diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-core.c')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.c | 1938 |
1 files changed, 1938 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c new file mode 100644 index 00000000000..d652778253a --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-core.c | |||
@@ -0,0 +1,1938 @@ | |||
1 | /****************************************************************************** | ||
2 | * | ||
3 | * GPL LICENSE SUMMARY | ||
4 | * | ||
5 | * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify | ||
8 | * it under the terms of version 2 of the GNU General Public License as | ||
9 | * published by the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, but | ||
12 | * WITHOUT ANY WARRANTY; without even the implied warranty of | ||
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | ||
14 | * General Public License for more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License | ||
17 | * along with this program; if not, write to the Free Software | ||
18 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, | ||
19 | * USA | ||
20 | * | ||
21 | * The full GNU General Public License is included in this distribution | ||
22 | * in the file called LICENSE.GPL. | ||
23 | * | ||
24 | * Contact Information: | ||
25 | * Intel Linux Wireless <ilw@linux.intel.com> | ||
26 | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | ||
27 | *****************************************************************************/ | ||
28 | |||
29 | #include <linux/kernel.h> | ||
30 | #include <linux/module.h> | ||
31 | #include <linux/etherdevice.h> | ||
32 | #include <linux/sched.h> | ||
33 | #include <linux/slab.h> | ||
34 | #include <net/mac80211.h> | ||
35 | |||
36 | #include "iwl-eeprom.h" | ||
37 | #include "iwl-dev.h" /* FIXME: remove */ | ||
38 | #include "iwl-debug.h" | ||
39 | #include "iwl-core.h" | ||
40 | #include "iwl-io.h" | ||
41 | #include "iwl-power.h" | ||
42 | #include "iwl-sta.h" | ||
43 | #include "iwl-helpers.h" | ||
44 | #include "iwl-agn.h" | ||
45 | #include "iwl-trans.h" | ||
46 | |||
47 | u32 iwl_debug_level; | ||
48 | |||
49 | const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; | ||
50 | |||
51 | #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */ | ||
52 | #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */ | ||
53 | static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, | ||
54 | struct ieee80211_sta_ht_cap *ht_info, | ||
55 | enum ieee80211_band band) | ||
56 | { | ||
57 | u16 max_bit_rate = 0; | ||
58 | u8 rx_chains_num = priv->hw_params.rx_chains_num; | ||
59 | u8 tx_chains_num = priv->hw_params.tx_chains_num; | ||
60 | |||
61 | ht_info->cap = 0; | ||
62 | memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); | ||
63 | |||
64 | ht_info->ht_supported = true; | ||
65 | |||
66 | if (priv->cfg->ht_params && | ||
67 | priv->cfg->ht_params->ht_greenfield_support) | ||
68 | ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD; | ||
69 | ht_info->cap |= IEEE80211_HT_CAP_SGI_20; | ||
70 | max_bit_rate = MAX_BIT_RATE_20_MHZ; | ||
71 | if (priv->hw_params.ht40_channel & BIT(band)) { | ||
72 | ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; | ||
73 | ht_info->cap |= IEEE80211_HT_CAP_SGI_40; | ||
74 | ht_info->mcs.rx_mask[4] = 0x01; | ||
75 | max_bit_rate = MAX_BIT_RATE_40_MHZ; | ||
76 | } | ||
77 | |||
78 | if (iwlagn_mod_params.amsdu_size_8K) | ||
79 | ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU; | ||
80 | |||
81 | ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF; | ||
82 | if (priv->cfg->bt_params && priv->cfg->bt_params->ampdu_factor) | ||
83 | ht_info->ampdu_factor = priv->cfg->bt_params->ampdu_factor; | ||
84 | ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF; | ||
85 | if (priv->cfg->bt_params && priv->cfg->bt_params->ampdu_density) | ||
86 | ht_info->ampdu_density = priv->cfg->bt_params->ampdu_density; | ||
87 | |||
88 | ht_info->mcs.rx_mask[0] = 0xFF; | ||
89 | if (rx_chains_num >= 2) | ||
90 | ht_info->mcs.rx_mask[1] = 0xFF; | ||
91 | if (rx_chains_num >= 3) | ||
92 | ht_info->mcs.rx_mask[2] = 0xFF; | ||
93 | |||
94 | /* Highest supported Rx data rate */ | ||
95 | max_bit_rate *= rx_chains_num; | ||
96 | WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK); | ||
97 | ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate); | ||
98 | |||
99 | /* Tx MCS capabilities */ | ||
100 | ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; | ||
101 | if (tx_chains_num != rx_chains_num) { | ||
102 | ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF; | ||
103 | ht_info->mcs.tx_params |= ((tx_chains_num - 1) << | ||
104 | IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); | ||
105 | } | ||
106 | } | ||
107 | |||
108 | /** | ||
109 | * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom | ||
110 | */ | ||
111 | int iwlcore_init_geos(struct iwl_priv *priv) | ||
112 | { | ||
113 | struct iwl_channel_info *ch; | ||
114 | struct ieee80211_supported_band *sband; | ||
115 | struct ieee80211_channel *channels; | ||
116 | struct ieee80211_channel *geo_ch; | ||
117 | struct ieee80211_rate *rates; | ||
118 | int i = 0; | ||
119 | s8 max_tx_power = IWLAGN_TX_POWER_TARGET_POWER_MIN; | ||
120 | |||
121 | if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates || | ||
122 | priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) { | ||
123 | IWL_DEBUG_INFO(priv, "Geography modes already initialized.\n"); | ||
124 | set_bit(STATUS_GEO_CONFIGURED, &priv->status); | ||
125 | return 0; | ||
126 | } | ||
127 | |||
128 | channels = kzalloc(sizeof(struct ieee80211_channel) * | ||
129 | priv->channel_count, GFP_KERNEL); | ||
130 | if (!channels) | ||
131 | return -ENOMEM; | ||
132 | |||
133 | rates = kzalloc((sizeof(struct ieee80211_rate) * IWL_RATE_COUNT_LEGACY), | ||
134 | GFP_KERNEL); | ||
135 | if (!rates) { | ||
136 | kfree(channels); | ||
137 | return -ENOMEM; | ||
138 | } | ||
139 | |||
140 | /* 5.2GHz channels start after the 2.4GHz channels */ | ||
141 | sband = &priv->bands[IEEE80211_BAND_5GHZ]; | ||
142 | sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)]; | ||
143 | /* just OFDM */ | ||
144 | sband->bitrates = &rates[IWL_FIRST_OFDM_RATE]; | ||
145 | sband->n_bitrates = IWL_RATE_COUNT_LEGACY - IWL_FIRST_OFDM_RATE; | ||
146 | |||
147 | if (priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE) | ||
148 | iwlcore_init_ht_hw_capab(priv, &sband->ht_cap, | ||
149 | IEEE80211_BAND_5GHZ); | ||
150 | |||
151 | sband = &priv->bands[IEEE80211_BAND_2GHZ]; | ||
152 | sband->channels = channels; | ||
153 | /* OFDM & CCK */ | ||
154 | sband->bitrates = rates; | ||
155 | sband->n_bitrates = IWL_RATE_COUNT_LEGACY; | ||
156 | |||
157 | if (priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE) | ||
158 | iwlcore_init_ht_hw_capab(priv, &sband->ht_cap, | ||
159 | IEEE80211_BAND_2GHZ); | ||
160 | |||
161 | priv->ieee_channels = channels; | ||
162 | priv->ieee_rates = rates; | ||
163 | |||
164 | for (i = 0; i < priv->channel_count; i++) { | ||
165 | ch = &priv->channel_info[i]; | ||
166 | |||
167 | /* FIXME: might be removed if scan is OK */ | ||
168 | if (!is_channel_valid(ch)) | ||
169 | continue; | ||
170 | |||
171 | sband = &priv->bands[ch->band]; | ||
172 | |||
173 | geo_ch = &sband->channels[sband->n_channels++]; | ||
174 | |||
175 | geo_ch->center_freq = | ||
176 | ieee80211_channel_to_frequency(ch->channel, ch->band); | ||
177 | geo_ch->max_power = ch->max_power_avg; | ||
178 | geo_ch->max_antenna_gain = 0xff; | ||
179 | geo_ch->hw_value = ch->channel; | ||
180 | |||
181 | if (is_channel_valid(ch)) { | ||
182 | if (!(ch->flags & EEPROM_CHANNEL_IBSS)) | ||
183 | geo_ch->flags |= IEEE80211_CHAN_NO_IBSS; | ||
184 | |||
185 | if (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) | ||
186 | geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN; | ||
187 | |||
188 | if (ch->flags & EEPROM_CHANNEL_RADAR) | ||
189 | geo_ch->flags |= IEEE80211_CHAN_RADAR; | ||
190 | |||
191 | geo_ch->flags |= ch->ht40_extension_channel; | ||
192 | |||
193 | if (ch->max_power_avg > max_tx_power) | ||
194 | max_tx_power = ch->max_power_avg; | ||
195 | } else { | ||
196 | geo_ch->flags |= IEEE80211_CHAN_DISABLED; | ||
197 | } | ||
198 | |||
199 | IWL_DEBUG_INFO(priv, "Channel %d Freq=%d[%sGHz] %s flag=0x%X\n", | ||
200 | ch->channel, geo_ch->center_freq, | ||
201 | is_channel_a_band(ch) ? "5.2" : "2.4", | ||
202 | geo_ch->flags & IEEE80211_CHAN_DISABLED ? | ||
203 | "restricted" : "valid", | ||
204 | geo_ch->flags); | ||
205 | } | ||
206 | |||
207 | priv->tx_power_device_lmt = max_tx_power; | ||
208 | priv->tx_power_user_lmt = max_tx_power; | ||
209 | priv->tx_power_next = max_tx_power; | ||
210 | |||
211 | if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) && | ||
212 | priv->cfg->sku & EEPROM_SKU_CAP_BAND_52GHZ) { | ||
213 | char buf[32]; | ||
214 | bus_get_hw_id(priv->bus, buf, sizeof(buf)); | ||
215 | IWL_INFO(priv, "Incorrectly detected BG card as ABG. " | ||
216 | "Please send your %s to maintainer.\n", buf); | ||
217 | priv->cfg->sku &= ~EEPROM_SKU_CAP_BAND_52GHZ; | ||
218 | } | ||
219 | |||
220 | IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n", | ||
221 | priv->bands[IEEE80211_BAND_2GHZ].n_channels, | ||
222 | priv->bands[IEEE80211_BAND_5GHZ].n_channels); | ||
223 | |||
224 | set_bit(STATUS_GEO_CONFIGURED, &priv->status); | ||
225 | |||
226 | return 0; | ||
227 | } | ||
228 | |||
229 | /* | ||
230 | * iwlcore_free_geos - undo allocations in iwlcore_init_geos | ||
231 | */ | ||
232 | void iwlcore_free_geos(struct iwl_priv *priv) | ||
233 | { | ||
234 | kfree(priv->ieee_channels); | ||
235 | kfree(priv->ieee_rates); | ||
236 | clear_bit(STATUS_GEO_CONFIGURED, &priv->status); | ||
237 | } | ||
238 | |||
239 | static bool iwl_is_channel_extension(struct iwl_priv *priv, | ||
240 | enum ieee80211_band band, | ||
241 | u16 channel, u8 extension_chan_offset) | ||
242 | { | ||
243 | const struct iwl_channel_info *ch_info; | ||
244 | |||
245 | ch_info = iwl_get_channel_info(priv, band, channel); | ||
246 | if (!is_channel_valid(ch_info)) | ||
247 | return false; | ||
248 | |||
249 | if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE) | ||
250 | return !(ch_info->ht40_extension_channel & | ||
251 | IEEE80211_CHAN_NO_HT40PLUS); | ||
252 | else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW) | ||
253 | return !(ch_info->ht40_extension_channel & | ||
254 | IEEE80211_CHAN_NO_HT40MINUS); | ||
255 | |||
256 | return false; | ||
257 | } | ||
258 | |||
259 | bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, | ||
260 | struct iwl_rxon_context *ctx, | ||
261 | struct ieee80211_sta_ht_cap *ht_cap) | ||
262 | { | ||
263 | if (!ctx->ht.enabled || !ctx->ht.is_40mhz) | ||
264 | return false; | ||
265 | |||
266 | /* | ||
267 | * We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40 | ||
268 | * the bit will not set if it is pure 40MHz case | ||
269 | */ | ||
270 | if (ht_cap && !ht_cap->ht_supported) | ||
271 | return false; | ||
272 | |||
273 | #ifdef CONFIG_IWLWIFI_DEBUGFS | ||
274 | if (priv->disable_ht40) | ||
275 | return false; | ||
276 | #endif | ||
277 | |||
278 | return iwl_is_channel_extension(priv, priv->band, | ||
279 | le16_to_cpu(ctx->staging.channel), | ||
280 | ctx->ht.extension_chan_offset); | ||
281 | } | ||
282 | |||
283 | static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val) | ||
284 | { | ||
285 | u16 new_val; | ||
286 | u16 beacon_factor; | ||
287 | |||
288 | /* | ||
289 | * If mac80211 hasn't given us a beacon interval, program | ||
290 | * the default into the device (not checking this here | ||
291 | * would cause the adjustment below to return the maximum | ||
292 | * value, which may break PAN.) | ||
293 | */ | ||
294 | if (!beacon_val) | ||
295 | return DEFAULT_BEACON_INTERVAL; | ||
296 | |||
297 | /* | ||
298 | * If the beacon interval we obtained from the peer | ||
299 | * is too large, we'll have to wake up more often | ||
300 | * (and in IBSS case, we'll beacon too much) | ||
301 | * | ||
302 | * For example, if max_beacon_val is 4096, and the | ||
303 | * requested beacon interval is 7000, we'll have to | ||
304 | * use 3500 to be able to wake up on the beacons. | ||
305 | * | ||
306 | * This could badly influence beacon detection stats. | ||
307 | */ | ||
308 | |||
309 | beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val; | ||
310 | new_val = beacon_val / beacon_factor; | ||
311 | |||
312 | if (!new_val) | ||
313 | new_val = max_beacon_val; | ||
314 | |||
315 | return new_val; | ||
316 | } | ||
317 | |||
318 | int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx) | ||
319 | { | ||
320 | u64 tsf; | ||
321 | s32 interval_tm, rem; | ||
322 | struct ieee80211_conf *conf = NULL; | ||
323 | u16 beacon_int; | ||
324 | struct ieee80211_vif *vif = ctx->vif; | ||
325 | |||
326 | conf = ieee80211_get_hw_conf(priv->hw); | ||
327 | |||
328 | lockdep_assert_held(&priv->mutex); | ||
329 | |||
330 | memset(&ctx->timing, 0, sizeof(struct iwl_rxon_time_cmd)); | ||
331 | |||
332 | ctx->timing.timestamp = cpu_to_le64(priv->timestamp); | ||
333 | ctx->timing.listen_interval = cpu_to_le16(conf->listen_interval); | ||
334 | |||
335 | beacon_int = vif ? vif->bss_conf.beacon_int : 0; | ||
336 | |||
337 | /* | ||
338 | * TODO: For IBSS we need to get atim_window from mac80211, | ||
339 | * for now just always use 0 | ||
340 | */ | ||
341 | ctx->timing.atim_window = 0; | ||
342 | |||
343 | if (ctx->ctxid == IWL_RXON_CTX_PAN && | ||
344 | (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION) && | ||
345 | iwl_is_associated(priv, IWL_RXON_CTX_BSS) && | ||
346 | priv->contexts[IWL_RXON_CTX_BSS].vif && | ||
347 | priv->contexts[IWL_RXON_CTX_BSS].vif->bss_conf.beacon_int) { | ||
348 | ctx->timing.beacon_interval = | ||
349 | priv->contexts[IWL_RXON_CTX_BSS].timing.beacon_interval; | ||
350 | beacon_int = le16_to_cpu(ctx->timing.beacon_interval); | ||
351 | } else if (ctx->ctxid == IWL_RXON_CTX_BSS && | ||
352 | iwl_is_associated(priv, IWL_RXON_CTX_PAN) && | ||
353 | priv->contexts[IWL_RXON_CTX_PAN].vif && | ||
354 | priv->contexts[IWL_RXON_CTX_PAN].vif->bss_conf.beacon_int && | ||
355 | (!iwl_is_associated_ctx(ctx) || !ctx->vif || | ||
356 | !ctx->vif->bss_conf.beacon_int)) { | ||
357 | ctx->timing.beacon_interval = | ||
358 | priv->contexts[IWL_RXON_CTX_PAN].timing.beacon_interval; | ||
359 | beacon_int = le16_to_cpu(ctx->timing.beacon_interval); | ||
360 | } else { | ||
361 | beacon_int = iwl_adjust_beacon_interval(beacon_int, | ||
362 | priv->hw_params.max_beacon_itrvl * TIME_UNIT); | ||
363 | ctx->timing.beacon_interval = cpu_to_le16(beacon_int); | ||
364 | } | ||
365 | |||
366 | ctx->beacon_int = beacon_int; | ||
367 | |||
368 | tsf = priv->timestamp; /* tsf is modifed by do_div: copy it */ | ||
369 | interval_tm = beacon_int * TIME_UNIT; | ||
370 | rem = do_div(tsf, interval_tm); | ||
371 | ctx->timing.beacon_init_val = cpu_to_le32(interval_tm - rem); | ||
372 | |||
373 | ctx->timing.dtim_period = vif ? (vif->bss_conf.dtim_period ?: 1) : 1; | ||
374 | |||
375 | IWL_DEBUG_ASSOC(priv, | ||
376 | "beacon interval %d beacon timer %d beacon tim %d\n", | ||
377 | le16_to_cpu(ctx->timing.beacon_interval), | ||
378 | le32_to_cpu(ctx->timing.beacon_init_val), | ||
379 | le16_to_cpu(ctx->timing.atim_window)); | ||
380 | |||
381 | return trans_send_cmd_pdu(&priv->trans, ctx->rxon_timing_cmd, | ||
382 | CMD_SYNC, sizeof(ctx->timing), &ctx->timing); | ||
383 | } | ||
384 | |||
385 | void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx, | ||
386 | int hw_decrypt) | ||
387 | { | ||
388 | struct iwl_rxon_cmd *rxon = &ctx->staging; | ||
389 | |||
390 | if (hw_decrypt) | ||
391 | rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK; | ||
392 | else | ||
393 | rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; | ||
394 | |||
395 | } | ||
396 | |||
397 | /* validate RXON structure is valid */ | ||
398 | int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx) | ||
399 | { | ||
400 | struct iwl_rxon_cmd *rxon = &ctx->staging; | ||
401 | u32 errors = 0; | ||
402 | |||
403 | if (rxon->flags & RXON_FLG_BAND_24G_MSK) { | ||
404 | if (rxon->flags & RXON_FLG_TGJ_NARROW_BAND_MSK) { | ||
405 | IWL_WARN(priv, "check 2.4G: wrong narrow\n"); | ||
406 | errors |= BIT(0); | ||
407 | } | ||
408 | if (rxon->flags & RXON_FLG_RADAR_DETECT_MSK) { | ||
409 | IWL_WARN(priv, "check 2.4G: wrong radar\n"); | ||
410 | errors |= BIT(1); | ||
411 | } | ||
412 | } else { | ||
413 | if (!(rxon->flags & RXON_FLG_SHORT_SLOT_MSK)) { | ||
414 | IWL_WARN(priv, "check 5.2G: not short slot!\n"); | ||
415 | errors |= BIT(2); | ||
416 | } | ||
417 | if (rxon->flags & RXON_FLG_CCK_MSK) { | ||
418 | IWL_WARN(priv, "check 5.2G: CCK!\n"); | ||
419 | errors |= BIT(3); | ||
420 | } | ||
421 | } | ||
422 | if ((rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1) { | ||
423 | IWL_WARN(priv, "mac/bssid mcast!\n"); | ||
424 | errors |= BIT(4); | ||
425 | } | ||
426 | |||
427 | /* make sure basic rates 6Mbps and 1Mbps are supported */ | ||
428 | if ((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0 && | ||
429 | (rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0) { | ||
430 | IWL_WARN(priv, "neither 1 nor 6 are basic\n"); | ||
431 | errors |= BIT(5); | ||
432 | } | ||
433 | |||
434 | if (le16_to_cpu(rxon->assoc_id) > 2007) { | ||
435 | IWL_WARN(priv, "aid > 2007\n"); | ||
436 | errors |= BIT(6); | ||
437 | } | ||
438 | |||
439 | if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) | ||
440 | == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) { | ||
441 | IWL_WARN(priv, "CCK and short slot\n"); | ||
442 | errors |= BIT(7); | ||
443 | } | ||
444 | |||
445 | if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) | ||
446 | == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) { | ||
447 | IWL_WARN(priv, "CCK and auto detect"); | ||
448 | errors |= BIT(8); | ||
449 | } | ||
450 | |||
451 | if ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK | | ||
452 | RXON_FLG_TGG_PROTECT_MSK)) == | ||
453 | RXON_FLG_TGG_PROTECT_MSK) { | ||
454 | IWL_WARN(priv, "TGg but no auto-detect\n"); | ||
455 | errors |= BIT(9); | ||
456 | } | ||
457 | |||
458 | if (rxon->channel == 0) { | ||
459 | IWL_WARN(priv, "zero channel is invalid\n"); | ||
460 | errors |= BIT(10); | ||
461 | } | ||
462 | |||
463 | WARN(errors, "Invalid RXON (%#x), channel %d", | ||
464 | errors, le16_to_cpu(rxon->channel)); | ||
465 | |||
466 | return errors ? -EINVAL : 0; | ||
467 | } | ||
468 | |||
469 | /** | ||
470 | * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed | ||
471 | * @priv: staging_rxon is compared to active_rxon | ||
472 | * | ||
473 | * If the RXON structure is changing enough to require a new tune, | ||
474 | * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that | ||
475 | * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. | ||
476 | */ | ||
477 | int iwl_full_rxon_required(struct iwl_priv *priv, | ||
478 | struct iwl_rxon_context *ctx) | ||
479 | { | ||
480 | const struct iwl_rxon_cmd *staging = &ctx->staging; | ||
481 | const struct iwl_rxon_cmd *active = &ctx->active; | ||
482 | |||
483 | #define CHK(cond) \ | ||
484 | if ((cond)) { \ | ||
485 | IWL_DEBUG_INFO(priv, "need full RXON - " #cond "\n"); \ | ||
486 | return 1; \ | ||
487 | } | ||
488 | |||
489 | #define CHK_NEQ(c1, c2) \ | ||
490 | if ((c1) != (c2)) { \ | ||
491 | IWL_DEBUG_INFO(priv, "need full RXON - " \ | ||
492 | #c1 " != " #c2 " - %d != %d\n", \ | ||
493 | (c1), (c2)); \ | ||
494 | return 1; \ | ||
495 | } | ||
496 | |||
497 | /* These items are only settable from the full RXON command */ | ||
498 | CHK(!iwl_is_associated_ctx(ctx)); | ||
499 | CHK(compare_ether_addr(staging->bssid_addr, active->bssid_addr)); | ||
500 | CHK(compare_ether_addr(staging->node_addr, active->node_addr)); | ||
501 | CHK(compare_ether_addr(staging->wlap_bssid_addr, | ||
502 | active->wlap_bssid_addr)); | ||
503 | CHK_NEQ(staging->dev_type, active->dev_type); | ||
504 | CHK_NEQ(staging->channel, active->channel); | ||
505 | CHK_NEQ(staging->air_propagation, active->air_propagation); | ||
506 | CHK_NEQ(staging->ofdm_ht_single_stream_basic_rates, | ||
507 | active->ofdm_ht_single_stream_basic_rates); | ||
508 | CHK_NEQ(staging->ofdm_ht_dual_stream_basic_rates, | ||
509 | active->ofdm_ht_dual_stream_basic_rates); | ||
510 | CHK_NEQ(staging->ofdm_ht_triple_stream_basic_rates, | ||
511 | active->ofdm_ht_triple_stream_basic_rates); | ||
512 | CHK_NEQ(staging->assoc_id, active->assoc_id); | ||
513 | |||
514 | /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can | ||
515 | * be updated with the RXON_ASSOC command -- however only some | ||
516 | * flag transitions are allowed using RXON_ASSOC */ | ||
517 | |||
518 | /* Check if we are not switching bands */ | ||
519 | CHK_NEQ(staging->flags & RXON_FLG_BAND_24G_MSK, | ||
520 | active->flags & RXON_FLG_BAND_24G_MSK); | ||
521 | |||
522 | /* Check if we are switching association toggle */ | ||
523 | CHK_NEQ(staging->filter_flags & RXON_FILTER_ASSOC_MSK, | ||
524 | active->filter_flags & RXON_FILTER_ASSOC_MSK); | ||
525 | |||
526 | #undef CHK | ||
527 | #undef CHK_NEQ | ||
528 | |||
529 | return 0; | ||
530 | } | ||
531 | |||
532 | static void _iwl_set_rxon_ht(struct iwl_priv *priv, | ||
533 | struct iwl_ht_config *ht_conf, | ||
534 | struct iwl_rxon_context *ctx) | ||
535 | { | ||
536 | struct iwl_rxon_cmd *rxon = &ctx->staging; | ||
537 | |||
538 | if (!ctx->ht.enabled) { | ||
539 | rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | | ||
540 | RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK | | ||
541 | RXON_FLG_HT40_PROT_MSK | | ||
542 | RXON_FLG_HT_PROT_MSK); | ||
543 | return; | ||
544 | } | ||
545 | |||
546 | /* FIXME: if the definition of ht.protection changed, the "translation" | ||
547 | * will be needed for rxon->flags | ||
548 | */ | ||
549 | rxon->flags |= cpu_to_le32(ctx->ht.protection << RXON_FLG_HT_OPERATING_MODE_POS); | ||
550 | |||
551 | /* Set up channel bandwidth: | ||
552 | * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */ | ||
553 | /* clear the HT channel mode before set the mode */ | ||
554 | rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | | ||
555 | RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); | ||
556 | if (iwl_is_ht40_tx_allowed(priv, ctx, NULL)) { | ||
557 | /* pure ht40 */ | ||
558 | if (ctx->ht.protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) { | ||
559 | rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40; | ||
560 | /* Note: control channel is opposite of extension channel */ | ||
561 | switch (ctx->ht.extension_chan_offset) { | ||
562 | case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | ||
563 | rxon->flags &= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; | ||
564 | break; | ||
565 | case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | ||
566 | rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; | ||
567 | break; | ||
568 | } | ||
569 | } else { | ||
570 | /* Note: control channel is opposite of extension channel */ | ||
571 | switch (ctx->ht.extension_chan_offset) { | ||
572 | case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | ||
573 | rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); | ||
574 | rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; | ||
575 | break; | ||
576 | case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | ||
577 | rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; | ||
578 | rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; | ||
579 | break; | ||
580 | case IEEE80211_HT_PARAM_CHA_SEC_NONE: | ||
581 | default: | ||
582 | /* channel location only valid if in Mixed mode */ | ||
583 | IWL_ERR(priv, "invalid extension channel offset\n"); | ||
584 | break; | ||
585 | } | ||
586 | } | ||
587 | } else { | ||
588 | rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY; | ||
589 | } | ||
590 | |||
591 | iwlagn_set_rxon_chain(priv, ctx); | ||
592 | |||
593 | IWL_DEBUG_ASSOC(priv, "rxon flags 0x%X operation mode :0x%X " | ||
594 | "extension channel offset 0x%x\n", | ||
595 | le32_to_cpu(rxon->flags), ctx->ht.protection, | ||
596 | ctx->ht.extension_chan_offset); | ||
597 | } | ||
598 | |||
599 | void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf) | ||
600 | { | ||
601 | struct iwl_rxon_context *ctx; | ||
602 | |||
603 | for_each_context(priv, ctx) | ||
604 | _iwl_set_rxon_ht(priv, ht_conf, ctx); | ||
605 | } | ||
606 | |||
607 | /* Return valid, unused, channel for a passive scan to reset the RF */ | ||
608 | u8 iwl_get_single_channel_number(struct iwl_priv *priv, | ||
609 | enum ieee80211_band band) | ||
610 | { | ||
611 | const struct iwl_channel_info *ch_info; | ||
612 | int i; | ||
613 | u8 channel = 0; | ||
614 | u8 min, max; | ||
615 | struct iwl_rxon_context *ctx; | ||
616 | |||
617 | if (band == IEEE80211_BAND_5GHZ) { | ||
618 | min = 14; | ||
619 | max = priv->channel_count; | ||
620 | } else { | ||
621 | min = 0; | ||
622 | max = 14; | ||
623 | } | ||
624 | |||
625 | for (i = min; i < max; i++) { | ||
626 | bool busy = false; | ||
627 | |||
628 | for_each_context(priv, ctx) { | ||
629 | busy = priv->channel_info[i].channel == | ||
630 | le16_to_cpu(ctx->staging.channel); | ||
631 | if (busy) | ||
632 | break; | ||
633 | } | ||
634 | |||
635 | if (busy) | ||
636 | continue; | ||
637 | |||
638 | channel = priv->channel_info[i].channel; | ||
639 | ch_info = iwl_get_channel_info(priv, band, channel); | ||
640 | if (is_channel_valid(ch_info)) | ||
641 | break; | ||
642 | } | ||
643 | |||
644 | return channel; | ||
645 | } | ||
646 | |||
647 | /** | ||
648 | * iwl_set_rxon_channel - Set the band and channel values in staging RXON | ||
649 | * @ch: requested channel as a pointer to struct ieee80211_channel | ||
650 | |||
651 | * NOTE: Does not commit to the hardware; it sets appropriate bit fields | ||
652 | * in the staging RXON flag structure based on the ch->band | ||
653 | */ | ||
654 | int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch, | ||
655 | struct iwl_rxon_context *ctx) | ||
656 | { | ||
657 | enum ieee80211_band band = ch->band; | ||
658 | u16 channel = ch->hw_value; | ||
659 | |||
660 | if ((le16_to_cpu(ctx->staging.channel) == channel) && | ||
661 | (priv->band == band)) | ||
662 | return 0; | ||
663 | |||
664 | ctx->staging.channel = cpu_to_le16(channel); | ||
665 | if (band == IEEE80211_BAND_5GHZ) | ||
666 | ctx->staging.flags &= ~RXON_FLG_BAND_24G_MSK; | ||
667 | else | ||
668 | ctx->staging.flags |= RXON_FLG_BAND_24G_MSK; | ||
669 | |||
670 | priv->band = band; | ||
671 | |||
672 | IWL_DEBUG_INFO(priv, "Staging channel set to %d [%d]\n", channel, band); | ||
673 | |||
674 | return 0; | ||
675 | } | ||
676 | |||
677 | void iwl_set_flags_for_band(struct iwl_priv *priv, | ||
678 | struct iwl_rxon_context *ctx, | ||
679 | enum ieee80211_band band, | ||
680 | struct ieee80211_vif *vif) | ||
681 | { | ||
682 | if (band == IEEE80211_BAND_5GHZ) { | ||
683 | ctx->staging.flags &= | ||
684 | ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK | ||
685 | | RXON_FLG_CCK_MSK); | ||
686 | ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; | ||
687 | } else { | ||
688 | /* Copied from iwl_post_associate() */ | ||
689 | if (vif && vif->bss_conf.use_short_slot) | ||
690 | ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; | ||
691 | else | ||
692 | ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; | ||
693 | |||
694 | ctx->staging.flags |= RXON_FLG_BAND_24G_MSK; | ||
695 | ctx->staging.flags |= RXON_FLG_AUTO_DETECT_MSK; | ||
696 | ctx->staging.flags &= ~RXON_FLG_CCK_MSK; | ||
697 | } | ||
698 | } | ||
699 | |||
700 | /* | ||
701 | * initialize rxon structure with default values from eeprom | ||
702 | */ | ||
703 | void iwl_connection_init_rx_config(struct iwl_priv *priv, | ||
704 | struct iwl_rxon_context *ctx) | ||
705 | { | ||
706 | const struct iwl_channel_info *ch_info; | ||
707 | |||
708 | memset(&ctx->staging, 0, sizeof(ctx->staging)); | ||
709 | |||
710 | if (!ctx->vif) { | ||
711 | ctx->staging.dev_type = ctx->unused_devtype; | ||
712 | } else switch (ctx->vif->type) { | ||
713 | case NL80211_IFTYPE_AP: | ||
714 | ctx->staging.dev_type = ctx->ap_devtype; | ||
715 | break; | ||
716 | |||
717 | case NL80211_IFTYPE_STATION: | ||
718 | ctx->staging.dev_type = ctx->station_devtype; | ||
719 | ctx->staging.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; | ||
720 | break; | ||
721 | |||
722 | case NL80211_IFTYPE_ADHOC: | ||
723 | ctx->staging.dev_type = ctx->ibss_devtype; | ||
724 | ctx->staging.flags = RXON_FLG_SHORT_PREAMBLE_MSK; | ||
725 | ctx->staging.filter_flags = RXON_FILTER_BCON_AWARE_MSK | | ||
726 | RXON_FILTER_ACCEPT_GRP_MSK; | ||
727 | break; | ||
728 | |||
729 | default: | ||
730 | IWL_ERR(priv, "Unsupported interface type %d\n", | ||
731 | ctx->vif->type); | ||
732 | break; | ||
733 | } | ||
734 | |||
735 | #if 0 | ||
736 | /* TODO: Figure out when short_preamble would be set and cache from | ||
737 | * that */ | ||
738 | if (!hw_to_local(priv->hw)->short_preamble) | ||
739 | ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; | ||
740 | else | ||
741 | ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; | ||
742 | #endif | ||
743 | |||
744 | ch_info = iwl_get_channel_info(priv, priv->band, | ||
745 | le16_to_cpu(ctx->active.channel)); | ||
746 | |||
747 | if (!ch_info) | ||
748 | ch_info = &priv->channel_info[0]; | ||
749 | |||
750 | ctx->staging.channel = cpu_to_le16(ch_info->channel); | ||
751 | priv->band = ch_info->band; | ||
752 | |||
753 | iwl_set_flags_for_band(priv, ctx, priv->band, ctx->vif); | ||
754 | |||
755 | ctx->staging.ofdm_basic_rates = | ||
756 | (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; | ||
757 | ctx->staging.cck_basic_rates = | ||
758 | (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; | ||
759 | |||
760 | /* clear both MIX and PURE40 mode flag */ | ||
761 | ctx->staging.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED | | ||
762 | RXON_FLG_CHANNEL_MODE_PURE_40); | ||
763 | if (ctx->vif) | ||
764 | memcpy(ctx->staging.node_addr, ctx->vif->addr, ETH_ALEN); | ||
765 | |||
766 | ctx->staging.ofdm_ht_single_stream_basic_rates = 0xff; | ||
767 | ctx->staging.ofdm_ht_dual_stream_basic_rates = 0xff; | ||
768 | ctx->staging.ofdm_ht_triple_stream_basic_rates = 0xff; | ||
769 | } | ||
770 | |||
771 | void iwl_set_rate(struct iwl_priv *priv) | ||
772 | { | ||
773 | const struct ieee80211_supported_band *hw = NULL; | ||
774 | struct ieee80211_rate *rate; | ||
775 | struct iwl_rxon_context *ctx; | ||
776 | int i; | ||
777 | |||
778 | hw = iwl_get_hw_mode(priv, priv->band); | ||
779 | if (!hw) { | ||
780 | IWL_ERR(priv, "Failed to set rate: unable to get hw mode\n"); | ||
781 | return; | ||
782 | } | ||
783 | |||
784 | priv->active_rate = 0; | ||
785 | |||
786 | for (i = 0; i < hw->n_bitrates; i++) { | ||
787 | rate = &(hw->bitrates[i]); | ||
788 | if (rate->hw_value < IWL_RATE_COUNT_LEGACY) | ||
789 | priv->active_rate |= (1 << rate->hw_value); | ||
790 | } | ||
791 | |||
792 | IWL_DEBUG_RATE(priv, "Set active_rate = %0x\n", priv->active_rate); | ||
793 | |||
794 | for_each_context(priv, ctx) { | ||
795 | ctx->staging.cck_basic_rates = | ||
796 | (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; | ||
797 | |||
798 | ctx->staging.ofdm_basic_rates = | ||
799 | (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; | ||
800 | } | ||
801 | } | ||
802 | |||
803 | void iwl_chswitch_done(struct iwl_priv *priv, bool is_success) | ||
804 | { | ||
805 | /* | ||
806 | * MULTI-FIXME | ||
807 | * See iwl_mac_channel_switch. | ||
808 | */ | ||
809 | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | ||
810 | |||
811 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | ||
812 | return; | ||
813 | |||
814 | if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) | ||
815 | ieee80211_chswitch_done(ctx->vif, is_success); | ||
816 | } | ||
817 | |||
818 | #ifdef CONFIG_IWLWIFI_DEBUG | ||
819 | void iwl_print_rx_config_cmd(struct iwl_priv *priv, | ||
820 | struct iwl_rxon_context *ctx) | ||
821 | { | ||
822 | struct iwl_rxon_cmd *rxon = &ctx->staging; | ||
823 | |||
824 | IWL_DEBUG_RADIO(priv, "RX CONFIG:\n"); | ||
825 | iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon)); | ||
826 | IWL_DEBUG_RADIO(priv, "u16 channel: 0x%x\n", le16_to_cpu(rxon->channel)); | ||
827 | IWL_DEBUG_RADIO(priv, "u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags)); | ||
828 | IWL_DEBUG_RADIO(priv, "u32 filter_flags: 0x%08x\n", | ||
829 | le32_to_cpu(rxon->filter_flags)); | ||
830 | IWL_DEBUG_RADIO(priv, "u8 dev_type: 0x%x\n", rxon->dev_type); | ||
831 | IWL_DEBUG_RADIO(priv, "u8 ofdm_basic_rates: 0x%02x\n", | ||
832 | rxon->ofdm_basic_rates); | ||
833 | IWL_DEBUG_RADIO(priv, "u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates); | ||
834 | IWL_DEBUG_RADIO(priv, "u8[6] node_addr: %pM\n", rxon->node_addr); | ||
835 | IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr); | ||
836 | IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); | ||
837 | } | ||
838 | #endif | ||
839 | |||
840 | static void iwlagn_abort_notification_waits(struct iwl_priv *priv) | ||
841 | { | ||
842 | unsigned long flags; | ||
843 | struct iwl_notification_wait *wait_entry; | ||
844 | |||
845 | spin_lock_irqsave(&priv->notif_wait_lock, flags); | ||
846 | list_for_each_entry(wait_entry, &priv->notif_waits, list) | ||
847 | wait_entry->aborted = true; | ||
848 | spin_unlock_irqrestore(&priv->notif_wait_lock, flags); | ||
849 | |||
850 | wake_up_all(&priv->notif_waitq); | ||
851 | } | ||
852 | |||
853 | void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand) | ||
854 | { | ||
855 | unsigned int reload_msec; | ||
856 | unsigned long reload_jiffies; | ||
857 | |||
858 | /* Set the FW error flag -- cleared on iwl_down */ | ||
859 | set_bit(STATUS_FW_ERROR, &priv->status); | ||
860 | |||
861 | /* Cancel currently queued command. */ | ||
862 | clear_bit(STATUS_HCMD_ACTIVE, &priv->status); | ||
863 | |||
864 | iwlagn_abort_notification_waits(priv); | ||
865 | |||
866 | /* Keep the restart process from trying to send host | ||
867 | * commands by clearing the ready bit */ | ||
868 | clear_bit(STATUS_READY, &priv->status); | ||
869 | |||
870 | wake_up(&priv->wait_command_queue); | ||
871 | |||
872 | if (!ondemand) { | ||
873 | /* | ||
874 | * If firmware keep reloading, then it indicate something | ||
875 | * serious wrong and firmware having problem to recover | ||
876 | * from it. Instead of keep trying which will fill the syslog | ||
877 | * and hang the system, let's just stop it | ||
878 | */ | ||
879 | reload_jiffies = jiffies; | ||
880 | reload_msec = jiffies_to_msecs((long) reload_jiffies - | ||
881 | (long) priv->reload_jiffies); | ||
882 | priv->reload_jiffies = reload_jiffies; | ||
883 | if (reload_msec <= IWL_MIN_RELOAD_DURATION) { | ||
884 | priv->reload_count++; | ||
885 | if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) { | ||
886 | IWL_ERR(priv, "BUG_ON, Stop restarting\n"); | ||
887 | return; | ||
888 | } | ||
889 | } else | ||
890 | priv->reload_count = 0; | ||
891 | } | ||
892 | |||
893 | if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { | ||
894 | if (iwlagn_mod_params.restart_fw) { | ||
895 | IWL_DEBUG(priv, IWL_DL_FW_ERRORS, | ||
896 | "Restarting adapter due to uCode error.\n"); | ||
897 | queue_work(priv->workqueue, &priv->restart); | ||
898 | } else | ||
899 | IWL_DEBUG(priv, IWL_DL_FW_ERRORS, | ||
900 | "Detected FW error, but not restarting\n"); | ||
901 | } | ||
902 | } | ||
903 | |||
904 | /** | ||
905 | * iwl_irq_handle_error - called for HW or SW error interrupt from card | ||
906 | */ | ||
907 | void iwl_irq_handle_error(struct iwl_priv *priv) | ||
908 | { | ||
909 | /* W/A for WiFi/WiMAX coex and WiMAX own the RF */ | ||
910 | if (priv->cfg->internal_wimax_coex && | ||
911 | (!(iwl_read_prph(priv, APMG_CLK_CTRL_REG) & | ||
912 | APMS_CLK_VAL_MRB_FUNC_MODE) || | ||
913 | (iwl_read_prph(priv, APMG_PS_CTRL_REG) & | ||
914 | APMG_PS_CTRL_VAL_RESET_REQ))) { | ||
915 | /* | ||
916 | * Keep the restart process from trying to send host | ||
917 | * commands by clearing the ready bit. | ||
918 | */ | ||
919 | clear_bit(STATUS_READY, &priv->status); | ||
920 | clear_bit(STATUS_HCMD_ACTIVE, &priv->status); | ||
921 | wake_up(&priv->wait_command_queue); | ||
922 | IWL_ERR(priv, "RF is used by WiMAX\n"); | ||
923 | return; | ||
924 | } | ||
925 | |||
926 | IWL_ERR(priv, "Loaded firmware version: %s\n", | ||
927 | priv->hw->wiphy->fw_version); | ||
928 | |||
929 | iwl_dump_nic_error_log(priv); | ||
930 | iwl_dump_csr(priv); | ||
931 | iwl_dump_fh(priv, NULL, false); | ||
932 | iwl_dump_nic_event_log(priv, false, NULL, false); | ||
933 | #ifdef CONFIG_IWLWIFI_DEBUG | ||
934 | if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) | ||
935 | iwl_print_rx_config_cmd(priv, | ||
936 | &priv->contexts[IWL_RXON_CTX_BSS]); | ||
937 | #endif | ||
938 | |||
939 | iwlagn_fw_error(priv, false); | ||
940 | } | ||
941 | |||
942 | static int iwl_apm_stop_master(struct iwl_priv *priv) | ||
943 | { | ||
944 | int ret = 0; | ||
945 | |||
946 | /* stop device's busmaster DMA activity */ | ||
947 | iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER); | ||
948 | |||
949 | ret = iwl_poll_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED, | ||
950 | CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); | ||
951 | if (ret) | ||
952 | IWL_WARN(priv, "Master Disable Timed Out, 100 usec\n"); | ||
953 | |||
954 | IWL_DEBUG_INFO(priv, "stop master\n"); | ||
955 | |||
956 | return ret; | ||
957 | } | ||
958 | |||
959 | void iwl_apm_stop(struct iwl_priv *priv) | ||
960 | { | ||
961 | IWL_DEBUG_INFO(priv, "Stop card, put in low power state\n"); | ||
962 | |||
963 | clear_bit(STATUS_DEVICE_ENABLED, &priv->status); | ||
964 | |||
965 | /* Stop device's DMA activity */ | ||
966 | iwl_apm_stop_master(priv); | ||
967 | |||
968 | /* Reset the entire device */ | ||
969 | iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); | ||
970 | |||
971 | udelay(10); | ||
972 | |||
973 | /* | ||
974 | * Clear "initialization complete" bit to move adapter from | ||
975 | * D0A* (powered-up Active) --> D0U* (Uninitialized) state. | ||
976 | */ | ||
977 | iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); | ||
978 | } | ||
979 | |||
980 | |||
981 | /* | ||
982 | * Start up NIC's basic functionality after it has been reset | ||
983 | * (e.g. after platform boot, or shutdown via iwl_apm_stop()) | ||
984 | * NOTE: This does not load uCode nor start the embedded processor | ||
985 | */ | ||
986 | int iwl_apm_init(struct iwl_priv *priv) | ||
987 | { | ||
988 | int ret = 0; | ||
989 | IWL_DEBUG_INFO(priv, "Init card's basic functions\n"); | ||
990 | |||
991 | /* | ||
992 | * Use "set_bit" below rather than "write", to preserve any hardware | ||
993 | * bits already set by default after reset. | ||
994 | */ | ||
995 | |||
996 | /* Disable L0S exit timer (platform NMI Work/Around) */ | ||
997 | iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, | ||
998 | CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); | ||
999 | |||
1000 | /* | ||
1001 | * Disable L0s without affecting L1; | ||
1002 | * don't wait for ICH L0s (ICH bug W/A) | ||
1003 | */ | ||
1004 | iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, | ||
1005 | CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); | ||
1006 | |||
1007 | /* Set FH wait threshold to maximum (HW error during stress W/A) */ | ||
1008 | iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL); | ||
1009 | |||
1010 | /* | ||
1011 | * Enable HAP INTA (interrupt from management bus) to | ||
1012 | * wake device's PCI Express link L1a -> L0s | ||
1013 | */ | ||
1014 | iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, | ||
1015 | CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); | ||
1016 | |||
1017 | bus_apm_config(priv->bus); | ||
1018 | |||
1019 | /* Configure analog phase-lock-loop before activating to D0A */ | ||
1020 | if (priv->cfg->base_params->pll_cfg_val) | ||
1021 | iwl_set_bit(priv, CSR_ANA_PLL_CFG, | ||
1022 | priv->cfg->base_params->pll_cfg_val); | ||
1023 | |||
1024 | /* | ||
1025 | * Set "initialization complete" bit to move adapter from | ||
1026 | * D0U* --> D0A* (powered-up active) state. | ||
1027 | */ | ||
1028 | iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); | ||
1029 | |||
1030 | /* | ||
1031 | * Wait for clock stabilization; once stabilized, access to | ||
1032 | * device-internal resources is supported, e.g. iwl_write_prph() | ||
1033 | * and accesses to uCode SRAM. | ||
1034 | */ | ||
1035 | ret = iwl_poll_bit(priv, CSR_GP_CNTRL, | ||
1036 | CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, | ||
1037 | CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); | ||
1038 | if (ret < 0) { | ||
1039 | IWL_DEBUG_INFO(priv, "Failed to init the card\n"); | ||
1040 | goto out; | ||
1041 | } | ||
1042 | |||
1043 | /* | ||
1044 | * Enable DMA clock and wait for it to stabilize. | ||
1045 | * | ||
1046 | * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits | ||
1047 | * do not disable clocks. This preserves any hardware bits already | ||
1048 | * set by default in "CLK_CTRL_REG" after reset. | ||
1049 | */ | ||
1050 | iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT); | ||
1051 | udelay(20); | ||
1052 | |||
1053 | /* Disable L1-Active */ | ||
1054 | iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, | ||
1055 | APMG_PCIDEV_STT_VAL_L1_ACT_DIS); | ||
1056 | |||
1057 | set_bit(STATUS_DEVICE_ENABLED, &priv->status); | ||
1058 | |||
1059 | out: | ||
1060 | return ret; | ||
1061 | } | ||
1062 | |||
1063 | |||
1064 | int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) | ||
1065 | { | ||
1066 | int ret; | ||
1067 | s8 prev_tx_power; | ||
1068 | bool defer; | ||
1069 | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | ||
1070 | |||
1071 | lockdep_assert_held(&priv->mutex); | ||
1072 | |||
1073 | if (priv->tx_power_user_lmt == tx_power && !force) | ||
1074 | return 0; | ||
1075 | |||
1076 | if (tx_power < IWLAGN_TX_POWER_TARGET_POWER_MIN) { | ||
1077 | IWL_WARN(priv, | ||
1078 | "Requested user TXPOWER %d below lower limit %d.\n", | ||
1079 | tx_power, | ||
1080 | IWLAGN_TX_POWER_TARGET_POWER_MIN); | ||
1081 | return -EINVAL; | ||
1082 | } | ||
1083 | |||
1084 | if (tx_power > priv->tx_power_device_lmt) { | ||
1085 | IWL_WARN(priv, | ||
1086 | "Requested user TXPOWER %d above upper limit %d.\n", | ||
1087 | tx_power, priv->tx_power_device_lmt); | ||
1088 | return -EINVAL; | ||
1089 | } | ||
1090 | |||
1091 | if (!iwl_is_ready_rf(priv)) | ||
1092 | return -EIO; | ||
1093 | |||
1094 | /* scan complete and commit_rxon use tx_power_next value, | ||
1095 | * it always need to be updated for newest request */ | ||
1096 | priv->tx_power_next = tx_power; | ||
1097 | |||
1098 | /* do not set tx power when scanning or channel changing */ | ||
1099 | defer = test_bit(STATUS_SCANNING, &priv->status) || | ||
1100 | memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging)); | ||
1101 | if (defer && !force) { | ||
1102 | IWL_DEBUG_INFO(priv, "Deferring tx power set\n"); | ||
1103 | return 0; | ||
1104 | } | ||
1105 | |||
1106 | prev_tx_power = priv->tx_power_user_lmt; | ||
1107 | priv->tx_power_user_lmt = tx_power; | ||
1108 | |||
1109 | ret = iwlagn_send_tx_power(priv); | ||
1110 | |||
1111 | /* if fail to set tx_power, restore the orig. tx power */ | ||
1112 | if (ret) { | ||
1113 | priv->tx_power_user_lmt = prev_tx_power; | ||
1114 | priv->tx_power_next = prev_tx_power; | ||
1115 | } | ||
1116 | return ret; | ||
1117 | } | ||
1118 | |||
1119 | void iwl_send_bt_config(struct iwl_priv *priv) | ||
1120 | { | ||
1121 | struct iwl_bt_cmd bt_cmd = { | ||
1122 | .lead_time = BT_LEAD_TIME_DEF, | ||
1123 | .max_kill = BT_MAX_KILL_DEF, | ||
1124 | .kill_ack_mask = 0, | ||
1125 | .kill_cts_mask = 0, | ||
1126 | }; | ||
1127 | |||
1128 | if (!iwlagn_mod_params.bt_coex_active) | ||
1129 | bt_cmd.flags = BT_COEX_DISABLE; | ||
1130 | else | ||
1131 | bt_cmd.flags = BT_COEX_ENABLE; | ||
1132 | |||
1133 | priv->bt_enable_flag = bt_cmd.flags; | ||
1134 | IWL_DEBUG_INFO(priv, "BT coex %s\n", | ||
1135 | (bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active"); | ||
1136 | |||
1137 | if (trans_send_cmd_pdu(&priv->trans, REPLY_BT_CONFIG, | ||
1138 | CMD_SYNC, sizeof(struct iwl_bt_cmd), &bt_cmd)) | ||
1139 | IWL_ERR(priv, "failed to send BT Coex Config\n"); | ||
1140 | } | ||
1141 | |||
1142 | int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear) | ||
1143 | { | ||
1144 | struct iwl_statistics_cmd statistics_cmd = { | ||
1145 | .configuration_flags = | ||
1146 | clear ? IWL_STATS_CONF_CLEAR_STATS : 0, | ||
1147 | }; | ||
1148 | |||
1149 | if (flags & CMD_ASYNC) | ||
1150 | return trans_send_cmd_pdu(&priv->trans, REPLY_STATISTICS_CMD, | ||
1151 | CMD_ASYNC, | ||
1152 | sizeof(struct iwl_statistics_cmd), | ||
1153 | &statistics_cmd); | ||
1154 | else | ||
1155 | return trans_send_cmd_pdu(&priv->trans, REPLY_STATISTICS_CMD, | ||
1156 | CMD_SYNC, | ||
1157 | sizeof(struct iwl_statistics_cmd), | ||
1158 | &statistics_cmd); | ||
1159 | } | ||
1160 | |||
1161 | void iwl_clear_isr_stats(struct iwl_priv *priv) | ||
1162 | { | ||
1163 | memset(&priv->isr_stats, 0, sizeof(priv->isr_stats)); | ||
1164 | } | ||
1165 | |||
1166 | int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, | ||
1167 | const struct ieee80211_tx_queue_params *params) | ||
1168 | { | ||
1169 | struct iwl_priv *priv = hw->priv; | ||
1170 | struct iwl_rxon_context *ctx; | ||
1171 | unsigned long flags; | ||
1172 | int q; | ||
1173 | |||
1174 | IWL_DEBUG_MAC80211(priv, "enter\n"); | ||
1175 | |||
1176 | if (!iwl_is_ready_rf(priv)) { | ||
1177 | IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n"); | ||
1178 | return -EIO; | ||
1179 | } | ||
1180 | |||
1181 | if (queue >= AC_NUM) { | ||
1182 | IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue); | ||
1183 | return 0; | ||
1184 | } | ||
1185 | |||
1186 | q = AC_NUM - 1 - queue; | ||
1187 | |||
1188 | spin_lock_irqsave(&priv->lock, flags); | ||
1189 | |||
1190 | /* | ||
1191 | * MULTI-FIXME | ||
1192 | * This may need to be done per interface in nl80211/cfg80211/mac80211. | ||
1193 | */ | ||
1194 | for_each_context(priv, ctx) { | ||
1195 | ctx->qos_data.def_qos_parm.ac[q].cw_min = | ||
1196 | cpu_to_le16(params->cw_min); | ||
1197 | ctx->qos_data.def_qos_parm.ac[q].cw_max = | ||
1198 | cpu_to_le16(params->cw_max); | ||
1199 | ctx->qos_data.def_qos_parm.ac[q].aifsn = params->aifs; | ||
1200 | ctx->qos_data.def_qos_parm.ac[q].edca_txop = | ||
1201 | cpu_to_le16((params->txop * 32)); | ||
1202 | |||
1203 | ctx->qos_data.def_qos_parm.ac[q].reserved1 = 0; | ||
1204 | } | ||
1205 | |||
1206 | spin_unlock_irqrestore(&priv->lock, flags); | ||
1207 | |||
1208 | IWL_DEBUG_MAC80211(priv, "leave\n"); | ||
1209 | return 0; | ||
1210 | } | ||
1211 | |||
1212 | int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw) | ||
1213 | { | ||
1214 | struct iwl_priv *priv = hw->priv; | ||
1215 | |||
1216 | return priv->ibss_manager == IWL_IBSS_MANAGER; | ||
1217 | } | ||
1218 | |||
1219 | static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx) | ||
1220 | { | ||
1221 | iwl_connection_init_rx_config(priv, ctx); | ||
1222 | |||
1223 | iwlagn_set_rxon_chain(priv, ctx); | ||
1224 | |||
1225 | return iwlagn_commit_rxon(priv, ctx); | ||
1226 | } | ||
1227 | |||
1228 | static int iwl_setup_interface(struct iwl_priv *priv, | ||
1229 | struct iwl_rxon_context *ctx) | ||
1230 | { | ||
1231 | struct ieee80211_vif *vif = ctx->vif; | ||
1232 | int err; | ||
1233 | |||
1234 | lockdep_assert_held(&priv->mutex); | ||
1235 | |||
1236 | /* | ||
1237 | * This variable will be correct only when there's just | ||
1238 | * a single context, but all code using it is for hardware | ||
1239 | * that supports only one context. | ||
1240 | */ | ||
1241 | priv->iw_mode = vif->type; | ||
1242 | |||
1243 | ctx->is_active = true; | ||
1244 | |||
1245 | err = iwl_set_mode(priv, ctx); | ||
1246 | if (err) { | ||
1247 | if (!ctx->always_active) | ||
1248 | ctx->is_active = false; | ||
1249 | return err; | ||
1250 | } | ||
1251 | |||
1252 | if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist && | ||
1253 | vif->type == NL80211_IFTYPE_ADHOC) { | ||
1254 | /* | ||
1255 | * pretend to have high BT traffic as long as we | ||
1256 | * are operating in IBSS mode, as this will cause | ||
1257 | * the rate scaling etc. to behave as intended. | ||
1258 | */ | ||
1259 | priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH; | ||
1260 | } | ||
1261 | |||
1262 | return 0; | ||
1263 | } | ||
1264 | |||
1265 | int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) | ||
1266 | { | ||
1267 | struct iwl_priv *priv = hw->priv; | ||
1268 | struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; | ||
1269 | struct iwl_rxon_context *tmp, *ctx = NULL; | ||
1270 | int err; | ||
1271 | enum nl80211_iftype viftype = ieee80211_vif_type_p2p(vif); | ||
1272 | |||
1273 | IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n", | ||
1274 | viftype, vif->addr); | ||
1275 | |||
1276 | mutex_lock(&priv->mutex); | ||
1277 | |||
1278 | if (!iwl_is_ready_rf(priv)) { | ||
1279 | IWL_WARN(priv, "Try to add interface when device not ready\n"); | ||
1280 | err = -EINVAL; | ||
1281 | goto out; | ||
1282 | } | ||
1283 | |||
1284 | for_each_context(priv, tmp) { | ||
1285 | u32 possible_modes = | ||
1286 | tmp->interface_modes | tmp->exclusive_interface_modes; | ||
1287 | |||
1288 | if (tmp->vif) { | ||
1289 | /* check if this busy context is exclusive */ | ||
1290 | if (tmp->exclusive_interface_modes & | ||
1291 | BIT(tmp->vif->type)) { | ||
1292 | err = -EINVAL; | ||
1293 | goto out; | ||
1294 | } | ||
1295 | continue; | ||
1296 | } | ||
1297 | |||
1298 | if (!(possible_modes & BIT(viftype))) | ||
1299 | continue; | ||
1300 | |||
1301 | /* have maybe usable context w/o interface */ | ||
1302 | ctx = tmp; | ||
1303 | break; | ||
1304 | } | ||
1305 | |||
1306 | if (!ctx) { | ||
1307 | err = -EOPNOTSUPP; | ||
1308 | goto out; | ||
1309 | } | ||
1310 | |||
1311 | vif_priv->ctx = ctx; | ||
1312 | ctx->vif = vif; | ||
1313 | |||
1314 | err = iwl_setup_interface(priv, ctx); | ||
1315 | if (!err) | ||
1316 | goto out; | ||
1317 | |||
1318 | ctx->vif = NULL; | ||
1319 | priv->iw_mode = NL80211_IFTYPE_STATION; | ||
1320 | out: | ||
1321 | mutex_unlock(&priv->mutex); | ||
1322 | |||
1323 | IWL_DEBUG_MAC80211(priv, "leave\n"); | ||
1324 | return err; | ||
1325 | } | ||
1326 | |||
1327 | static void iwl_teardown_interface(struct iwl_priv *priv, | ||
1328 | struct ieee80211_vif *vif, | ||
1329 | bool mode_change) | ||
1330 | { | ||
1331 | struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); | ||
1332 | |||
1333 | lockdep_assert_held(&priv->mutex); | ||
1334 | |||
1335 | if (priv->scan_vif == vif) { | ||
1336 | iwl_scan_cancel_timeout(priv, 200); | ||
1337 | iwl_force_scan_end(priv); | ||
1338 | } | ||
1339 | |||
1340 | if (!mode_change) { | ||
1341 | iwl_set_mode(priv, ctx); | ||
1342 | if (!ctx->always_active) | ||
1343 | ctx->is_active = false; | ||
1344 | } | ||
1345 | |||
1346 | /* | ||
1347 | * When removing the IBSS interface, overwrite the | ||
1348 | * BT traffic load with the stored one from the last | ||
1349 | * notification, if any. If this is a device that | ||
1350 | * doesn't implement this, this has no effect since | ||
1351 | * both values are the same and zero. | ||
1352 | */ | ||
1353 | if (vif->type == NL80211_IFTYPE_ADHOC) | ||
1354 | priv->bt_traffic_load = priv->last_bt_traffic_load; | ||
1355 | } | ||
1356 | |||
1357 | void iwl_mac_remove_interface(struct ieee80211_hw *hw, | ||
1358 | struct ieee80211_vif *vif) | ||
1359 | { | ||
1360 | struct iwl_priv *priv = hw->priv; | ||
1361 | struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); | ||
1362 | |||
1363 | IWL_DEBUG_MAC80211(priv, "enter\n"); | ||
1364 | |||
1365 | mutex_lock(&priv->mutex); | ||
1366 | |||
1367 | WARN_ON(ctx->vif != vif); | ||
1368 | ctx->vif = NULL; | ||
1369 | |||
1370 | iwl_teardown_interface(priv, vif, false); | ||
1371 | |||
1372 | mutex_unlock(&priv->mutex); | ||
1373 | |||
1374 | IWL_DEBUG_MAC80211(priv, "leave\n"); | ||
1375 | |||
1376 | } | ||
1377 | |||
1378 | #ifdef CONFIG_IWLWIFI_DEBUGFS | ||
1379 | |||
1380 | #define IWL_TRAFFIC_DUMP_SIZE (IWL_TRAFFIC_ENTRY_SIZE * IWL_TRAFFIC_ENTRIES) | ||
1381 | |||
1382 | void iwl_reset_traffic_log(struct iwl_priv *priv) | ||
1383 | { | ||
1384 | priv->tx_traffic_idx = 0; | ||
1385 | priv->rx_traffic_idx = 0; | ||
1386 | if (priv->tx_traffic) | ||
1387 | memset(priv->tx_traffic, 0, IWL_TRAFFIC_DUMP_SIZE); | ||
1388 | if (priv->rx_traffic) | ||
1389 | memset(priv->rx_traffic, 0, IWL_TRAFFIC_DUMP_SIZE); | ||
1390 | } | ||
1391 | |||
1392 | int iwl_alloc_traffic_mem(struct iwl_priv *priv) | ||
1393 | { | ||
1394 | u32 traffic_size = IWL_TRAFFIC_DUMP_SIZE; | ||
1395 | |||
1396 | if (iwl_debug_level & IWL_DL_TX) { | ||
1397 | if (!priv->tx_traffic) { | ||
1398 | priv->tx_traffic = | ||
1399 | kzalloc(traffic_size, GFP_KERNEL); | ||
1400 | if (!priv->tx_traffic) | ||
1401 | return -ENOMEM; | ||
1402 | } | ||
1403 | } | ||
1404 | if (iwl_debug_level & IWL_DL_RX) { | ||
1405 | if (!priv->rx_traffic) { | ||
1406 | priv->rx_traffic = | ||
1407 | kzalloc(traffic_size, GFP_KERNEL); | ||
1408 | if (!priv->rx_traffic) | ||
1409 | return -ENOMEM; | ||
1410 | } | ||
1411 | } | ||
1412 | iwl_reset_traffic_log(priv); | ||
1413 | return 0; | ||
1414 | } | ||
1415 | |||
1416 | void iwl_free_traffic_mem(struct iwl_priv *priv) | ||
1417 | { | ||
1418 | kfree(priv->tx_traffic); | ||
1419 | priv->tx_traffic = NULL; | ||
1420 | |||
1421 | kfree(priv->rx_traffic); | ||
1422 | priv->rx_traffic = NULL; | ||
1423 | } | ||
1424 | |||
1425 | void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv, | ||
1426 | u16 length, struct ieee80211_hdr *header) | ||
1427 | { | ||
1428 | __le16 fc; | ||
1429 | u16 len; | ||
1430 | |||
1431 | if (likely(!(iwl_debug_level & IWL_DL_TX))) | ||
1432 | return; | ||
1433 | |||
1434 | if (!priv->tx_traffic) | ||
1435 | return; | ||
1436 | |||
1437 | fc = header->frame_control; | ||
1438 | if (ieee80211_is_data(fc)) { | ||
1439 | len = (length > IWL_TRAFFIC_ENTRY_SIZE) | ||
1440 | ? IWL_TRAFFIC_ENTRY_SIZE : length; | ||
1441 | memcpy((priv->tx_traffic + | ||
1442 | (priv->tx_traffic_idx * IWL_TRAFFIC_ENTRY_SIZE)), | ||
1443 | header, len); | ||
1444 | priv->tx_traffic_idx = | ||
1445 | (priv->tx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES; | ||
1446 | } | ||
1447 | } | ||
1448 | |||
1449 | void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv, | ||
1450 | u16 length, struct ieee80211_hdr *header) | ||
1451 | { | ||
1452 | __le16 fc; | ||
1453 | u16 len; | ||
1454 | |||
1455 | if (likely(!(iwl_debug_level & IWL_DL_RX))) | ||
1456 | return; | ||
1457 | |||
1458 | if (!priv->rx_traffic) | ||
1459 | return; | ||
1460 | |||
1461 | fc = header->frame_control; | ||
1462 | if (ieee80211_is_data(fc)) { | ||
1463 | len = (length > IWL_TRAFFIC_ENTRY_SIZE) | ||
1464 | ? IWL_TRAFFIC_ENTRY_SIZE : length; | ||
1465 | memcpy((priv->rx_traffic + | ||
1466 | (priv->rx_traffic_idx * IWL_TRAFFIC_ENTRY_SIZE)), | ||
1467 | header, len); | ||
1468 | priv->rx_traffic_idx = | ||
1469 | (priv->rx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES; | ||
1470 | } | ||
1471 | } | ||
1472 | |||
1473 | const char *get_mgmt_string(int cmd) | ||
1474 | { | ||
1475 | switch (cmd) { | ||
1476 | IWL_CMD(MANAGEMENT_ASSOC_REQ); | ||
1477 | IWL_CMD(MANAGEMENT_ASSOC_RESP); | ||
1478 | IWL_CMD(MANAGEMENT_REASSOC_REQ); | ||
1479 | IWL_CMD(MANAGEMENT_REASSOC_RESP); | ||
1480 | IWL_CMD(MANAGEMENT_PROBE_REQ); | ||
1481 | IWL_CMD(MANAGEMENT_PROBE_RESP); | ||
1482 | IWL_CMD(MANAGEMENT_BEACON); | ||
1483 | IWL_CMD(MANAGEMENT_ATIM); | ||
1484 | IWL_CMD(MANAGEMENT_DISASSOC); | ||
1485 | IWL_CMD(MANAGEMENT_AUTH); | ||
1486 | IWL_CMD(MANAGEMENT_DEAUTH); | ||
1487 | IWL_CMD(MANAGEMENT_ACTION); | ||
1488 | default: | ||
1489 | return "UNKNOWN"; | ||
1490 | |||
1491 | } | ||
1492 | } | ||
1493 | |||
1494 | const char *get_ctrl_string(int cmd) | ||
1495 | { | ||
1496 | switch (cmd) { | ||
1497 | IWL_CMD(CONTROL_BACK_REQ); | ||
1498 | IWL_CMD(CONTROL_BACK); | ||
1499 | IWL_CMD(CONTROL_PSPOLL); | ||
1500 | IWL_CMD(CONTROL_RTS); | ||
1501 | IWL_CMD(CONTROL_CTS); | ||
1502 | IWL_CMD(CONTROL_ACK); | ||
1503 | IWL_CMD(CONTROL_CFEND); | ||
1504 | IWL_CMD(CONTROL_CFENDACK); | ||
1505 | default: | ||
1506 | return "UNKNOWN"; | ||
1507 | |||
1508 | } | ||
1509 | } | ||
1510 | |||
1511 | void iwl_clear_traffic_stats(struct iwl_priv *priv) | ||
1512 | { | ||
1513 | memset(&priv->tx_stats, 0, sizeof(struct traffic_stats)); | ||
1514 | memset(&priv->rx_stats, 0, sizeof(struct traffic_stats)); | ||
1515 | } | ||
1516 | |||
1517 | /* | ||
1518 | * if CONFIG_IWLWIFI_DEBUGFS defined, iwl_update_stats function will | ||
1519 | * record all the MGMT, CTRL and DATA pkt for both TX and Rx pass. | ||
1520 | * Use debugFs to display the rx/rx_statistics | ||
1521 | * if CONFIG_IWLWIFI_DEBUGFS not being defined, then no MGMT and CTRL | ||
1522 | * information will be recorded, but DATA pkt still will be recorded | ||
1523 | * for the reason of iwl_led.c need to control the led blinking based on | ||
1524 | * number of tx and rx data. | ||
1525 | * | ||
1526 | */ | ||
1527 | void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len) | ||
1528 | { | ||
1529 | struct traffic_stats *stats; | ||
1530 | |||
1531 | if (is_tx) | ||
1532 | stats = &priv->tx_stats; | ||
1533 | else | ||
1534 | stats = &priv->rx_stats; | ||
1535 | |||
1536 | if (ieee80211_is_mgmt(fc)) { | ||
1537 | switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { | ||
1538 | case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ): | ||
1539 | stats->mgmt[MANAGEMENT_ASSOC_REQ]++; | ||
1540 | break; | ||
1541 | case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP): | ||
1542 | stats->mgmt[MANAGEMENT_ASSOC_RESP]++; | ||
1543 | break; | ||
1544 | case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ): | ||
1545 | stats->mgmt[MANAGEMENT_REASSOC_REQ]++; | ||
1546 | break; | ||
1547 | case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP): | ||
1548 | stats->mgmt[MANAGEMENT_REASSOC_RESP]++; | ||
1549 | break; | ||
1550 | case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ): | ||
1551 | stats->mgmt[MANAGEMENT_PROBE_REQ]++; | ||
1552 | break; | ||
1553 | case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP): | ||
1554 | stats->mgmt[MANAGEMENT_PROBE_RESP]++; | ||
1555 | break; | ||
1556 | case cpu_to_le16(IEEE80211_STYPE_BEACON): | ||
1557 | stats->mgmt[MANAGEMENT_BEACON]++; | ||
1558 | break; | ||
1559 | case cpu_to_le16(IEEE80211_STYPE_ATIM): | ||
1560 | stats->mgmt[MANAGEMENT_ATIM]++; | ||
1561 | break; | ||
1562 | case cpu_to_le16(IEEE80211_STYPE_DISASSOC): | ||
1563 | stats->mgmt[MANAGEMENT_DISASSOC]++; | ||
1564 | break; | ||
1565 | case cpu_to_le16(IEEE80211_STYPE_AUTH): | ||
1566 | stats->mgmt[MANAGEMENT_AUTH]++; | ||
1567 | break; | ||
1568 | case cpu_to_le16(IEEE80211_STYPE_DEAUTH): | ||
1569 | stats->mgmt[MANAGEMENT_DEAUTH]++; | ||
1570 | break; | ||
1571 | case cpu_to_le16(IEEE80211_STYPE_ACTION): | ||
1572 | stats->mgmt[MANAGEMENT_ACTION]++; | ||
1573 | break; | ||
1574 | } | ||
1575 | } else if (ieee80211_is_ctl(fc)) { | ||
1576 | switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { | ||
1577 | case cpu_to_le16(IEEE80211_STYPE_BACK_REQ): | ||
1578 | stats->ctrl[CONTROL_BACK_REQ]++; | ||
1579 | break; | ||
1580 | case cpu_to_le16(IEEE80211_STYPE_BACK): | ||
1581 | stats->ctrl[CONTROL_BACK]++; | ||
1582 | break; | ||
1583 | case cpu_to_le16(IEEE80211_STYPE_PSPOLL): | ||
1584 | stats->ctrl[CONTROL_PSPOLL]++; | ||
1585 | break; | ||
1586 | case cpu_to_le16(IEEE80211_STYPE_RTS): | ||
1587 | stats->ctrl[CONTROL_RTS]++; | ||
1588 | break; | ||
1589 | case cpu_to_le16(IEEE80211_STYPE_CTS): | ||
1590 | stats->ctrl[CONTROL_CTS]++; | ||
1591 | break; | ||
1592 | case cpu_to_le16(IEEE80211_STYPE_ACK): | ||
1593 | stats->ctrl[CONTROL_ACK]++; | ||
1594 | break; | ||
1595 | case cpu_to_le16(IEEE80211_STYPE_CFEND): | ||
1596 | stats->ctrl[CONTROL_CFEND]++; | ||
1597 | break; | ||
1598 | case cpu_to_le16(IEEE80211_STYPE_CFENDACK): | ||
1599 | stats->ctrl[CONTROL_CFENDACK]++; | ||
1600 | break; | ||
1601 | } | ||
1602 | } else { | ||
1603 | /* data */ | ||
1604 | stats->data_cnt++; | ||
1605 | stats->data_bytes += len; | ||
1606 | } | ||
1607 | } | ||
1608 | #endif | ||
1609 | |||
1610 | static void iwl_force_rf_reset(struct iwl_priv *priv) | ||
1611 | { | ||
1612 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | ||
1613 | return; | ||
1614 | |||
1615 | if (!iwl_is_any_associated(priv)) { | ||
1616 | IWL_DEBUG_SCAN(priv, "force reset rejected: not associated\n"); | ||
1617 | return; | ||
1618 | } | ||
1619 | /* | ||
1620 | * There is no easy and better way to force reset the radio, | ||
1621 | * the only known method is switching channel which will force to | ||
1622 | * reset and tune the radio. | ||
1623 | * Use internal short scan (single channel) operation to should | ||
1624 | * achieve this objective. | ||
1625 | * Driver should reset the radio when number of consecutive missed | ||
1626 | * beacon, or any other uCode error condition detected. | ||
1627 | */ | ||
1628 | IWL_DEBUG_INFO(priv, "perform radio reset.\n"); | ||
1629 | iwl_internal_short_hw_scan(priv); | ||
1630 | } | ||
1631 | |||
1632 | |||
1633 | int iwl_force_reset(struct iwl_priv *priv, int mode, bool external) | ||
1634 | { | ||
1635 | struct iwl_force_reset *force_reset; | ||
1636 | |||
1637 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | ||
1638 | return -EINVAL; | ||
1639 | |||
1640 | if (mode >= IWL_MAX_FORCE_RESET) { | ||
1641 | IWL_DEBUG_INFO(priv, "invalid reset request.\n"); | ||
1642 | return -EINVAL; | ||
1643 | } | ||
1644 | force_reset = &priv->force_reset[mode]; | ||
1645 | force_reset->reset_request_count++; | ||
1646 | if (!external) { | ||
1647 | if (force_reset->last_force_reset_jiffies && | ||
1648 | time_after(force_reset->last_force_reset_jiffies + | ||
1649 | force_reset->reset_duration, jiffies)) { | ||
1650 | IWL_DEBUG_INFO(priv, "force reset rejected\n"); | ||
1651 | force_reset->reset_reject_count++; | ||
1652 | return -EAGAIN; | ||
1653 | } | ||
1654 | } | ||
1655 | force_reset->reset_success_count++; | ||
1656 | force_reset->last_force_reset_jiffies = jiffies; | ||
1657 | IWL_DEBUG_INFO(priv, "perform force reset (%d)\n", mode); | ||
1658 | switch (mode) { | ||
1659 | case IWL_RF_RESET: | ||
1660 | iwl_force_rf_reset(priv); | ||
1661 | break; | ||
1662 | case IWL_FW_RESET: | ||
1663 | /* | ||
1664 | * if the request is from external(ex: debugfs), | ||
1665 | * then always perform the request in regardless the module | ||
1666 | * parameter setting | ||
1667 | * if the request is from internal (uCode error or driver | ||
1668 | * detect failure), then fw_restart module parameter | ||
1669 | * need to be check before performing firmware reload | ||
1670 | */ | ||
1671 | if (!external && !iwlagn_mod_params.restart_fw) { | ||
1672 | IWL_DEBUG_INFO(priv, "Cancel firmware reload based on " | ||
1673 | "module parameter setting\n"); | ||
1674 | break; | ||
1675 | } | ||
1676 | IWL_ERR(priv, "On demand firmware reload\n"); | ||
1677 | iwlagn_fw_error(priv, true); | ||
1678 | break; | ||
1679 | } | ||
1680 | return 0; | ||
1681 | } | ||
1682 | |||
1683 | int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | ||
1684 | enum nl80211_iftype newtype, bool newp2p) | ||
1685 | { | ||
1686 | struct iwl_priv *priv = hw->priv; | ||
1687 | struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); | ||
1688 | struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | ||
1689 | struct iwl_rxon_context *tmp; | ||
1690 | enum nl80211_iftype newviftype = newtype; | ||
1691 | u32 interface_modes; | ||
1692 | int err; | ||
1693 | |||
1694 | newtype = ieee80211_iftype_p2p(newtype, newp2p); | ||
1695 | |||
1696 | mutex_lock(&priv->mutex); | ||
1697 | |||
1698 | if (!ctx->vif || !iwl_is_ready_rf(priv)) { | ||
1699 | /* | ||
1700 | * Huh? But wait ... this can maybe happen when | ||
1701 | * we're in the middle of a firmware restart! | ||
1702 | */ | ||
1703 | err = -EBUSY; | ||
1704 | goto out; | ||
1705 | } | ||
1706 | |||
1707 | interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes; | ||
1708 | |||
1709 | if (!(interface_modes & BIT(newtype))) { | ||
1710 | err = -EBUSY; | ||
1711 | goto out; | ||
1712 | } | ||
1713 | |||
1714 | /* | ||
1715 | * Refuse a change that should be done by moving from the PAN | ||
1716 | * context to the BSS context instead, if the BSS context is | ||
1717 | * available and can support the new interface type. | ||
1718 | */ | ||
1719 | if (ctx->ctxid == IWL_RXON_CTX_PAN && !bss_ctx->vif && | ||
1720 | (bss_ctx->interface_modes & BIT(newtype) || | ||
1721 | bss_ctx->exclusive_interface_modes & BIT(newtype))) { | ||
1722 | BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); | ||
1723 | err = -EBUSY; | ||
1724 | goto out; | ||
1725 | } | ||
1726 | |||
1727 | if (ctx->exclusive_interface_modes & BIT(newtype)) { | ||
1728 | for_each_context(priv, tmp) { | ||
1729 | if (ctx == tmp) | ||
1730 | continue; | ||
1731 | |||
1732 | if (!tmp->vif) | ||
1733 | continue; | ||
1734 | |||
1735 | /* | ||
1736 | * The current mode switch would be exclusive, but | ||
1737 | * another context is active ... refuse the switch. | ||
1738 | */ | ||
1739 | err = -EBUSY; | ||
1740 | goto out; | ||
1741 | } | ||
1742 | } | ||
1743 | |||
1744 | /* success */ | ||
1745 | iwl_teardown_interface(priv, vif, true); | ||
1746 | vif->type = newviftype; | ||
1747 | vif->p2p = newp2p; | ||
1748 | err = iwl_setup_interface(priv, ctx); | ||
1749 | WARN_ON(err); | ||
1750 | /* | ||
1751 | * We've switched internally, but submitting to the | ||
1752 | * device may have failed for some reason. Mask this | ||
1753 | * error, because otherwise mac80211 will not switch | ||
1754 | * (and set the interface type back) and we'll be | ||
1755 | * out of sync with it. | ||
1756 | */ | ||
1757 | err = 0; | ||
1758 | |||
1759 | out: | ||
1760 | mutex_unlock(&priv->mutex); | ||
1761 | return err; | ||
1762 | } | ||
1763 | |||
1764 | /* | ||
1765 | * On every watchdog tick we check (latest) time stamp. If it does not | ||
1766 | * change during timeout period and queue is not empty we reset firmware. | ||
1767 | */ | ||
1768 | static int iwl_check_stuck_queue(struct iwl_priv *priv, int cnt) | ||
1769 | { | ||
1770 | struct iwl_tx_queue *txq = &priv->txq[cnt]; | ||
1771 | struct iwl_queue *q = &txq->q; | ||
1772 | unsigned long timeout; | ||
1773 | int ret; | ||
1774 | |||
1775 | if (q->read_ptr == q->write_ptr) { | ||
1776 | txq->time_stamp = jiffies; | ||
1777 | return 0; | ||
1778 | } | ||
1779 | |||
1780 | timeout = txq->time_stamp + | ||
1781 | msecs_to_jiffies(priv->cfg->base_params->wd_timeout); | ||
1782 | |||
1783 | if (time_after(jiffies, timeout)) { | ||
1784 | IWL_ERR(priv, "Queue %d stuck for %u ms.\n", | ||
1785 | q->id, priv->cfg->base_params->wd_timeout); | ||
1786 | ret = iwl_force_reset(priv, IWL_FW_RESET, false); | ||
1787 | return (ret == -EAGAIN) ? 0 : 1; | ||
1788 | } | ||
1789 | |||
1790 | return 0; | ||
1791 | } | ||
1792 | |||
1793 | /* | ||
1794 | * Making watchdog tick be a quarter of timeout assure we will | ||
1795 | * discover the queue hung between timeout and 1.25*timeout | ||
1796 | */ | ||
1797 | #define IWL_WD_TICK(timeout) ((timeout) / 4) | ||
1798 | |||
1799 | /* | ||
1800 | * Watchdog timer callback, we check each tx queue for stuck, if if hung | ||
1801 | * we reset the firmware. If everything is fine just rearm the timer. | ||
1802 | */ | ||
1803 | void iwl_bg_watchdog(unsigned long data) | ||
1804 | { | ||
1805 | struct iwl_priv *priv = (struct iwl_priv *)data; | ||
1806 | int cnt; | ||
1807 | unsigned long timeout; | ||
1808 | |||
1809 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | ||
1810 | return; | ||
1811 | |||
1812 | timeout = priv->cfg->base_params->wd_timeout; | ||
1813 | if (timeout == 0) | ||
1814 | return; | ||
1815 | |||
1816 | /* monitor and check for stuck cmd queue */ | ||
1817 | if (iwl_check_stuck_queue(priv, priv->cmd_queue)) | ||
1818 | return; | ||
1819 | |||
1820 | /* monitor and check for other stuck queues */ | ||
1821 | if (iwl_is_any_associated(priv)) { | ||
1822 | for (cnt = 0; cnt < priv->hw_params.max_txq_num; cnt++) { | ||
1823 | /* skip as we already checked the command queue */ | ||
1824 | if (cnt == priv->cmd_queue) | ||
1825 | continue; | ||
1826 | if (iwl_check_stuck_queue(priv, cnt)) | ||
1827 | return; | ||
1828 | } | ||
1829 | } | ||
1830 | |||
1831 | mod_timer(&priv->watchdog, jiffies + | ||
1832 | msecs_to_jiffies(IWL_WD_TICK(timeout))); | ||
1833 | } | ||
1834 | |||
1835 | void iwl_setup_watchdog(struct iwl_priv *priv) | ||
1836 | { | ||
1837 | unsigned int timeout = priv->cfg->base_params->wd_timeout; | ||
1838 | |||
1839 | if (timeout && !iwlagn_mod_params.wd_disable) | ||
1840 | mod_timer(&priv->watchdog, | ||
1841 | jiffies + msecs_to_jiffies(IWL_WD_TICK(timeout))); | ||
1842 | else | ||
1843 | del_timer(&priv->watchdog); | ||
1844 | } | ||
1845 | |||
1846 | /* | ||
1847 | * extended beacon time format | ||
1848 | * time in usec will be changed into a 32-bit value in extended:internal format | ||
1849 | * the extended part is the beacon counts | ||
1850 | * the internal part is the time in usec within one beacon interval | ||
1851 | */ | ||
1852 | u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval) | ||
1853 | { | ||
1854 | u32 quot; | ||
1855 | u32 rem; | ||
1856 | u32 interval = beacon_interval * TIME_UNIT; | ||
1857 | |||
1858 | if (!interval || !usec) | ||
1859 | return 0; | ||
1860 | |||
1861 | quot = (usec / interval) & | ||
1862 | (iwl_beacon_time_mask_high(priv, | ||
1863 | priv->hw_params.beacon_time_tsf_bits) >> | ||
1864 | priv->hw_params.beacon_time_tsf_bits); | ||
1865 | rem = (usec % interval) & iwl_beacon_time_mask_low(priv, | ||
1866 | priv->hw_params.beacon_time_tsf_bits); | ||
1867 | |||
1868 | return (quot << priv->hw_params.beacon_time_tsf_bits) + rem; | ||
1869 | } | ||
1870 | |||
1871 | /* base is usually what we get from ucode with each received frame, | ||
1872 | * the same as HW timer counter counting down | ||
1873 | */ | ||
1874 | __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base, | ||
1875 | u32 addon, u32 beacon_interval) | ||
1876 | { | ||
1877 | u32 base_low = base & iwl_beacon_time_mask_low(priv, | ||
1878 | priv->hw_params.beacon_time_tsf_bits); | ||
1879 | u32 addon_low = addon & iwl_beacon_time_mask_low(priv, | ||
1880 | priv->hw_params.beacon_time_tsf_bits); | ||
1881 | u32 interval = beacon_interval * TIME_UNIT; | ||
1882 | u32 res = (base & iwl_beacon_time_mask_high(priv, | ||
1883 | priv->hw_params.beacon_time_tsf_bits)) + | ||
1884 | (addon & iwl_beacon_time_mask_high(priv, | ||
1885 | priv->hw_params.beacon_time_tsf_bits)); | ||
1886 | |||
1887 | if (base_low > addon_low) | ||
1888 | res += base_low - addon_low; | ||
1889 | else if (base_low < addon_low) { | ||
1890 | res += interval + base_low - addon_low; | ||
1891 | res += (1 << priv->hw_params.beacon_time_tsf_bits); | ||
1892 | } else | ||
1893 | res += (1 << priv->hw_params.beacon_time_tsf_bits); | ||
1894 | |||
1895 | return cpu_to_le32(res); | ||
1896 | } | ||
1897 | |||
1898 | #ifdef CONFIG_PM | ||
1899 | |||
1900 | int iwl_suspend(struct iwl_priv *priv) | ||
1901 | { | ||
1902 | /* | ||
1903 | * This function is called when system goes into suspend state | ||
1904 | * mac80211 will call iwl_mac_stop() from the mac80211 suspend function | ||
1905 | * first but since iwl_mac_stop() has no knowledge of who the caller is, | ||
1906 | * it will not call apm_ops.stop() to stop the DMA operation. | ||
1907 | * Calling apm_ops.stop here to make sure we stop the DMA. | ||
1908 | * | ||
1909 | * But of course ... if we have configured WoWLAN then we did other | ||
1910 | * things already :-) | ||
1911 | */ | ||
1912 | if (!priv->wowlan) | ||
1913 | iwl_apm_stop(priv); | ||
1914 | |||
1915 | return 0; | ||
1916 | } | ||
1917 | |||
1918 | int iwl_resume(struct iwl_priv *priv) | ||
1919 | { | ||
1920 | bool hw_rfkill = false; | ||
1921 | |||
1922 | iwl_enable_interrupts(priv); | ||
1923 | |||
1924 | if (!(iwl_read32(priv, CSR_GP_CNTRL) & | ||
1925 | CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) | ||
1926 | hw_rfkill = true; | ||
1927 | |||
1928 | if (hw_rfkill) | ||
1929 | set_bit(STATUS_RF_KILL_HW, &priv->status); | ||
1930 | else | ||
1931 | clear_bit(STATUS_RF_KILL_HW, &priv->status); | ||
1932 | |||
1933 | wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rfkill); | ||
1934 | |||
1935 | return 0; | ||
1936 | } | ||
1937 | |||
1938 | #endif /* CONFIG_PM */ | ||