1 files changed, 85 insertions, 19 deletions

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index e3645e8f348..86d1bdcbf2d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -302,6 +302,7 @@ int
 lpfc_config_port_post(struct lpfc_hba *phba)
 {
         struct lpfc_vport *vport = phba->pport;
+        struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
         LPFC_MBOXQ_t *pmb;
         MAILBOX_t *mb;
         struct lpfc_dmabuf *mp;
@@ -359,6 +360,11 @@ lpfc_config_port_post(struct lpfc_hba *phba)
                sizeof (struct lpfc_name));
         memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
                sizeof (struct lpfc_name));
+
+        /* Update the fc_host data structures with new wwn. */
+        fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+        fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
         /* If no serial number in VPD data, use low 6 bytes of WWNN */
         /* This should be consolidated into parse_vpd ? - mr */
         if (phba->SerialNumber[0] == 0) {
@@ -598,8 +604,6 @@ lpfc_hba_down_post(struct lpfc_hba *phba)
         struct lpfc_sli *psli = &phba->sli;
         struct lpfc_sli_ring *pring;
         struct lpfc_dmabuf *mp, *next_mp;
-        struct lpfc_iocbq *iocb;
-        IOCB_t *cmd = NULL;
         LIST_HEAD(completions);
         int i;
 
@@ -627,20 +631,9 @@ lpfc_hba_down_post(struct lpfc_hba *phba)
                 pring->txcmplq_cnt = 0;
                 spin_unlock_irq(&phba->hbalock);
 
-                while (!list_empty(&completions)) {
-                        iocb = list_get_first(&completions, struct lpfc_iocbq,
-                                list);
-                        cmd = &iocb->iocb;
-                        list_del_init(&iocb->list);
-
-                        if (!iocb->iocb_cmpl)
-                                lpfc_sli_release_iocbq(phba, iocb);
-                        else {
-                                cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-                                cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-                                (iocb->iocb_cmpl) (phba, iocb, iocb);
-                        }
-                }
+                /* Cancel all the IOCBs from the completions list */
+                lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+                                      IOERR_SLI_ABORTED);
 
                 lpfc_sli_abort_iocb_ring(phba, pring);
                 spin_lock_irq(&phba->hbalock);
@@ -856,6 +849,72 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the deferred HBA hardware error
+ * conditions. This type of error is indicated by HBA by setting ER1
+ * and another ER bit in the host status register. The driver will
+ * wait until the ER1 bit clears before handling the error condition.
+ **/
+static void
+lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
+{
+        uint32_t old_host_status = phba->work_hs;
+        struct lpfc_sli_ring  *pring;
+        struct lpfc_sli *psli = &phba->sli;
+
+        lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+                "0479 Deferred Adapter Hardware Error "
+                "Data: x%x x%x x%x\n",
+                phba->work_hs,
+                phba->work_status[0], phba->work_status[1]);
+
+        spin_lock_irq(&phba->hbalock);
+        psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+        spin_unlock_irq(&phba->hbalock);
+
+
+        /*
+         * Firmware stops when it triggred erratt. That could cause the I/Os
+         * dropped by the firmware. Error iocb (I/O) on txcmplq and let the
+         * SCSI layer retry it after re-establishing link.
+         */
+        pring = &psli->ring[psli->fcp_ring];
+        lpfc_sli_abort_iocb_ring(phba, pring);
+
+        /*
+         * There was a firmware error. Take the hba offline and then
+         * attempt to restart it.
+         */
+        lpfc_offline_prep(phba);
+        lpfc_offline(phba);
+
+        /* Wait for the ER1 bit to clear.*/
+        while (phba->work_hs & HS_FFER1) {
+                msleep(100);
+                phba->work_hs = readl(phba->HSregaddr);
+                /* If driver is unloading let the worker thread continue */
+                if (phba->pport->load_flag & FC_UNLOADING) {
+                        phba->work_hs = 0;
+                        break;
+                }
+        }
+
+        /*
+         * This is to ptrotect against a race condition in which
+         * first write to the host attention register clear the
+         * host status register.
+         */
+        if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
+                phba->work_hs = old_host_status & ~HS_FFER1;
+
+        phba->hba_flag &= ~DEFER_ERATT;
+        phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
+        phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
+}
+
+/**
  * lpfc_handle_eratt - The HBA hardware error handler
  * @phba: pointer to lpfc hba data structure.
  *
@@ -894,6 +953,9 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
                                   (char *) &board_event,
                                   LPFC_NL_VENDOR_ID);
 
+        if (phba->hba_flag & DEFER_ERATT)
+                lpfc_handle_deferred_eratt(phba);
+
         if (phba->work_hs & HS_FFER6) {
                 /* Re-establishing Link */
                 lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
@@ -1321,7 +1383,8 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
                 m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
                 break;
         case PCI_DEVICE_ID_ZEPHYR_DCSP:
-                m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"};
+                m = (typeof(m)){"LP2105", max_speed, "PCIe"};
+                GE = 1;
                 break;
         case PCI_DEVICE_ID_ZMID:
                 m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
@@ -3032,8 +3095,6 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 
         lpfc_free_sysfs_attr(vport);
 
-        kthread_stop(phba->worker_thread);
-
         /* Release all the vports against this physical port */
         vports = lpfc_create_vport_work_array(phba);
         if (vports != NULL)
@@ -3051,7 +3112,12 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
          * clears the rings, discards all mailbox commands, and resets
          * the HBA.
          */
+
+        /* HBA interrupt will be diabled after this call */
         lpfc_sli_hba_down(phba);
+        /* Stop kthread signal shall trigger work_done one more time */
+        kthread_stop(phba->worker_thread);
+        /* Final cleanup of txcmplq and reset the HBA */
         lpfc_sli_brdrestart(phba);
 
         lpfc_stop_phba_timers(phba);