10 files changed, 13 insertions, 13 deletions

diff --git a/drivers/media/video/gspca/gl860/gl860-mi1320.c b/drivers/media/video/gspca/gl860/gl860-mi1320.c
index c276a7debde..b57160e0486 100644
--- a/drivers/media/video/gspca/gl860/gl860-mi1320.c
+++ b/drivers/media/video/gspca/gl860/gl860-mi1320.c
@@ -201,7 +201,7 @@ void mi1320_init_settings(struct gspca_dev *gspca_dev)
         sd->vmax.backlight  =  2;
         sd->vmax.brightness =  8;
         sd->vmax.sharpness  =  7;
-        sd->vmax.contrast   =  0; /* 10 but not working with tihs driver */
+        sd->vmax.contrast   =  0; /* 10 but not working with this driver */
         sd->vmax.gamma      = 40;
         sd->vmax.hue        =  5 + 1;
         sd->vmax.saturation =  8;
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 9c6a643caf0..e526aa3deda 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -857,7 +857,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
                 }
 
                 /* the bandwidth is not wide enough
-                 * negociate or try a lower alternate setting */
+                 * negotiate or try a lower alternate setting */
                 PDEBUG(D_ERR|D_STREAM,
                         "bandwidth not wide enough - trying again");
                 msleep(20);     /* wait for kill complete */
@@ -2346,7 +2346,7 @@ void gspca_disconnect(struct usb_interface *intf)
         usb_set_intfdata(intf, NULL);
 
         /* release the device */
-        /* (this will call gspca_release() immediatly or on last close) */
+        /* (this will call gspca_release() immediately or on last close) */
         video_unregister_device(&gspca_dev->vdev);
 
 /*      PDEBUG(D_PROBE, "disconnect complete"); */
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index cb4d0bf0d78..0196209a948 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -361,7 +361,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
                 mi_w(gspca_dev, i + 1, mi_data[i]);
 
         data[0] = 0x00;
-        data[1] = 0x4d;         /* ISOC transfering enable... */
+        data[1] = 0x4d;         /* ISOC transferring enable... */
         reg_w(gspca_dev, 2);
 
         gspca_dev->ctrl_inac = 0; /* activate the illuminator controls */
diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c
index 3884c9d300c..97e50796743 100644
--- a/drivers/media/video/gspca/mr97310a.c
+++ b/drivers/media/video/gspca/mr97310a.c
@@ -469,7 +469,7 @@ static void lcd_stop(struct gspca_dev *gspca_dev)
 static int isoc_enable(struct gspca_dev *gspca_dev)
 {
         gspca_dev->usb_buf[0] = 0x00;
-        gspca_dev->usb_buf[1] = 0x4d;  /* ISOC transfering enable... */
+        gspca_dev->usb_buf[1] = 0x4d;  /* ISOC transferring enable... */
         return mr_write(gspca_dev, 2);
 }
 
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index fd1b6082c96..36a46fc7873 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -381,7 +381,7 @@ static const struct v4l2_pix_format ov519_sif_mode[] = {
    larger then necessary, however they need to be this big as the ov511 /
    ov518 always fills the entire isoc frame, using 0 padding bytes when
    it doesn't have any data. So with low framerates the amount of data
-   transfered can become quite large (libv4l will remove all the 0 padding
+   transferred can become quite large (libv4l will remove all the 0 padding
    in userspace). */
 static const struct v4l2_pix_format ov518_vga_mode[] = {
         {320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
@@ -4368,7 +4368,7 @@ static void ov511_pkt_scan(struct gspca_dev *gspca_dev,
                                 gspca_dev->last_packet_type = DISCARD_PACKET;
                                 return;
                         }
-                        /* Add 11 byte footer to frame, might be usefull */
+                        /* Add 11 byte footer to frame, might be useful */
                         gspca_frame_add(gspca_dev, LAST_PACKET, in, 11);
                         return;
                 } else {
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 5a08738fba3..146b459b08d 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -827,7 +827,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
                    possible to use less exposure then what the fps maximum
                    allows by setting register 10. register 10 configures the
                    actual exposure as quotient of the full exposure, with 0
-                   being no exposure at all (not very usefull) and reg10_max
+                   being no exposure at all (not very useful) and reg10_max
                    being max exposure possible at that framerate.
 
                    The code maps our 0 - 510 ms exposure ctrl to these 2
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 45552c3ff8d..3e76951e3c1 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -607,7 +607,7 @@ static void spca500_reinit(struct gspca_dev *gspca_dev)
         reg_w(gspca_dev, 0x00, 0x8880, 2);
         /* family cam Quicksmart stuff */
         reg_w(gspca_dev, 0x00, 0x800a, 0x00);
-        /* Set agc transfer: synced inbetween frames */
+        /* Set agc transfer: synced between frames */
         reg_w(gspca_dev, 0x00, 0x820f, 0x01);
         /* Init SDRAM - needed for SDRAM access */
         reg_w(gspca_dev, 0x00, 0x870a, 0x04);
@@ -831,7 +831,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
                 /* familycam Quicksmart pocketDV stuff */
                 reg_w(gspca_dev, 0x00, 0x800a, 0x00);
-                /* Set agc transfer: synced inbetween frames */
+                /* Set agc transfer: synced between frames */
                 reg_w(gspca_dev, 0x00, 0x820f, 0x01);
                 /* Init SDRAM - needed for SDRAM access */
                 reg_w(gspca_dev, 0x00, 0x870a, 0x04);
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index 34831937152..41dce49fb43 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -592,7 +592,7 @@ static const u16 spca508_sightcam_init_data[][2] = {
 /* This line seems to setup the frame/canvas */
         {0x000f, 0x8402},
 
-/* Theese 6 lines are needed to startup the webcam */
+/* These 6 lines are needed to startup the webcam */
         {0x0090, 0x8110},
         {0x0001, 0x8114},
         {0x0001, 0x8114},
diff --git a/drivers/media/video/gspca/sq905.c b/drivers/media/video/gspca/sq905.c
index 2e9c0617519..5ba96aff225 100644
--- a/drivers/media/video/gspca/sq905.c
+++ b/drivers/media/video/gspca/sq905.c
@@ -22,7 +22,7 @@
  * History and Acknowledgments
  *
  * The original Linux driver for SQ905 based cameras was written by
- * Marcell Lengyel and furter developed by many other contributers
+ * Marcell Lengyel and furter developed by many other contributors
  * and is available from http://sourceforge.net/projects/sqcam/
  *
  * This driver takes advantage of the reverse engineering work done for
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index 17531b41a07..b8156855f2b 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -569,7 +569,7 @@ static int hdcs_init(struct sd *sd)
         if (err < 0)
                 return err;
 
-        /* Enable continous frame capture, bit 2: stop when frame complete */
+        /* Enable continuous frame capture, bit 2: stop when frame complete */
         err = stv06xx_write_sensor(sd, HDCS_REG_CONFIG(sd), BIT(3));
         if (err < 0)
                 return err;