14 files changed, 99 insertions, 34 deletions

diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index f2dfec82faf..7f50999eebc 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -1819,6 +1819,8 @@ static void serial8250_backup_timeout(unsigned long data)
         unsigned int iir, ier = 0, lsr;
         unsigned long flags;
 
+        spin_lock_irqsave(&up->port.lock, flags);
+
         /*
          * Must disable interrupts or else we risk racing with the interrupt
          * based handler.
@@ -1836,10 +1838,8 @@ static void serial8250_backup_timeout(unsigned long data)
          * the "Diva" UART used on the management processor on many HP
          * ia64 and parisc boxes.
          */
-        spin_lock_irqsave(&up->port.lock, flags);
         lsr = serial_in(up, UART_LSR);
         up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
-        spin_unlock_irqrestore(&up->port.lock, flags);
         if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
             (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
             (lsr & UART_LSR_THRE)) {
@@ -1848,11 +1848,13 @@ static void serial8250_backup_timeout(unsigned long data)
         }
 
         if (!(iir & UART_IIR_NO_INT))
-                serial8250_handle_port(up);
+                transmit_chars(up);
 
         if (is_real_interrupt(up->port.irq))
                 serial_out(up, UART_IER, ier);
 
+        spin_unlock_irqrestore(&up->port.lock, flags);
+
         /* Standard timer interval plus 0.2s to keep the port running */
         mod_timer(&up->timer,
                 jiffies + uart_poll_timeout(&up->port) + HZ / 5);
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 6b887d90a20..3abeca2a2a1 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -1599,11 +1599,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
                 .device         = 0x800D,
                 .init           = pci_eg20t_init,
         },
-        {
-                .vendor         = 0x10DB,
-                .device         = 0x800D,
-                .init           = pci_eg20t_init,
-        },
         /*
          * Cronyx Omega PCI (PLX-chip based)
          */
@@ -4021,7 +4016,7 @@ static struct pci_device_id serial_pci_tbl[] = {
                 0, 0, pbn_NETMOS9900_2s_115200 },
 
         /*
-         * Best Connectivity PCI Multi I/O cards
+         * Best Connectivity and Rosewill PCI Multi I/O cards
          */
 
         {       PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
@@ -4029,6 +4024,10 @@ static struct pci_device_id serial_pci_tbl[] = {
                 0, 0, pbn_b0_1_115200 },
 
         {       PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+                0xA000, 0x3002,
+                0, 0, pbn_b0_bt_2_115200 },
+
+        {       PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
                 0xA000, 0x3004,
                 0, 0, pbn_b0_bt_4_115200 },
         /* Intel CE4100 */
diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250_pnp.c
index fc301f6722e..a2f236510ff 100644
--- a/drivers/tty/serial/8250_pnp.c
+++ b/drivers/tty/serial/8250_pnp.c
@@ -109,6 +109,9 @@ static const struct pnp_device_id pnp_dev_table[] = {
         /* IBM */
         /* IBM Thinkpad 701 Internal Modem Voice */
         {       "IBM0033",              0       },
+        /* Intermec */
+        /* Intermec CV60 touchscreen port */
+        {       "PNP4972",              0       },
         /* Intertex */
         /* Intertex 28k8 33k6 Voice EXT PnP */
         {       "IXDC801",              0       },
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index af9b7814965..b922f5d2e61 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1609,9 +1609,11 @@ static struct console atmel_console = {
 static int __init atmel_console_init(void)
 {
         if (atmel_default_console_device) {
-                add_preferred_console(ATMEL_DEVICENAME,
-                                      atmel_default_console_device->id, NULL);
-                atmel_init_port(&atmel_ports[atmel_default_console_device->id],
+                struct atmel_uart_data *pdata =
+                        atmel_default_console_device->dev.platform_data;
+
+                add_preferred_console(ATMEL_DEVICENAME, pdata->num, NULL);
+                atmel_init_port(&atmel_ports[pdata->num],
                                 atmel_default_console_device);
                 register_console(&atmel_console);
         }
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 225123b37f1..58be715913c 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -4450,7 +4450,7 @@ static int __init rs_init(void)
 
 #if defined(CONFIG_ETRAX_RS485)
 #if defined(CONFIG_ETRAX_RS485_ON_PA)
-        if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit,
+        if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit,
                         rs485_pa_bit)) {
                 printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
                         "RS485 pin\n");
@@ -4459,7 +4459,7 @@ static int __init rs_init(void)
         }
 #endif
 #if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-        if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit,
+        if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit,
                         rs485_port_g_bit)) {
                 printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
                         "RS485 pin\n");
diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c
index a1fe304f2f5..d73aadd7a9a 100644
--- a/drivers/tty/serial/max3107-aava.c
+++ b/drivers/tty/serial/max3107-aava.c
@@ -340,5 +340,5 @@ module_exit(max3107_exit);
 
 MODULE_DESCRIPTION("MAX3107 driver");
 MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("aava-max3107-spi");
+MODULE_ALIAS("spi:aava-max3107");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
index 750b4f62731..a8164601c0e 100644
--- a/drivers/tty/serial/max3107.c
+++ b/drivers/tty/serial/max3107.c
@@ -1209,5 +1209,5 @@ module_exit(max3107_exit);
 
 MODULE_DESCRIPTION("MAX3107 driver");
 MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("max3107-spi");
+MODULE_ALIAS("spi:max3107");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index a764bf99743..23bc743f2a2 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -917,4 +917,4 @@ module_init(serial_m3110_init);
 module_exit(serial_m3110_exit);
 
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("max3110-uart");
+MODULE_ALIAS("spi:max3110-uart");
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index c37df8d0fa2..5e713d3ef1f 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -806,8 +806,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 
         serial_omap_set_mctrl(&up->port, up->port.mctrl);
         /* Software Flow Control Configuration */
-        if (termios->c_iflag & (IXON | IXOFF))
-                serial_omap_configure_xonxoff(up, termios);
+        serial_omap_configure_xonxoff(up, termios);
 
         spin_unlock_irqrestore(&up->port.lock, flags);
         dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 846dfcd3ce0..b46218d679e 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -598,7 +598,8 @@ static void pch_request_dma(struct uart_port *port)
         dma_cap_zero(mask);
         dma_cap_set(DMA_SLAVE, mask);
 
-        dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev
+        dma_dev = pci_get_bus_and_slot(priv->pdev->bus->number,
+                                       PCI_DEVFN(0xa, 0)); /* Get DMA's dev
                                                                 information */
         /* Set Tx DMA */
         param = &priv->param_tx;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index afc62942315..6edafb5ace1 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1225,15 +1225,19 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
         .suspend = s3c24xx_serial_suspend,
         .resume = s3c24xx_serial_resume,
 };
+#define SERIAL_SAMSUNG_PM_OPS   (&s3c24xx_serial_pm_ops)
+
 #else /* !CONFIG_PM_SLEEP */
-#define s3c24xx_serial_pm_ops   NULL
+
+#define SERIAL_SAMSUNG_PM_OPS   NULL
 #endif /* CONFIG_PM_SLEEP */
 
 int s3c24xx_serial_init(struct platform_driver *drv,
                         struct s3c24xx_uart_info *info)
 {
         dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
-        drv->driver.pm = &s3c24xx_serial_pm_ops;
+
+        drv->driver.pm = SERIAL_SAMSUNG_PM_OPS;
 
         return platform_driver_register(drv);
 }
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index db7912cb7ae..a3efbea5dbb 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -200,6 +200,11 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, int in
                 clear_bit(TTY_IO_ERROR, &tty->flags);
         }
 
+        /*
+         * This is to allow setserial on this port. People may want to set
+         * port/irq/type and then reconfigure the port properly if it failed
+         * now.
+         */
         if (retval && capable(CAP_SYS_ADMIN))
                 retval = 0;
 
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 2ec57b2fb27..5ea6ec3442e 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -47,6 +47,7 @@
 #include <linux/ctype.h>
 #include <linux/err.h>
 #include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 
@@ -95,6 +96,12 @@ struct sci_port {
 #endif
 
         struct notifier_block           freq_transition;
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+        unsigned short saved_smr;
+        unsigned short saved_fcr;
+        unsigned char saved_brr;
+#endif
 };
 
 /* Function prototypes */
@@ -1076,7 +1083,7 @@ static unsigned int sci_get_mctrl(struct uart_port *port)
         /* This routine is used for getting signals of: DTR, DCD, DSR, RI,
            and CTS/RTS */
 
-        return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
+        return TIOCM_DTR | TIOCM_RTS | TIOCM_CTS | TIOCM_DSR;
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
@@ -1633,11 +1640,25 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
         return ((freq + 16 * bps) / (32 * bps) - 1);
 }
 
+static void sci_reset(struct uart_port *port)
+{
+        unsigned int status;
+
+        do {
+                status = sci_in(port, SCxSR);
+        } while (!(status & SCxSR_TEND(port)));
+
+        sci_out(port, SCSCR, 0x00);     /* TE=0, RE=0, CKE1=0 */
+
+        if (port->type != PORT_SCI)
+                sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+}
+
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
                             struct ktermios *old)
 {
         struct sci_port *s = to_sci_port(port);
-        unsigned int status, baud, smr_val, max_baud;
+        unsigned int baud, smr_val, max_baud;
         int t = -1;
         u16 scfcr = 0;
 
@@ -1657,14 +1678,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
         sci_port_enable(s);
 
-        do {
-                status = sci_in(port, SCxSR);
-        } while (!(status & SCxSR_TEND(port)));
-
-        sci_out(port, SCSCR, 0x00);     /* TE=0, RE=0, CKE1=0 */
-
-        if (port->type != PORT_SCI)
-                sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST);
+        sci_reset(port);
 
         smr_val = sci_in(port, SCSMR) & 3;
 
@@ -1913,6 +1927,7 @@ static int __devinit sci_init_single(struct platform_device *dev,
 
                 port->dev = &dev->dev;
 
+                pm_runtime_irq_safe(&dev->dev);
                 pm_runtime_enable(&dev->dev);
         }
 
@@ -2036,7 +2051,8 @@ static int __devinit serial_console_setup(struct console *co, char *options)
         if (options)
                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 
-        /* TODO: disable clock */
+        sci_port_disable(sci_port);
+
         return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
@@ -2079,6 +2095,36 @@ static int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
         return 0;
 }
 
+#define uart_console(port)      ((port)->cons->index == (port)->line)
+
+static int sci_runtime_suspend(struct device *dev)
+{
+        struct sci_port *sci_port = dev_get_drvdata(dev);
+        struct uart_port *port = &sci_port->port;
+
+        if (uart_console(port)) {
+                sci_port->saved_smr = sci_in(port, SCSMR);
+                sci_port->saved_brr = sci_in(port, SCBRR);
+                sci_port->saved_fcr = sci_in(port, SCFCR);
+        }
+        return 0;
+}
+
+static int sci_runtime_resume(struct device *dev)
+{
+        struct sci_port *sci_port = dev_get_drvdata(dev);
+        struct uart_port *port = &sci_port->port;
+
+        if (uart_console(port)) {
+                sci_reset(port);
+                sci_out(port, SCSMR, sci_port->saved_smr);
+                sci_out(port, SCBRR, sci_port->saved_brr);
+                sci_out(port, SCFCR, sci_port->saved_fcr);
+                sci_out(port, SCSCR, sci_port->cfg->scscr);
+        }
+        return 0;
+}
+
 #define SCI_CONSOLE     (&serial_console)
 
 #else
@@ -2088,6 +2134,8 @@ static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
 }
 
 #define SCI_CONSOLE     NULL
+#define sci_runtime_suspend     NULL
+#define sci_runtime_resume      NULL
 
 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
@@ -2203,6 +2251,8 @@ static int sci_resume(struct device *dev)
 }
 
 static const struct dev_pm_ops sci_dev_pm_ops = {
+        .runtime_suspend = sci_runtime_suspend,
+        .runtime_resume = sci_runtime_resume,
         .suspend        = sci_suspend,
         .resume         = sci_resume,
 };
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index c327218cad4..9af9f0879a2 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -235,7 +235,7 @@ static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port)
                 return qe_port->bd_virt + (addr - qe_port->bd_dma_addr);
 
         /* something nasty happened */
-        printk(KERN_ERR "%s: addr=%x\n", __func__, addr);
+        printk(KERN_ERR "%s: addr=%llx\n", __func__, (u64)addr);
         BUG();
         return NULL;
 }