diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/iwl4965-base.c')
-rw-r--r-- | drivers/net/wireless/iwlegacy/iwl4965-base.c | 3282 |
1 files changed, 3282 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c new file mode 100644 index 00000000000..aa0c2539761 --- /dev/null +++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c | |||
@@ -0,0 +1,3282 @@ | |||
1 | /****************************************************************************** | ||
2 | * | ||
3 | * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. | ||
4 | * | ||
5 | * Portions of this file are derived from the ipw3945 project, as well | ||
6 | * as portions of the ieee80211 subsystem header files. | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or modify it | ||
9 | * under the terms of version 2 of the GNU General Public License as | ||
10 | * published by the Free Software Foundation. | ||
11 | * | ||
12 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
13 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
14 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
15 | * more details. | ||
16 | * | ||
17 | * You should have received a copy of the GNU General Public License along with | ||
18 | * this program; if not, write to the Free Software Foundation, Inc., | ||
19 | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA | ||
20 | * | ||
21 | * The full GNU General Public License is included in this distribution in the | ||
22 | * file called LICENSE. | ||
23 | * | ||
24 | * Contact Information: | ||
25 | * Intel Linux Wireless <ilw@linux.intel.com> | ||
26 | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | ||
27 | * | ||
28 | *****************************************************************************/ | ||
29 | |||
30 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | ||
31 | |||
32 | #include <linux/kernel.h> | ||
33 | #include <linux/module.h> | ||
34 | #include <linux/init.h> | ||
35 | #include <linux/pci.h> | ||
36 | #include <linux/pci-aspm.h> | ||
37 | #include <linux/slab.h> | ||
38 | #include <linux/dma-mapping.h> | ||
39 | #include <linux/delay.h> | ||
40 | #include <linux/sched.h> | ||
41 | #include <linux/skbuff.h> | ||
42 | #include <linux/netdevice.h> | ||
43 | #include <linux/wireless.h> | ||
44 | #include <linux/firmware.h> | ||
45 | #include <linux/etherdevice.h> | ||
46 | #include <linux/if_arp.h> | ||
47 | |||
48 | #include <net/mac80211.h> | ||
49 | |||
50 | #include <asm/div64.h> | ||
51 | |||
52 | #define DRV_NAME "iwl4965" | ||
53 | |||
54 | #include "iwl-eeprom.h" | ||
55 | #include "iwl-dev.h" | ||
56 | #include "iwl-core.h" | ||
57 | #include "iwl-io.h" | ||
58 | #include "iwl-helpers.h" | ||
59 | #include "iwl-sta.h" | ||
60 | #include "iwl-4965-calib.h" | ||
61 | #include "iwl-4965.h" | ||
62 | #include "iwl-4965-led.h" | ||
63 | |||
64 | |||
65 | /****************************************************************************** | ||
66 | * | ||
67 | * module boiler plate | ||
68 | * | ||
69 | ******************************************************************************/ | ||
70 | |||
71 | /* | ||
72 | * module name, copyright, version, etc. | ||
73 | */ | ||
74 | #define DRV_DESCRIPTION "Intel(R) Wireless WiFi 4965 driver for Linux" | ||
75 | |||
76 | #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG | ||
77 | #define VD "d" | ||
78 | #else | ||
79 | #define VD | ||
80 | #endif | ||
81 | |||
82 | #define DRV_VERSION IWLWIFI_VERSION VD | ||
83 | |||
84 | |||
85 | MODULE_DESCRIPTION(DRV_DESCRIPTION); | ||
86 | MODULE_VERSION(DRV_VERSION); | ||
87 | MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); | ||
88 | MODULE_LICENSE("GPL"); | ||
89 | MODULE_ALIAS("iwl4965"); | ||
90 | |||
91 | void iwl4965_update_chain_flags(struct iwl_priv *priv) | ||
92 | { | ||
93 | struct iwl_rxon_context *ctx; | ||
94 | |||
95 | if (priv->cfg->ops->hcmd->set_rxon_chain) { | ||
96 | for_each_context(priv, ctx) { | ||
97 | priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); | ||
98 | if (ctx->active.rx_chain != ctx->staging.rx_chain) | ||
99 | iwl_legacy_commit_rxon(priv, ctx); | ||
100 | } | ||
101 | } | ||
102 | } | ||
103 | |||
104 | static void iwl4965_clear_free_frames(struct iwl_priv *priv) | ||
105 | { | ||
106 | struct list_head *element; | ||
107 | |||
108 | IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n", | ||
109 | priv->frames_count); | ||
110 | |||
111 | while (!list_empty(&priv->free_frames)) { | ||
112 | element = priv->free_frames.next; | ||
113 | list_del(element); | ||
114 | kfree(list_entry(element, struct iwl_frame, list)); | ||
115 | priv->frames_count--; | ||
116 | } | ||
117 | |||
118 | if (priv->frames_count) { | ||
119 | IWL_WARN(priv, "%d frames still in use. Did we lose one?\n", | ||
120 | priv->frames_count); | ||
121 | priv->frames_count = 0; | ||
122 | } | ||
123 | } | ||
124 | |||
125 | static struct iwl_frame *iwl4965_get_free_frame(struct iwl_priv *priv) | ||
126 | { | ||
127 | struct iwl_frame *frame; | ||
128 | struct list_head *element; | ||
129 | if (list_empty(&priv->free_frames)) { | ||
130 | frame = kzalloc(sizeof(*frame), GFP_KERNEL); | ||
131 | if (!frame) { | ||
132 | IWL_ERR(priv, "Could not allocate frame!\n"); | ||
133 | return NULL; | ||
134 | } | ||
135 | |||
136 | priv->frames_count++; | ||
137 | return frame; | ||
138 | } | ||
139 | |||
140 | element = priv->free_frames.next; | ||
141 | list_del(element); | ||
142 | return list_entry(element, struct iwl_frame, list); | ||
143 | } | ||
144 | |||
145 | static void iwl4965_free_frame(struct iwl_priv *priv, struct iwl_frame *frame) | ||
146 | { | ||
147 | memset(frame, 0, sizeof(*frame)); | ||
148 | list_add(&frame->list, &priv->free_frames); | ||
149 | } | ||
150 | |||
151 | static u32 iwl4965_fill_beacon_frame(struct iwl_priv *priv, | ||
152 | struct ieee80211_hdr *hdr, | ||
153 | int left) | ||
154 | { | ||
155 | lockdep_assert_held(&priv->mutex); | ||
156 | |||
157 | if (!priv->beacon_skb) | ||
158 | return 0; | ||
159 | |||
160 | if (priv->beacon_skb->len > left) | ||
161 | return 0; | ||
162 | |||
163 | memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len); | ||
164 | |||
165 | return priv->beacon_skb->len; | ||
166 | } | ||
167 | |||
168 | /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ | ||
169 | static void iwl4965_set_beacon_tim(struct iwl_priv *priv, | ||
170 | struct iwl_tx_beacon_cmd *tx_beacon_cmd, | ||
171 | u8 *beacon, u32 frame_size) | ||
172 | { | ||
173 | u16 tim_idx; | ||
174 | struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; | ||
175 | |||
176 | /* | ||
177 | * The index is relative to frame start but we start looking at the | ||
178 | * variable-length part of the beacon. | ||
179 | */ | ||
180 | tim_idx = mgmt->u.beacon.variable - beacon; | ||
181 | |||
182 | /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ | ||
183 | while ((tim_idx < (frame_size - 2)) && | ||
184 | (beacon[tim_idx] != WLAN_EID_TIM)) | ||
185 | tim_idx += beacon[tim_idx+1] + 2; | ||
186 | |||
187 | /* If TIM field was found, set variables */ | ||
188 | if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { | ||
189 | tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); | ||
190 | tx_beacon_cmd->tim_size = beacon[tim_idx+1]; | ||
191 | } else | ||
192 | IWL_WARN(priv, "Unable to find TIM Element in beacon\n"); | ||
193 | } | ||
194 | |||
195 | static unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, | ||
196 | struct iwl_frame *frame) | ||
197 | { | ||
198 | struct iwl_tx_beacon_cmd *tx_beacon_cmd; | ||
199 | u32 frame_size; | ||
200 | u32 rate_flags; | ||
201 | u32 rate; | ||
202 | /* | ||
203 | * We have to set up the TX command, the TX Beacon command, and the | ||
204 | * beacon contents. | ||
205 | */ | ||
206 | |||
207 | lockdep_assert_held(&priv->mutex); | ||
208 | |||
209 | if (!priv->beacon_ctx) { | ||
210 | IWL_ERR(priv, "trying to build beacon w/o beacon context!\n"); | ||
211 | return 0; | ||
212 | } | ||
213 | |||
214 | /* Initialize memory */ | ||
215 | tx_beacon_cmd = &frame->u.beacon; | ||
216 | memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); | ||
217 | |||
218 | /* Set up TX beacon contents */ | ||
219 | frame_size = iwl4965_fill_beacon_frame(priv, tx_beacon_cmd->frame, | ||
220 | sizeof(frame->u) - sizeof(*tx_beacon_cmd)); | ||
221 | if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE)) | ||
222 | return 0; | ||
223 | if (!frame_size) | ||
224 | return 0; | ||
225 | |||
226 | /* Set up TX command fields */ | ||
227 | tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); | ||
228 | tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id; | ||
229 | tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; | ||
230 | tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | | ||
231 | TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK; | ||
232 | |||
233 | /* Set up TX beacon command fields */ | ||
234 | iwl4965_set_beacon_tim(priv, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame, | ||
235 | frame_size); | ||
236 | |||
237 | /* Set up packet rate and flags */ | ||
238 | rate = iwl_legacy_get_lowest_plcp(priv, priv->beacon_ctx); | ||
239 | priv->mgmt_tx_ant = iwl4965_toggle_tx_ant(priv, priv->mgmt_tx_ant, | ||
240 | priv->hw_params.valid_tx_ant); | ||
241 | rate_flags = iwl4965_ant_idx_to_flags(priv->mgmt_tx_ant); | ||
242 | if ((rate >= IWL_FIRST_CCK_RATE) && (rate <= IWL_LAST_CCK_RATE)) | ||
243 | rate_flags |= RATE_MCS_CCK_MSK; | ||
244 | tx_beacon_cmd->tx.rate_n_flags = iwl4965_hw_set_rate_n_flags(rate, | ||
245 | rate_flags); | ||
246 | |||
247 | return sizeof(*tx_beacon_cmd) + frame_size; | ||
248 | } | ||
249 | |||
250 | int iwl4965_send_beacon_cmd(struct iwl_priv *priv) | ||
251 | { | ||
252 | struct iwl_frame *frame; | ||
253 | unsigned int frame_size; | ||
254 | int rc; | ||
255 | |||
256 | frame = iwl4965_get_free_frame(priv); | ||
257 | if (!frame) { | ||
258 | IWL_ERR(priv, "Could not obtain free frame buffer for beacon " | ||
259 | "command.\n"); | ||
260 | return -ENOMEM; | ||
261 | } | ||
262 | |||
263 | frame_size = iwl4965_hw_get_beacon_cmd(priv, frame); | ||
264 | if (!frame_size) { | ||
265 | IWL_ERR(priv, "Error configuring the beacon command\n"); | ||
266 | iwl4965_free_frame(priv, frame); | ||
267 | return -EINVAL; | ||
268 | } | ||
269 | |||
270 | rc = iwl_legacy_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size, | ||
271 | &frame->u.cmd[0]); | ||
272 | |||
273 | iwl4965_free_frame(priv, frame); | ||
274 | |||
275 | return rc; | ||
276 | } | ||
277 | |||
278 | static inline dma_addr_t iwl4965_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx) | ||
279 | { | ||
280 | struct iwl_tfd_tb *tb = &tfd->tbs[idx]; | ||
281 | |||
282 | dma_addr_t addr = get_unaligned_le32(&tb->lo); | ||
283 | if (sizeof(dma_addr_t) > sizeof(u32)) | ||
284 | addr |= | ||
285 | ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16; | ||
286 | |||
287 | return addr; | ||
288 | } | ||
289 | |||
290 | static inline u16 iwl4965_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx) | ||
291 | { | ||
292 | struct iwl_tfd_tb *tb = &tfd->tbs[idx]; | ||
293 | |||
294 | return le16_to_cpu(tb->hi_n_len) >> 4; | ||
295 | } | ||
296 | |||
297 | static inline void iwl4965_tfd_set_tb(struct iwl_tfd *tfd, u8 idx, | ||
298 | dma_addr_t addr, u16 len) | ||
299 | { | ||
300 | struct iwl_tfd_tb *tb = &tfd->tbs[idx]; | ||
301 | u16 hi_n_len = len << 4; | ||
302 | |||
303 | put_unaligned_le32(addr, &tb->lo); | ||
304 | if (sizeof(dma_addr_t) > sizeof(u32)) | ||
305 | hi_n_len |= ((addr >> 16) >> 16) & 0xF; | ||
306 | |||
307 | tb->hi_n_len = cpu_to_le16(hi_n_len); | ||
308 | |||
309 | tfd->num_tbs = idx + 1; | ||
310 | } | ||
311 | |||
312 | static inline u8 iwl4965_tfd_get_num_tbs(struct iwl_tfd *tfd) | ||
313 | { | ||
314 | return tfd->num_tbs & 0x1f; | ||
315 | } | ||
316 | |||
317 | /** | ||
318 | * iwl4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr] | ||
319 | * @priv - driver private data | ||
320 | * @txq - tx queue | ||
321 | * | ||
322 | * Does NOT advance any TFD circular buffer read/write indexes | ||
323 | * Does NOT free the TFD itself (which is within circular buffer) | ||
324 | */ | ||
325 | void iwl4965_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) | ||
326 | { | ||
327 | struct iwl_tfd *tfd_tmp = (struct iwl_tfd *)txq->tfds; | ||
328 | struct iwl_tfd *tfd; | ||
329 | struct pci_dev *dev = priv->pci_dev; | ||
330 | int index = txq->q.read_ptr; | ||
331 | int i; | ||
332 | int num_tbs; | ||
333 | |||
334 | tfd = &tfd_tmp[index]; | ||
335 | |||
336 | /* Sanity check on number of chunks */ | ||
337 | num_tbs = iwl4965_tfd_get_num_tbs(tfd); | ||
338 | |||
339 | if (num_tbs >= IWL_NUM_OF_TBS) { | ||
340 | IWL_ERR(priv, "Too many chunks: %i\n", num_tbs); | ||
341 | /* @todo issue fatal error, it is quite serious situation */ | ||
342 | return; | ||
343 | } | ||
344 | |||
345 | /* Unmap tx_cmd */ | ||
346 | if (num_tbs) | ||
347 | pci_unmap_single(dev, | ||
348 | dma_unmap_addr(&txq->meta[index], mapping), | ||
349 | dma_unmap_len(&txq->meta[index], len), | ||
350 | PCI_DMA_BIDIRECTIONAL); | ||
351 | |||
352 | /* Unmap chunks, if any. */ | ||
353 | for (i = 1; i < num_tbs; i++) | ||
354 | pci_unmap_single(dev, iwl4965_tfd_tb_get_addr(tfd, i), | ||
355 | iwl4965_tfd_tb_get_len(tfd, i), | ||
356 | PCI_DMA_TODEVICE); | ||
357 | |||
358 | /* free SKB */ | ||
359 | if (txq->txb) { | ||
360 | struct sk_buff *skb; | ||
361 | |||
362 | skb = txq->txb[txq->q.read_ptr].skb; | ||
363 | |||
364 | /* can be called from irqs-disabled context */ | ||
365 | if (skb) { | ||
366 | dev_kfree_skb_any(skb); | ||
367 | txq->txb[txq->q.read_ptr].skb = NULL; | ||
368 | } | ||
369 | } | ||
370 | } | ||
371 | |||
372 | int iwl4965_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, | ||
373 | struct iwl_tx_queue *txq, | ||
374 | dma_addr_t addr, u16 len, | ||
375 | u8 reset, u8 pad) | ||
376 | { | ||
377 | struct iwl_queue *q; | ||
378 | struct iwl_tfd *tfd, *tfd_tmp; | ||
379 | u32 num_tbs; | ||
380 | |||
381 | q = &txq->q; | ||
382 | tfd_tmp = (struct iwl_tfd *)txq->tfds; | ||
383 | tfd = &tfd_tmp[q->write_ptr]; | ||
384 | |||
385 | if (reset) | ||
386 | memset(tfd, 0, sizeof(*tfd)); | ||
387 | |||
388 | num_tbs = iwl4965_tfd_get_num_tbs(tfd); | ||
389 | |||
390 | /* Each TFD can point to a maximum 20 Tx buffers */ | ||
391 | if (num_tbs >= IWL_NUM_OF_TBS) { | ||
392 | IWL_ERR(priv, "Error can not send more than %d chunks\n", | ||
393 | IWL_NUM_OF_TBS); | ||
394 | return -EINVAL; | ||
395 | } | ||
396 | |||
397 | BUG_ON(addr & ~DMA_BIT_MASK(36)); | ||
398 | if (unlikely(addr & ~IWL_TX_DMA_MASK)) | ||
399 | IWL_ERR(priv, "Unaligned address = %llx\n", | ||
400 | (unsigned long long)addr); | ||
401 | |||
402 | iwl4965_tfd_set_tb(tfd, num_tbs, addr, len); | ||
403 | |||
404 | return 0; | ||
405 | } | ||
406 | |||
407 | /* | ||
408 | * Tell nic where to find circular buffer of Tx Frame Descriptors for | ||
409 | * given Tx queue, and enable the DMA channel used for that queue. | ||
410 | * | ||
411 | * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA | ||
412 | * channels supported in hardware. | ||
413 | */ | ||
414 | int iwl4965_hw_tx_queue_init(struct iwl_priv *priv, | ||
415 | struct iwl_tx_queue *txq) | ||
416 | { | ||
417 | int txq_id = txq->q.id; | ||
418 | |||
419 | /* Circular buffer (TFD queue in DRAM) physical base address */ | ||
420 | iwl_legacy_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id), | ||
421 | txq->q.dma_addr >> 8); | ||
422 | |||
423 | return 0; | ||
424 | } | ||
425 | |||
426 | /****************************************************************************** | ||
427 | * | ||
428 | * Generic RX handler implementations | ||
429 | * | ||
430 | ******************************************************************************/ | ||
431 | static void iwl4965_rx_reply_alive(struct iwl_priv *priv, | ||
432 | struct iwl_rx_mem_buffer *rxb) | ||
433 | { | ||
434 | struct iwl_rx_packet *pkt = rxb_addr(rxb); | ||
435 | struct iwl_alive_resp *palive; | ||
436 | struct delayed_work *pwork; | ||
437 | |||
438 | palive = &pkt->u.alive_frame; | ||
439 | |||
440 | IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision " | ||
441 | "0x%01X 0x%01X\n", | ||
442 | palive->is_valid, palive->ver_type, | ||
443 | palive->ver_subtype); | ||
444 | |||
445 | if (palive->ver_subtype == INITIALIZE_SUBTYPE) { | ||
446 | IWL_DEBUG_INFO(priv, "Initialization Alive received.\n"); | ||
447 | memcpy(&priv->card_alive_init, | ||
448 | &pkt->u.alive_frame, | ||
449 | sizeof(struct iwl_init_alive_resp)); | ||
450 | pwork = &priv->init_alive_start; | ||
451 | } else { | ||
452 | IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); | ||
453 | memcpy(&priv->card_alive, &pkt->u.alive_frame, | ||
454 | sizeof(struct iwl_alive_resp)); | ||
455 | pwork = &priv->alive_start; | ||
456 | } | ||
457 | |||
458 | /* We delay the ALIVE response by 5ms to | ||
459 | * give the HW RF Kill time to activate... */ | ||
460 | if (palive->is_valid == UCODE_VALID_OK) | ||
461 | queue_delayed_work(priv->workqueue, pwork, | ||
462 | msecs_to_jiffies(5)); | ||
463 | else | ||
464 | IWL_WARN(priv, "uCode did not respond OK.\n"); | ||
465 | } | ||
466 | |||
467 | /** | ||
468 | * iwl4965_bg_statistics_periodic - Timer callback to queue statistics | ||
469 | * | ||
470 | * This callback is provided in order to send a statistics request. | ||
471 | * | ||
472 | * This timer function is continually reset to execute within | ||
473 | * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION | ||
474 | * was received. We need to ensure we receive the statistics in order | ||
475 | * to update the temperature used for calibrating the TXPOWER. | ||
476 | */ | ||
477 | static void iwl4965_bg_statistics_periodic(unsigned long data) | ||
478 | { | ||
479 | struct iwl_priv *priv = (struct iwl_priv *)data; | ||
480 | |||
481 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | ||
482 | return; | ||
483 | |||
484 | /* dont send host command if rf-kill is on */ | ||
485 | if (!iwl_legacy_is_ready_rf(priv)) | ||
486 | return; | ||
487 | |||
488 | iwl_legacy_send_statistics_request(priv, CMD_ASYNC, false); | ||
489 | } | ||
490 | |||
491 | static void iwl4965_rx_beacon_notif(struct iwl_priv *priv, | ||
492 | struct iwl_rx_mem_buffer *rxb) | ||
493 | { | ||
494 | struct iwl_rx_packet *pkt = rxb_addr(rxb); | ||
495 | struct iwl4965_beacon_notif *beacon = | ||
496 | (struct iwl4965_beacon_notif *)pkt->u.raw; | ||
497 | #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG | ||
498 | u8 rate = iwl4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); | ||
499 | |||
500 | IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d " | ||
501 | "tsf %d %d rate %d\n", | ||
502 | le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, | ||
503 | beacon->beacon_notify_hdr.failure_frame, | ||
504 | le32_to_cpu(beacon->ibss_mgr_status), | ||
505 | le32_to_cpu(beacon->high_tsf), | ||
506 | le32_to_cpu(beacon->low_tsf), rate); | ||
507 | #endif | ||
508 | |||
509 | priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); | ||
510 | } | ||
511 | |||
512 | static void iwl4965_perform_ct_kill_task(struct iwl_priv *priv) | ||
513 | { | ||
514 | unsigned long flags; | ||
515 | |||
516 | IWL_DEBUG_POWER(priv, "Stop all queues\n"); | ||
517 | |||
518 | if (priv->mac80211_registered) | ||
519 | ieee80211_stop_queues(priv->hw); | ||
520 | |||
521 | iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, | ||
522 | CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); | ||
523 | iwl_read32(priv, CSR_UCODE_DRV_GP1); | ||
524 | |||
525 | spin_lock_irqsave(&priv->reg_lock, flags); | ||
526 | if (!iwl_grab_nic_access(priv)) | ||
527 | iwl_release_nic_access(priv); | ||
528 | spin_unlock_irqrestore(&priv->reg_lock, flags); | ||
529 | } | ||
530 | |||
531 | /* Handle notification from uCode that card's power state is changing | ||
532 | * due to software, hardware, or critical temperature RFKILL */ | ||
533 | static void iwl4965_rx_card_state_notif(struct iwl_priv *priv, | ||
534 | struct iwl_rx_mem_buffer *rxb) | ||
535 | { | ||
536 | struct iwl_rx_packet *pkt = rxb_addr(rxb); | ||
537 | u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); | ||
538 | unsigned long status = priv->status; | ||
539 | |||
540 | IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n", | ||
541 | (flags & HW_CARD_DISABLED) ? "Kill" : "On", | ||
542 | (flags & SW_CARD_DISABLED) ? "Kill" : "On", | ||
543 | (flags & CT_CARD_DISABLED) ? | ||
544 | "Reached" : "Not reached"); | ||
545 | |||
546 | if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | | ||
547 | CT_CARD_DISABLED)) { | ||
548 | |||
549 | iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, | ||
550 | CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); | ||
551 | |||
552 | iwl_legacy_write_direct32(priv, HBUS_TARG_MBX_C, | ||
553 | HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); | ||
554 | |||
555 | if (!(flags & RXON_CARD_DISABLED)) { | ||
556 | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, | ||
557 | CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); | ||
558 | iwl_legacy_write_direct32(priv, HBUS_TARG_MBX_C, | ||
559 | HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); | ||
560 | } | ||
561 | } | ||
562 | |||
563 | if (flags & CT_CARD_DISABLED) | ||
564 | iwl4965_perform_ct_kill_task(priv); | ||
565 | |||
566 | if (flags & HW_CARD_DISABLED) | ||
567 | set_bit(STATUS_RF_KILL_HW, &priv->status); | ||
568 | else | ||
569 | clear_bit(STATUS_RF_KILL_HW, &priv->status); | ||
570 | |||
571 | if (!(flags & RXON_CARD_DISABLED)) | ||
572 | iwl_legacy_scan_cancel(priv); | ||
573 | |||
574 | if ((test_bit(STATUS_RF_KILL_HW, &status) != | ||
575 | test_bit(STATUS_RF_KILL_HW, &priv->status))) | ||
576 | wiphy_rfkill_set_hw_state(priv->hw->wiphy, | ||
577 | test_bit(STATUS_RF_KILL_HW, &priv->status)); | ||
578 | else | ||
579 | wake_up(&priv->wait_command_queue); | ||
580 | } | ||
581 | |||
582 | /** | ||
583 | * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks | ||
584 | * | ||
585 | * Setup the RX handlers for each of the reply types sent from the uCode | ||
586 | * to the host. | ||
587 | * | ||
588 | * This function chains into the hardware specific files for them to setup | ||
589 | * any hardware specific handlers as well. | ||
590 | */ | ||
591 | static void iwl4965_setup_rx_handlers(struct iwl_priv *priv) | ||
592 | { | ||
593 | priv->rx_handlers[REPLY_ALIVE] = iwl4965_rx_reply_alive; | ||
594 | priv->rx_handlers[REPLY_ERROR] = iwl_legacy_rx_reply_error; | ||
595 | priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_legacy_rx_csa; | ||
596 | priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] = | ||
597 | iwl_legacy_rx_spectrum_measure_notif; | ||
598 | priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_legacy_rx_pm_sleep_notif; | ||
599 | priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] = | ||
600 | iwl_legacy_rx_pm_debug_statistics_notif; | ||
601 | priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif; | ||
602 | |||
603 | /* | ||
604 | * The same handler is used for both the REPLY to a discrete | ||
605 | * statistics request from the host as well as for the periodic | ||
606 | * statistics notifications (after received beacons) from the uCode. | ||
607 | */ | ||
608 | priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl4965_reply_statistics; | ||
609 | priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl4965_rx_statistics; | ||
610 | |||
611 | iwl_legacy_setup_rx_scan_handlers(priv); | ||
612 | |||
613 | /* status change handler */ | ||
614 | priv->rx_handlers[CARD_STATE_NOTIFICATION] = | ||
615 | iwl4965_rx_card_state_notif; | ||
616 | |||
617 | priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] = | ||
618 | iwl4965_rx_missed_beacon_notif; | ||
619 | /* Rx handlers */ | ||
620 | priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl4965_rx_reply_rx_phy; | ||
621 | priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl4965_rx_reply_rx; | ||
622 | /* block ack */ | ||
623 | priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl4965_rx_reply_compressed_ba; | ||
624 | /* Set up hardware specific Rx handlers */ | ||
625 | priv->cfg->ops->lib->rx_handler_setup(priv); | ||
626 | } | ||
627 | |||
628 | /** | ||
629 | * iwl4965_rx_handle - Main entry function for receiving responses from uCode | ||
630 | * | ||
631 | * Uses the priv->rx_handlers callback function array to invoke | ||
632 | * the appropriate handlers, including command responses, | ||
633 | * frame-received notifications, and other notifications. | ||
634 | */ | ||
635 | void iwl4965_rx_handle(struct iwl_priv *priv) | ||
636 | { | ||
637 | struct iwl_rx_mem_buffer *rxb; | ||
638 | struct iwl_rx_packet *pkt; | ||
639 | struct iwl_rx_queue *rxq = &priv->rxq; | ||
640 | u32 r, i; | ||
641 | int reclaim; | ||
642 | unsigned long flags; | ||
643 | u8 fill_rx = 0; | ||
644 | u32 count = 8; | ||
645 | int total_empty; | ||
646 | |||
647 | /* uCode's read index (stored in shared DRAM) indicates the last Rx | ||
648 | * buffer that the driver may process (last buffer filled by ucode). */ | ||
649 | r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; | ||
650 | i = rxq->read; | ||
651 | |||
652 | /* Rx interrupt, but nothing sent from uCode */ | ||
653 | if (i == r) | ||
654 | IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i); | ||
655 | |||
656 | /* calculate total frames need to be restock after handling RX */ | ||
657 | total_empty = r - rxq->write_actual; | ||
658 | if (total_empty < 0) | ||
659 | total_empty += RX_QUEUE_SIZE; | ||
660 | |||
661 | if (total_empty > (RX_QUEUE_SIZE / 2)) | ||
662 | fill_rx = 1; | ||
663 | |||
664 | while (i != r) { | ||
665 | int len; | ||
666 | |||
667 | rxb = rxq->queue[i]; | ||
668 | |||
669 | /* If an RXB doesn't have a Rx queue slot associated with it, | ||
670 | * then a bug has been introduced in the queue refilling | ||
671 | * routines -- catch it here */ | ||
672 | BUG_ON(rxb == NULL); | ||
673 | |||
674 | rxq->queue[i] = NULL; | ||
675 | |||
676 | pci_unmap_page(priv->pci_dev, rxb->page_dma, | ||
677 | PAGE_SIZE << priv->hw_params.rx_page_order, | ||
678 | PCI_DMA_FROMDEVICE); | ||
679 | pkt = rxb_addr(rxb); | ||
680 | |||
681 | len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; | ||
682 | len += sizeof(u32); /* account for status word */ | ||
683 | trace_iwlwifi_legacy_dev_rx(priv, pkt, len); | ||
684 | |||
685 | /* Reclaim a command buffer only if this packet is a response | ||
686 | * to a (driver-originated) command. | ||
687 | * If the packet (e.g. Rx frame) originated from uCode, | ||
688 | * there is no command buffer to reclaim. | ||
689 | * Ucode should set SEQ_RX_FRAME bit if ucode-originated, | ||
690 | * but apparently a few don't get set; catch them here. */ | ||
691 | reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && | ||
692 | (pkt->hdr.cmd != REPLY_RX_PHY_CMD) && | ||
693 | (pkt->hdr.cmd != REPLY_RX) && | ||
694 | (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) && | ||
695 | (pkt->hdr.cmd != REPLY_COMPRESSED_BA) && | ||
696 | (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && | ||
697 | (pkt->hdr.cmd != REPLY_TX); | ||
698 | |||
699 | /* Based on type of command response or notification, | ||
700 | * handle those that need handling via function in | ||
701 | * rx_handlers table. See iwl4965_setup_rx_handlers() */ | ||
702 | if (priv->rx_handlers[pkt->hdr.cmd]) { | ||
703 | IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, | ||
704 | i, iwl_legacy_get_cmd_string(pkt->hdr.cmd), | ||
705 | pkt->hdr.cmd); | ||
706 | priv->isr_stats.rx_handlers[pkt->hdr.cmd]++; | ||
707 | priv->rx_handlers[pkt->hdr.cmd] (priv, rxb); | ||
708 | } else { | ||
709 | /* No handling needed */ | ||
710 | IWL_DEBUG_RX(priv, | ||
711 | "r %d i %d No handler needed for %s, 0x%02x\n", | ||
712 | r, i, iwl_legacy_get_cmd_string(pkt->hdr.cmd), | ||
713 | pkt->hdr.cmd); | ||
714 | } | ||
715 | |||
716 | /* | ||
717 | * XXX: After here, we should always check rxb->page | ||
718 | * against NULL before touching it or its virtual | ||
719 | * memory (pkt). Because some rx_handler might have | ||
720 | * already taken or freed the pages. | ||
721 | */ | ||
722 | |||
723 | if (reclaim) { | ||
724 | /* Invoke any callbacks, transfer the buffer to caller, | ||
725 | * and fire off the (possibly) blocking iwl_legacy_send_cmd() | ||
726 | * as we reclaim the driver command queue */ | ||
727 | if (rxb->page) | ||
728 | iwl_legacy_tx_cmd_complete(priv, rxb); | ||
729 | else | ||
730 | IWL_WARN(priv, "Claim null rxb?\n"); | ||
731 | } | ||
732 | |||
733 | /* Reuse the page if possible. For notification packets and | ||
734 | * SKBs that fail to Rx correctly, add them back into the | ||
735 | * rx_free list for reuse later. */ | ||
736 | spin_lock_irqsave(&rxq->lock, flags); | ||
737 | if (rxb->page != NULL) { | ||
738 | rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page, | ||
739 | 0, PAGE_SIZE << priv->hw_params.rx_page_order, | ||
740 | PCI_DMA_FROMDEVICE); | ||
741 | list_add_tail(&rxb->list, &rxq->rx_free); | ||
742 | rxq->free_count++; | ||
743 | } else | ||
744 | list_add_tail(&rxb->list, &rxq->rx_used); | ||
745 | |||
746 | spin_unlock_irqrestore(&rxq->lock, flags); | ||
747 | |||
748 | i = (i + 1) & RX_QUEUE_MASK; | ||
749 | /* If there are a lot of unused frames, | ||
750 | * restock the Rx queue so ucode wont assert. */ | ||
751 | if (fill_rx) { | ||
752 | count++; | ||
753 | if (count >= 8) { | ||
754 | rxq->read = i; | ||
755 | iwl4965_rx_replenish_now(priv); | ||
756 | count = 0; | ||
757 | } | ||
758 | } | ||
759 | } | ||
760 | |||
761 | /* Backtrack one entry */ | ||
762 | rxq->read = i; | ||
763 | if (fill_rx) | ||
764 | iwl4965_rx_replenish_now(priv); | ||
765 | else | ||
766 | iwl4965_rx_queue_restock(priv); | ||
767 | } | ||
768 | |||
769 | /* call this function to flush any scheduled tasklet */ | ||
770 | static inline void iwl4965_synchronize_irq(struct iwl_priv *priv) | ||
771 | { | ||
772 | /* wait to make sure we flush pending tasklet*/ | ||
773 | synchronize_irq(priv->pci_dev->irq); | ||
774 | tasklet_kill(&priv->irq_tasklet); | ||
775 | } | ||
776 | |||
777 | static void iwl4965_irq_tasklet(struct iwl_priv *priv) | ||
778 | { | ||
779 | u32 inta, handled = 0; | ||
780 | u32 inta_fh; | ||
781 | unsigned long flags; | ||
782 | u32 i; | ||
783 | #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG | ||
784 | u32 inta_mask; | ||
785 | #endif | ||
786 | |||
787 | spin_lock_irqsave(&priv->lock, flags); | ||
788 | |||
789 | /* Ack/clear/reset pending uCode interrupts. | ||
790 | * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, | ||
791 | * and will clear only when CSR_FH_INT_STATUS gets cleared. */ | ||
792 | inta = iwl_read32(priv, CSR_INT); | ||
793 | iwl_write32(priv, CSR_INT, inta); | ||
794 | |||
795 | /* Ack/clear/reset pending flow-handler (DMA) interrupts. | ||
796 | * Any new interrupts that happen after this, either while we're | ||
797 | * in this tasklet, or later, will show up in next ISR/tasklet. */ | ||
798 | inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); | ||
799 | iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh); | ||
800 | |||
801 | #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG | ||
802 | if (iwl_legacy_get_debug_level(priv) & IWL_DL_ISR) { | ||
803 | /* just for debug */ | ||
804 | inta_mask = iwl_read32(priv, CSR_INT_MASK); | ||
805 | IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", | ||
806 | inta, inta_mask, inta_fh); | ||
807 | } | ||
808 | #endif | ||
809 | |||
810 | spin_unlock_irqrestore(&priv->lock, flags); | ||
811 | |||
812 | /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not | ||
813 | * atomic, make sure that inta covers all the interrupts that | ||
814 | * we've discovered, even if FH interrupt came in just after | ||
815 | * reading CSR_INT. */ | ||
816 | if (inta_fh & CSR49_FH_INT_RX_MASK) | ||
817 | inta |= CSR_INT_BIT_FH_RX; | ||
818 | if (inta_fh & CSR49_FH_INT_TX_MASK) | ||
819 | inta |= CSR_INT_BIT_FH_TX; | ||
820 | |||
821 | /* Now service all interrupt bits discovered above. */ | ||
822 | if (inta & CSR_INT_BIT_HW_ERR) { | ||
823 | IWL_ERR(priv, "Hardware error detected. Restarting.\n"); | ||
824 | |||
825 | /* Tell the device to stop sending interrupts */ | ||
826 | iwl_legacy_disable_interrupts(priv); | ||
827 | |||
828 | priv->isr_stats.hw++; | ||
829 | iwl_legacy_irq_handle_error(priv); | ||
830 | |||
831 | handled |= CSR_INT_BIT_HW_ERR; | ||
832 | |||
833 | return; | ||
834 | } | ||
835 | |||
836 | #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG | ||
837 | if (iwl_legacy_get_debug_level(priv) & (IWL_DL_ISR)) { | ||
838 | /* NIC fires this, but we don't use it, redundant with WAKEUP */ | ||
839 | if (inta & CSR_INT_BIT_SCD) { | ||
840 | IWL_DEBUG_ISR(priv, "Scheduler finished to transmit " | ||
841 | "the frame/frames.\n"); | ||
842 | priv->isr_stats.sch++; | ||
843 | } | ||
844 | |||
845 | /* Alive notification via Rx interrupt will do the real work */ | ||
846 | if (inta & CSR_INT_BIT_ALIVE) { | ||
847 | IWL_DEBUG_ISR(priv, "Alive interrupt\n"); | ||
848 | priv->isr_stats.alive++; | ||
849 | } | ||
850 | } | ||
851 | #endif | ||
852 | /* Safely ignore these bits for debug checks below */ | ||
853 | inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); | ||
854 | |||
855 | /* HW RF KILL switch toggled */ | ||
856 | if (inta & CSR_INT_BIT_RF_KILL) { | ||
857 | int hw_rf_kill = 0; | ||
858 | if (!(iwl_read32(priv, CSR_GP_CNTRL) & | ||
859 | CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) | ||
860 | hw_rf_kill = 1; | ||
861 | |||
862 | IWL_WARN(priv, "RF_KILL bit toggled to %s.\n", | ||
863 | hw_rf_kill ? "disable radio" : "enable radio"); | ||
864 | |||
865 | priv->isr_stats.rfkill++; | ||
866 | |||
867 | /* driver only loads ucode once setting the interface up. | ||
868 | * the driver allows loading the ucode even if the radio | ||
869 | * is killed. Hence update the killswitch state here. The | ||
870 | * rfkill handler will care about restarting if needed. | ||
871 | */ | ||
872 | if (!test_bit(STATUS_ALIVE, &priv->status)) { | ||
873 | if (hw_rf_kill) | ||
874 | set_bit(STATUS_RF_KILL_HW, &priv->status); | ||
875 | else | ||
876 | clear_bit(STATUS_RF_KILL_HW, &priv->status); | ||
877 | wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill); | ||
878 | } | ||
879 | |||
880 | handled |= CSR_INT_BIT_RF_KILL; | ||
881 | } | ||
882 | |||
883 | /* Chip got too hot and stopped itself */ | ||
884 | if (inta & CSR_INT_BIT_CT_KILL) { | ||
885 | IWL_ERR(priv, "Microcode CT kill error detected.\n"); | ||
886 | priv->isr_stats.ctkill++; | ||
887 | handled |= CSR_INT_BIT_CT_KILL; | ||
888 | } | ||
889 | |||
890 | /* Error detected by uCode */ | ||
891 | if (inta & CSR_INT_BIT_SW_ERR) { | ||
892 | IWL_ERR(priv, "Microcode SW error detected. " | ||
893 | " Restarting 0x%X.\n", inta); | ||
894 | priv->isr_stats.sw++; | ||
895 | iwl_legacy_irq_handle_error(priv); | ||
896 | handled |= CSR_INT_BIT_SW_ERR; | ||
897 | } | ||
898 | |||
899 | /* | ||
900 | * uCode wakes up after power-down sleep. | ||
901 | * Tell device about any new tx or host commands enqueued, | ||
902 | * and about any Rx buffers made available while asleep. | ||
903 | */ | ||
904 | if (inta & CSR_INT_BIT_WAKEUP) { | ||
905 | IWL_DEBUG_ISR(priv, "Wakeup interrupt\n"); | ||
906 | iwl_legacy_rx_queue_update_write_ptr(priv, &priv->rxq); | ||
907 | for (i = 0; i < priv->hw_params.max_txq_num; i++) | ||
908 | iwl_legacy_txq_update_write_ptr(priv, &priv->txq[i]); | ||
909 | priv->isr_stats.wakeup++; | ||
910 | handled |= CSR_INT_BIT_WAKEUP; | ||
911 | } | ||
912 | |||
913 | /* All uCode command responses, including Tx command responses, | ||
914 | * Rx "responses" (frame-received notification), and other | ||
915 | * notifications from uCode come through here*/ | ||
916 | if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { | ||
917 | iwl4965_rx_handle(priv); | ||
918 | priv->isr_stats.rx++; | ||
919 | handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); | ||
920 | } | ||
921 | |||
922 | /* This "Tx" DMA channel is used only for loading uCode */ | ||
923 | if (inta & CSR_INT_BIT_FH_TX) { | ||
924 | IWL_DEBUG_ISR(priv, "uCode load interrupt\n"); | ||
925 | priv->isr_stats.tx++; | ||
926 | handled |= CSR_INT_BIT_FH_TX; | ||
927 | /* Wake up uCode load routine, now that load is complete */ | ||
928 | priv->ucode_write_complete = 1; | ||
929 | wake_up(&priv->wait_command_queue); | ||
930 | } | ||
931 | |||
932 | if (inta & ~handled) { | ||
933 | IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled); | ||
934 | priv->isr_stats.unhandled++; | ||
935 | } | ||
936 | |||
937 | if (inta & ~(priv->inta_mask)) { | ||
938 | IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n", | ||
939 | inta & ~priv->inta_mask); | ||
940 | IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh); | ||
941 | } | ||
942 | |||
943 | /* Re-enable all interrupts */ | ||
944 | /* only Re-enable if disabled by irq */ | ||
945 | if (test_bit(STATUS_INT_ENABLED, &priv->status)) | ||
946 | iwl_legacy_enable_interrupts(priv); | ||
947 | /* Re-enable RF_KILL if it occurred */ | ||
948 | else if (handled & CSR_INT_BIT_RF_KILL) | ||
949 | iwl_legacy_enable_rfkill_int(priv); | ||
950 | |||
951 | #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG | ||
952 | if (iwl_legacy_get_debug_level(priv) & (IWL_DL_ISR)) { | ||
953 | inta = iwl_read32(priv, CSR_INT); | ||
954 | inta_mask = iwl_read32(priv, CSR_INT_MASK); | ||
955 | inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); | ||
956 | IWL_DEBUG_ISR(priv, | ||
957 | "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " | ||
958 | "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); | ||
959 | } | ||
960 | #endif | ||
961 | } | ||
962 | |||
963 | /***************************************************************************** | ||
964 | * | ||
965 | * sysfs attributes | ||
966 | * | ||
967 | *****************************************************************************/ | ||
968 | |||
969 | #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG | ||
970 | |||
971 | /* | ||
972 | * The following adds a new attribute to the sysfs representation | ||
973 | * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/) | ||
974 | * used for controlling the debug level. | ||
975 | * | ||
976 | * See the level definitions in iwl for details. | ||
977 | * | ||
978 | * The debug_level being managed using sysfs below is a per device debug | ||
979 | * level that is used instead of the global debug level if it (the per | ||
980 | * device debug level) is set. | ||
981 | */ | ||
982 | static ssize_t iwl4965_show_debug_level(struct device *d, | ||
983 | struct device_attribute *attr, char *buf) | ||
984 | { | ||
985 | struct iwl_priv *priv = dev_get_drvdata(d); | ||
986 | return sprintf(buf, "0x%08X\n", iwl_legacy_get_debug_level(priv)); | ||
987 | } | ||
988 | static ssize_t iwl4965_store_debug_level(struct device *d, | ||
989 | struct device_attribute *attr, | ||
990 | const char *buf, size_t count) | ||
991 | { | ||
992 | struct iwl_priv *priv = dev_get_drvdata(d); | ||
993 | unsigned long val; | ||
994 | int ret; | ||
995 | |||
996 | ret = strict_strtoul(buf, 0, &val); | ||
997 | if (ret) | ||
998 | IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf); | ||
999 | else { | ||
1000 | priv->debug_level = val; | ||
1001 | if (iwl_legacy_alloc_traffic_mem(priv)) | ||
1002 | IWL_ERR(priv, | ||
1003 | "Not enough memory to generate traffic log\n"); | ||
1004 | } | ||
1005 | return strnlen(buf, count); | ||
1006 | } | ||
1007 | |||
1008 | static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, | ||
1009 | iwl4965_show_debug_level, iwl4965_store_debug_level); | ||
1010 | |||
1011 | |||
1012 | #endif /* CONFIG_IWLWIFI_LEGACY_DEBUG */ | ||
1013 | |||
1014 | |||
1015 | static ssize_t iwl4965_show_temperature(struct device *d, | ||
1016 | struct device_attribute *attr, char *buf) | ||
1017 | { | ||
1018 | struct iwl_priv *priv = dev_get_drvdata(d); | ||
1019 | |||
1020 | if (!iwl_legacy_is_alive(priv)) | ||
1021 | return -EAGAIN; | ||
1022 | |||
1023 | return sprintf(buf, "%d\n", priv->temperature); | ||
1024 | } | ||
1025 | |||
1026 | static DEVICE_ATTR(temperature, S_IRUGO, iwl4965_show_temperature, NULL); | ||
1027 | |||
1028 | static ssize_t iwl4965_show_tx_power(struct device *d, | ||
1029 | struct device_attribute *attr, char *buf) | ||
1030 | { | ||
1031 | struct iwl_priv *priv = dev_get_drvdata(d); | ||
1032 | |||
1033 | if (!iwl_legacy_is_ready_rf(priv)) | ||
1034 | return sprintf(buf, "off\n"); | ||
1035 | else | ||
1036 | return sprintf(buf, "%d\n", priv->tx_power_user_lmt); | ||
1037 | } | ||
1038 | |||
1039 | static ssize_t iwl4965_store_tx_power(struct device *d, | ||
1040 | struct device_attribute *attr, | ||
1041 | const char *buf, size_t count) | ||
1042 | { | ||
1043 | struct iwl_priv *priv = dev_get_drvdata(d); | ||
1044 | unsigned long val; | ||
1045 | int ret; | ||
1046 | |||
1047 | ret = strict_strtoul(buf, 10, &val); | ||
1048 | if (ret) | ||
1049 | IWL_INFO(priv, "%s is not in decimal form.\n", buf); | ||
1050 | else { | ||
1051 | ret = iwl_legacy_set_tx_power(priv, val, false); | ||
1052 | if (ret) | ||
1053 | IWL_ERR(priv, "failed setting tx power (0x%d).\n", | ||
1054 | ret); | ||
1055 | else | ||
1056 | ret = count; | ||
1057 | } | ||
1058 | return ret; | ||
1059 | } | ||
1060 | |||
1061 | static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, | ||
1062 | iwl4965_show_tx_power, iwl4965_store_tx_power); | ||
1063 | |||
1064 | static struct attribute *iwl_sysfs_entries[] = { | ||
1065 | &dev_attr_temperature.attr, | ||
1066 | &dev_attr_tx_power.attr, | ||
1067 | #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG | ||
1068 | &dev_attr_debug_level.attr, | ||
1069 | #endif | ||
1070 | NULL | ||
1071 | }; | ||
1072 | |||
1073 | static struct attribute_group iwl_attribute_group = { | ||
1074 | .name = NULL, /* put in device directory */ | ||
1075 | .attrs = iwl_sysfs_entries, | ||
1076 | }; | ||
1077 | |||
1078 | /****************************************************************************** | ||
1079 | * | ||
1080 | * uCode download functions | ||
1081 | * | ||
1082 | ******************************************************************************/ | ||
1083 | |||
1084 | static void iwl4965_dealloc_ucode_pci(struct iwl_priv *priv) | ||
1085 | { | ||
1086 | iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_code); | ||
1087 | iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_data); | ||
1088 | iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup); | ||
1089 | iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_init); | ||
1090 | iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_init_data); | ||
1091 | iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_boot); | ||
1092 | } | ||
1093 | |||
1094 | static void iwl4965_nic_start(struct iwl_priv *priv) | ||
1095 | { | ||
1096 | /* Remove all resets to allow NIC to operate */ | ||
1097 | iwl_write32(priv, CSR_RESET, 0); | ||
1098 | } | ||
1099 | |||
1100 | static void iwl4965_ucode_callback(const struct firmware *ucode_raw, | ||
1101 | void *context); | ||
1102 | static int iwl4965_mac_setup_register(struct iwl_priv *priv, | ||
1103 | u32 max_probe_length); | ||
1104 | |||
1105 | static int __must_check iwl4965_request_firmware(struct iwl_priv *priv, bool first) | ||
1106 | { | ||
1107 | const char *name_pre = priv->cfg->fw_name_pre; | ||
1108 | char tag[8]; | ||
1109 | |||
1110 | if (first) { | ||
1111 | priv->fw_index = priv->cfg->ucode_api_max; | ||
1112 | sprintf(tag, "%d", priv->fw_index); | ||
1113 | } else { | ||
1114 | priv->fw_index--; | ||
1115 | sprintf(tag, "%d", priv->fw_index); | ||
1116 | } | ||
1117 | |||
1118 | if (priv->fw_index < priv->cfg->ucode_api_min) { | ||
1119 | IWL_ERR(priv, "no suitable firmware found!\n"); | ||
1120 | return -ENOENT; | ||
1121 | } | ||
1122 | |||
1123 | sprintf(priv->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); | ||
1124 | |||
1125 | IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n", | ||
1126 | priv->firmware_name); | ||
1127 | |||
1128 | return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name, | ||
1129 | &priv->pci_dev->dev, GFP_KERNEL, priv, | ||
1130 | iwl4965_ucode_callback); | ||
1131 | } | ||
1132 | |||
1133 | struct iwl4965_firmware_pieces { | ||
1134 | const void *inst, *data, *init, *init_data, *boot; | ||
1135 | size_t inst_size, data_size, init_size, init_data_size, boot_size; | ||
1136 | }; | ||
1137 | |||
1138 | static int iwl4965_load_firmware(struct iwl_priv *priv, | ||
1139 | const struct firmware *ucode_raw, | ||
1140 | struct iwl4965_firmware_pieces *pieces) | ||
1141 | { | ||
1142 | struct iwl_ucode_header *ucode = (void *)ucode_raw->data; | ||
1143 | u32 api_ver, hdr_size; | ||
1144 | const u8 *src; | ||
1145 | |||
1146 | priv->ucode_ver = le32_to_cpu(ucode->ver); | ||
1147 | api_ver = IWL_UCODE_API(priv->ucode_ver); | ||
1148 | |||
1149 | switch (api_ver) { | ||
1150 | default: | ||
1151 | case 0: | ||
1152 | case 1: | ||
1153 | case 2: | ||
1154 | hdr_size = 24; | ||
1155 | if (ucode_raw->size < hdr_size) { | ||
1156 | IWL_ERR(priv, "File size too small!\n"); | ||
1157 | return -EINVAL; | ||
1158 | } | ||
1159 | pieces->inst_size = le32_to_cpu(ucode->v1.inst_size); | ||
1160 | pieces->data_size = le32_to_cpu(ucode->v1.data_size); | ||
1161 | pieces->init_size = le32_to_cpu(ucode->v1.init_size); | ||
1162 | pieces->init_data_size = | ||
1163 | le32_to_cpu(ucode->v1.init_data_size); | ||
1164 | pieces->boot_size = le32_to_cpu(ucode->v1.boot_size); | ||
1165 | src = ucode->v1.data; | ||
1166 | break; | ||
1167 | } | ||
1168 | |||
1169 | /* Verify size of file vs. image size info in file's header */ | ||
1170 | if (ucode_raw->size != hdr_size + pieces->inst_size + | ||
1171 | pieces->data_size + pieces->init_size + | ||
1172 | pieces->init_data_size + pieces->boot_size) { | ||
1173 | |||
1174 | IWL_ERR(priv, | ||
1175 | "uCode file size %d does not match expected size\n", | ||
1176 | (int)ucode_raw->size); | ||
1177 | return -EINVAL; | ||
1178 | } | ||
1179 | |||
1180 | pieces->inst = src; | ||
1181 | src += pieces->inst_size; | ||
1182 | pieces->data = src; | ||
1183 | src += pieces->data_size; | ||
1184 | pieces->init = src; | ||
1185 | src += pieces->init_size; | ||
1186 | pieces->init_data = src; | ||
1187 | src += pieces->init_data_size; | ||
1188 | pieces->boot = src; | ||
1189 | src += pieces->boot_size; | ||
1190 | |||
1191 | return 0; | ||
1192 | } | ||
1193 | |||
1194 | /** | ||
1195 | * iwl4965_ucode_callback - callback when firmware was loaded | ||
1196 | * | ||
1197 | * If loaded successfully, copies the firmware into buffers | ||
1198 | * for the card to fetch (via DMA). | ||
1199 | */ | ||
1200 | static void | ||
1201 | iwl4965_ucode_callback(const struct firmware *ucode_raw, void *context) | ||
1202 | { | ||
1203 | struct iwl_priv *priv = context; | ||
1204 | struct iwl_ucode_header *ucode; | ||
1205 | int err; | ||
1206 | struct iwl4965_firmware_pieces pieces; | ||
1207 | const unsigned int api_max = priv->cfg->ucode_api_max; | ||
1208 | const unsigned int api_min = priv->cfg->ucode_api_min; | ||
1209 | u32 api_ver; | ||
1210 | |||
1211 | u32 max_probe_length = 200; | ||
1212 | u32 standard_phy_calibration_size = | ||
1213 | IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE; | ||
1214 | |||
1215 | memset(&pieces, 0, sizeof(pieces)); | ||
1216 | |||
1217 | if (!ucode_raw) { | ||
1218 | if (priv->fw_index <= priv->cfg->ucode_api_max) | ||
1219 | IWL_ERR(priv, | ||
1220 | "request for firmware file '%s' failed.\n", | ||
1221 | priv->firmware_name); | ||
1222 | goto try_again; | ||
1223 | } | ||
1224 | |||
1225 | IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n", | ||
1226 | priv->firmware_name, ucode_raw->size); | ||
1227 | |||
1228 | /* Make sure that we got at least the API version number */ | ||
1229 | if (ucode_raw->size < 4) { | ||
1230 | IWL_ERR(priv, "File size way too small!\n"); | ||
1231 | goto try_again; | ||
1232 | } | ||
1233 | |||
1234 | /* Data from ucode file: header followed by uCode images */ | ||
1235 | ucode = (struct iwl_ucode_header *)ucode_raw->data; | ||
1236 | |||
1237 | err = iwl4965_load_firmware(priv, ucode_raw, &pieces); | ||
1238 | |||
1239 | if (err) | ||
1240 | goto try_again; | ||
1241 | |||
1242 | api_ver = IWL_UCODE_API(priv->ucode_ver); | ||
1243 | |||
1244 | /* | ||
1245 | * api_ver should match the api version forming part of the | ||
1246 | * firmware filename ... but we don't check for that and only rely | ||
1247 | * on the API version read from firmware header from here on forward | ||
1248 | */ | ||
1249 | if (api_ver < api_min || api_ver > api_max) { | ||
1250 | IWL_ERR(priv, | ||
1251 | "Driver unable to support your firmware API. " | ||
1252 | "Driver supports v%u, firmware is v%u.\n", | ||
1253 | api_max, api_ver); | ||
1254 | goto try_again; | ||
1255 | } | ||
1256 | |||
1257 | if (api_ver != api_max) | ||
1258 | IWL_ERR(priv, | ||
1259 | "Firmware has old API version. Expected v%u, " | ||
1260 | "got v%u. New firmware can be obtained " | ||
1261 | "from http://www.intellinuxwireless.org.\n", | ||
1262 | api_max, api_ver); | ||
1263 | |||
1264 | IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n", | ||
1265 | IWL_UCODE_MAJOR(priv->ucode_ver), | ||
1266 | IWL_UCODE_MINOR(priv->ucode_ver), | ||
1267 | IWL_UCODE_API(priv->ucode_ver), | ||
1268 | IWL_UCODE_SERIAL(priv->ucode_ver)); | ||
1269 | |||
1270 | snprintf(priv->hw->wiphy->fw_version, | ||
1271 | sizeof(priv->hw->wiphy->fw_version), | ||
1272 | "%u.%u.%u.%u", | ||
1273 | IWL_UCODE_MAJOR(priv->ucode_ver), | ||
1274 | IWL_UCODE_MINOR(priv->ucode_ver), | ||
1275 | IWL_UCODE_API(priv->ucode_ver), | ||
1276 | IWL_UCODE_SERIAL(priv->ucode_ver)); | ||
1277 | |||
1278 | /* | ||
1279 | * For any of the failures below (before allocating pci memory) | ||
1280 | * we will try to load a version with a smaller API -- maybe the | ||
1281 | * user just got a corrupted version of the latest API. | ||
1282 | */ | ||
1283 | |||
1284 | IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n", | ||
1285 | priv->ucode_ver); | ||
1286 | IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %Zd\n", | ||
1287 | pieces.inst_size); | ||
1288 | IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %Zd\n", | ||
1289 | pieces.data_size); | ||
1290 | IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %Zd\n", | ||
1291 | pieces.init_size); | ||
1292 | IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %Zd\n", | ||
1293 | pieces.init_data_size); | ||
1294 | IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %Zd\n", | ||
1295 | pieces.boot_size); | ||
1296 | |||
1297 | /* Verify that uCode images will fit in card's SRAM */ | ||
1298 | if (pieces.inst_size > priv->hw_params.max_inst_size) { | ||
1299 | IWL_ERR(priv, "uCode instr len %Zd too large to fit in\n", | ||
1300 | pieces.inst_size); | ||
1301 | goto try_again; | ||
1302 | } | ||
1303 | |||
1304 | if (pieces.data_size > priv->hw_params.max_data_size) { | ||
1305 | IWL_ERR(priv, "uCode data len %Zd too large to fit in\n", | ||
1306 | pieces.data_size); | ||
1307 | goto try_again; | ||
1308 | } | ||
1309 | |||
1310 | if (pieces.init_size > priv->hw_params.max_inst_size) { | ||
1311 | IWL_ERR(priv, "uCode init instr len %Zd too large to fit in\n", | ||
1312 | pieces.init_size); | ||
1313 | goto try_again; | ||
1314 | } | ||
1315 | |||
1316 | if (pieces.init_data_size > priv->hw_params.max_data_size) { | ||
1317 | IWL_ERR(priv, "uCode init data len %Zd too large to fit in\n", | ||
1318 | pieces.init_data_size); | ||
1319 | goto try_again; | ||
1320 | } | ||
1321 | |||
1322 | if (pieces.boot_size > priv->hw_params.max_bsm_size) { | ||
1323 | IWL_ERR(priv, "uCode boot instr len %Zd too large to fit in\n", | ||
1324 | pieces.boot_size); | ||
1325 | goto try_again; | ||
1326 | } | ||
1327 | |||
1328 | /* Allocate ucode buffers for card's bus-master loading ... */ | ||
1329 | |||
1330 | /* Runtime instructions and 2 copies of data: | ||
1331 | * 1) unmodified from disk | ||
1332 | * 2) backup cache for save/restore during power-downs */ | ||
1333 | priv->ucode_code.len = pieces.inst_size; | ||
1334 | iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_code); | ||
1335 | |||
1336 | priv->ucode_data.len = pieces.data_size; | ||
1337 | iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_data); | ||
1338 | |||
1339 | priv->ucode_data_backup.len = pieces.data_size; | ||
1340 | iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); | ||
1341 | |||
1342 | if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr || | ||
1343 | !priv->ucode_data_backup.v_addr) | ||
1344 | goto err_pci_alloc; | ||
1345 | |||
1346 | /* Initialization instructions and data */ | ||
1347 | if (pieces.init_size && pieces.init_data_size) { | ||
1348 | priv->ucode_init.len = pieces.init_size; | ||
1349 | iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_init); | ||
1350 | |||
1351 | priv->ucode_init_data.len = pieces.init_data_size; | ||
1352 | iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data); | ||
1353 | |||
1354 | if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr) | ||
1355 | goto err_pci_alloc; | ||
1356 | } | ||
1357 | |||
1358 | /* Bootstrap (instructions only, no data) */ | ||
1359 | if (pieces.boot_size) { | ||
1360 | priv->ucode_boot.len = pieces.boot_size; | ||
1361 | iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot); | ||
1362 | |||
1363 | if (!priv->ucode_boot.v_addr) | ||
1364 | goto err_pci_alloc; | ||
1365 | } | ||
1366 | |||
1367 | /* Now that we can no longer fail, copy information */ | ||
1368 | |||
1369 | priv->sta_key_max_num = STA_KEY_MAX_NUM; | ||
1370 | |||
1371 | /* Copy images into buffers for card's bus-master reads ... */ | ||
1372 | |||
1373 | /* Runtime instructions (first block of data in file) */ | ||
1374 | IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n", | ||
1375 | pieces.inst_size); | ||
1376 | memcpy(priv->ucode_code.v_addr, pieces.inst, pieces.inst_size); | ||
1377 | |||
1378 | IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", | ||
1379 | priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr); | ||
1380 | |||
1381 | /* | ||
1382 | * Runtime data | ||
1383 | * NOTE: Copy into backup buffer will be done in iwl_up() | ||
1384 | */ | ||
1385 | IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n", | ||
1386 | pieces.data_size); | ||
1387 | memcpy(priv->ucode_data.v_addr, pieces.data, pieces.data_size); | ||
1388 | memcpy(priv->ucode_data_backup.v_addr, pieces.data, pieces.data_size); | ||
1389 | |||
1390 | /* Initialization instructions */ | ||
1391 | if (pieces.init_size) { | ||
1392 | IWL_DEBUG_INFO(priv, | ||
1393 | "Copying (but not loading) init instr len %Zd\n", | ||
1394 | pieces.init_size); | ||
1395 | memcpy(priv->ucode_init.v_addr, pieces.init, pieces.init_size); | ||
1396 | } | ||
1397 | |||
1398 | /* Initialization data */ | ||
1399 | if (pieces.init_data_size) { | ||
1400 | IWL_DEBUG_INFO(priv, | ||
1401 | "Copying (but not loading) init data len %Zd\n", | ||
1402 | pieces.init_data_size); | ||
1403 | memcpy(priv->ucode_init_data.v_addr, pieces.init_data, | ||
1404 | pieces.init_data_size); | ||
1405 | } | ||
1406 | |||
1407 | /* Bootstrap instructions */ | ||
1408 | IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", | ||
1409 | pieces.boot_size); | ||
1410 | memcpy(priv->ucode_boot.v_addr, pieces.boot, pieces.boot_size); | ||
1411 | |||
1412 | /* | ||
1413 | * figure out the offset of chain noise reset and gain commands | ||
1414 | * base on the size of standard phy calibration commands table size | ||
1415 | */ | ||
1416 | priv->_4965.phy_calib_chain_noise_reset_cmd = | ||
1417 | standard_phy_calibration_size; | ||
1418 | priv->_4965.phy_calib_chain_noise_gain_cmd = | ||
1419 | standard_phy_calibration_size + 1; | ||
1420 | |||
1421 | /************************************************** | ||
1422 | * This is still part of probe() in a sense... | ||
1423 | * | ||
1424 | * 9. Setup and register with mac80211 and debugfs | ||
1425 | **************************************************/ | ||
1426 | err = iwl4965_mac_setup_register(priv, max_probe_length); | ||
1427 | if (err) | ||
1428 | goto out_unbind; | ||
1429 | |||
1430 | err = iwl_legacy_dbgfs_register(priv, DRV_NAME); | ||
1431 | if (err) | ||
1432 | IWL_ERR(priv, | ||
1433 | "failed to create debugfs files. Ignoring error: %d\n", err); | ||
1434 | |||
1435 | err = sysfs_create_group(&priv->pci_dev->dev.kobj, | ||
1436 | &iwl_attribute_group); | ||
1437 | if (err) { | ||
1438 | IWL_ERR(priv, "failed to create sysfs device attributes\n"); | ||
1439 | goto out_unbind; | ||
1440 | } | ||
1441 | |||
1442 | /* We have our copies now, allow OS release its copies */ | ||
1443 | release_firmware(ucode_raw); | ||
1444 | complete(&priv->_4965.firmware_loading_complete); | ||
1445 | return; | ||
1446 | |||
1447 | try_again: | ||
1448 | /* try next, if any */ | ||
1449 | if (iwl4965_request_firmware(priv, false)) | ||
1450 | goto out_unbind; | ||
1451 | release_firmware(ucode_raw); | ||
1452 | return; | ||
1453 | |||
1454 | err_pci_alloc: | ||
1455 | IWL_ERR(priv, "failed to allocate pci memory\n"); | ||
1456 | iwl4965_dealloc_ucode_pci(priv); | ||
1457 | out_unbind: | ||
1458 | complete(&priv->_4965.firmware_loading_complete); | ||
1459 | device_release_driver(&priv->pci_dev->dev); | ||
1460 | release_firmware(ucode_raw); | ||
1461 | } | ||
1462 | |||
1463 | static const char * const desc_lookup_text[] = { | ||
1464 | "OK", | ||
1465 | "FAIL", | ||
1466 | "BAD_PARAM", | ||
1467 | "BAD_CHECKSUM", | ||
1468 | "NMI_INTERRUPT_WDG", | ||
1469 | "SYSASSERT", | ||
1470 | "FATAL_ERROR", | ||
1471 | "BAD_COMMAND", | ||
1472 | "HW_ERROR_TUNE_LOCK", | ||
1473 | "HW_ERROR_TEMPERATURE", | ||
1474 | "ILLEGAL_CHAN_FREQ", | ||
1475 | "VCC_NOT_STABLE", | ||
1476 | "FH_ERROR", | ||
1477 | "NMI_INTERRUPT_HOST", | ||
1478 | "NMI_INTERRUPT_ACTION_PT", | ||
1479 | "NMI_INTERRUPT_UNKNOWN", | ||
1480 | "UCODE_VERSION_MISMATCH", | ||
1481 | "HW_ERROR_ABS_LOCK", | ||
1482 | "HW_ERROR_CAL_LOCK_FAIL", | ||
1483 | "NMI_INTERRUPT_INST_ACTION_PT", | ||
1484 | "NMI_INTERRUPT_DATA_ACTION_PT", | ||
1485 | "NMI_TRM_HW_ER", | ||
1486 | "NMI_INTERRUPT_TRM", | ||
1487 | "NMI_INTERRUPT_BREAK_POINT", | ||
1488 | "DEBUG_0", | ||
1489 | "DEBUG_1", | ||
1490 | "DEBUG_2", | ||
1491 | "DEBUG_3", | ||
1492 | }; | ||
1493 | |||
1494 | static struct { char *name; u8 num; } advanced_lookup[] = { | ||
1495 | { "NMI_INTERRUPT_WDG", 0x34 }, | ||
1496 | { "SYSASSERT", 0x35 }, | ||
1497 | { "UCODE_VERSION_MISMATCH", 0x37 }, | ||
1498 | { "BAD_COMMAND", 0x38 }, | ||
1499 | { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C }, | ||
1500 | { "FATAL_ERROR", 0x3D }, | ||
1501 | { "NMI_TRM_HW_ERR", 0x46 }, | ||
1502 | { "NMI_INTERRUPT_TRM", 0x4C }, | ||
1503 | { "NMI_INTERRUPT_BREAK_POINT", 0x54 }, | ||
1504 | { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C }, | ||
1505 | { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 }, | ||
1506 | { "NMI_INTERRUPT_HOST", 0x66 }, | ||
1507 | { "NMI_INTERRUPT_ACTION_PT", 0x7C }, | ||
1508 | { "NMI_INTERRUPT_UNKNOWN", 0x84 }, | ||
1509 | { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 }, | ||
1510 | { "ADVANCED_SYSASSERT", 0 }, | ||
1511 | }; | ||
1512 | |||
1513 | static const char *iwl4965_desc_lookup(u32 num) | ||
1514 | { | ||
1515 | int i; | ||
1516 | int max = ARRAY_SIZE(desc_lookup_text); | ||
1517 | |||
1518 | if (num < max) | ||
1519 | return desc_lookup_text[num]; | ||
1520 | |||
1521 | max = ARRAY_SIZE(advanced_lookup) - 1; | ||
1522 | for (i = 0; i < max; i++) { | ||
1523 | if (advanced_lookup[i].num == num) | ||
1524 | break; | ||
1525 | } | ||
1526 | return advanced_lookup[i].name; | ||
1527 | } | ||
1528 | |||
1529 | #define ERROR_START_OFFSET (1 * sizeof(u32)) | ||
1530 | #define ERROR_ELEM_SIZE (7 * sizeof(u32)) | ||
1531 | |||
1532 | void iwl4965_dump_nic_error_log(struct iwl_priv *priv) | ||
1533 | { | ||
1534 | u32 data2, line; | ||
1535 | u32 desc, time, count, base, data1; | ||
1536 | u32 blink1, blink2, ilink1, ilink2; | ||
1537 | u32 pc, hcmd; | ||
1538 | |||
1539 | if (priv->ucode_type == UCODE_INIT) { | ||
1540 | base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr); | ||
1541 | } else { | ||
1542 | base = le32_to_cpu(priv->card_alive.error_event_table_ptr); | ||
1543 | } | ||
1544 | |||
1545 | if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { | ||
1546 | IWL_ERR(priv, | ||
1547 | "Not valid error log pointer 0x%08X for %s uCode\n", | ||
1548 | base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT"); | ||
1549 | return; | ||
1550 | } | ||
1551 | |||
1552 | count = iwl_legacy_read_targ_mem(priv, base); | ||
1553 | |||
1554 | if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { | ||
1555 | IWL_ERR(priv, "Start IWL Error Log Dump:\n"); | ||
1556 | IWL_ERR(priv, "Status: 0x%08lX, count: %d\n", | ||
1557 | priv->status, count); | ||
1558 | } | ||
1559 | |||
1560 | desc = iwl_legacy_read_targ_mem(priv, base + 1 * sizeof(u32)); | ||
1561 | priv->isr_stats.err_code = desc; | ||
1562 | pc = iwl_legacy_read_targ_mem(priv, base + 2 * sizeof(u32)); | ||
1563 | blink1 = iwl_legacy_read_targ_mem(priv, base + 3 * sizeof(u32)); | ||
1564 | blink2 = iwl_legacy_read_targ_mem(priv, base + 4 * sizeof(u32)); | ||
1565 | ilink1 = iwl_legacy_read_targ_mem(priv, base + 5 * sizeof(u32)); | ||
1566 | ilink2 = iwl_legacy_read_targ_mem(priv, base + 6 * sizeof(u32)); | ||
1567 | data1 = iwl_legacy_read_targ_mem(priv, base + 7 * sizeof(u32)); | ||
1568 | data2 = iwl_legacy_read_targ_mem(priv, base + 8 * sizeof(u32)); | ||
1569 | line = iwl_legacy_read_targ_mem(priv, base + 9 * sizeof(u32)); | ||
1570 | time = iwl_legacy_read_targ_mem(priv, base + 11 * sizeof(u32)); | ||
1571 | hcmd = iwl_legacy_read_targ_mem(priv, base + 22 * sizeof(u32)); | ||
1572 | |||
1573 | trace_iwlwifi_legacy_dev_ucode_error(priv, desc, | ||
1574 | time, data1, data2, line, | ||
1575 | blink1, blink2, ilink1, ilink2); | ||
1576 | |||
1577 | IWL_ERR(priv, "Desc Time " | ||
1578 | "data1 data2 line\n"); | ||
1579 | IWL_ERR(priv, "%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n", | ||
1580 | iwl4965_desc_lookup(desc), desc, time, data1, data2, line); | ||
1581 | IWL_ERR(priv, "pc blink1 blink2 ilink1 ilink2 hcmd\n"); | ||
1582 | IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", | ||
1583 | pc, blink1, blink2, ilink1, ilink2, hcmd); | ||
1584 | } | ||
1585 | |||
1586 | static void iwl4965_rf_kill_ct_config(struct iwl_priv *priv) | ||
1587 | { | ||
1588 | struct iwl_ct_kill_config cmd; | ||
1589 | unsigned long flags; | ||
1590 | int ret = 0; | ||
1591 | |||
1592 | spin_lock_irqsave(&priv->lock, flags); | ||
1593 | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, | ||
1594 | CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); | ||
1595 | spin_unlock_irqrestore(&priv->lock, flags); | ||
1596 | |||
1597 | cmd.critical_temperature_R = | ||
1598 | cpu_to_le32(priv->hw_params.ct_kill_threshold); | ||
1599 | |||
1600 | ret = iwl_legacy_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, | ||
1601 | sizeof(cmd), &cmd); | ||
1602 | if (ret) | ||
1603 | IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); | ||
1604 | else | ||
1605 | IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " | ||
1606 | "succeeded, " | ||
1607 | "critical temperature is %d\n", | ||
1608 | priv->hw_params.ct_kill_threshold); | ||
1609 | } | ||
1610 | |||
1611 | static const s8 default_queue_to_tx_fifo[] = { | ||
1612 | IWL_TX_FIFO_VO, | ||
1613 | IWL_TX_FIFO_VI, | ||
1614 | IWL_TX_FIFO_BE, | ||
1615 | IWL_TX_FIFO_BK, | ||
1616 | IWL49_CMD_FIFO_NUM, | ||
1617 | IWL_TX_FIFO_UNUSED, | ||
1618 | IWL_TX_FIFO_UNUSED, | ||
1619 | }; | ||
1620 | |||
1621 | static int iwl4965_alive_notify(struct iwl_priv *priv) | ||
1622 | { | ||
1623 | u32 a; | ||
1624 | unsigned long flags; | ||
1625 | int i, chan; | ||
1626 | u32 reg_val; | ||
1627 | |||
1628 | spin_lock_irqsave(&priv->lock, flags); | ||
1629 | |||
1630 | /* Clear 4965's internal Tx Scheduler data base */ | ||
1631 | priv->scd_base_addr = iwl_legacy_read_prph(priv, | ||
1632 | IWL49_SCD_SRAM_BASE_ADDR); | ||
1633 | a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET; | ||
1634 | for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4) | ||
1635 | iwl_legacy_write_targ_mem(priv, a, 0); | ||
1636 | for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4) | ||
1637 | iwl_legacy_write_targ_mem(priv, a, 0); | ||
1638 | for (; a < priv->scd_base_addr + | ||
1639 | IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4) | ||
1640 | iwl_legacy_write_targ_mem(priv, a, 0); | ||
1641 | |||
1642 | /* Tel 4965 where to find Tx byte count tables */ | ||
1643 | iwl_legacy_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR, | ||
1644 | priv->scd_bc_tbls.dma >> 10); | ||
1645 | |||
1646 | /* Enable DMA channel */ | ||
1647 | for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++) | ||
1648 | iwl_legacy_write_direct32(priv, | ||
1649 | FH_TCSR_CHNL_TX_CONFIG_REG(chan), | ||
1650 | FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | | ||
1651 | FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); | ||
1652 | |||
1653 | /* Update FH chicken bits */ | ||
1654 | reg_val = iwl_legacy_read_direct32(priv, FH_TX_CHICKEN_BITS_REG); | ||
1655 | iwl_legacy_write_direct32(priv, FH_TX_CHICKEN_BITS_REG, | ||
1656 | reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); | ||
1657 | |||
1658 | /* Disable chain mode for all queues */ | ||
1659 | iwl_legacy_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0); | ||
1660 | |||
1661 | /* Initialize each Tx queue (including the command queue) */ | ||
1662 | for (i = 0; i < priv->hw_params.max_txq_num; i++) { | ||
1663 | |||
1664 | /* TFD circular buffer read/write indexes */ | ||
1665 | iwl_legacy_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(i), 0); | ||
1666 | iwl_legacy_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8)); | ||
1667 | |||
1668 | /* Max Tx Window size for Scheduler-ACK mode */ | ||
1669 | iwl_legacy_write_targ_mem(priv, priv->scd_base_addr + | ||
1670 | IWL49_SCD_CONTEXT_QUEUE_OFFSET(i), | ||
1671 | (SCD_WIN_SIZE << | ||
1672 | IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & | ||
1673 | IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); | ||
1674 | |||
1675 | /* Frame limit */ | ||
1676 | iwl_legacy_write_targ_mem(priv, priv->scd_base_addr + | ||
1677 | IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) + | ||
1678 | sizeof(u32), | ||
1679 | (SCD_FRAME_LIMIT << | ||
1680 | IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & | ||
1681 | IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); | ||
1682 | |||
1683 | } | ||
1684 | iwl_legacy_write_prph(priv, IWL49_SCD_INTERRUPT_MASK, | ||
1685 | (1 << priv->hw_params.max_txq_num) - 1); | ||
1686 | |||
1687 | /* Activate all Tx DMA/FIFO channels */ | ||
1688 | iwl4965_txq_set_sched(priv, IWL_MASK(0, 6)); | ||
1689 | |||
1690 | iwl4965_set_wr_ptrs(priv, IWL_DEFAULT_CMD_QUEUE_NUM, 0); | ||
1691 | |||
1692 | /* make sure all queue are not stopped */ | ||
1693 | memset(&priv->queue_stopped[0], 0, sizeof(priv->queue_stopped)); | ||
1694 | for (i = 0; i < 4; i++) | ||
1695 | atomic_set(&priv->queue_stop_count[i], 0); | ||
1696 | |||
1697 | /* reset to 0 to enable all the queue first */ | ||
1698 | priv->txq_ctx_active_msk = 0; | ||
1699 | /* Map each Tx/cmd queue to its corresponding fifo */ | ||
1700 | BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7); | ||
1701 | |||
1702 | for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) { | ||
1703 | int ac = default_queue_to_tx_fifo[i]; | ||
1704 | |||
1705 | iwl_txq_ctx_activate(priv, i); | ||
1706 | |||
1707 | if (ac == IWL_TX_FIFO_UNUSED) | ||
1708 | continue; | ||
1709 | |||
1710 | iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0); | ||
1711 | } | ||
1712 | |||
1713 | spin_unlock_irqrestore(&priv->lock, flags); | ||
1714 | |||
1715 | return 0; | ||
1716 | } | ||
1717 | |||
1718 | /** | ||
1719 | * iwl4965_alive_start - called after REPLY_ALIVE notification received | ||
1720 | * from protocol/runtime uCode (initialization uCode's | ||
1721 | * Alive gets handled by iwl_init_alive_start()). | ||
1722 | */ | ||
1723 | static void iwl4965_alive_start(struct iwl_priv *priv) | ||
1724 | { | ||
1725 | int ret = 0; | ||
1726 | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | ||
1727 | |||
1728 | IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); | ||
1729 | |||
1730 | if (priv->card_alive.is_valid != UCODE_VALID_OK) { | ||
1731 | /* We had an error bringing up the hardware, so take it | ||
1732 | * all the way back down so we can try again */ | ||
1733 | IWL_DEBUG_INFO(priv, "Alive failed.\n"); | ||
1734 | goto restart; | ||
1735 | } | ||
1736 | |||
1737 | /* Initialize uCode has loaded Runtime uCode ... verify inst image. | ||
1738 | * This is a paranoid check, because we would not have gotten the | ||
1739 | * "runtime" alive if code weren't properly loaded. */ | ||
1740 | if (iwl4965_verify_ucode(priv)) { | ||
1741 | /* Runtime instruction load was bad; | ||
1742 | * take it all the way back down so we can try again */ | ||
1743 | IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n"); | ||
1744 | goto restart; | ||
1745 | } | ||
1746 | |||
1747 | ret = iwl4965_alive_notify(priv); | ||
1748 | if (ret) { | ||
1749 | IWL_WARN(priv, | ||
1750 | "Could not complete ALIVE transition [ntf]: %d\n", ret); | ||
1751 | goto restart; | ||
1752 | } | ||
1753 | |||
1754 | |||
1755 | /* After the ALIVE response, we can send host commands to the uCode */ | ||
1756 | set_bit(STATUS_ALIVE, &priv->status); | ||
1757 | |||
1758 | /* Enable watchdog to monitor the driver tx queues */ | ||
1759 | iwl_legacy_setup_watchdog(priv); | ||
1760 | |||
1761 | if (iwl_legacy_is_rfkill(priv)) | ||
1762 | return; | ||
1763 | |||
1764 | ieee80211_wake_queues(priv->hw); | ||
1765 | |||
1766 | priv->active_rate = IWL_RATES_MASK; | ||
1767 | |||
1768 | if (iwl_legacy_is_associated_ctx(ctx)) { | ||
1769 | struct iwl_legacy_rxon_cmd *active_rxon = | ||
1770 | (struct iwl_legacy_rxon_cmd *)&ctx->active; | ||
1771 | /* apply any changes in staging */ | ||
1772 | ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; | ||
1773 | active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; | ||
1774 | } else { | ||
1775 | struct iwl_rxon_context *tmp; | ||
1776 | /* Initialize our rx_config data */ | ||
1777 | for_each_context(priv, tmp) | ||
1778 | iwl_legacy_connection_init_rx_config(priv, tmp); | ||
1779 | |||
1780 | if (priv->cfg->ops->hcmd->set_rxon_chain) | ||
1781 | priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); | ||
1782 | } | ||
1783 | |||
1784 | /* Configure bluetooth coexistence if enabled */ | ||
1785 | iwl_legacy_send_bt_config(priv); | ||
1786 | |||
1787 | iwl4965_reset_run_time_calib(priv); | ||
1788 | |||
1789 | set_bit(STATUS_READY, &priv->status); | ||
1790 | |||
1791 | /* Configure the adapter for unassociated operation */ | ||
1792 | iwl_legacy_commit_rxon(priv, ctx); | ||
1793 | |||
1794 | /* At this point, the NIC is initialized and operational */ | ||
1795 | iwl4965_rf_kill_ct_config(priv); | ||
1796 | |||
1797 | IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); | ||
1798 | wake_up(&priv->wait_command_queue); | ||
1799 | |||
1800 | iwl_legacy_power_update_mode(priv, true); | ||
1801 | IWL_DEBUG_INFO(priv, "Updated power mode\n"); | ||
1802 | |||
1803 | return; | ||
1804 | |||
1805 | restart: | ||
1806 | queue_work(priv->workqueue, &priv->restart); | ||
1807 | } | ||
1808 | |||
1809 | static void iwl4965_cancel_deferred_work(struct iwl_priv *priv); | ||
1810 | |||
1811 | static void __iwl4965_down(struct iwl_priv *priv) | ||
1812 | { | ||
1813 | unsigned long flags; | ||
1814 | int exit_pending; | ||
1815 | |||
1816 | IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n"); | ||
1817 | |||
1818 | iwl_legacy_scan_cancel_timeout(priv, 200); | ||
1819 | |||
1820 | exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status); | ||
1821 | |||
1822 | /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set | ||
1823 | * to prevent rearm timer */ | ||
1824 | del_timer_sync(&priv->watchdog); | ||
1825 | |||
1826 | iwl_legacy_clear_ucode_stations(priv, NULL); | ||
1827 | iwl_legacy_dealloc_bcast_stations(priv); | ||
1828 | iwl_legacy_clear_driver_stations(priv); | ||
1829 | |||
1830 | /* Unblock any waiting calls */ | ||
1831 | wake_up_all(&priv->wait_command_queue); | ||
1832 | |||
1833 | /* Wipe out the EXIT_PENDING status bit if we are not actually | ||
1834 | * exiting the module */ | ||
1835 | if (!exit_pending) | ||
1836 | clear_bit(STATUS_EXIT_PENDING, &priv->status); | ||
1837 | |||
1838 | /* stop and reset the on-board processor */ | ||
1839 | iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); | ||
1840 | |||
1841 | /* tell the device to stop sending interrupts */ | ||
1842 | spin_lock_irqsave(&priv->lock, flags); | ||
1843 | iwl_legacy_disable_interrupts(priv); | ||
1844 | spin_unlock_irqrestore(&priv->lock, flags); | ||
1845 | iwl4965_synchronize_irq(priv); | ||
1846 | |||
1847 | if (priv->mac80211_registered) | ||
1848 | ieee80211_stop_queues(priv->hw); | ||
1849 | |||
1850 | /* If we have not previously called iwl_init() then | ||
1851 | * clear all bits but the RF Kill bit and return */ | ||
1852 | if (!iwl_legacy_is_init(priv)) { | ||
1853 | priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) << | ||
1854 | STATUS_RF_KILL_HW | | ||
1855 | test_bit(STATUS_GEO_CONFIGURED, &priv->status) << | ||
1856 | STATUS_GEO_CONFIGURED | | ||
1857 | test_bit(STATUS_EXIT_PENDING, &priv->status) << | ||
1858 | STATUS_EXIT_PENDING; | ||
1859 | goto exit; | ||
1860 | } | ||
1861 | |||
1862 | /* ...otherwise clear out all the status bits but the RF Kill | ||
1863 | * bit and continue taking the NIC down. */ | ||
1864 | priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << | ||
1865 | STATUS_RF_KILL_HW | | ||
1866 | test_bit(STATUS_GEO_CONFIGURED, &priv->status) << | ||
1867 | STATUS_GEO_CONFIGURED | | ||
1868 | test_bit(STATUS_FW_ERROR, &priv->status) << | ||
1869 | STATUS_FW_ERROR | | ||
1870 | test_bit(STATUS_EXIT_PENDING, &priv->status) << | ||
1871 | STATUS_EXIT_PENDING; | ||
1872 | |||
1873 | iwl4965_txq_ctx_stop(priv); | ||
1874 | iwl4965_rxq_stop(priv); | ||
1875 | |||
1876 | /* Power-down device's busmaster DMA clocks */ | ||
1877 | iwl_legacy_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); | ||
1878 | udelay(5); | ||
1879 | |||
1880 | /* Make sure (redundant) we've released our request to stay awake */ | ||
1881 | iwl_legacy_clear_bit(priv, CSR_GP_CNTRL, | ||
1882 | CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); | ||
1883 | |||
1884 | /* Stop the device, and put it in low power state */ | ||
1885 | iwl_legacy_apm_stop(priv); | ||
1886 | |||
1887 | exit: | ||
1888 | memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp)); | ||
1889 | |||
1890 | dev_kfree_skb(priv->beacon_skb); | ||
1891 | priv->beacon_skb = NULL; | ||
1892 | |||
1893 | /* clear out any free frames */ | ||
1894 | iwl4965_clear_free_frames(priv); | ||
1895 | } | ||
1896 | |||
1897 | static void iwl4965_down(struct iwl_priv *priv) | ||
1898 | { | ||
1899 | mutex_lock(&priv->mutex); | ||
1900 | __iwl4965_down(priv); | ||
1901 | mutex_unlock(&priv->mutex); | ||
1902 | |||
1903 | iwl4965_cancel_deferred_work(priv); | ||
1904 | } | ||
1905 | |||
1906 | #define HW_READY_TIMEOUT (50) | ||
1907 | |||
1908 | static int iwl4965_set_hw_ready(struct iwl_priv *priv) | ||
1909 | { | ||
1910 | int ret = 0; | ||
1911 | |||
1912 | iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, | ||
1913 | CSR_HW_IF_CONFIG_REG_BIT_NIC_READY); | ||
1914 | |||
1915 | /* See if we got it */ | ||
1916 | ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG, | ||
1917 | CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, | ||
1918 | CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, | ||
1919 | HW_READY_TIMEOUT); | ||
1920 | if (ret != -ETIMEDOUT) | ||
1921 | priv->hw_ready = true; | ||
1922 | else | ||
1923 | priv->hw_ready = false; | ||
1924 | |||
1925 | IWL_DEBUG_INFO(priv, "hardware %s\n", | ||
1926 | (priv->hw_ready == 1) ? "ready" : "not ready"); | ||
1927 | return ret; | ||
1928 | } | ||
1929 | |||
1930 | static int iwl4965_prepare_card_hw(struct iwl_priv *priv) | ||
1931 | { | ||
1932 | int ret = 0; | ||
1933 | |||
1934 | IWL_DEBUG_INFO(priv, "iwl4965_prepare_card_hw enter\n"); | ||
1935 | |||
1936 | ret = iwl4965_set_hw_ready(priv); | ||
1937 | if (priv->hw_ready) | ||
1938 | return ret; | ||
1939 | |||
1940 | /* If HW is not ready, prepare the conditions to check again */ | ||
1941 | iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, | ||
1942 | CSR_HW_IF_CONFIG_REG_PREPARE); | ||
1943 | |||
1944 | ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG, | ||
1945 | ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, | ||
1946 | CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000); | ||
1947 | |||
1948 | /* HW should be ready by now, check again. */ | ||
1949 | if (ret != -ETIMEDOUT) | ||
1950 | iwl4965_set_hw_ready(priv); | ||
1951 | |||
1952 | return ret; | ||
1953 | } | ||
1954 | |||
1955 | #define MAX_HW_RESTARTS 5 | ||
1956 | |||
1957 | static int __iwl4965_up(struct iwl_priv *priv) | ||
1958 | { | ||
1959 | struct iwl_rxon_context *ctx; | ||
1960 | int i; | ||
1961 | int ret; | ||
1962 | |||
1963 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { | ||
1964 | IWL_WARN(priv, "Exit pending; will not bring the NIC up\n"); | ||
1965 | return -EIO; | ||
1966 | } | ||
1967 | |||
1968 | if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { | ||
1969 | IWL_ERR(priv, "ucode not available for device bringup\n"); | ||
1970 | return -EIO; | ||
1971 | } | ||
1972 | |||
1973 | for_each_context(priv, ctx) { | ||
1974 | ret = iwl4965_alloc_bcast_station(priv, ctx); | ||
1975 | if (ret) { | ||
1976 | iwl_legacy_dealloc_bcast_stations(priv); | ||
1977 | return ret; | ||
1978 | } | ||
1979 | } | ||
1980 | |||
1981 | iwl4965_prepare_card_hw(priv); | ||
1982 | |||
1983 | if (!priv->hw_ready) { | ||
1984 | IWL_WARN(priv, "Exit HW not ready\n"); | ||
1985 | return -EIO; | ||
1986 | } | ||
1987 | |||
1988 | /* If platform's RF_KILL switch is NOT set to KILL */ | ||
1989 | if (iwl_read32(priv, | ||
1990 | CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) | ||
1991 | clear_bit(STATUS_RF_KILL_HW, &priv->status); | ||
1992 | else | ||
1993 | set_bit(STATUS_RF_KILL_HW, &priv->status); | ||
1994 | |||
1995 | if (iwl_legacy_is_rfkill(priv)) { | ||
1996 | wiphy_rfkill_set_hw_state(priv->hw->wiphy, true); | ||
1997 | |||
1998 | iwl_legacy_enable_interrupts(priv); | ||
1999 | IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n"); | ||
2000 | return 0; | ||
2001 | } | ||
2002 | |||
2003 | iwl_write32(priv, CSR_INT, 0xFFFFFFFF); | ||
2004 | |||
2005 | /* must be initialised before iwl_hw_nic_init */ | ||
2006 | priv->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM; | ||
2007 | |||
2008 | ret = iwl4965_hw_nic_init(priv); | ||
2009 | if (ret) { | ||
2010 | IWL_ERR(priv, "Unable to init nic\n"); | ||
2011 | return ret; | ||
2012 | } | ||
2013 | |||
2014 | /* make sure rfkill handshake bits are cleared */ | ||
2015 | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); | ||
2016 | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, | ||
2017 | CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); | ||
2018 | |||
2019 | /* clear (again), then enable host interrupts */ | ||
2020 | iwl_write32(priv, CSR_INT, 0xFFFFFFFF); | ||
2021 | iwl_legacy_enable_interrupts(priv); | ||
2022 | |||
2023 | /* really make sure rfkill handshake bits are cleared */ | ||
2024 | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); | ||
2025 | iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); | ||
2026 | |||
2027 | /* Copy original ucode data image from disk into backup cache. | ||
2028 | * This will be used to initialize the on-board processor's | ||
2029 | * data SRAM for a clean start when the runtime program first loads. */ | ||
2030 | memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, | ||
2031 | priv->ucode_data.len); | ||
2032 | |||
2033 | for (i = 0; i < MAX_HW_RESTARTS; i++) { | ||
2034 | |||
2035 | /* load bootstrap state machine, | ||
2036 | * load bootstrap program into processor's memory, | ||
2037 | * prepare to load the "initialize" uCode */ | ||
2038 | ret = priv->cfg->ops->lib->load_ucode(priv); | ||
2039 | |||
2040 | if (ret) { | ||
2041 | IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n", | ||
2042 | ret); | ||
2043 | continue; | ||
2044 | } | ||
2045 | |||
2046 | /* start card; "initialize" will load runtime ucode */ | ||
2047 | iwl4965_nic_start(priv); | ||
2048 | |||
2049 | IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n"); | ||
2050 | |||
2051 | return 0; | ||
2052 | } | ||
2053 | |||
2054 | set_bit(STATUS_EXIT_PENDING, &priv->status); | ||
2055 | __iwl4965_down(priv); | ||
2056 | clear_bit(STATUS_EXIT_PENDING, &priv->status); | ||
2057 | |||
2058 | /* tried to restart and config the device for as long as our | ||
2059 | * patience could withstand */ | ||
2060 | IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i); | ||
2061 | return -EIO; | ||
2062 | } | ||
2063 | |||
2064 | |||
2065 | /***************************************************************************** | ||
2066 | * | ||
2067 | * Workqueue callbacks | ||
2068 | * | ||
2069 | *****************************************************************************/ | ||
2070 | |||
2071 | static void iwl4965_bg_init_alive_start(struct work_struct *data) | ||
2072 | { | ||
2073 | struct iwl_priv *priv = | ||
2074 | container_of(data, struct iwl_priv, init_alive_start.work); | ||
2075 | |||
2076 | mutex_lock(&priv->mutex); | ||
2077 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | ||
2078 | goto out; | ||
2079 | |||
2080 | priv->cfg->ops->lib->init_alive_start(priv); | ||
2081 | out: | ||
2082 | mutex_unlock(&priv->mutex); | ||
2083 | } | ||
2084 | |||
2085 | static void iwl4965_bg_alive_start(struct work_struct *data) | ||
2086 | { | ||
2087 | struct iwl_priv *priv = | ||
2088 | container_of(data, struct iwl_priv, alive_start.work); | ||
2089 | |||
2090 | mutex_lock(&priv->mutex); | ||
2091 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | ||
2092 | goto out; | ||
2093 | |||
2094 | iwl4965_alive_start(priv); | ||
2095 | out: | ||
2096 | mutex_unlock(&priv->mutex); | ||
2097 | } | ||
2098 | |||
2099 | static void iwl4965_bg_run_time_calib_work(struct work_struct *work) | ||
2100 | { | ||
2101 | struct iwl_priv *priv = container_of(work, struct iwl_priv, | ||
2102 | run_time_calib_work); | ||
2103 | |||
2104 | mutex_lock(&priv->mutex); | ||
2105 | |||
2106 | if (test_bit(STATUS_EXIT_PENDING, &priv->status) || | ||
2107 | test_bit(STATUS_SCANNING, &priv->status)) { | ||
2108 | mutex_unlock(&priv->mutex); | ||
2109 | return; | ||
2110 | } | ||
2111 | |||
2112 | if (priv->start_calib) { | ||
2113 | iwl4965_chain_noise_calibration(priv, | ||
2114 | (void *)&priv->_4965.statistics); | ||
2115 | iwl4965_sensitivity_calibration(priv, | ||
2116 | (void *)&priv->_4965.statistics); | ||
2117 | } | ||
2118 | |||
2119 | mutex_unlock(&priv->mutex); | ||
2120 | } | ||
2121 | |||
2122 | static void iwl4965_bg_restart(struct work_struct *data) | ||
2123 | { | ||
2124 | struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); | ||
2125 | |||
2126 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | ||
2127 | return; | ||
2128 | |||
2129 | if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) { | ||
2130 | struct iwl_rxon_context *ctx; | ||
2131 | |||
2132 | mutex_lock(&priv->mutex); | ||
2133 | for_each_context(priv, ctx) | ||
2134 | ctx->vif = NULL; | ||
2135 | priv->is_open = 0; | ||
2136 | |||
2137 | __iwl4965_down(priv); | ||
2138 | |||
2139 | mutex_unlock(&priv->mutex); | ||
2140 | iwl4965_cancel_deferred_work(priv); | ||
2141 | ieee80211_restart_hw(priv->hw); | ||
2142 | } else { | ||
2143 | iwl4965_down(priv); | ||
2144 | |||
2145 | mutex_lock(&priv->mutex); | ||
2146 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { | ||
2147 | mutex_unlock(&priv->mutex); | ||
2148 | return; | ||
2149 | } | ||
2150 | |||
2151 | __iwl4965_up(priv); | ||
2152 | mutex_unlock(&priv->mutex); | ||
2153 | } | ||
2154 | } | ||
2155 | |||
2156 | static void iwl4965_bg_rx_replenish(struct work_struct *data) | ||
2157 | { | ||
2158 | struct iwl_priv *priv = | ||
2159 | container_of(data, struct iwl_priv, rx_replenish); | ||
2160 | |||
2161 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | ||
2162 | return; | ||
2163 | |||
2164 | mutex_lock(&priv->mutex); | ||
2165 | iwl4965_rx_replenish(priv); | ||
2166 | mutex_unlock(&priv->mutex); | ||
2167 | } | ||
2168 | |||
2169 | /***************************************************************************** | ||
2170 | * | ||
2171 | * mac80211 entry point functions | ||
2172 | * | ||
2173 | *****************************************************************************/ | ||
2174 | |||
2175 | #define UCODE_READY_TIMEOUT (4 * HZ) | ||
2176 | |||
2177 | /* | ||
2178 | * Not a mac80211 entry point function, but it fits in with all the | ||
2179 | * other mac80211 functions grouped here. | ||
2180 | */ | ||
2181 | static int iwl4965_mac_setup_register(struct iwl_priv *priv, | ||
2182 | u32 max_probe_length) | ||
2183 | { | ||
2184 | int ret; | ||
2185 | struct ieee80211_hw *hw = priv->hw; | ||
2186 | struct iwl_rxon_context *ctx; | ||
2187 | |||
2188 | hw->rate_control_algorithm = "iwl-4965-rs"; | ||
2189 | |||
2190 | /* Tell mac80211 our characteristics */ | ||
2191 | hw->flags = IEEE80211_HW_SIGNAL_DBM | | ||
2192 | IEEE80211_HW_AMPDU_AGGREGATION | | ||
2193 | IEEE80211_HW_NEED_DTIM_PERIOD | | ||
2194 | IEEE80211_HW_SPECTRUM_MGMT | | ||
2195 | IEEE80211_HW_REPORTS_TX_ACK_STATUS; | ||
2196 | |||
2197 | if (priv->cfg->sku & IWL_SKU_N) | ||
2198 | hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | | ||
2199 | IEEE80211_HW_SUPPORTS_STATIC_SMPS; | ||
2200 | |||
2201 | hw->sta_data_size = sizeof(struct iwl_station_priv); | ||
2202 | hw->vif_data_size = sizeof(struct iwl_vif_priv); | ||
2203 | |||
2204 | for_each_context(priv, ctx) { | ||
2205 | hw->wiphy->interface_modes |= ctx->interface_modes; | ||
2206 | hw->wiphy->interface_modes |= ctx->exclusive_interface_modes; | ||
2207 | } | ||
2208 | |||
2209 | hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY | | ||
2210 | WIPHY_FLAG_DISABLE_BEACON_HINTS; | ||
2211 | |||
2212 | /* | ||
2213 | * For now, disable PS by default because it affects | ||
2214 | * RX performance significantly. | ||
2215 | */ | ||
2216 | hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; | ||
2217 | |||
2218 | hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; | ||
2219 | /* we create the 802.11 header and a zero-length SSID element */ | ||
2220 | hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2; | ||
2221 | |||
2222 | /* Default value; 4 EDCA QOS priorities */ | ||
2223 | hw->queues = 4; | ||
2224 | |||
2225 | hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; | ||
2226 | |||
2227 | if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) | ||
2228 | priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = | ||
2229 | &priv->bands[IEEE80211_BAND_2GHZ]; | ||
2230 | if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) | ||
2231 | priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = | ||
2232 | &priv->bands[IEEE80211_BAND_5GHZ]; | ||
2233 | |||
2234 | iwl_legacy_leds_init(priv); | ||
2235 | |||
2236 | ret = ieee80211_register_hw(priv->hw); | ||
2237 | if (ret) { | ||
2238 | IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); | ||
2239 | return ret; | ||
2240 | } | ||
2241 | priv->mac80211_registered = 1; | ||
2242 | |||
2243 | return 0; | ||
2244 | } | ||
2245 | |||
2246 | |||
2247 | int iwl4965_mac_start(struct ieee80211_hw *hw) | ||
2248 | { | ||
2249 | struct iwl_priv *priv = hw->priv; | ||
2250 | int ret; | ||
2251 | |||
2252 | IWL_DEBUG_MAC80211(priv, "enter\n"); | ||
2253 | |||
2254 | /* we should be verifying the device is ready to be opened */ | ||
2255 | mutex_lock(&priv->mutex); | ||
2256 | ret = __iwl4965_up(priv); | ||
2257 | mutex_unlock(&priv->mutex); | ||
2258 | |||
2259 | if (ret) | ||
2260 | return ret; | ||
2261 | |||
2262 | if (iwl_legacy_is_rfkill(priv)) | ||
2263 | goto out; | ||
2264 | |||
2265 | IWL_DEBUG_INFO(priv, "Start UP work done.\n"); | ||
2266 | |||
2267 | /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from | ||
2268 | * mac80211 will not be run successfully. */ | ||
2269 | ret = wait_event_timeout(priv->wait_command_queue, | ||
2270 | test_bit(STATUS_READY, &priv->status), | ||
2271 | UCODE_READY_TIMEOUT); | ||
2272 | if (!ret) { | ||
2273 | if (!test_bit(STATUS_READY, &priv->status)) { | ||
2274 | IWL_ERR(priv, "START_ALIVE timeout after %dms.\n", | ||
2275 | jiffies_to_msecs(UCODE_READY_TIMEOUT)); | ||
2276 | return -ETIMEDOUT; | ||
2277 | } | ||
2278 | } | ||
2279 | |||
2280 | iwl4965_led_enable(priv); | ||
2281 | |||
2282 | out: | ||
2283 | priv->is_open = 1; | ||
2284 | IWL_DEBUG_MAC80211(priv, "leave\n"); | ||
2285 | return 0; | ||
2286 | } | ||
2287 | |||
2288 | void iwl4965_mac_stop(struct ieee80211_hw *hw) | ||
2289 | { | ||
2290 | struct iwl_priv *priv = hw->priv; | ||
2291 | |||
2292 | IWL_DEBUG_MAC80211(priv, "enter\n"); | ||
2293 | |||
2294 | if (!priv->is_open) | ||
2295 | return; | ||
2296 | |||
2297 | priv->is_open = 0; | ||
2298 | |||
2299 | iwl4965_down(priv); | ||
2300 | |||
2301 | flush_workqueue(priv->workqueue); | ||
2302 | |||
2303 | /* User space software may expect getting rfkill changes | ||
2304 | * even if interface is down */ | ||
2305 | iwl_write32(priv, CSR_INT, 0xFFFFFFFF); | ||
2306 | iwl_legacy_enable_rfkill_int(priv); | ||
2307 | |||
2308 | IWL_DEBUG_MAC80211(priv, "leave\n"); | ||
2309 | } | ||
2310 | |||
2311 | void iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) | ||
2312 | { | ||
2313 | struct iwl_priv *priv = hw->priv; | ||
2314 | |||
2315 | IWL_DEBUG_MACDUMP(priv, "enter\n"); | ||
2316 | |||
2317 | IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, | ||
2318 | ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); | ||
2319 | |||
2320 | if (iwl4965_tx_skb(priv, skb)) | ||
2321 | dev_kfree_skb_any(skb); | ||
2322 | |||
2323 | IWL_DEBUG_MACDUMP(priv, "leave\n"); | ||
2324 | } | ||
2325 | |||
2326 | void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, | ||
2327 | struct ieee80211_vif *vif, | ||
2328 | struct ieee80211_key_conf *keyconf, | ||
2329 | struct ieee80211_sta *sta, | ||
2330 | u32 iv32, u16 *phase1key) | ||
2331 | { | ||
2332 | struct iwl_priv *priv = hw->priv; | ||
2333 | struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; | ||
2334 | |||
2335 | IWL_DEBUG_MAC80211(priv, "enter\n"); | ||
2336 | |||
2337 | iwl4965_update_tkip_key(priv, vif_priv->ctx, keyconf, sta, | ||
2338 | iv32, phase1key); | ||
2339 | |||
2340 | IWL_DEBUG_MAC80211(priv, "leave\n"); | ||
2341 | } | ||
2342 | |||
2343 | int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, | ||
2344 | struct ieee80211_vif *vif, struct ieee80211_sta *sta, | ||
2345 | struct ieee80211_key_conf *key) | ||
2346 | { | ||
2347 | struct iwl_priv *priv = hw->priv; | ||
2348 | struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; | ||
2349 | struct iwl_rxon_context *ctx = vif_priv->ctx; | ||
2350 | int ret; | ||
2351 | u8 sta_id; | ||
2352 | bool is_default_wep_key = false; | ||
2353 | |||
2354 | IWL_DEBUG_MAC80211(priv, "enter\n"); | ||
2355 | |||
2356 | if (priv->cfg->mod_params->sw_crypto) { | ||
2357 | IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n"); | ||
2358 | return -EOPNOTSUPP; | ||
2359 | } | ||
2360 | |||
2361 | sta_id = iwl_legacy_sta_id_or_broadcast(priv, vif_priv->ctx, sta); | ||
2362 | if (sta_id == IWL_INVALID_STATION) | ||
2363 | return -EINVAL; | ||
2364 | |||
2365 | mutex_lock(&priv->mutex); | ||
2366 | iwl_legacy_scan_cancel_timeout(priv, 100); | ||
2367 | |||
2368 | /* | ||
2369 | * If we are getting WEP group key and we didn't receive any key mapping | ||
2370 | * so far, we are in legacy wep mode (group key only), otherwise we are | ||
2371 | * in 1X mode. | ||
2372 | * In legacy wep mode, we use another host command to the uCode. | ||
2373 | */ | ||
2374 | if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || | ||
2375 | key->cipher == WLAN_CIPHER_SUITE_WEP104) && | ||
2376 | !sta) { | ||
2377 | if (cmd == SET_KEY) | ||
2378 | is_default_wep_key = !ctx->key_mapping_keys; | ||
2379 | else | ||
2380 | is_default_wep_key = | ||
2381 | (key->hw_key_idx == HW_KEY_DEFAULT); | ||
2382 | } | ||
2383 | |||
2384 | switch (cmd) { | ||
2385 | case SET_KEY: | ||
2386 | if (is_default_wep_key) | ||
2387 | ret = iwl4965_set_default_wep_key(priv, | ||
2388 | vif_priv->ctx, key); | ||
2389 | else | ||
2390 | ret = iwl4965_set_dynamic_key(priv, vif_priv->ctx, | ||
2391 | key, sta_id); | ||
2392 | |||
2393 | IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n"); | ||
2394 | break; | ||
2395 | case DISABLE_KEY: | ||
2396 | if (is_default_wep_key) | ||
2397 | ret = iwl4965_remove_default_wep_key(priv, ctx, key); | ||
2398 | else | ||
2399 | ret = iwl4965_remove_dynamic_key(priv, ctx, | ||
2400 | key, sta_id); | ||
2401 | |||
2402 | IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n"); | ||
2403 | break; | ||
2404 | default: | ||
2405 | ret = -EINVAL; | ||
2406 | } | ||
2407 | |||
2408 | mutex_unlock(&priv->mutex); | ||
2409 | IWL_DEBUG_MAC80211(priv, "leave\n"); | ||
2410 | |||
2411 | return ret; | ||
2412 | } | ||
2413 | |||
2414 | int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, | ||
2415 | struct ieee80211_vif *vif, | ||
2416 | enum ieee80211_ampdu_mlme_action action, | ||
2417 | struct ieee80211_sta *sta, u16 tid, u16 *ssn, | ||
2418 | u8 buf_size) | ||
2419 | { | ||
2420 | struct iwl_priv *priv = hw->priv; | ||
2421 | int ret = -EINVAL; | ||
2422 | |||
2423 | IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n", | ||
2424 | sta->addr, tid); | ||
2425 | |||
2426 | if (!(priv->cfg->sku & IWL_SKU_N)) | ||
2427 | return -EACCES; | ||
2428 | |||
2429 | mutex_lock(&priv->mutex); | ||
2430 | |||
2431 | switch (action) { | ||
2432 | case IEEE80211_AMPDU_RX_START: | ||
2433 | IWL_DEBUG_HT(priv, "start Rx\n"); | ||
2434 | ret = iwl4965_sta_rx_agg_start(priv, sta, tid, *ssn); | ||
2435 | break; | ||
2436 | case IEEE80211_AMPDU_RX_STOP: | ||
2437 | IWL_DEBUG_HT(priv, "stop Rx\n"); | ||
2438 | ret = iwl4965_sta_rx_agg_stop(priv, sta, tid); | ||
2439 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | ||
2440 | ret = 0; | ||
2441 | break; | ||
2442 | case IEEE80211_AMPDU_TX_START: | ||
2443 | IWL_DEBUG_HT(priv, "start Tx\n"); | ||
2444 | ret = iwl4965_tx_agg_start(priv, vif, sta, tid, ssn); | ||
2445 | break; | ||
2446 | case IEEE80211_AMPDU_TX_STOP: | ||
2447 | IWL_DEBUG_HT(priv, "stop Tx\n"); | ||
2448 | ret = iwl4965_tx_agg_stop(priv, vif, sta, tid); | ||
2449 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | ||
2450 | ret = 0; | ||
2451 | break; | ||
2452 | case IEEE80211_AMPDU_TX_OPERATIONAL: | ||
2453 | ret = 0; | ||
2454 | break; | ||
2455 | } | ||
2456 | mutex_unlock(&priv->mutex); | ||
2457 | |||
2458 | return ret; | ||
2459 | } | ||
2460 | |||
2461 | int iwl4965_mac_sta_add(struct ieee80211_hw *hw, | ||
2462 | struct ieee80211_vif *vif, | ||
2463 | struct ieee80211_sta *sta) | ||
2464 | { | ||
2465 | struct iwl_priv *priv = hw->priv; | ||
2466 | struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; | ||
2467 | struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; | ||
2468 | bool is_ap = vif->type == NL80211_IFTYPE_STATION; | ||
2469 | int ret; | ||
2470 | u8 sta_id; | ||
2471 | |||
2472 | IWL_DEBUG_INFO(priv, "received request to add station %pM\n", | ||
2473 | sta->addr); | ||
2474 | mutex_lock(&priv->mutex); | ||
2475 | IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n", | ||
2476 | sta->addr); | ||
2477 | sta_priv->common.sta_id = IWL_INVALID_STATION; | ||
2478 | |||
2479 | atomic_set(&sta_priv->pending_frames, 0); | ||
2480 | |||
2481 | ret = iwl_legacy_add_station_common(priv, vif_priv->ctx, sta->addr, | ||
2482 | is_ap, sta, &sta_id); | ||
2483 | if (ret) { | ||
2484 | IWL_ERR(priv, "Unable to add station %pM (%d)\n", | ||
2485 | sta->addr, ret); | ||
2486 | /* Should we return success if return code is EEXIST ? */ | ||
2487 | mutex_unlock(&priv->mutex); | ||
2488 | return ret; | ||
2489 | } | ||
2490 | |||
2491 | sta_priv->common.sta_id = sta_id; | ||
2492 | |||
2493 | /* Initialize rate scaling */ | ||
2494 | IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n", | ||
2495 | sta->addr); | ||
2496 | iwl4965_rs_rate_init(priv, sta, sta_id); | ||
2497 | mutex_unlock(&priv->mutex); | ||
2498 | |||
2499 | return 0; | ||
2500 | } | ||
2501 | |||
2502 | void iwl4965_mac_channel_switch(struct ieee80211_hw *hw, | ||
2503 | struct ieee80211_channel_switch *ch_switch) | ||
2504 | { | ||
2505 | struct iwl_priv *priv = hw->priv; | ||
2506 | const struct iwl_channel_info *ch_info; | ||
2507 | struct ieee80211_conf *conf = &hw->conf; | ||
2508 | struct ieee80211_channel *channel = ch_switch->channel; | ||
2509 | struct iwl_ht_config *ht_conf = &priv->current_ht_config; | ||
2510 | |||
2511 | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | ||
2512 | u16 ch; | ||
2513 | |||
2514 | IWL_DEBUG_MAC80211(priv, "enter\n"); | ||
2515 | |||
2516 | mutex_lock(&priv->mutex); | ||
2517 | |||
2518 | if (iwl_legacy_is_rfkill(priv)) | ||
2519 | goto out; | ||
2520 | |||
2521 | if (test_bit(STATUS_EXIT_PENDING, &priv->status) || | ||
2522 | test_bit(STATUS_SCANNING, &priv->status) || | ||
2523 | test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) | ||
2524 | goto out; | ||
2525 | |||
2526 | if (!iwl_legacy_is_associated_ctx(ctx)) | ||
2527 | goto out; | ||
2528 | |||
2529 | if (!priv->cfg->ops->lib->set_channel_switch) | ||
2530 | goto out; | ||
2531 | |||
2532 | ch = channel->hw_value; | ||
2533 | if (le16_to_cpu(ctx->active.channel) == ch) | ||
2534 | goto out; | ||
2535 | |||
2536 | ch_info = iwl_legacy_get_channel_info(priv, channel->band, ch); | ||
2537 | if (!iwl_legacy_is_channel_valid(ch_info)) { | ||
2538 | IWL_DEBUG_MAC80211(priv, "invalid channel\n"); | ||
2539 | goto out; | ||
2540 | } | ||
2541 | |||
2542 | spin_lock_irq(&priv->lock); | ||
2543 | |||
2544 | priv->current_ht_config.smps = conf->smps_mode; | ||
2545 | |||
2546 | /* Configure HT40 channels */ | ||
2547 | ctx->ht.enabled = conf_is_ht(conf); | ||
2548 | if (ctx->ht.enabled) { | ||
2549 | if (conf_is_ht40_minus(conf)) { | ||
2550 | ctx->ht.extension_chan_offset = | ||
2551 | IEEE80211_HT_PARAM_CHA_SEC_BELOW; | ||
2552 | ctx->ht.is_40mhz = true; | ||
2553 | } else if (conf_is_ht40_plus(conf)) { | ||
2554 | ctx->ht.extension_chan_offset = | ||
2555 | IEEE80211_HT_PARAM_CHA_SEC_ABOVE; | ||
2556 | ctx->ht.is_40mhz = true; | ||
2557 | } else { | ||
2558 | ctx->ht.extension_chan_offset = | ||
2559 | IEEE80211_HT_PARAM_CHA_SEC_NONE; | ||
2560 | ctx->ht.is_40mhz = false; | ||
2561 | } | ||
2562 | } else | ||
2563 | ctx->ht.is_40mhz = false; | ||
2564 | |||
2565 | if ((le16_to_cpu(ctx->staging.channel) != ch)) | ||
2566 | ctx->staging.flags = 0; | ||
2567 | |||
2568 | iwl_legacy_set_rxon_channel(priv, channel, ctx); | ||
2569 | iwl_legacy_set_rxon_ht(priv, ht_conf); | ||
2570 | iwl_legacy_set_flags_for_band(priv, ctx, channel->band, ctx->vif); | ||
2571 | |||
2572 | spin_unlock_irq(&priv->lock); | ||
2573 | |||
2574 | iwl_legacy_set_rate(priv); | ||
2575 | /* | ||
2576 | * at this point, staging_rxon has the | ||
2577 | * configuration for channel switch | ||
2578 | */ | ||
2579 | set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); | ||
2580 | priv->switch_channel = cpu_to_le16(ch); | ||
2581 | if (priv->cfg->ops->lib->set_channel_switch(priv, ch_switch)) { | ||
2582 | clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); | ||
2583 | priv->switch_channel = 0; | ||
2584 | ieee80211_chswitch_done(ctx->vif, false); | ||
2585 | } | ||
2586 | |||
2587 | out: | ||
2588 | mutex_unlock(&priv->mutex); | ||
2589 | IWL_DEBUG_MAC80211(priv, "leave\n"); | ||
2590 | } | ||
2591 | |||
2592 | void iwl4965_configure_filter(struct ieee80211_hw *hw, | ||
2593 | unsigned int changed_flags, | ||
2594 | unsigned int *total_flags, | ||
2595 | u64 multicast) | ||
2596 | { | ||
2597 | struct iwl_priv *priv = hw->priv; | ||
2598 | __le32 filter_or = 0, filter_nand = 0; | ||
2599 | struct iwl_rxon_context *ctx; | ||
2600 | |||
2601 | #define CHK(test, flag) do { \ | ||
2602 | if (*total_flags & (test)) \ | ||
2603 | filter_or |= (flag); \ | ||
2604 | else \ | ||
2605 | filter_nand |= (flag); \ | ||
2606 | } while (0) | ||
2607 | |||
2608 | IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", | ||
2609 | changed_flags, *total_flags); | ||
2610 | |||
2611 | CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); | ||
2612 | /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */ | ||
2613 | CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK); | ||
2614 | CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); | ||
2615 | |||
2616 | #undef CHK | ||
2617 | |||
2618 | mutex_lock(&priv->mutex); | ||
2619 | |||
2620 | for_each_context(priv, ctx) { | ||
2621 | ctx->staging.filter_flags &= ~filter_nand; | ||
2622 | ctx->staging.filter_flags |= filter_or; | ||
2623 | |||
2624 | /* | ||
2625 | * Not committing directly because hardware can perform a scan, | ||
2626 | * but we'll eventually commit the filter flags change anyway. | ||
2627 | */ | ||
2628 | } | ||
2629 | |||
2630 | mutex_unlock(&priv->mutex); | ||
2631 | |||
2632 | /* | ||
2633 | * Receiving all multicast frames is always enabled by the | ||
2634 | * default flags setup in iwl_legacy_connection_init_rx_config() | ||
2635 | * since we currently do not support programming multicast | ||
2636 | * filters into the device. | ||
2637 | */ | ||
2638 | *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | | ||
2639 | FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; | ||
2640 | } | ||
2641 | |||
2642 | /***************************************************************************** | ||
2643 | * | ||
2644 | * driver setup and teardown | ||
2645 | * | ||
2646 | *****************************************************************************/ | ||
2647 | |||
2648 | static void iwl4965_bg_txpower_work(struct work_struct *work) | ||
2649 | { | ||
2650 | struct iwl_priv *priv = container_of(work, struct iwl_priv, | ||
2651 | txpower_work); | ||
2652 | |||
2653 | mutex_lock(&priv->mutex); | ||
2654 | |||
2655 | /* If a scan happened to start before we got here | ||
2656 | * then just return; the statistics notification will | ||
2657 | * kick off another scheduled work to compensate for | ||
2658 | * any temperature delta we missed here. */ | ||
2659 | if (test_bit(STATUS_EXIT_PENDING, &priv->status) || | ||
2660 | test_bit(STATUS_SCANNING, &priv->status)) | ||
2661 | goto out; | ||
2662 | |||
2663 | /* Regardless of if we are associated, we must reconfigure the | ||
2664 | * TX power since frames can be sent on non-radar channels while | ||
2665 | * not associated */ | ||
2666 | priv->cfg->ops->lib->send_tx_power(priv); | ||
2667 | |||
2668 | /* Update last_temperature to keep is_calib_needed from running | ||
2669 | * when it isn't needed... */ | ||
2670 | priv->last_temperature = priv->temperature; | ||
2671 | out: | ||
2672 | mutex_unlock(&priv->mutex); | ||
2673 | } | ||
2674 | |||
2675 | static void iwl4965_setup_deferred_work(struct iwl_priv *priv) | ||
2676 | { | ||
2677 | priv->workqueue = create_singlethread_workqueue(DRV_NAME); | ||
2678 | |||
2679 | init_waitqueue_head(&priv->wait_command_queue); | ||
2680 | |||
2681 | INIT_WORK(&priv->restart, iwl4965_bg_restart); | ||
2682 | INIT_WORK(&priv->rx_replenish, iwl4965_bg_rx_replenish); | ||
2683 | INIT_WORK(&priv->run_time_calib_work, iwl4965_bg_run_time_calib_work); | ||
2684 | INIT_DELAYED_WORK(&priv->init_alive_start, iwl4965_bg_init_alive_start); | ||
2685 | INIT_DELAYED_WORK(&priv->alive_start, iwl4965_bg_alive_start); | ||
2686 | |||
2687 | iwl_legacy_setup_scan_deferred_work(priv); | ||
2688 | |||
2689 | INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work); | ||
2690 | |||
2691 | init_timer(&priv->statistics_periodic); | ||
2692 | priv->statistics_periodic.data = (unsigned long)priv; | ||
2693 | priv->statistics_periodic.function = iwl4965_bg_statistics_periodic; | ||
2694 | |||
2695 | init_timer(&priv->watchdog); | ||
2696 | priv->watchdog.data = (unsigned long)priv; | ||
2697 | priv->watchdog.function = iwl_legacy_bg_watchdog; | ||
2698 | |||
2699 | tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) | ||
2700 | iwl4965_irq_tasklet, (unsigned long)priv); | ||
2701 | } | ||
2702 | |||
2703 | static void iwl4965_cancel_deferred_work(struct iwl_priv *priv) | ||
2704 | { | ||
2705 | cancel_work_sync(&priv->txpower_work); | ||
2706 | cancel_delayed_work_sync(&priv->init_alive_start); | ||
2707 | cancel_delayed_work(&priv->alive_start); | ||
2708 | cancel_work_sync(&priv->run_time_calib_work); | ||
2709 | |||
2710 | iwl_legacy_cancel_scan_deferred_work(priv); | ||
2711 | |||
2712 | del_timer_sync(&priv->statistics_periodic); | ||
2713 | } | ||
2714 | |||
2715 | static void iwl4965_init_hw_rates(struct iwl_priv *priv, | ||
2716 | struct ieee80211_rate *rates) | ||
2717 | { | ||
2718 | int i; | ||
2719 | |||
2720 | for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) { | ||
2721 | rates[i].bitrate = iwlegacy_rates[i].ieee * 5; | ||
2722 | rates[i].hw_value = i; /* Rate scaling will work on indexes */ | ||
2723 | rates[i].hw_value_short = i; | ||
2724 | rates[i].flags = 0; | ||
2725 | if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) { | ||
2726 | /* | ||
2727 | * If CCK != 1M then set short preamble rate flag. | ||
2728 | */ | ||
2729 | rates[i].flags |= | ||
2730 | (iwlegacy_rates[i].plcp == IWL_RATE_1M_PLCP) ? | ||
2731 | 0 : IEEE80211_RATE_SHORT_PREAMBLE; | ||
2732 | } | ||
2733 | } | ||
2734 | } | ||
2735 | /* | ||
2736 | * Acquire priv->lock before calling this function ! | ||
2737 | */ | ||
2738 | void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index) | ||
2739 | { | ||
2740 | iwl_legacy_write_direct32(priv, HBUS_TARG_WRPTR, | ||
2741 | (index & 0xff) | (txq_id << 8)); | ||
2742 | iwl_legacy_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(txq_id), index); | ||
2743 | } | ||
2744 | |||
2745 | void iwl4965_tx_queue_set_status(struct iwl_priv *priv, | ||
2746 | struct iwl_tx_queue *txq, | ||
2747 | int tx_fifo_id, int scd_retry) | ||
2748 | { | ||
2749 | int txq_id = txq->q.id; | ||
2750 | |||
2751 | /* Find out whether to activate Tx queue */ | ||
2752 | int active = test_bit(txq_id, &priv->txq_ctx_active_msk) ? 1 : 0; | ||
2753 | |||
2754 | /* Set up and activate */ | ||
2755 | iwl_legacy_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id), | ||
2756 | (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | | ||
2757 | (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) | | ||
2758 | (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) | | ||
2759 | (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) | | ||
2760 | IWL49_SCD_QUEUE_STTS_REG_MSK); | ||
2761 | |||
2762 | txq->sched_retry = scd_retry; | ||
2763 | |||
2764 | IWL_DEBUG_INFO(priv, "%s %s Queue %d on AC %d\n", | ||
2765 | active ? "Activate" : "Deactivate", | ||
2766 | scd_retry ? "BA" : "AC", txq_id, tx_fifo_id); | ||
2767 | } | ||
2768 | |||
2769 | |||
2770 | static int iwl4965_init_drv(struct iwl_priv *priv) | ||
2771 | { | ||
2772 | int ret; | ||
2773 | |||
2774 | spin_lock_init(&priv->sta_lock); | ||
2775 | spin_lock_init(&priv->hcmd_lock); | ||
2776 | |||
2777 | INIT_LIST_HEAD(&priv->free_frames); | ||
2778 | |||
2779 | mutex_init(&priv->mutex); | ||
2780 | |||
2781 | priv->ieee_channels = NULL; | ||
2782 | priv->ieee_rates = NULL; | ||
2783 | priv->band = IEEE80211_BAND_2GHZ; | ||
2784 | |||
2785 | priv->iw_mode = NL80211_IFTYPE_STATION; | ||
2786 | priv->current_ht_config.smps = IEEE80211_SMPS_STATIC; | ||
2787 | priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF; | ||
2788 | |||
2789 | /* initialize force reset */ | ||
2790 | priv->force_reset.reset_duration = IWL_DELAY_NEXT_FORCE_FW_RELOAD; | ||
2791 | |||
2792 | /* Choose which receivers/antennas to use */ | ||
2793 | if (priv->cfg->ops->hcmd->set_rxon_chain) | ||
2794 | priv->cfg->ops->hcmd->set_rxon_chain(priv, | ||
2795 | &priv->contexts[IWL_RXON_CTX_BSS]); | ||
2796 | |||
2797 | iwl_legacy_init_scan_params(priv); | ||
2798 | |||
2799 | ret = iwl_legacy_init_channel_map(priv); | ||
2800 | if (ret) { | ||
2801 | IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); | ||
2802 | goto err; | ||
2803 | } | ||
2804 | |||
2805 | ret = iwl_legacy_init_geos(priv); | ||
2806 | if (ret) { | ||
2807 | IWL_ERR(priv, "initializing geos failed: %d\n", ret); | ||
2808 | goto err_free_channel_map; | ||
2809 | } | ||
2810 | iwl4965_init_hw_rates(priv, priv->ieee_rates); | ||
2811 | |||
2812 | return 0; | ||
2813 | |||
2814 | err_free_channel_map: | ||
2815 | iwl_legacy_free_channel_map(priv); | ||
2816 | err: | ||
2817 | return ret; | ||
2818 | } | ||
2819 | |||
2820 | static void iwl4965_uninit_drv(struct iwl_priv *priv) | ||
2821 | { | ||
2822 | iwl4965_calib_free_results(priv); | ||
2823 | iwl_legacy_free_geos(priv); | ||
2824 | iwl_legacy_free_channel_map(priv); | ||
2825 | kfree(priv->scan_cmd); | ||
2826 | } | ||
2827 | |||
2828 | static void iwl4965_hw_detect(struct iwl_priv *priv) | ||
2829 | { | ||
2830 | priv->hw_rev = _iwl_legacy_read32(priv, CSR_HW_REV); | ||
2831 | priv->hw_wa_rev = _iwl_legacy_read32(priv, CSR_HW_REV_WA_REG); | ||
2832 | priv->rev_id = priv->pci_dev->revision; | ||
2833 | IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", priv->rev_id); | ||
2834 | } | ||
2835 | |||
2836 | static int iwl4965_set_hw_params(struct iwl_priv *priv) | ||
2837 | { | ||
2838 | priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; | ||
2839 | priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; | ||
2840 | if (priv->cfg->mod_params->amsdu_size_8K) | ||
2841 | priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K); | ||
2842 | else | ||
2843 | priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K); | ||
2844 | |||
2845 | priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL; | ||
2846 | |||
2847 | if (priv->cfg->mod_params->disable_11n) | ||
2848 | priv->cfg->sku &= ~IWL_SKU_N; | ||
2849 | |||
2850 | /* Device-specific setup */ | ||
2851 | return priv->cfg->ops->lib->set_hw_params(priv); | ||
2852 | } | ||
2853 | |||
2854 | static const u8 iwl4965_bss_ac_to_fifo[] = { | ||
2855 | IWL_TX_FIFO_VO, | ||
2856 | IWL_TX_FIFO_VI, | ||
2857 | IWL_TX_FIFO_BE, | ||
2858 | IWL_TX_FIFO_BK, | ||
2859 | }; | ||
2860 | |||
2861 | static const u8 iwl4965_bss_ac_to_queue[] = { | ||
2862 | 0, 1, 2, 3, | ||
2863 | }; | ||
2864 | |||
2865 | static int | ||
2866 | iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | ||
2867 | { | ||
2868 | int err = 0, i; | ||
2869 | struct iwl_priv *priv; | ||
2870 | struct ieee80211_hw *hw; | ||
2871 | struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); | ||
2872 | unsigned long flags; | ||
2873 | u16 pci_cmd; | ||
2874 | |||
2875 | /************************ | ||
2876 | * 1. Allocating HW data | ||
2877 | ************************/ | ||
2878 | |||
2879 | hw = iwl_legacy_alloc_all(cfg); | ||
2880 | if (!hw) { | ||
2881 | err = -ENOMEM; | ||
2882 | goto out; | ||
2883 | } | ||
2884 | priv = hw->priv; | ||
2885 | /* At this point both hw and priv are allocated. */ | ||
2886 | |||
2887 | /* | ||
2888 | * The default context is always valid, | ||
2889 | * more may be discovered when firmware | ||
2890 | * is loaded. | ||
2891 | */ | ||
2892 | priv->valid_contexts = BIT(IWL_RXON_CTX_BSS); | ||
2893 | |||
2894 | for (i = 0; i < NUM_IWL_RXON_CTX; i++) | ||
2895 | priv->contexts[i].ctxid = i; | ||
2896 | |||
2897 | priv->contexts[IWL_RXON_CTX_BSS].always_active = true; | ||
2898 | priv->contexts[IWL_RXON_CTX_BSS].is_active = true; | ||
2899 | priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON; | ||
2900 | priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING; | ||
2901 | priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC; | ||
2902 | priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM; | ||
2903 | priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID; | ||
2904 | priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY; | ||
2905 | priv->contexts[IWL_RXON_CTX_BSS].ac_to_fifo = iwl4965_bss_ac_to_fifo; | ||
2906 | priv->contexts[IWL_RXON_CTX_BSS].ac_to_queue = iwl4965_bss_ac_to_queue; | ||
2907 | priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes = | ||
2908 | BIT(NL80211_IFTYPE_ADHOC); | ||
2909 | priv->contexts[IWL_RXON_CTX_BSS].interface_modes = | ||
2910 | BIT(NL80211_IFTYPE_STATION); | ||
2911 | priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP; | ||
2912 | priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS; | ||
2913 | priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS; | ||
2914 | priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS; | ||
2915 | |||
2916 | BUILD_BUG_ON(NUM_IWL_RXON_CTX != 1); | ||
2917 | |||
2918 | SET_IEEE80211_DEV(hw, &pdev->dev); | ||
2919 | |||
2920 | IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n"); | ||
2921 | priv->cfg = cfg; | ||
2922 | priv->pci_dev = pdev; | ||
2923 | priv->inta_mask = CSR_INI_SET_MASK; | ||
2924 | |||
2925 | if (iwl_legacy_alloc_traffic_mem(priv)) | ||
2926 | IWL_ERR(priv, "Not enough memory to generate traffic log\n"); | ||
2927 | |||
2928 | /************************** | ||
2929 | * 2. Initializing PCI bus | ||
2930 | **************************/ | ||
2931 | pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | | ||
2932 | PCIE_LINK_STATE_CLKPM); | ||
2933 | |||
2934 | if (pci_enable_device(pdev)) { | ||
2935 | err = -ENODEV; | ||
2936 | goto out_ieee80211_free_hw; | ||
2937 | } | ||
2938 | |||
2939 | pci_set_master(pdev); | ||
2940 | |||
2941 | err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); | ||
2942 | if (!err) | ||
2943 | err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36)); | ||
2944 | if (err) { | ||
2945 | err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); | ||
2946 | if (!err) | ||
2947 | err = pci_set_consistent_dma_mask(pdev, | ||
2948 | DMA_BIT_MASK(32)); | ||
2949 | /* both attempts failed: */ | ||
2950 | if (err) { | ||
2951 | IWL_WARN(priv, "No suitable DMA available.\n"); | ||
2952 | goto out_pci_disable_device; | ||
2953 | } | ||
2954 | } | ||
2955 | |||
2956 | err = pci_request_regions(pdev, DRV_NAME); | ||
2957 | if (err) | ||
2958 | goto out_pci_disable_device; | ||
2959 | |||
2960 | pci_set_drvdata(pdev, priv); | ||
2961 | |||
2962 | |||
2963 | /*********************** | ||
2964 | * 3. Read REV register | ||
2965 | ***********************/ | ||
2966 | priv->hw_base = pci_iomap(pdev, 0, 0); | ||
2967 | if (!priv->hw_base) { | ||
2968 | err = -ENODEV; | ||
2969 | goto out_pci_release_regions; | ||
2970 | } | ||
2971 | |||
2972 | IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n", | ||
2973 | (unsigned long long) pci_resource_len(pdev, 0)); | ||
2974 | IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base); | ||
2975 | |||
2976 | /* these spin locks will be used in apm_ops.init and EEPROM access | ||
2977 | * we should init now | ||
2978 | */ | ||
2979 | spin_lock_init(&priv->reg_lock); | ||
2980 | spin_lock_init(&priv->lock); | ||
2981 | |||
2982 | /* | ||
2983 | * stop and reset the on-board processor just in case it is in a | ||
2984 | * strange state ... like being left stranded by a primary kernel | ||
2985 | * and this is now the kdump kernel trying to start up | ||
2986 | */ | ||
2987 | iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); | ||
2988 | |||
2989 | iwl4965_hw_detect(priv); | ||
2990 | IWL_INFO(priv, "Detected %s, REV=0x%X\n", | ||
2991 | priv->cfg->name, priv->hw_rev); | ||
2992 | |||
2993 | /* We disable the RETRY_TIMEOUT register (0x41) to keep | ||
2994 | * PCI Tx retries from interfering with C3 CPU state */ | ||
2995 | pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); | ||
2996 | |||
2997 | iwl4965_prepare_card_hw(priv); | ||
2998 | if (!priv->hw_ready) { | ||
2999 | IWL_WARN(priv, "Failed, HW not ready\n"); | ||
3000 | goto out_iounmap; | ||
3001 | } | ||
3002 | |||
3003 | /***************** | ||
3004 | * 4. Read EEPROM | ||
3005 | *****************/ | ||
3006 | /* Read the EEPROM */ | ||
3007 | err = iwl_legacy_eeprom_init(priv); | ||
3008 | if (err) { | ||
3009 | IWL_ERR(priv, "Unable to init EEPROM\n"); | ||
3010 | goto out_iounmap; | ||
3011 | } | ||
3012 | err = iwl4965_eeprom_check_version(priv); | ||
3013 | if (err) | ||
3014 | goto out_free_eeprom; | ||
3015 | |||
3016 | if (err) | ||
3017 | goto out_free_eeprom; | ||
3018 | |||
3019 | /* extract MAC Address */ | ||
3020 | iwl4965_eeprom_get_mac(priv, priv->addresses[0].addr); | ||
3021 | IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr); | ||
3022 | priv->hw->wiphy->addresses = priv->addresses; | ||
3023 | priv->hw->wiphy->n_addresses = 1; | ||
3024 | |||
3025 | /************************ | ||
3026 | * 5. Setup HW constants | ||
3027 | ************************/ | ||
3028 | if (iwl4965_set_hw_params(priv)) { | ||
3029 | IWL_ERR(priv, "failed to set hw parameters\n"); | ||
3030 | goto out_free_eeprom; | ||
3031 | } | ||
3032 | |||
3033 | /******************* | ||
3034 | * 6. Setup priv | ||
3035 | *******************/ | ||
3036 | |||
3037 | err = iwl4965_init_drv(priv); | ||
3038 | if (err) | ||
3039 | goto out_free_eeprom; | ||
3040 | /* At this point both hw and priv are initialized. */ | ||
3041 | |||
3042 | /******************** | ||
3043 | * 7. Setup services | ||
3044 | ********************/ | ||
3045 | spin_lock_irqsave(&priv->lock, flags); | ||
3046 | iwl_legacy_disable_interrupts(priv); | ||
3047 | spin_unlock_irqrestore(&priv->lock, flags); | ||
3048 | |||
3049 | pci_enable_msi(priv->pci_dev); | ||
3050 | |||
3051 | err = request_irq(priv->pci_dev->irq, iwl_legacy_isr, | ||
3052 | IRQF_SHARED, DRV_NAME, priv); | ||
3053 | if (err) { | ||
3054 | IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq); | ||
3055 | goto out_disable_msi; | ||
3056 | } | ||
3057 | |||
3058 | iwl4965_setup_deferred_work(priv); | ||
3059 | iwl4965_setup_rx_handlers(priv); | ||
3060 | |||
3061 | /********************************************* | ||
3062 | * 8. Enable interrupts and read RFKILL state | ||
3063 | *********************************************/ | ||
3064 | |||
3065 | /* enable rfkill interrupt: hw bug w/a */ | ||
3066 | pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd); | ||
3067 | if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { | ||
3068 | pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; | ||
3069 | pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd); | ||
3070 | } | ||
3071 | |||
3072 | iwl_legacy_enable_rfkill_int(priv); | ||
3073 | |||
3074 | /* If platform's RF_KILL switch is NOT set to KILL */ | ||
3075 | if (iwl_read32(priv, CSR_GP_CNTRL) & | ||
3076 | CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) | ||
3077 | clear_bit(STATUS_RF_KILL_HW, &priv->status); | ||
3078 | else | ||
3079 | set_bit(STATUS_RF_KILL_HW, &priv->status); | ||
3080 | |||
3081 | wiphy_rfkill_set_hw_state(priv->hw->wiphy, | ||
3082 | test_bit(STATUS_RF_KILL_HW, &priv->status)); | ||
3083 | |||
3084 | iwl_legacy_power_initialize(priv); | ||
3085 | |||
3086 | init_completion(&priv->_4965.firmware_loading_complete); | ||
3087 | |||
3088 | err = iwl4965_request_firmware(priv, true); | ||
3089 | if (err) | ||
3090 | goto out_destroy_workqueue; | ||
3091 | |||
3092 | return 0; | ||
3093 | |||
3094 | out_destroy_workqueue: | ||
3095 | destroy_workqueue(priv->workqueue); | ||
3096 | priv->workqueue = NULL; | ||
3097 | free_irq(priv->pci_dev->irq, priv); | ||
3098 | out_disable_msi: | ||
3099 | pci_disable_msi(priv->pci_dev); | ||
3100 | iwl4965_uninit_drv(priv); | ||
3101 | out_free_eeprom: | ||
3102 | iwl_legacy_eeprom_free(priv); | ||
3103 | out_iounmap: | ||
3104 | pci_iounmap(pdev, priv->hw_base); | ||
3105 | out_pci_release_regions: | ||
3106 | pci_set_drvdata(pdev, NULL); | ||
3107 | pci_release_regions(pdev); | ||
3108 | out_pci_disable_device: | ||
3109 | pci_disable_device(pdev); | ||
3110 | out_ieee80211_free_hw: | ||
3111 | iwl_legacy_free_traffic_mem(priv); | ||
3112 | ieee80211_free_hw(priv->hw); | ||
3113 | out: | ||
3114 | return err; | ||
3115 | } | ||
3116 | |||
3117 | static void __devexit iwl4965_pci_remove(struct pci_dev *pdev) | ||
3118 | { | ||
3119 | struct iwl_priv *priv = pci_get_drvdata(pdev); | ||
3120 | unsigned long flags; | ||
3121 | |||
3122 | if (!priv) | ||
3123 | return; | ||
3124 | |||
3125 | wait_for_completion(&priv->_4965.firmware_loading_complete); | ||
3126 | |||
3127 | IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n"); | ||
3128 | |||
3129 | iwl_legacy_dbgfs_unregister(priv); | ||
3130 | sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group); | ||
3131 | |||
3132 | /* ieee80211_unregister_hw call wil cause iwl_mac_stop to | ||
3133 | * to be called and iwl4965_down since we are removing the device | ||
3134 | * we need to set STATUS_EXIT_PENDING bit. | ||
3135 | */ | ||
3136 | set_bit(STATUS_EXIT_PENDING, &priv->status); | ||
3137 | |||
3138 | iwl_legacy_leds_exit(priv); | ||
3139 | |||
3140 | if (priv->mac80211_registered) { | ||
3141 | ieee80211_unregister_hw(priv->hw); | ||
3142 | priv->mac80211_registered = 0; | ||
3143 | } else { | ||
3144 | iwl4965_down(priv); | ||
3145 | } | ||
3146 | |||
3147 | /* | ||
3148 | * Make sure device is reset to low power before unloading driver. | ||
3149 | * This may be redundant with iwl4965_down(), but there are paths to | ||
3150 | * run iwl4965_down() without calling apm_ops.stop(), and there are | ||
3151 | * paths to avoid running iwl4965_down() at all before leaving driver. | ||
3152 | * This (inexpensive) call *makes sure* device is reset. | ||
3153 | */ | ||
3154 | iwl_legacy_apm_stop(priv); | ||
3155 | |||
3156 | /* make sure we flush any pending irq or | ||
3157 | * tasklet for the driver | ||
3158 | */ | ||
3159 | spin_lock_irqsave(&priv->lock, flags); | ||
3160 | iwl_legacy_disable_interrupts(priv); | ||
3161 | spin_unlock_irqrestore(&priv->lock, flags); | ||
3162 | |||
3163 | iwl4965_synchronize_irq(priv); | ||
3164 | |||
3165 | iwl4965_dealloc_ucode_pci(priv); | ||
3166 | |||
3167 | if (priv->rxq.bd) | ||
3168 | iwl4965_rx_queue_free(priv, &priv->rxq); | ||
3169 | iwl4965_hw_txq_ctx_free(priv); | ||
3170 | |||
3171 | iwl_legacy_eeprom_free(priv); | ||
3172 | |||
3173 | |||
3174 | /*netif_stop_queue(dev); */ | ||
3175 | flush_workqueue(priv->workqueue); | ||
3176 | |||
3177 | /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes | ||
3178 | * priv->workqueue... so we can't take down the workqueue | ||
3179 | * until now... */ | ||
3180 | destroy_workqueue(priv->workqueue); | ||
3181 | priv->workqueue = NULL; | ||
3182 | iwl_legacy_free_traffic_mem(priv); | ||
3183 | |||
3184 | free_irq(priv->pci_dev->irq, priv); | ||
3185 | pci_disable_msi(priv->pci_dev); | ||
3186 | pci_iounmap(pdev, priv->hw_base); | ||
3187 | pci_release_regions(pdev); | ||
3188 | pci_disable_device(pdev); | ||
3189 | pci_set_drvdata(pdev, NULL); | ||
3190 | |||
3191 | iwl4965_uninit_drv(priv); | ||
3192 | |||
3193 | dev_kfree_skb(priv->beacon_skb); | ||
3194 | |||
3195 | ieee80211_free_hw(priv->hw); | ||
3196 | } | ||
3197 | |||
3198 | /* | ||
3199 | * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask | ||
3200 | * must be called under priv->lock and mac access | ||
3201 | */ | ||
3202 | void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask) | ||
3203 | { | ||
3204 | iwl_legacy_write_prph(priv, IWL49_SCD_TXFACT, mask); | ||
3205 | } | ||
3206 | |||
3207 | /***************************************************************************** | ||
3208 | * | ||
3209 | * driver and module entry point | ||
3210 | * | ||
3211 | *****************************************************************************/ | ||
3212 | |||
3213 | /* Hardware specific file defines the PCI IDs table for that hardware module */ | ||
3214 | static DEFINE_PCI_DEVICE_TABLE(iwl4965_hw_card_ids) = { | ||
3215 | #if defined(CONFIG_IWL4965_MODULE) || defined(CONFIG_IWL4965) | ||
3216 | {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_cfg)}, | ||
3217 | {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_cfg)}, | ||
3218 | #endif /* CONFIG_IWL4965 */ | ||
3219 | |||
3220 | {0} | ||
3221 | }; | ||
3222 | MODULE_DEVICE_TABLE(pci, iwl4965_hw_card_ids); | ||
3223 | |||
3224 | static struct pci_driver iwl4965_driver = { | ||
3225 | .name = DRV_NAME, | ||
3226 | .id_table = iwl4965_hw_card_ids, | ||
3227 | .probe = iwl4965_pci_probe, | ||
3228 | .remove = __devexit_p(iwl4965_pci_remove), | ||
3229 | .driver.pm = IWL_LEGACY_PM_OPS, | ||
3230 | }; | ||
3231 | |||
3232 | static int __init iwl4965_init(void) | ||
3233 | { | ||
3234 | |||
3235 | int ret; | ||
3236 | pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); | ||
3237 | pr_info(DRV_COPYRIGHT "\n"); | ||
3238 | |||
3239 | ret = iwl4965_rate_control_register(); | ||
3240 | if (ret) { | ||
3241 | pr_err("Unable to register rate control algorithm: %d\n", ret); | ||
3242 | return ret; | ||
3243 | } | ||
3244 | |||
3245 | ret = pci_register_driver(&iwl4965_driver); | ||
3246 | if (ret) { | ||
3247 | pr_err("Unable to initialize PCI module\n"); | ||
3248 | goto error_register; | ||
3249 | } | ||
3250 | |||
3251 | return ret; | ||
3252 | |||
3253 | error_register: | ||
3254 | iwl4965_rate_control_unregister(); | ||
3255 | return ret; | ||
3256 | } | ||
3257 | |||
3258 | static void __exit iwl4965_exit(void) | ||
3259 | { | ||
3260 | pci_unregister_driver(&iwl4965_driver); | ||
3261 | iwl4965_rate_control_unregister(); | ||
3262 | } | ||
3263 | |||
3264 | module_exit(iwl4965_exit); | ||
3265 | module_init(iwl4965_init); | ||
3266 | |||
3267 | #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG | ||
3268 | module_param_named(debug, iwlegacy_debug_level, uint, S_IRUGO | S_IWUSR); | ||
3269 | MODULE_PARM_DESC(debug, "debug output mask"); | ||
3270 | #endif | ||
3271 | |||
3272 | module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, S_IRUGO); | ||
3273 | MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); | ||
3274 | module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, S_IRUGO); | ||
3275 | MODULE_PARM_DESC(queues_num, "number of hw queues."); | ||
3276 | module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, S_IRUGO); | ||
3277 | MODULE_PARM_DESC(11n_disable, "disable 11n functionality"); | ||
3278 | module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K, | ||
3279 | int, S_IRUGO); | ||
3280 | MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size"); | ||
3281 | module_param_named(fw_restart, iwl4965_mod_params.restart_fw, int, S_IRUGO); | ||
3282 | MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); | ||