diff options
Diffstat (limited to 'drivers/net/arm/ether1.c')
-rw-r--r-- | drivers/net/arm/ether1.c | 1094 |
1 files changed, 1094 insertions, 0 deletions
diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c new file mode 100644 index 00000000000..b00781c02d5 --- /dev/null +++ b/drivers/net/arm/ether1.c | |||
@@ -0,0 +1,1094 @@ | |||
1 | /* | ||
2 | * linux/drivers/acorn/net/ether1.c | ||
3 | * | ||
4 | * Copyright (C) 1996-2000 Russell King | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify | ||
7 | * it under the terms of the GNU General Public License version 2 as | ||
8 | * published by the Free Software Foundation. | ||
9 | * | ||
10 | * Acorn ether1 driver (82586 chip) for Acorn machines | ||
11 | * | ||
12 | * We basically keep two queues in the cards memory - one for transmit | ||
13 | * and one for receive. Each has a head and a tail. The head is where | ||
14 | * we/the chip adds packets to be transmitted/received, and the tail | ||
15 | * is where the transmitter has got to/where the receiver will stop. | ||
16 | * Both of these queues are circular, and since the chip is running | ||
17 | * all the time, we have to be careful when we modify the pointers etc | ||
18 | * so that the buffer memory contents is valid all the time. | ||
19 | * | ||
20 | * Change log: | ||
21 | * 1.00 RMK Released | ||
22 | * 1.01 RMK 19/03/1996 Transfers the last odd byte onto/off of the card now. | ||
23 | * 1.02 RMK 25/05/1997 Added code to restart RU if it goes not ready | ||
24 | * 1.03 RMK 14/09/1997 Cleaned up the handling of a reset during the TX interrupt. | ||
25 | * Should prevent lockup. | ||
26 | * 1.04 RMK 17/09/1997 Added more info when initialsation of chip goes wrong. | ||
27 | * TDR now only reports failure when chip reports non-zero | ||
28 | * TDR time-distance. | ||
29 | * 1.05 RMK 31/12/1997 Removed calls to dev_tint for 2.1 | ||
30 | * 1.06 RMK 10/02/2000 Updated for 2.3.43 | ||
31 | * 1.07 RMK 13/05/2000 Updated for 2.3.99-pre8 | ||
32 | */ | ||
33 | |||
34 | #include <linux/module.h> | ||
35 | #include <linux/kernel.h> | ||
36 | #include <linux/types.h> | ||
37 | #include <linux/fcntl.h> | ||
38 | #include <linux/interrupt.h> | ||
39 | #include <linux/ioport.h> | ||
40 | #include <linux/in.h> | ||
41 | #include <linux/slab.h> | ||
42 | #include <linux/string.h> | ||
43 | #include <linux/errno.h> | ||
44 | #include <linux/device.h> | ||
45 | #include <linux/init.h> | ||
46 | #include <linux/netdevice.h> | ||
47 | #include <linux/etherdevice.h> | ||
48 | #include <linux/skbuff.h> | ||
49 | #include <linux/bitops.h> | ||
50 | |||
51 | #include <asm/system.h> | ||
52 | #include <asm/io.h> | ||
53 | #include <asm/dma.h> | ||
54 | #include <asm/ecard.h> | ||
55 | |||
56 | #define __ETHER1_C | ||
57 | #include "ether1.h" | ||
58 | |||
59 | static unsigned int net_debug = NET_DEBUG; | ||
60 | |||
61 | #define BUFFER_SIZE 0x10000 | ||
62 | #define TX_AREA_START 0x00100 | ||
63 | #define TX_AREA_END 0x05000 | ||
64 | #define RX_AREA_START 0x05000 | ||
65 | #define RX_AREA_END 0x0fc00 | ||
66 | |||
67 | static int ether1_open(struct net_device *dev); | ||
68 | static int ether1_sendpacket(struct sk_buff *skb, struct net_device *dev); | ||
69 | static irqreturn_t ether1_interrupt(int irq, void *dev_id); | ||
70 | static int ether1_close(struct net_device *dev); | ||
71 | static void ether1_setmulticastlist(struct net_device *dev); | ||
72 | static void ether1_timeout(struct net_device *dev); | ||
73 | |||
74 | /* ------------------------------------------------------------------------- */ | ||
75 | |||
76 | static char version[] __devinitdata = "ether1 ethernet driver (c) 2000 Russell King v1.07\n"; | ||
77 | |||
78 | #define BUS_16 16 | ||
79 | #define BUS_8 8 | ||
80 | |||
81 | /* ------------------------------------------------------------------------- */ | ||
82 | |||
83 | #define DISABLEIRQS 1 | ||
84 | #define NORMALIRQS 0 | ||
85 | |||
86 | #define ether1_readw(dev, addr, type, offset, svflgs) ether1_inw_p (dev, addr + (int)(&((type *)0)->offset), svflgs) | ||
87 | #define ether1_writew(dev, val, addr, type, offset, svflgs) ether1_outw_p (dev, val, addr + (int)(&((type *)0)->offset), svflgs) | ||
88 | |||
89 | static inline unsigned short | ||
90 | ether1_inw_p (struct net_device *dev, int addr, int svflgs) | ||
91 | { | ||
92 | unsigned long flags; | ||
93 | unsigned short ret; | ||
94 | |||
95 | if (svflgs) | ||
96 | local_irq_save (flags); | ||
97 | |||
98 | writeb(addr >> 12, REG_PAGE); | ||
99 | ret = readw(ETHER1_RAM + ((addr & 4095) << 1)); | ||
100 | if (svflgs) | ||
101 | local_irq_restore (flags); | ||
102 | return ret; | ||
103 | } | ||
104 | |||
105 | static inline void | ||
106 | ether1_outw_p (struct net_device *dev, unsigned short val, int addr, int svflgs) | ||
107 | { | ||
108 | unsigned long flags; | ||
109 | |||
110 | if (svflgs) | ||
111 | local_irq_save (flags); | ||
112 | |||
113 | writeb(addr >> 12, REG_PAGE); | ||
114 | writew(val, ETHER1_RAM + ((addr & 4095) << 1)); | ||
115 | if (svflgs) | ||
116 | local_irq_restore (flags); | ||
117 | } | ||
118 | |||
119 | /* | ||
120 | * Some inline assembler to allow fast transfers on to/off of the card. | ||
121 | * Since this driver depends on some features presented by the ARM | ||
122 | * specific architecture, and that you can't configure this driver | ||
123 | * without specifiing ARM mode, this is not a problem. | ||
124 | * | ||
125 | * This routine is essentially an optimised memcpy from the card's | ||
126 | * onboard RAM to kernel memory. | ||
127 | */ | ||
128 | static void | ||
129 | ether1_writebuffer (struct net_device *dev, void *data, unsigned int start, unsigned int length) | ||
130 | { | ||
131 | unsigned int page, thislen, offset; | ||
132 | void __iomem *addr; | ||
133 | |||
134 | offset = start & 4095; | ||
135 | page = start >> 12; | ||
136 | addr = ETHER1_RAM + (offset << 1); | ||
137 | |||
138 | if (offset + length > 4096) | ||
139 | thislen = 4096 - offset; | ||
140 | else | ||
141 | thislen = length; | ||
142 | |||
143 | do { | ||
144 | int used; | ||
145 | |||
146 | writeb(page, REG_PAGE); | ||
147 | length -= thislen; | ||
148 | |||
149 | __asm__ __volatile__( | ||
150 | "subs %3, %3, #2\n\ | ||
151 | bmi 2f\n\ | ||
152 | 1: ldr %0, [%1], #2\n\ | ||
153 | mov %0, %0, lsl #16\n\ | ||
154 | orr %0, %0, %0, lsr #16\n\ | ||
155 | str %0, [%2], #4\n\ | ||
156 | subs %3, %3, #2\n\ | ||
157 | bmi 2f\n\ | ||
158 | ldr %0, [%1], #2\n\ | ||
159 | mov %0, %0, lsl #16\n\ | ||
160 | orr %0, %0, %0, lsr #16\n\ | ||
161 | str %0, [%2], #4\n\ | ||
162 | subs %3, %3, #2\n\ | ||
163 | bmi 2f\n\ | ||
164 | ldr %0, [%1], #2\n\ | ||
165 | mov %0, %0, lsl #16\n\ | ||
166 | orr %0, %0, %0, lsr #16\n\ | ||
167 | str %0, [%2], #4\n\ | ||
168 | subs %3, %3, #2\n\ | ||
169 | bmi 2f\n\ | ||
170 | ldr %0, [%1], #2\n\ | ||
171 | mov %0, %0, lsl #16\n\ | ||
172 | orr %0, %0, %0, lsr #16\n\ | ||
173 | str %0, [%2], #4\n\ | ||
174 | subs %3, %3, #2\n\ | ||
175 | bpl 1b\n\ | ||
176 | 2: adds %3, %3, #1\n\ | ||
177 | ldreqb %0, [%1]\n\ | ||
178 | streqb %0, [%2]" | ||
179 | : "=&r" (used), "=&r" (data) | ||
180 | : "r" (addr), "r" (thislen), "1" (data)); | ||
181 | |||
182 | addr = ETHER1_RAM; | ||
183 | |||
184 | thislen = length; | ||
185 | if (thislen > 4096) | ||
186 | thislen = 4096; | ||
187 | page++; | ||
188 | } while (thislen); | ||
189 | } | ||
190 | |||
191 | static void | ||
192 | ether1_readbuffer (struct net_device *dev, void *data, unsigned int start, unsigned int length) | ||
193 | { | ||
194 | unsigned int page, thislen, offset; | ||
195 | void __iomem *addr; | ||
196 | |||
197 | offset = start & 4095; | ||
198 | page = start >> 12; | ||
199 | addr = ETHER1_RAM + (offset << 1); | ||
200 | |||
201 | if (offset + length > 4096) | ||
202 | thislen = 4096 - offset; | ||
203 | else | ||
204 | thislen = length; | ||
205 | |||
206 | do { | ||
207 | int used; | ||
208 | |||
209 | writeb(page, REG_PAGE); | ||
210 | length -= thislen; | ||
211 | |||
212 | __asm__ __volatile__( | ||
213 | "subs %3, %3, #2\n\ | ||
214 | bmi 2f\n\ | ||
215 | 1: ldr %0, [%2], #4\n\ | ||
216 | strb %0, [%1], #1\n\ | ||
217 | mov %0, %0, lsr #8\n\ | ||
218 | strb %0, [%1], #1\n\ | ||
219 | subs %3, %3, #2\n\ | ||
220 | bmi 2f\n\ | ||
221 | ldr %0, [%2], #4\n\ | ||
222 | strb %0, [%1], #1\n\ | ||
223 | mov %0, %0, lsr #8\n\ | ||
224 | strb %0, [%1], #1\n\ | ||
225 | subs %3, %3, #2\n\ | ||
226 | bmi 2f\n\ | ||
227 | ldr %0, [%2], #4\n\ | ||
228 | strb %0, [%1], #1\n\ | ||
229 | mov %0, %0, lsr #8\n\ | ||
230 | strb %0, [%1], #1\n\ | ||
231 | subs %3, %3, #2\n\ | ||
232 | bmi 2f\n\ | ||
233 | ldr %0, [%2], #4\n\ | ||
234 | strb %0, [%1], #1\n\ | ||
235 | mov %0, %0, lsr #8\n\ | ||
236 | strb %0, [%1], #1\n\ | ||
237 | subs %3, %3, #2\n\ | ||
238 | bpl 1b\n\ | ||
239 | 2: adds %3, %3, #1\n\ | ||
240 | ldreqb %0, [%2]\n\ | ||
241 | streqb %0, [%1]" | ||
242 | : "=&r" (used), "=&r" (data) | ||
243 | : "r" (addr), "r" (thislen), "1" (data)); | ||
244 | |||
245 | addr = ETHER1_RAM; | ||
246 | |||
247 | thislen = length; | ||
248 | if (thislen > 4096) | ||
249 | thislen = 4096; | ||
250 | page++; | ||
251 | } while (thislen); | ||
252 | } | ||
253 | |||
254 | static int __devinit | ||
255 | ether1_ramtest(struct net_device *dev, unsigned char byte) | ||
256 | { | ||
257 | unsigned char *buffer = kmalloc (BUFFER_SIZE, GFP_KERNEL); | ||
258 | int i, ret = BUFFER_SIZE; | ||
259 | int max_errors = 15; | ||
260 | int bad = -1; | ||
261 | int bad_start = 0; | ||
262 | |||
263 | if (!buffer) | ||
264 | return 1; | ||
265 | |||
266 | memset (buffer, byte, BUFFER_SIZE); | ||
267 | ether1_writebuffer (dev, buffer, 0, BUFFER_SIZE); | ||
268 | memset (buffer, byte ^ 0xff, BUFFER_SIZE); | ||
269 | ether1_readbuffer (dev, buffer, 0, BUFFER_SIZE); | ||
270 | |||
271 | for (i = 0; i < BUFFER_SIZE; i++) { | ||
272 | if (buffer[i] != byte) { | ||
273 | if (max_errors >= 0 && bad != buffer[i]) { | ||
274 | if (bad != -1) | ||
275 | printk ("\n"); | ||
276 | printk (KERN_CRIT "%s: RAM failed with (%02X instead of %02X) at 0x%04X", | ||
277 | dev->name, buffer[i], byte, i); | ||
278 | ret = -ENODEV; | ||
279 | max_errors --; | ||
280 | bad = buffer[i]; | ||
281 | bad_start = i; | ||
282 | } | ||
283 | } else { | ||
284 | if (bad != -1) { | ||
285 | if (bad_start == i - 1) | ||
286 | printk ("\n"); | ||
287 | else | ||
288 | printk (" - 0x%04X\n", i - 1); | ||
289 | bad = -1; | ||
290 | } | ||
291 | } | ||
292 | } | ||
293 | |||
294 | if (bad != -1) | ||
295 | printk (" - 0x%04X\n", BUFFER_SIZE); | ||
296 | kfree (buffer); | ||
297 | |||
298 | return ret; | ||
299 | } | ||
300 | |||
301 | static int | ||
302 | ether1_reset (struct net_device *dev) | ||
303 | { | ||
304 | writeb(CTRL_RST|CTRL_ACK, REG_CONTROL); | ||
305 | return BUS_16; | ||
306 | } | ||
307 | |||
308 | static int __devinit | ||
309 | ether1_init_2(struct net_device *dev) | ||
310 | { | ||
311 | int i; | ||
312 | dev->mem_start = 0; | ||
313 | |||
314 | i = ether1_ramtest (dev, 0x5a); | ||
315 | |||
316 | if (i > 0) | ||
317 | i = ether1_ramtest (dev, 0x1e); | ||
318 | |||
319 | if (i <= 0) | ||
320 | return -ENODEV; | ||
321 | |||
322 | dev->mem_end = i; | ||
323 | return 0; | ||
324 | } | ||
325 | |||
326 | /* | ||
327 | * These are the structures that are loaded into the ether RAM card to | ||
328 | * initialise the 82586 | ||
329 | */ | ||
330 | |||
331 | /* at 0x0100 */ | ||
332 | #define NOP_ADDR (TX_AREA_START) | ||
333 | #define NOP_SIZE (0x06) | ||
334 | static nop_t init_nop = { | ||
335 | 0, | ||
336 | CMD_NOP, | ||
337 | NOP_ADDR | ||
338 | }; | ||
339 | |||
340 | /* at 0x003a */ | ||
341 | #define TDR_ADDR (0x003a) | ||
342 | #define TDR_SIZE (0x08) | ||
343 | static tdr_t init_tdr = { | ||
344 | 0, | ||
345 | CMD_TDR | CMD_INTR, | ||
346 | NOP_ADDR, | ||
347 | 0 | ||
348 | }; | ||
349 | |||
350 | /* at 0x002e */ | ||
351 | #define MC_ADDR (0x002e) | ||
352 | #define MC_SIZE (0x0c) | ||
353 | static mc_t init_mc = { | ||
354 | 0, | ||
355 | CMD_SETMULTICAST, | ||
356 | TDR_ADDR, | ||
357 | 0, | ||
358 | { { 0, } } | ||
359 | }; | ||
360 | |||
361 | /* at 0x0022 */ | ||
362 | #define SA_ADDR (0x0022) | ||
363 | #define SA_SIZE (0x0c) | ||
364 | static sa_t init_sa = { | ||
365 | 0, | ||
366 | CMD_SETADDRESS, | ||
367 | MC_ADDR, | ||
368 | { 0, } | ||
369 | }; | ||
370 | |||
371 | /* at 0x0010 */ | ||
372 | #define CFG_ADDR (0x0010) | ||
373 | #define CFG_SIZE (0x12) | ||
374 | static cfg_t init_cfg = { | ||
375 | 0, | ||
376 | CMD_CONFIG, | ||
377 | SA_ADDR, | ||
378 | 8, | ||
379 | 8, | ||
380 | CFG8_SRDY, | ||
381 | CFG9_PREAMB8 | CFG9_ADDRLENBUF | CFG9_ADDRLEN(6), | ||
382 | 0, | ||
383 | 0x60, | ||
384 | 0, | ||
385 | CFG13_RETRY(15) | CFG13_SLOTH(2), | ||
386 | 0, | ||
387 | }; | ||
388 | |||
389 | /* at 0x0000 */ | ||
390 | #define SCB_ADDR (0x0000) | ||
391 | #define SCB_SIZE (0x10) | ||
392 | static scb_t init_scb = { | ||
393 | 0, | ||
394 | SCB_CMDACKRNR | SCB_CMDACKCNA | SCB_CMDACKFR | SCB_CMDACKCX, | ||
395 | CFG_ADDR, | ||
396 | RX_AREA_START, | ||
397 | 0, | ||
398 | 0, | ||
399 | 0, | ||
400 | 0 | ||
401 | }; | ||
402 | |||
403 | /* at 0xffee */ | ||
404 | #define ISCP_ADDR (0xffee) | ||
405 | #define ISCP_SIZE (0x08) | ||
406 | static iscp_t init_iscp = { | ||
407 | 1, | ||
408 | SCB_ADDR, | ||
409 | 0x0000, | ||
410 | 0x0000 | ||
411 | }; | ||
412 | |||
413 | /* at 0xfff6 */ | ||
414 | #define SCP_ADDR (0xfff6) | ||
415 | #define SCP_SIZE (0x0a) | ||
416 | static scp_t init_scp = { | ||
417 | SCP_SY_16BBUS, | ||
418 | { 0, 0 }, | ||
419 | ISCP_ADDR, | ||
420 | 0 | ||
421 | }; | ||
422 | |||
423 | #define RFD_SIZE (0x16) | ||
424 | static rfd_t init_rfd = { | ||
425 | 0, | ||
426 | 0, | ||
427 | 0, | ||
428 | 0, | ||
429 | { 0, }, | ||
430 | { 0, }, | ||
431 | 0 | ||
432 | }; | ||
433 | |||
434 | #define RBD_SIZE (0x0a) | ||
435 | static rbd_t init_rbd = { | ||
436 | 0, | ||
437 | 0, | ||
438 | 0, | ||
439 | 0, | ||
440 | ETH_FRAME_LEN + 8 | ||
441 | }; | ||
442 | |||
443 | #define TX_SIZE (0x08) | ||
444 | #define TBD_SIZE (0x08) | ||
445 | |||
446 | static int | ||
447 | ether1_init_for_open (struct net_device *dev) | ||
448 | { | ||
449 | int i, status, addr, next, next2; | ||
450 | int failures = 0; | ||
451 | unsigned long timeout; | ||
452 | |||
453 | writeb(CTRL_RST|CTRL_ACK, REG_CONTROL); | ||
454 | |||
455 | for (i = 0; i < 6; i++) | ||
456 | init_sa.sa_addr[i] = dev->dev_addr[i]; | ||
457 | |||
458 | /* load data structures into ether1 RAM */ | ||
459 | ether1_writebuffer (dev, &init_scp, SCP_ADDR, SCP_SIZE); | ||
460 | ether1_writebuffer (dev, &init_iscp, ISCP_ADDR, ISCP_SIZE); | ||
461 | ether1_writebuffer (dev, &init_scb, SCB_ADDR, SCB_SIZE); | ||
462 | ether1_writebuffer (dev, &init_cfg, CFG_ADDR, CFG_SIZE); | ||
463 | ether1_writebuffer (dev, &init_sa, SA_ADDR, SA_SIZE); | ||
464 | ether1_writebuffer (dev, &init_mc, MC_ADDR, MC_SIZE); | ||
465 | ether1_writebuffer (dev, &init_tdr, TDR_ADDR, TDR_SIZE); | ||
466 | ether1_writebuffer (dev, &init_nop, NOP_ADDR, NOP_SIZE); | ||
467 | |||
468 | if (ether1_readw(dev, CFG_ADDR, cfg_t, cfg_command, NORMALIRQS) != CMD_CONFIG) { | ||
469 | printk (KERN_ERR "%s: detected either RAM fault or compiler bug\n", | ||
470 | dev->name); | ||
471 | return 1; | ||
472 | } | ||
473 | |||
474 | /* | ||
475 | * setup circularly linked list of { rfd, rbd, buffer }, with | ||
476 | * all rfds circularly linked, rbds circularly linked. | ||
477 | * First rfd is linked to scp, first rbd is linked to first | ||
478 | * rfd. Last rbd has a suspend command. | ||
479 | */ | ||
480 | addr = RX_AREA_START; | ||
481 | do { | ||
482 | next = addr + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10; | ||
483 | next2 = next + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10; | ||
484 | |||
485 | if (next2 >= RX_AREA_END) { | ||
486 | next = RX_AREA_START; | ||
487 | init_rfd.rfd_command = RFD_CMDEL | RFD_CMDSUSPEND; | ||
488 | priv(dev)->rx_tail = addr; | ||
489 | } else | ||
490 | init_rfd.rfd_command = 0; | ||
491 | if (addr == RX_AREA_START) | ||
492 | init_rfd.rfd_rbdoffset = addr + RFD_SIZE; | ||
493 | else | ||
494 | init_rfd.rfd_rbdoffset = 0; | ||
495 | init_rfd.rfd_link = next; | ||
496 | init_rbd.rbd_link = next + RFD_SIZE; | ||
497 | init_rbd.rbd_bufl = addr + RFD_SIZE + RBD_SIZE; | ||
498 | |||
499 | ether1_writebuffer (dev, &init_rfd, addr, RFD_SIZE); | ||
500 | ether1_writebuffer (dev, &init_rbd, addr + RFD_SIZE, RBD_SIZE); | ||
501 | addr = next; | ||
502 | } while (next2 < RX_AREA_END); | ||
503 | |||
504 | priv(dev)->tx_link = NOP_ADDR; | ||
505 | priv(dev)->tx_head = NOP_ADDR + NOP_SIZE; | ||
506 | priv(dev)->tx_tail = TDR_ADDR; | ||
507 | priv(dev)->rx_head = RX_AREA_START; | ||
508 | |||
509 | /* release reset & give 586 a prod */ | ||
510 | priv(dev)->resetting = 1; | ||
511 | priv(dev)->initialising = 1; | ||
512 | writeb(CTRL_RST, REG_CONTROL); | ||
513 | writeb(0, REG_CONTROL); | ||
514 | writeb(CTRL_CA, REG_CONTROL); | ||
515 | |||
516 | /* 586 should now unset iscp.busy */ | ||
517 | timeout = jiffies + HZ/2; | ||
518 | while (ether1_readw(dev, ISCP_ADDR, iscp_t, iscp_busy, DISABLEIRQS) == 1) { | ||
519 | if (time_after(jiffies, timeout)) { | ||
520 | printk (KERN_WARNING "%s: can't initialise 82586: iscp is busy\n", dev->name); | ||
521 | return 1; | ||
522 | } | ||
523 | } | ||
524 | |||
525 | /* check status of commands that we issued */ | ||
526 | timeout += HZ/10; | ||
527 | while (((status = ether1_readw(dev, CFG_ADDR, cfg_t, cfg_status, DISABLEIRQS)) | ||
528 | & STAT_COMPLETE) == 0) { | ||
529 | if (time_after(jiffies, timeout)) | ||
530 | break; | ||
531 | } | ||
532 | |||
533 | if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) { | ||
534 | printk (KERN_WARNING "%s: can't initialise 82586: config status %04X\n", dev->name, status); | ||
535 | printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, | ||
536 | ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS), | ||
537 | ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS), | ||
538 | ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS), | ||
539 | ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS)); | ||
540 | failures += 1; | ||
541 | } | ||
542 | |||
543 | timeout += HZ/10; | ||
544 | while (((status = ether1_readw(dev, SA_ADDR, sa_t, sa_status, DISABLEIRQS)) | ||
545 | & STAT_COMPLETE) == 0) { | ||
546 | if (time_after(jiffies, timeout)) | ||
547 | break; | ||
548 | } | ||
549 | |||
550 | if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) { | ||
551 | printk (KERN_WARNING "%s: can't initialise 82586: set address status %04X\n", dev->name, status); | ||
552 | printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, | ||
553 | ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS), | ||
554 | ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS), | ||
555 | ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS), | ||
556 | ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS)); | ||
557 | failures += 1; | ||
558 | } | ||
559 | |||
560 | timeout += HZ/10; | ||
561 | while (((status = ether1_readw(dev, MC_ADDR, mc_t, mc_status, DISABLEIRQS)) | ||
562 | & STAT_COMPLETE) == 0) { | ||
563 | if (time_after(jiffies, timeout)) | ||
564 | break; | ||
565 | } | ||
566 | |||
567 | if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) { | ||
568 | printk (KERN_WARNING "%s: can't initialise 82586: set multicast status %04X\n", dev->name, status); | ||
569 | printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, | ||
570 | ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS), | ||
571 | ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS), | ||
572 | ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS), | ||
573 | ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS)); | ||
574 | failures += 1; | ||
575 | } | ||
576 | |||
577 | timeout += HZ; | ||
578 | while (((status = ether1_readw(dev, TDR_ADDR, tdr_t, tdr_status, DISABLEIRQS)) | ||
579 | & STAT_COMPLETE) == 0) { | ||
580 | if (time_after(jiffies, timeout)) | ||
581 | break; | ||
582 | } | ||
583 | |||
584 | if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) { | ||
585 | printk (KERN_WARNING "%s: can't tdr (ignored)\n", dev->name); | ||
586 | printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, | ||
587 | ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS), | ||
588 | ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS), | ||
589 | ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS), | ||
590 | ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS)); | ||
591 | } else { | ||
592 | status = ether1_readw(dev, TDR_ADDR, tdr_t, tdr_result, DISABLEIRQS); | ||
593 | if (status & TDR_XCVRPROB) | ||
594 | printk (KERN_WARNING "%s: i/f failed tdr: transceiver problem\n", dev->name); | ||
595 | else if ((status & (TDR_SHORT|TDR_OPEN)) && (status & TDR_TIME)) { | ||
596 | #ifdef FANCY | ||
597 | printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d.%d us away\n", dev->name, | ||
598 | status & TDR_SHORT ? "short" : "open", (status & TDR_TIME) / 10, | ||
599 | (status & TDR_TIME) % 10); | ||
600 | #else | ||
601 | printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d clks away\n", dev->name, | ||
602 | status & TDR_SHORT ? "short" : "open", (status & TDR_TIME)); | ||
603 | #endif | ||
604 | } | ||
605 | } | ||
606 | |||
607 | if (failures) | ||
608 | ether1_reset (dev); | ||
609 | return failures ? 1 : 0; | ||
610 | } | ||
611 | |||
612 | /* ------------------------------------------------------------------------- */ | ||
613 | |||
614 | static int | ||
615 | ether1_txalloc (struct net_device *dev, int size) | ||
616 | { | ||
617 | int start, tail; | ||
618 | |||
619 | size = (size + 1) & ~1; | ||
620 | tail = priv(dev)->tx_tail; | ||
621 | |||
622 | if (priv(dev)->tx_head + size > TX_AREA_END) { | ||
623 | if (tail > priv(dev)->tx_head) | ||
624 | return -1; | ||
625 | start = TX_AREA_START; | ||
626 | if (start + size > tail) | ||
627 | return -1; | ||
628 | priv(dev)->tx_head = start + size; | ||
629 | } else { | ||
630 | if (priv(dev)->tx_head < tail && (priv(dev)->tx_head + size) > tail) | ||
631 | return -1; | ||
632 | start = priv(dev)->tx_head; | ||
633 | priv(dev)->tx_head += size; | ||
634 | } | ||
635 | |||
636 | return start; | ||
637 | } | ||
638 | |||
639 | static int | ||
640 | ether1_open (struct net_device *dev) | ||
641 | { | ||
642 | if (!is_valid_ether_addr(dev->dev_addr)) { | ||
643 | printk(KERN_WARNING "%s: invalid ethernet MAC address\n", | ||
644 | dev->name); | ||
645 | return -EINVAL; | ||
646 | } | ||
647 | |||
648 | if (request_irq(dev->irq, ether1_interrupt, 0, "ether1", dev)) | ||
649 | return -EAGAIN; | ||
650 | |||
651 | if (ether1_init_for_open (dev)) { | ||
652 | free_irq (dev->irq, dev); | ||
653 | return -EAGAIN; | ||
654 | } | ||
655 | |||
656 | netif_start_queue(dev); | ||
657 | |||
658 | return 0; | ||
659 | } | ||
660 | |||
661 | static void | ||
662 | ether1_timeout(struct net_device *dev) | ||
663 | { | ||
664 | printk(KERN_WARNING "%s: transmit timeout, network cable problem?\n", | ||
665 | dev->name); | ||
666 | printk(KERN_WARNING "%s: resetting device\n", dev->name); | ||
667 | |||
668 | ether1_reset (dev); | ||
669 | |||
670 | if (ether1_init_for_open (dev)) | ||
671 | printk (KERN_ERR "%s: unable to restart interface\n", dev->name); | ||
672 | |||
673 | dev->stats.tx_errors++; | ||
674 | netif_wake_queue(dev); | ||
675 | } | ||
676 | |||
677 | static int | ||
678 | ether1_sendpacket (struct sk_buff *skb, struct net_device *dev) | ||
679 | { | ||
680 | int tmp, tst, nopaddr, txaddr, tbdaddr, dataddr; | ||
681 | unsigned long flags; | ||
682 | tx_t tx; | ||
683 | tbd_t tbd; | ||
684 | nop_t nop; | ||
685 | |||
686 | if (priv(dev)->restart) { | ||
687 | printk(KERN_WARNING "%s: resetting device\n", dev->name); | ||
688 | |||
689 | ether1_reset(dev); | ||
690 | |||
691 | if (ether1_init_for_open(dev)) | ||
692 | printk(KERN_ERR "%s: unable to restart interface\n", dev->name); | ||
693 | else | ||
694 | priv(dev)->restart = 0; | ||
695 | } | ||
696 | |||
697 | if (skb->len < ETH_ZLEN) { | ||
698 | if (skb_padto(skb, ETH_ZLEN)) | ||
699 | goto out; | ||
700 | } | ||
701 | |||
702 | /* | ||
703 | * insert packet followed by a nop | ||
704 | */ | ||
705 | txaddr = ether1_txalloc (dev, TX_SIZE); | ||
706 | tbdaddr = ether1_txalloc (dev, TBD_SIZE); | ||
707 | dataddr = ether1_txalloc (dev, skb->len); | ||
708 | nopaddr = ether1_txalloc (dev, NOP_SIZE); | ||
709 | |||
710 | tx.tx_status = 0; | ||
711 | tx.tx_command = CMD_TX | CMD_INTR; | ||
712 | tx.tx_link = nopaddr; | ||
713 | tx.tx_tbdoffset = tbdaddr; | ||
714 | tbd.tbd_opts = TBD_EOL | skb->len; | ||
715 | tbd.tbd_link = I82586_NULL; | ||
716 | tbd.tbd_bufl = dataddr; | ||
717 | tbd.tbd_bufh = 0; | ||
718 | nop.nop_status = 0; | ||
719 | nop.nop_command = CMD_NOP; | ||
720 | nop.nop_link = nopaddr; | ||
721 | |||
722 | local_irq_save(flags); | ||
723 | ether1_writebuffer (dev, &tx, txaddr, TX_SIZE); | ||
724 | ether1_writebuffer (dev, &tbd, tbdaddr, TBD_SIZE); | ||
725 | ether1_writebuffer (dev, skb->data, dataddr, skb->len); | ||
726 | ether1_writebuffer (dev, &nop, nopaddr, NOP_SIZE); | ||
727 | tmp = priv(dev)->tx_link; | ||
728 | priv(dev)->tx_link = nopaddr; | ||
729 | |||
730 | /* now reset the previous nop pointer */ | ||
731 | ether1_writew(dev, txaddr, tmp, nop_t, nop_link, NORMALIRQS); | ||
732 | |||
733 | local_irq_restore(flags); | ||
734 | |||
735 | /* handle transmit */ | ||
736 | |||
737 | /* check to see if we have room for a full sized ether frame */ | ||
738 | tmp = priv(dev)->tx_head; | ||
739 | tst = ether1_txalloc (dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN); | ||
740 | priv(dev)->tx_head = tmp; | ||
741 | dev_kfree_skb (skb); | ||
742 | |||
743 | if (tst == -1) | ||
744 | netif_stop_queue(dev); | ||
745 | |||
746 | out: | ||
747 | return NETDEV_TX_OK; | ||
748 | } | ||
749 | |||
750 | static void | ||
751 | ether1_xmit_done (struct net_device *dev) | ||
752 | { | ||
753 | nop_t nop; | ||
754 | int caddr, tst; | ||
755 | |||
756 | caddr = priv(dev)->tx_tail; | ||
757 | |||
758 | again: | ||
759 | ether1_readbuffer (dev, &nop, caddr, NOP_SIZE); | ||
760 | |||
761 | switch (nop.nop_command & CMD_MASK) { | ||
762 | case CMD_TDR: | ||
763 | /* special case */ | ||
764 | if (ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS) | ||
765 | != (unsigned short)I82586_NULL) { | ||
766 | ether1_writew(dev, SCB_CMDCUCSTART | SCB_CMDRXSTART, SCB_ADDR, scb_t, | ||
767 | scb_command, NORMALIRQS); | ||
768 | writeb(CTRL_CA, REG_CONTROL); | ||
769 | } | ||
770 | priv(dev)->tx_tail = NOP_ADDR; | ||
771 | return; | ||
772 | |||
773 | case CMD_NOP: | ||
774 | if (nop.nop_link == caddr) { | ||
775 | if (priv(dev)->initialising == 0) | ||
776 | printk (KERN_WARNING "%s: strange command complete with no tx command!\n", dev->name); | ||
777 | else | ||
778 | priv(dev)->initialising = 0; | ||
779 | return; | ||
780 | } | ||
781 | if (caddr == nop.nop_link) | ||
782 | return; | ||
783 | caddr = nop.nop_link; | ||
784 | goto again; | ||
785 | |||
786 | case CMD_TX: | ||
787 | if (nop.nop_status & STAT_COMPLETE) | ||
788 | break; | ||
789 | printk (KERN_ERR "%s: strange command complete without completed command\n", dev->name); | ||
790 | priv(dev)->restart = 1; | ||
791 | return; | ||
792 | |||
793 | default: | ||
794 | printk (KERN_WARNING "%s: strange command %d complete! (offset %04X)", dev->name, | ||
795 | nop.nop_command & CMD_MASK, caddr); | ||
796 | priv(dev)->restart = 1; | ||
797 | return; | ||
798 | } | ||
799 | |||
800 | while (nop.nop_status & STAT_COMPLETE) { | ||
801 | if (nop.nop_status & STAT_OK) { | ||
802 | dev->stats.tx_packets++; | ||
803 | dev->stats.collisions += (nop.nop_status & STAT_COLLISIONS); | ||
804 | } else { | ||
805 | dev->stats.tx_errors++; | ||
806 | |||
807 | if (nop.nop_status & STAT_COLLAFTERTX) | ||
808 | dev->stats.collisions++; | ||
809 | if (nop.nop_status & STAT_NOCARRIER) | ||
810 | dev->stats.tx_carrier_errors++; | ||
811 | if (nop.nop_status & STAT_TXLOSTCTS) | ||
812 | printk (KERN_WARNING "%s: cts lost\n", dev->name); | ||
813 | if (nop.nop_status & STAT_TXSLOWDMA) | ||
814 | dev->stats.tx_fifo_errors++; | ||
815 | if (nop.nop_status & STAT_COLLEXCESSIVE) | ||
816 | dev->stats.collisions += 16; | ||
817 | } | ||
818 | |||
819 | if (nop.nop_link == caddr) { | ||
820 | printk (KERN_ERR "%s: tx buffer chaining error: tx command points to itself\n", dev->name); | ||
821 | break; | ||
822 | } | ||
823 | |||
824 | caddr = nop.nop_link; | ||
825 | ether1_readbuffer (dev, &nop, caddr, NOP_SIZE); | ||
826 | if ((nop.nop_command & CMD_MASK) != CMD_NOP) { | ||
827 | printk (KERN_ERR "%s: tx buffer chaining error: no nop after tx command\n", dev->name); | ||
828 | break; | ||
829 | } | ||
830 | |||
831 | if (caddr == nop.nop_link) | ||
832 | break; | ||
833 | |||
834 | caddr = nop.nop_link; | ||
835 | ether1_readbuffer (dev, &nop, caddr, NOP_SIZE); | ||
836 | if ((nop.nop_command & CMD_MASK) != CMD_TX) { | ||
837 | printk (KERN_ERR "%s: tx buffer chaining error: no tx command after nop\n", dev->name); | ||
838 | break; | ||
839 | } | ||
840 | } | ||
841 | priv(dev)->tx_tail = caddr; | ||
842 | |||
843 | caddr = priv(dev)->tx_head; | ||
844 | tst = ether1_txalloc (dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN); | ||
845 | priv(dev)->tx_head = caddr; | ||
846 | if (tst != -1) | ||
847 | netif_wake_queue(dev); | ||
848 | } | ||
849 | |||
850 | static void | ||
851 | ether1_recv_done (struct net_device *dev) | ||
852 | { | ||
853 | int status; | ||
854 | int nexttail, rbdaddr; | ||
855 | rbd_t rbd; | ||
856 | |||
857 | do { | ||
858 | status = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_status, NORMALIRQS); | ||
859 | if ((status & RFD_COMPLETE) == 0) | ||
860 | break; | ||
861 | |||
862 | rbdaddr = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_rbdoffset, NORMALIRQS); | ||
863 | ether1_readbuffer (dev, &rbd, rbdaddr, RBD_SIZE); | ||
864 | |||
865 | if ((rbd.rbd_status & (RBD_EOF | RBD_ACNTVALID)) == (RBD_EOF | RBD_ACNTVALID)) { | ||
866 | int length = rbd.rbd_status & RBD_ACNT; | ||
867 | struct sk_buff *skb; | ||
868 | |||
869 | length = (length + 1) & ~1; | ||
870 | skb = dev_alloc_skb (length + 2); | ||
871 | |||
872 | if (skb) { | ||
873 | skb_reserve (skb, 2); | ||
874 | |||
875 | ether1_readbuffer (dev, skb_put (skb, length), rbd.rbd_bufl, length); | ||
876 | |||
877 | skb->protocol = eth_type_trans (skb, dev); | ||
878 | netif_rx (skb); | ||
879 | dev->stats.rx_packets++; | ||
880 | } else | ||
881 | dev->stats.rx_dropped++; | ||
882 | } else { | ||
883 | printk(KERN_WARNING "%s: %s\n", dev->name, | ||
884 | (rbd.rbd_status & RBD_EOF) ? "oversized packet" : "acnt not valid"); | ||
885 | dev->stats.rx_dropped++; | ||
886 | } | ||
887 | |||
888 | nexttail = ether1_readw(dev, priv(dev)->rx_tail, rfd_t, rfd_link, NORMALIRQS); | ||
889 | /* nexttail should be rx_head */ | ||
890 | if (nexttail != priv(dev)->rx_head) | ||
891 | printk(KERN_ERR "%s: receiver buffer chaining error (%04X != %04X)\n", | ||
892 | dev->name, nexttail, priv(dev)->rx_head); | ||
893 | ether1_writew(dev, RFD_CMDEL | RFD_CMDSUSPEND, nexttail, rfd_t, rfd_command, NORMALIRQS); | ||
894 | ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_command, NORMALIRQS); | ||
895 | ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_status, NORMALIRQS); | ||
896 | ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_rbdoffset, NORMALIRQS); | ||
897 | |||
898 | priv(dev)->rx_tail = nexttail; | ||
899 | priv(dev)->rx_head = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_link, NORMALIRQS); | ||
900 | } while (1); | ||
901 | } | ||
902 | |||
903 | static irqreturn_t | ||
904 | ether1_interrupt (int irq, void *dev_id) | ||
905 | { | ||
906 | struct net_device *dev = (struct net_device *)dev_id; | ||
907 | int status; | ||
908 | |||
909 | status = ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS); | ||
910 | |||
911 | if (status) { | ||
912 | ether1_writew(dev, status & (SCB_STRNR | SCB_STCNA | SCB_STFR | SCB_STCX), | ||
913 | SCB_ADDR, scb_t, scb_command, NORMALIRQS); | ||
914 | writeb(CTRL_CA | CTRL_ACK, REG_CONTROL); | ||
915 | if (status & SCB_STCX) { | ||
916 | ether1_xmit_done (dev); | ||
917 | } | ||
918 | if (status & SCB_STCNA) { | ||
919 | if (priv(dev)->resetting == 0) | ||
920 | printk (KERN_WARNING "%s: CU went not ready ???\n", dev->name); | ||
921 | else | ||
922 | priv(dev)->resetting += 1; | ||
923 | if (ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS) | ||
924 | != (unsigned short)I82586_NULL) { | ||
925 | ether1_writew(dev, SCB_CMDCUCSTART, SCB_ADDR, scb_t, scb_command, NORMALIRQS); | ||
926 | writeb(CTRL_CA, REG_CONTROL); | ||
927 | } | ||
928 | if (priv(dev)->resetting == 2) | ||
929 | priv(dev)->resetting = 0; | ||
930 | } | ||
931 | if (status & SCB_STFR) { | ||
932 | ether1_recv_done (dev); | ||
933 | } | ||
934 | if (status & SCB_STRNR) { | ||
935 | if (ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS) & SCB_STRXSUSP) { | ||
936 | printk (KERN_WARNING "%s: RU went not ready: RU suspended\n", dev->name); | ||
937 | ether1_writew(dev, SCB_CMDRXRESUME, SCB_ADDR, scb_t, scb_command, NORMALIRQS); | ||
938 | writeb(CTRL_CA, REG_CONTROL); | ||
939 | dev->stats.rx_dropped++; /* we suspended due to lack of buffer space */ | ||
940 | } else | ||
941 | printk(KERN_WARNING "%s: RU went not ready: %04X\n", dev->name, | ||
942 | ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS)); | ||
943 | printk (KERN_WARNING "RU ptr = %04X\n", ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, | ||
944 | NORMALIRQS)); | ||
945 | } | ||
946 | } else | ||
947 | writeb(CTRL_ACK, REG_CONTROL); | ||
948 | |||
949 | return IRQ_HANDLED; | ||
950 | } | ||
951 | |||
952 | static int | ||
953 | ether1_close (struct net_device *dev) | ||
954 | { | ||
955 | ether1_reset (dev); | ||
956 | |||
957 | free_irq(dev->irq, dev); | ||
958 | |||
959 | return 0; | ||
960 | } | ||
961 | |||
962 | /* | ||
963 | * Set or clear the multicast filter for this adaptor. | ||
964 | * num_addrs == -1 Promiscuous mode, receive all packets. | ||
965 | * num_addrs == 0 Normal mode, clear multicast list. | ||
966 | * num_addrs > 0 Multicast mode, receive normal and MC packets, and do | ||
967 | * best-effort filtering. | ||
968 | */ | ||
969 | static void | ||
970 | ether1_setmulticastlist (struct net_device *dev) | ||
971 | { | ||
972 | } | ||
973 | |||
974 | /* ------------------------------------------------------------------------- */ | ||
975 | |||
976 | static void __devinit ether1_banner(void) | ||
977 | { | ||
978 | static unsigned int version_printed = 0; | ||
979 | |||
980 | if (net_debug && version_printed++ == 0) | ||
981 | printk(KERN_INFO "%s", version); | ||
982 | } | ||
983 | |||
984 | static const struct net_device_ops ether1_netdev_ops = { | ||
985 | .ndo_open = ether1_open, | ||
986 | .ndo_stop = ether1_close, | ||
987 | .ndo_start_xmit = ether1_sendpacket, | ||
988 | .ndo_set_multicast_list = ether1_setmulticastlist, | ||
989 | .ndo_tx_timeout = ether1_timeout, | ||
990 | .ndo_validate_addr = eth_validate_addr, | ||
991 | .ndo_change_mtu = eth_change_mtu, | ||
992 | .ndo_set_mac_address = eth_mac_addr, | ||
993 | }; | ||
994 | |||
995 | static int __devinit | ||
996 | ether1_probe(struct expansion_card *ec, const struct ecard_id *id) | ||
997 | { | ||
998 | struct net_device *dev; | ||
999 | int i, ret = 0; | ||
1000 | |||
1001 | ether1_banner(); | ||
1002 | |||
1003 | ret = ecard_request_resources(ec); | ||
1004 | if (ret) | ||
1005 | goto out; | ||
1006 | |||
1007 | dev = alloc_etherdev(sizeof(struct ether1_priv)); | ||
1008 | if (!dev) { | ||
1009 | ret = -ENOMEM; | ||
1010 | goto release; | ||
1011 | } | ||
1012 | |||
1013 | SET_NETDEV_DEV(dev, &ec->dev); | ||
1014 | |||
1015 | dev->irq = ec->irq; | ||
1016 | priv(dev)->base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); | ||
1017 | if (!priv(dev)->base) { | ||
1018 | ret = -ENOMEM; | ||
1019 | goto free; | ||
1020 | } | ||
1021 | |||
1022 | if ((priv(dev)->bus_type = ether1_reset(dev)) == 0) { | ||
1023 | ret = -ENODEV; | ||
1024 | goto free; | ||
1025 | } | ||
1026 | |||
1027 | for (i = 0; i < 6; i++) | ||
1028 | dev->dev_addr[i] = readb(IDPROM_ADDRESS + (i << 2)); | ||
1029 | |||
1030 | if (ether1_init_2(dev)) { | ||
1031 | ret = -ENODEV; | ||
1032 | goto free; | ||
1033 | } | ||
1034 | |||
1035 | dev->netdev_ops = ðer1_netdev_ops; | ||
1036 | dev->watchdog_timeo = 5 * HZ / 100; | ||
1037 | |||
1038 | ret = register_netdev(dev); | ||
1039 | if (ret) | ||
1040 | goto free; | ||
1041 | |||
1042 | printk(KERN_INFO "%s: ether1 in slot %d, %pM\n", | ||
1043 | dev->name, ec->slot_no, dev->dev_addr); | ||
1044 | |||
1045 | ecard_set_drvdata(ec, dev); | ||
1046 | return 0; | ||
1047 | |||
1048 | free: | ||
1049 | free_netdev(dev); | ||
1050 | release: | ||
1051 | ecard_release_resources(ec); | ||
1052 | out: | ||
1053 | return ret; | ||
1054 | } | ||
1055 | |||
1056 | static void __devexit ether1_remove(struct expansion_card *ec) | ||
1057 | { | ||
1058 | struct net_device *dev = ecard_get_drvdata(ec); | ||
1059 | |||
1060 | ecard_set_drvdata(ec, NULL); | ||
1061 | |||
1062 | unregister_netdev(dev); | ||
1063 | free_netdev(dev); | ||
1064 | ecard_release_resources(ec); | ||
1065 | } | ||
1066 | |||
1067 | static const struct ecard_id ether1_ids[] = { | ||
1068 | { MANU_ACORN, PROD_ACORN_ETHER1 }, | ||
1069 | { 0xffff, 0xffff } | ||
1070 | }; | ||
1071 | |||
1072 | static struct ecard_driver ether1_driver = { | ||
1073 | .probe = ether1_probe, | ||
1074 | .remove = __devexit_p(ether1_remove), | ||
1075 | .id_table = ether1_ids, | ||
1076 | .drv = { | ||
1077 | .name = "ether1", | ||
1078 | }, | ||
1079 | }; | ||
1080 | |||
1081 | static int __init ether1_init(void) | ||
1082 | { | ||
1083 | return ecard_register_driver(ðer1_driver); | ||
1084 | } | ||
1085 | |||
1086 | static void __exit ether1_exit(void) | ||
1087 | { | ||
1088 | ecard_remove_driver(ðer1_driver); | ||
1089 | } | ||
1090 | |||
1091 | module_init(ether1_init); | ||
1092 | module_exit(ether1_exit); | ||
1093 | |||
1094 | MODULE_LICENSE("GPL"); | ||