SSDEN    (1<<23)
+#define USB_MCFG_OHCCLKEN (1<<16)
+#ifdef CONFIG_DMA_COHERENT
+#define USB_MCFG_UCAM     (1<<7)
+#else
+#define USB_MCFG_UCAM     (0)
+#endif
+#define USB_MCFG_OBMEN    (1<<1)
+#define USB_MCFG_OMEMEN   (1<<0)
+
+#define USBH_ENABLE_CE    USB_MCFG_OHCCLKEN
+
+#define USBH_ENABLE_INIT  (USB_MCFG_PFEN  | USB_MCFG_RDCOMB     |       \
+                           USBH_ENABLE_CE | USB_MCFG_SSDEN      |       \
+                           USB_MCFG_UCAM  |                             \
+                           USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
+
+#define USBH_DISABLE      (USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
+
+#endif  /* Au1200 */
+
+extern int usb_disabled(void);
+
+static void au1xxx_start_ohc(void)
+{
+        /* enable host controller */
+#ifndef CONFIG_SOC_AU1200
+        au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
+        au_sync();
+        udelay(1000);
+
+        au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
+        au_sync();
+        udelay(1000);
+
+        /* wait for reset complete (read register twice; see au1500 errata) */
+        while (au_readl(USB_HOST_CONFIG),
+                !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
+                udelay(1000);
+
+#else   /* Au1200 */
+        au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
+        au_sync();
+        udelay(1000);
+
+        au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
+        au_sync();
+        udelay(2000);
+#endif  /* Au1200 */
+}
+
+static void au1xxx_stop_ohc(void)
+{
+#ifdef CONFIG_SOC_AU1200
+        /* Disable mem */
+        au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
+        au_sync();
+        udelay(1000);
+#endif
+        /* Disable clock */
+        au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
+        au_sync();
+}
+
+static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd)
+{
+        struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+        int ret;
+
+        ohci_dbg(ohci, "ohci_au1xxx_start, ohci:%p", ohci);
+
+        if ((ret = ohci_init(ohci)) < 0)
+                return ret;
+
+        if ((ret = ohci_run(ohci)) < 0) {
+                err ("can't start %s", hcd->self.bus_name);
+                ohci_stop(hcd);
+                return ret;
+        }
+
+        return 0;
+}
+
+static const struct hc_driver ohci_au1xxx_hc_driver = {
+        .description =          hcd_name,
+        .product_desc =         "Au1xxx OHCI",
+        .hcd_priv_size =        sizeof(struct ohci_hcd),
+
+        /*
+         * generic hardware linkage
+         */
+        .irq =                  ohci_irq,
+        .flags =                HCD_USB11 | HCD_MEMORY,
+
+        /*
+         * basic lifecycle operations
+         */
+        .start =                ohci_au1xxx_start,
+        .stop =                 ohci_stop,
+        .shutdown =             ohci_shutdown,
+
+        /*
+         * managing i/o requests and associated device resources
+         */
+        .urb_enqueue =          ohci_urb_enqueue,
+        .urb_dequeue =          ohci_urb_dequeue,
+        .endpoint_disable =     ohci_endpoint_disable,
+
+        /*
+         * scheduling support
+         */
+        .get_frame_number =     ohci_get_frame,
+
+        /*
+         * root hub support
+         */
+        .hub_status_data =      ohci_hub_status_data,
+        .hub_control =          ohci_hub_control,
+#ifdef  CONFIG_PM
+        .bus_suspend =          ohci_bus_suspend,
+        .bus_resume =           ohci_bus_resume,
+#endif
+        .start_port_reset =     ohci_start_port_reset,
+};
+
+static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
+{
+        int ret;
+        struct usb_hcd *hcd;
+
+        if (usb_disabled())
+                return -ENODEV;
+
+#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
+        /* Au1200 AB USB does not support coherent memory */
+        if (!(read_c0_prid() & 0xff)) {
+                printk(KERN_INFO "%s: this is chip revision AB !!\n",
+                        pdev->name);
+                printk(KERN_INFO "%s: update your board or re-configure "
+                                 "the kernel\n", pdev->name);
+                return -ENODEV;
+        }
+#endif
+
+        if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+                pr_debug("resource[1] is not IORESOURCE_IRQ\n");
+                return -ENOMEM;
+        }
+
+        hcd = usb_create_hcd(&ohci_au1xxx_hc_driver, &pdev->dev, "au1xxx");
+        if (!hcd)
+                return -ENOMEM;
+
+        hcd->rsrc_start = pdev->resource[0].start;
+        hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+
+        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+                pr_debug("request_mem_region failed\n");
+                ret = -EBUSY;
+                goto err1;
+        }
+
+        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+        if (!hcd->regs) {
+                pr_debug("ioremap failed\n");
+                ret = -ENOMEM;
+                goto err2;
+        }
+
+        au1xxx_start_ohc();
+        ohci_hcd_init(hcd_to_ohci(hcd));
+
+        ret = usb_add_hcd(hcd, pdev->resource[1].start,
+                          IRQF_DISABLED | IRQF_SHARED);
+        if (ret == 0) {
+                platform_set_drvdata(pdev, hcd);
+                return ret;
+        }
+
+        au1xxx_stop_ohc();
+        iounmap(hcd->regs);
+err2:
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+        usb_put_hcd(hcd);
+        return ret;
+}
+
+static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
+{
+        struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+        usb_remove_hcd(hcd);
+        au1xxx_stop_ohc();
+        iounmap(hcd->regs);
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+        usb_put_hcd(hcd);
+        platform_set_drvdata(pdev, NULL);
+
+        return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
+{
+        struct usb_hcd *hcd = dev_get_drvdata(dev);
+        struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+        unsigned long flags;
+        int rc;
+
+        rc = 0;
+
+        /* Root hub was already suspended. Disable irq emission and
+         * mark HW unaccessible, bail out if RH has been resumed. Use
+         * the spinlock to properly synchronize with possible pending
+         * RH suspend or resume activity.
+         *
+         * This is still racy as hcd->state is manipulated outside of
+         * any locks =P But that will be a different fix.
+         */
+        spin_lock_irqsave(&ohci->lock, flags);
+        if (hcd->state != HC_STATE_SUSPENDED) {
+                rc = -EINVAL;
+                goto bail;
+        }
+        ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+        (void)ohci_readl(ohci, &ohci->regs->intrdisable);
+
+        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+        au1xxx_stop_ohc();
+bail:
+        spin_unlock_irqrestore(&ohci->lock, flags);
+
+        return rc;
+}
+
+static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
+{
+        struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+        au1xxx_start_ohc();
+
+        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+        ohci_finish_controller_resume(hcd);
+
+        return 0;
+}
+
+static const struct dev_pm_ops au1xxx_ohci_pmops = {
+        .suspend        = ohci_hcd_au1xxx_drv_suspend,
+        .resume         = ohci_hcd_au1xxx_drv_resume,
+};
+
+#define AU1XXX_OHCI_PMOPS &au1xxx_ohci_pmops
+
+#else
+#define AU1XXX_OHCI_PMOPS NULL
+#endif
+
+static struct platform_driver ohci_hcd_au1xxx_driver = {
+        .probe          = ohci_hcd_au1xxx_drv_probe,
+        .remove         = ohci_hcd_au1xxx_drv_remove,
+        .shutdown       = usb_hcd_platform_shutdown,
+        .driver         = {
+                .name   = "au1xxx-ohci",
+                .owner  = THIS_MODULE,
+                .pm     = AU1XXX_OHCI_PMOPS,
+        },
+};
+
+MODULE_ALIAS("platform:au1xxx-ohci");