aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/video/bt8xx/bttv-cards.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/bt8xx/bttv-cards.c')
-rw-r--r--drivers/media/video/bt8xx/bttv-cards.c4916
1 files changed, 4916 insertions, 0 deletions
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
new file mode 100644
index 00000000000..5b15f63bf06
--- /dev/null
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -0,0 +1,4916 @@
1/*
2
3 bttv-cards.c
4
5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
7
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
11
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
16
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
21
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25
26*/
27
28#include <linux/delay.h>
29#include <linux/module.h>
30#include <linux/kmod.h>
31#include <linux/init.h>
32#include <linux/pci.h>
33#include <linux/vmalloc.h>
34#include <linux/firmware.h>
35#include <net/checksum.h>
36
37#include <asm/unaligned.h>
38#include <asm/io.h>
39
40#include "bttvp.h"
41#include <media/v4l2-common.h>
42#include <media/tvaudio.h>
43#include "bttv-audio-hook.h"
44
45/* fwd decl */
46static void boot_msp34xx(struct bttv *btv, int pin);
47static void hauppauge_eeprom(struct bttv *btv);
48static void avermedia_eeprom(struct bttv *btv);
49static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
50static void modtec_eeprom(struct bttv *btv);
51static void init_PXC200(struct bttv *btv);
52static void init_RTV24(struct bttv *btv);
53
54static void rv605_muxsel(struct bttv *btv, unsigned int input);
55static void eagle_muxsel(struct bttv *btv, unsigned int input);
56static void xguard_muxsel(struct bttv *btv, unsigned int input);
57static void ivc120_muxsel(struct bttv *btv, unsigned int input);
58static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
59
60static void PXC200_muxsel(struct bttv *btv, unsigned int input);
61
62static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
63static void picolo_tetra_init(struct bttv *btv);
64
65static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
66static void tibetCS16_init(struct bttv *btv);
67
68static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
69static void kodicom4400r_init(struct bttv *btv);
70
71static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
72static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
73
74static void geovision_muxsel(struct bttv *btv, unsigned int input);
75
76static void phytec_muxsel(struct bttv *btv, unsigned int input);
77
78static void gv800s_muxsel(struct bttv *btv, unsigned int input);
79static void gv800s_init(struct bttv *btv);
80
81static int terratec_active_radio_upgrade(struct bttv *btv);
82static int tea5757_read(struct bttv *btv);
83static int tea5757_write(struct bttv *btv, int value);
84static void identify_by_eeprom(struct bttv *btv,
85 unsigned char eeprom_data[256]);
86static int __devinit pvr_boot(struct bttv *btv);
87
88/* config variables */
89static unsigned int triton1;
90static unsigned int vsfx;
91static unsigned int latency = UNSET;
92int no_overlay=-1;
93
94static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
95static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
96static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
97static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
98static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
99static unsigned int audiodev[BTTV_MAX];
100static unsigned int saa6588[BTTV_MAX];
101static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
102static unsigned int autoload = UNSET;
103static unsigned int gpiomask = UNSET;
104static unsigned int audioall = UNSET;
105static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
106
107/* insmod options */
108module_param(triton1, int, 0444);
109module_param(vsfx, int, 0444);
110module_param(no_overlay, int, 0444);
111module_param(latency, int, 0444);
112module_param(gpiomask, int, 0444);
113module_param(audioall, int, 0444);
114module_param(autoload, int, 0444);
115
116module_param_array(card, int, NULL, 0444);
117module_param_array(pll, int, NULL, 0444);
118module_param_array(tuner, int, NULL, 0444);
119module_param_array(svhs, int, NULL, 0444);
120module_param_array(remote, int, NULL, 0444);
121module_param_array(audiodev, int, NULL, 0444);
122module_param_array(audiomux, int, NULL, 0444);
123
124MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
125 "[enable bug compatibility for triton1 + others]");
126MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
127 "[yet another chipset flaw workaround]");
128MODULE_PARM_DESC(latency,"pci latency timer");
129MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
130MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
131MODULE_PARM_DESC(tuner,"specify installed tuner type");
132MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
133MODULE_PARM_DESC(audiodev, "specify audio device:\n"
134 "\t\t-1 = no audio\n"
135 "\t\t 0 = autodetect (default)\n"
136 "\t\t 1 = msp3400\n"
137 "\t\t 2 = tda7432\n"
138 "\t\t 3 = tvaudio");
139MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
140MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
141 " [some VIA/SIS chipsets are known to have problem with overlay]");
142
143/* ----------------------------------------------------------------------- */
144/* list of card IDs for bt878+ cards */
145
146static struct CARD {
147 unsigned id;
148 int cardnr;
149 char *name;
150} cards[] __devinitdata = {
151 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
152 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
153 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
154 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
155 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
156 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
157 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
158 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
159 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
160
161 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
162 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
163
164 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
165 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
166 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
167 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
168 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
169 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
170 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
171 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
172 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
173
174 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
175 /* some cards ship with byteswapped IDs ... */
176 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
177 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
178 /* this seems to happen as well ... */
179 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
180
181 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
182 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
183 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
184
185 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
186 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
187 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
188 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
189 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
190 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
191 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
192
193 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
194 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
195 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
196 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
197 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
198
199 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
200 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
201 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
202 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
203
204 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
205 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
206 /* clashes with FlyVideo
207 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
208 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
209 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
210 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
211 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
212
213 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
214 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
215 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
216 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
217 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
218
219 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
220 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
221 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
222 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
223 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
224
225 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
226 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
227 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
228 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
229
230 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
231 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
232 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
233 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
234
235 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
236 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
237 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
238 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
239 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
240 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
241 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
242 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
243 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
244 { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" },
245 { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" },
246 { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" },
247 { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" },
248 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
249 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
250 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
251 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
252 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
255 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
256 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
257 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
258 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
259 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
260 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
261 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
262 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
263 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
264 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
265 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
266 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
267 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
268
269 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
270 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
271
272 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
273 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
274 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
275 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
276 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
277 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
278
279 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
280 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
281
282 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
283 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
284 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
285 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
286 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
287 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
288 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
289 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
290 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
291
292 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
293 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
294
295 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
296 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
297 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
298 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
299
300 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
301
302 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
303 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
304
305 /* likely broken, vendor id doesn't match the other magic views ...
306 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
307
308 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
309 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
310
311 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
312
313 /* DVB cards (using pci function .1 for mpeg data xfer) */
314 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
315 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
316 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
317 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
318 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
319 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
320 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
321 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
322 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
323 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
324 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
325 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
326 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
327 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
328 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
329 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
330 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
331 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
332 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
333
334 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
335 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
336 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
337 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
338 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
339 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
340 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
341 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
342
343 { 0, -1, NULL }
344};
345
346/* ----------------------------------------------------------------------- */
347/* array with description for bt848 / bt878 tv/grabber cards */
348
349struct tvcard bttv_tvcards[] = {
350 /* ---- card 0x00 ---------------------------------- */
351 [BTTV_BOARD_UNKNOWN] = {
352 .name = " *** UNKNOWN/GENERIC *** ",
353 .video_inputs = 4,
354 .svhs = 2,
355 .muxsel = MUXSEL(2, 3, 1, 0),
356 .tuner_type = UNSET,
357 .tuner_addr = ADDR_UNSET,
358 },
359 [BTTV_BOARD_MIRO] = {
360 .name = "MIRO PCTV",
361 .video_inputs = 4,
362 /* .audio_inputs= 1, */
363 .svhs = 2,
364 .gpiomask = 15,
365 .muxsel = MUXSEL(2, 3, 1, 1),
366 .gpiomux = { 2, 0, 0, 0 },
367 .gpiomute = 10,
368 .needs_tvaudio = 1,
369 .tuner_type = UNSET,
370 .tuner_addr = ADDR_UNSET,
371 },
372 [BTTV_BOARD_HAUPPAUGE] = {
373 .name = "Hauppauge (bt848)",
374 .video_inputs = 4,
375 /* .audio_inputs= 1, */
376 .svhs = 2,
377 .gpiomask = 7,
378 .muxsel = MUXSEL(2, 3, 1, 1),
379 .gpiomux = { 0, 1, 2, 3 },
380 .gpiomute = 4,
381 .needs_tvaudio = 1,
382 .tuner_type = UNSET,
383 .tuner_addr = ADDR_UNSET,
384 },
385 [BTTV_BOARD_STB] = {
386 .name = "STB, Gateway P/N 6000699 (bt848)",
387 .video_inputs = 3,
388 /* .audio_inputs= 1, */
389 .svhs = 2,
390 .gpiomask = 7,
391 .muxsel = MUXSEL(2, 3, 1, 1),
392 .gpiomux = { 4, 0, 2, 3 },
393 .gpiomute = 1,
394 .no_msp34xx = 1,
395 .needs_tvaudio = 1,
396 .tuner_type = TUNER_PHILIPS_NTSC,
397 .tuner_addr = ADDR_UNSET,
398 .pll = PLL_28,
399 .has_radio = 1,
400 },
401
402 /* ---- card 0x04 ---------------------------------- */
403 [BTTV_BOARD_INTEL] = {
404 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
405 .video_inputs = 4,
406 /* .audio_inputs= 0, */
407 .svhs = 2,
408 .gpiomask = 0,
409 .muxsel = MUXSEL(2, 3, 1, 1),
410 .gpiomux = { 0 },
411 .needs_tvaudio = 0,
412 .tuner_type = TUNER_ABSENT,
413 .tuner_addr = ADDR_UNSET,
414 },
415 [BTTV_BOARD_DIAMOND] = {
416 .name = "Diamond DTV2000",
417 .video_inputs = 4,
418 /* .audio_inputs= 1, */
419 .svhs = 2,
420 .gpiomask = 3,
421 .muxsel = MUXSEL(2, 3, 1, 0),
422 .gpiomux = { 0, 1, 0, 1 },
423 .gpiomute = 3,
424 .needs_tvaudio = 1,
425 .tuner_type = UNSET,
426 .tuner_addr = ADDR_UNSET,
427 },
428 [BTTV_BOARD_AVERMEDIA] = {
429 .name = "AVerMedia TVPhone",
430 .video_inputs = 3,
431 /* .audio_inputs= 1, */
432 .svhs = 3,
433 .muxsel = MUXSEL(2, 3, 1, 1),
434 .gpiomask = 0x0f,
435 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
436 /* 0x04 for some cards ?? */
437 .needs_tvaudio = 1,
438 .tuner_type = UNSET,
439 .tuner_addr = ADDR_UNSET,
440 .audio_mode_gpio= avermedia_tvphone_audio,
441 .has_remote = 1,
442 },
443 [BTTV_BOARD_MATRIX_VISION] = {
444 .name = "MATRIX-Vision MV-Delta",
445 .video_inputs = 5,
446 /* .audio_inputs= 1, */
447 .svhs = 3,
448 .gpiomask = 0,
449 .muxsel = MUXSEL(2, 3, 1, 0, 0),
450 .gpiomux = { 0 },
451 .needs_tvaudio = 1,
452 .tuner_type = TUNER_ABSENT,
453 .tuner_addr = ADDR_UNSET,
454 },
455
456 /* ---- card 0x08 ---------------------------------- */
457 [BTTV_BOARD_FLYVIDEO] = {
458 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
459 .video_inputs = 4,
460 /* .audio_inputs= 1, */
461 .svhs = 2,
462 .gpiomask = 0xc00,
463 .muxsel = MUXSEL(2, 3, 1, 1),
464 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
465 .gpiomute = 0xc00,
466 .needs_tvaudio = 1,
467 .pll = PLL_28,
468 .tuner_type = UNSET,
469 .tuner_addr = ADDR_UNSET,
470 },
471 [BTTV_BOARD_TURBOTV] = {
472 .name = "IMS/IXmicro TurboTV",
473 .video_inputs = 3,
474 /* .audio_inputs= 1, */
475 .svhs = 2,
476 .gpiomask = 3,
477 .muxsel = MUXSEL(2, 3, 1, 1),
478 .gpiomux = { 1, 1, 2, 3 },
479 .needs_tvaudio = 0,
480 .pll = PLL_28,
481 .tuner_type = TUNER_TEMIC_PAL,
482 .tuner_addr = ADDR_UNSET,
483 },
484 [BTTV_BOARD_HAUPPAUGE878] = {
485 .name = "Hauppauge (bt878)",
486 .video_inputs = 4,
487 /* .audio_inputs= 1, */
488 .svhs = 2,
489 .gpiomask = 0x0f, /* old: 7 */
490 .muxsel = MUXSEL(2, 0, 1, 1),
491 .gpiomux = { 0, 1, 2, 3 },
492 .gpiomute = 4,
493 .needs_tvaudio = 1,
494 .pll = PLL_28,
495 .tuner_type = UNSET,
496 .tuner_addr = ADDR_UNSET,
497 },
498 [BTTV_BOARD_MIROPRO] = {
499 .name = "MIRO PCTV pro",
500 .video_inputs = 3,
501 /* .audio_inputs= 1, */
502 .svhs = 2,
503 .gpiomask = 0x3014f,
504 .muxsel = MUXSEL(2, 3, 1, 1),
505 .gpiomux = { 0x20001,0x10001, 0, 0 },
506 .gpiomute = 10,
507 .needs_tvaudio = 1,
508 .tuner_type = UNSET,
509 .tuner_addr = ADDR_UNSET,
510 },
511
512 /* ---- card 0x0c ---------------------------------- */
513 [BTTV_BOARD_ADSTECH_TV] = {
514 .name = "ADS Technologies Channel Surfer TV (bt848)",
515 .video_inputs = 3,
516 /* .audio_inputs= 1, */
517 .svhs = 2,
518 .gpiomask = 15,
519 .muxsel = MUXSEL(2, 3, 1, 1),
520 .gpiomux = { 13, 14, 11, 7 },
521 .needs_tvaudio = 1,
522 .tuner_type = UNSET,
523 .tuner_addr = ADDR_UNSET,
524 },
525 [BTTV_BOARD_AVERMEDIA98] = {
526 .name = "AVerMedia TVCapture 98",
527 .video_inputs = 3,
528 /* .audio_inputs= 4, */
529 .svhs = 2,
530 .gpiomask = 15,
531 .muxsel = MUXSEL(2, 3, 1, 1),
532 .gpiomux = { 13, 14, 11, 7 },
533 .needs_tvaudio = 1,
534 .msp34xx_alt = 1,
535 .pll = PLL_28,
536 .tuner_type = TUNER_PHILIPS_PAL,
537 .tuner_addr = ADDR_UNSET,
538 .audio_mode_gpio= avermedia_tv_stereo_audio,
539 .no_gpioirq = 1,
540 },
541 [BTTV_BOARD_VHX] = {
542 .name = "Aimslab Video Highway Xtreme (VHX)",
543 .video_inputs = 3,
544 /* .audio_inputs= 1, */
545 .svhs = 2,
546 .gpiomask = 7,
547 .muxsel = MUXSEL(2, 3, 1, 1),
548 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
549 .gpiomute = 4,
550 .needs_tvaudio = 1,
551 .pll = PLL_28,
552 .tuner_type = UNSET,
553 .tuner_addr = ADDR_UNSET,
554 },
555 [BTTV_BOARD_ZOLTRIX] = {
556 .name = "Zoltrix TV-Max",
557 .video_inputs = 3,
558 /* .audio_inputs= 1, */
559 .svhs = 2,
560 .gpiomask = 15,
561 .muxsel = MUXSEL(2, 3, 1, 1),
562 .gpiomux = { 0, 0, 1, 0 },
563 .gpiomute = 10,
564 .needs_tvaudio = 1,
565 .tuner_type = UNSET,
566 .tuner_addr = ADDR_UNSET,
567 },
568
569 /* ---- card 0x10 ---------------------------------- */
570 [BTTV_BOARD_PIXVIEWPLAYTV] = {
571 .name = "Prolink Pixelview PlayTV (bt878)",
572 .video_inputs = 3,
573 /* .audio_inputs= 1, */
574 .svhs = 2,
575 .gpiomask = 0x01fe00,
576 .muxsel = MUXSEL(2, 3, 1, 1),
577 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
578 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
579 .gpiomute = 0x002000,
580 .needs_tvaudio = 1,
581 .pll = PLL_28,
582 .tuner_type = UNSET,
583 .tuner_addr = ADDR_UNSET,
584 },
585 [BTTV_BOARD_WINVIEW_601] = {
586 .name = "Leadtek WinView 601",
587 .video_inputs = 3,
588 /* .audio_inputs= 1, */
589 .svhs = 2,
590 .gpiomask = 0x8300f8,
591 .muxsel = MUXSEL(2, 3, 1, 1, 0),
592 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
593 .gpiomute = 0xcfa007,
594 .needs_tvaudio = 1,
595 .tuner_type = UNSET,
596 .tuner_addr = ADDR_UNSET,
597 .volume_gpio = winview_volume,
598 .has_radio = 1,
599 },
600 [BTTV_BOARD_AVEC_INTERCAP] = {
601 .name = "AVEC Intercapture",
602 .video_inputs = 3,
603 /* .audio_inputs= 2, */
604 .svhs = 2,
605 .gpiomask = 0,
606 .muxsel = MUXSEL(2, 3, 1, 1),
607 .gpiomux = { 1, 0, 0, 0 },
608 .needs_tvaudio = 1,
609 .tuner_type = UNSET,
610 .tuner_addr = ADDR_UNSET,
611 },
612 [BTTV_BOARD_LIFE_FLYKIT] = {
613 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
614 .video_inputs = 4,
615 /* .audio_inputs= 1, */
616 .svhs = NO_SVHS,
617 .gpiomask = 0x8dff00,
618 .muxsel = MUXSEL(2, 3, 1, 1),
619 .gpiomux = { 0 },
620 .no_msp34xx = 1,
621 .tuner_type = TUNER_ABSENT,
622 .tuner_addr = ADDR_UNSET,
623 },
624
625 /* ---- card 0x14 ---------------------------------- */
626 [BTTV_BOARD_CEI_RAFFLES] = {
627 .name = "CEI Raffles Card",
628 .video_inputs = 3,
629 /* .audio_inputs= 3, */
630 .svhs = 2,
631 .muxsel = MUXSEL(2, 3, 1, 1),
632 .tuner_type = UNSET,
633 .tuner_addr = ADDR_UNSET,
634 },
635 [BTTV_BOARD_CONFERENCETV] = {
636 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
637 .video_inputs = 4,
638 /* .audio_inputs= 2, tuner, line in */
639 .svhs = 2,
640 .gpiomask = 0x1800,
641 .muxsel = MUXSEL(2, 3, 1, 1),
642 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
643 .gpiomute = 0x1800,
644 .pll = PLL_28,
645 .tuner_type = TUNER_PHILIPS_PAL_I,
646 .tuner_addr = ADDR_UNSET,
647 },
648 [BTTV_BOARD_PHOEBE_TVMAS] = {
649 .name = "Askey CPH050/ Phoebe Tv Master + FM",
650 .video_inputs = 3,
651 /* .audio_inputs= 1, */
652 .svhs = 2,
653 .gpiomask = 0xc00,
654 .muxsel = MUXSEL(2, 3, 1, 1),
655 .gpiomux = { 0, 1, 0x800, 0x400 },
656 .gpiomute = 0xc00,
657 .needs_tvaudio = 1,
658 .pll = PLL_28,
659 .tuner_type = UNSET,
660 .tuner_addr = ADDR_UNSET,
661 },
662 [BTTV_BOARD_MODTEC_205] = {
663 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
664 .video_inputs = 3,
665 /* .audio_inputs= 1, */
666 .svhs = NO_SVHS,
667 .has_dig_in = 1,
668 .gpiomask = 7,
669 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
670 /* .digital_mode= DIGITAL_MODE_CAMERA, */
671 .gpiomux = { 0, 0, 0, 0 },
672 .no_msp34xx = 1,
673 .pll = PLL_28,
674 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
675 .tuner_addr = ADDR_UNSET,
676 },
677
678 /* ---- card 0x18 ---------------------------------- */
679 [BTTV_BOARD_MAGICTVIEW061] = {
680 .name = "Askey CPH05X/06X (bt878) [many vendors]",
681 .video_inputs = 3,
682 /* .audio_inputs= 1, */
683 .svhs = 2,
684 .gpiomask = 0xe00,
685 .muxsel = MUXSEL(2, 3, 1, 1),
686 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
687 .gpiomute = 0xc00,
688 .needs_tvaudio = 1,
689 .pll = PLL_28,
690 .tuner_type = UNSET,
691 .tuner_addr = ADDR_UNSET,
692 .has_remote = 1,
693 },
694 [BTTV_BOARD_VOBIS_BOOSTAR] = {
695 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
696 .video_inputs = 3,
697 /* .audio_inputs= 1, */
698 .svhs = 2,
699 .gpiomask = 0x1f0fff,
700 .muxsel = MUXSEL(2, 3, 1, 1),
701 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
702 .gpiomute = 0x40000,
703 .needs_tvaudio = 0,
704 .tuner_type = TUNER_PHILIPS_PAL,
705 .tuner_addr = ADDR_UNSET,
706 .audio_mode_gpio= terratv_audio,
707 },
708 [BTTV_BOARD_HAUPPAUG_WCAM] = {
709 .name = "Hauppauge WinCam newer (bt878)",
710 .video_inputs = 4,
711 /* .audio_inputs= 1, */
712 .svhs = 3,
713 .gpiomask = 7,
714 .muxsel = MUXSEL(2, 0, 1, 1),
715 .gpiomux = { 0, 1, 2, 3 },
716 .gpiomute = 4,
717 .needs_tvaudio = 1,
718 .tuner_type = UNSET,
719 .tuner_addr = ADDR_UNSET,
720 },
721 [BTTV_BOARD_MAXI] = {
722 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
723 .video_inputs = 4,
724 /* .audio_inputs= 2, */
725 .svhs = 2,
726 .gpiomask = 0x1800,
727 .muxsel = MUXSEL(2, 3, 1, 1),
728 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
729 .gpiomute = 0x1800,
730 .pll = PLL_28,
731 .tuner_type = TUNER_PHILIPS_SECAM,
732 .tuner_addr = ADDR_UNSET,
733 },
734
735 /* ---- card 0x1c ---------------------------------- */
736 [BTTV_BOARD_TERRATV] = {
737 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
738 .video_inputs = 3,
739 /* .audio_inputs= 1, */
740 .svhs = 2,
741 .gpiomask = 0x1f0fff,
742 .muxsel = MUXSEL(2, 3, 1, 1),
743 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
744 .gpiomute = 0x40000,
745 .needs_tvaudio = 0,
746 .tuner_type = TUNER_PHILIPS_PAL,
747 .tuner_addr = ADDR_UNSET,
748 .audio_mode_gpio= terratv_audio,
749 /* GPIO wiring:
750 External 20 pin connector (for Active Radio Upgrade board)
751 gpio00: i2c-sda
752 gpio01: i2c-scl
753 gpio02: om5610-data
754 gpio03: om5610-clk
755 gpio04: om5610-wre
756 gpio05: om5610-stereo
757 gpio06: rds6588-davn
758 gpio07: Pin 7 n.c.
759 gpio08: nIOW
760 gpio09+10: nIOR, nSEL ?? (bt878)
761 gpio09: nIOR (bt848)
762 gpio10: nSEL (bt848)
763 Sound Routing:
764 gpio16: u2-A0 (1st 4052bt)
765 gpio17: u2-A1
766 gpio18: u2-nEN
767 gpio19: u4-A0 (2nd 4052)
768 gpio20: u4-A1
769 u4-nEN - GND
770 Btspy:
771 00000 : Cdrom (internal audio input)
772 10000 : ext. Video audio input
773 20000 : TV Mono
774 a0000 : TV Mono/2
775 1a0000 : TV Stereo
776 30000 : Radio
777 40000 : Mute
778 */
779
780 },
781 [BTTV_BOARD_PXC200] = {
782 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
783 .name = "Imagenation PXC200",
784 .video_inputs = 5,
785 /* .audio_inputs= 1, */
786 .svhs = 1, /* was: 4 */
787 .gpiomask = 0,
788 .muxsel = MUXSEL(2, 3, 1, 0, 0),
789 .gpiomux = { 0 },
790 .needs_tvaudio = 1,
791 .tuner_type = TUNER_ABSENT,
792 .tuner_addr = ADDR_UNSET,
793 .muxsel_hook = PXC200_muxsel,
794
795 },
796 [BTTV_BOARD_FLYVIDEO_98] = {
797 .name = "Lifeview FlyVideo 98 LR50",
798 .video_inputs = 4,
799 /* .audio_inputs= 1, */
800 .svhs = 2,
801 .gpiomask = 0x1800, /* 0x8dfe00 */
802 .muxsel = MUXSEL(2, 3, 1, 1),
803 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
804 .gpiomute = 0x1800,
805 .pll = PLL_28,
806 .tuner_type = UNSET,
807 .tuner_addr = ADDR_UNSET,
808 },
809 [BTTV_BOARD_IPROTV] = {
810 .name = "Formac iProTV, Formac ProTV I (bt848)",
811 .video_inputs = 4,
812 /* .audio_inputs= 1, */
813 .svhs = 3,
814 .gpiomask = 1,
815 .muxsel = MUXSEL(2, 3, 1, 1),
816 .gpiomux = { 1, 0, 0, 0 },
817 .pll = PLL_28,
818 .tuner_type = TUNER_PHILIPS_PAL,
819 .tuner_addr = ADDR_UNSET,
820 },
821
822 /* ---- card 0x20 ---------------------------------- */
823 [BTTV_BOARD_INTEL_C_S_PCI] = {
824 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
825 .video_inputs = 4,
826 /* .audio_inputs= 0, */
827 .svhs = 2,
828 .gpiomask = 0,
829 .muxsel = MUXSEL(2, 3, 1, 1),
830 .gpiomux = { 0 },
831 .needs_tvaudio = 0,
832 .tuner_type = TUNER_ABSENT,
833 .tuner_addr = ADDR_UNSET,
834 },
835 [BTTV_BOARD_TERRATVALUE] = {
836 .name = "Terratec TerraTValue Version Bt878",
837 .video_inputs = 3,
838 /* .audio_inputs= 1, */
839 .svhs = 2,
840 .gpiomask = 0xffff00,
841 .muxsel = MUXSEL(2, 3, 1, 1),
842 .gpiomux = { 0x500, 0, 0x300, 0x900 },
843 .gpiomute = 0x900,
844 .needs_tvaudio = 1,
845 .pll = PLL_28,
846 .tuner_type = TUNER_PHILIPS_PAL,
847 .tuner_addr = ADDR_UNSET,
848 },
849 [BTTV_BOARD_WINFAST2000] = {
850 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
851 .video_inputs = 4,
852 /* .audio_inputs= 1, */
853 .svhs = 2,
854 /* TV, CVid, SVid, CVid over SVid connector */
855 .muxsel = MUXSEL(2, 3, 1, 1, 0),
856 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
857 .gpiomask = 0xb33000,
858 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
859 .gpiomute = 0x800000,
860 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
861 gpio23 -- hef4052:nEnable (0x800000)
862 gpio12 -- hef4052:A1
863 gpio13 -- hef4052:A0
864 0x0000: external audio
865 0x1000: FM
866 0x2000: TV
867 0x3000: n.c.
868 Note: There exists another variant "Winfast 2000" with tv stereo !?
869 Note: eeprom only contains FF and pci subsystem id 107d:6606
870 */
871 .needs_tvaudio = 0,
872 .pll = PLL_28,
873 .has_radio = 1,
874 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
875 .tuner_addr = ADDR_UNSET,
876 .audio_mode_gpio= winfast2000_audio,
877 .has_remote = 1,
878 },
879 [BTTV_BOARD_CHRONOS_VS2] = {
880 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
881 .video_inputs = 4,
882 /* .audio_inputs= 3, */
883 .svhs = 2,
884 .gpiomask = 0x1800,
885 .muxsel = MUXSEL(2, 3, 1, 1),
886 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
887 .gpiomute = 0x1800,
888 .pll = PLL_28,
889 .tuner_type = UNSET,
890 .tuner_addr = ADDR_UNSET,
891 },
892
893 /* ---- card 0x24 ---------------------------------- */
894 [BTTV_BOARD_TYPHOON_TVIEW] = {
895 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
896 .video_inputs = 4,
897 /* .audio_inputs= 3, */
898 .svhs = 2,
899 .gpiomask = 0x1800,
900 .muxsel = MUXSEL(2, 3, 1, 1),
901 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
902 .gpiomute = 0x1800,
903 .pll = PLL_28,
904 .tuner_type = UNSET,
905 .tuner_addr = ADDR_UNSET,
906 .has_radio = 1,
907 },
908 [BTTV_BOARD_PXELVWPLTVPRO] = {
909 .name = "Prolink PixelView PlayTV pro",
910 .video_inputs = 3,
911 /* .audio_inputs= 1, */
912 .svhs = 2,
913 .gpiomask = 0xff,
914 .muxsel = MUXSEL(2, 3, 1, 1),
915 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
916 .gpiomute = 0x29,
917 .no_msp34xx = 1,
918 .pll = PLL_28,
919 .tuner_type = UNSET,
920 .tuner_addr = ADDR_UNSET,
921 },
922 [BTTV_BOARD_MAGICTVIEW063] = {
923 .name = "Askey CPH06X TView99",
924 .video_inputs = 4,
925 /* .audio_inputs= 1, */
926 .svhs = 2,
927 .gpiomask = 0x551e00,
928 .muxsel = MUXSEL(2, 3, 1, 0),
929 .gpiomux = { 0x551400, 0x551200, 0, 0 },
930 .gpiomute = 0x551c00,
931 .needs_tvaudio = 1,
932 .pll = PLL_28,
933 .tuner_type = TUNER_PHILIPS_PAL_I,
934 .tuner_addr = ADDR_UNSET,
935 .has_remote = 1,
936 },
937 [BTTV_BOARD_PINNACLE] = {
938 .name = "Pinnacle PCTV Studio/Rave",
939 .video_inputs = 3,
940 /* .audio_inputs= 1, */
941 .svhs = 2,
942 .gpiomask = 0x03000F,
943 .muxsel = MUXSEL(2, 3, 1, 1),
944 .gpiomux = { 2, 0xd0001, 0, 0 },
945 .gpiomute = 1,
946 .needs_tvaudio = 0,
947 .pll = PLL_28,
948 .tuner_type = UNSET,
949 .tuner_addr = ADDR_UNSET,
950 },
951
952 /* ---- card 0x28 ---------------------------------- */
953 [BTTV_BOARD_STB2] = {
954 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
955 .video_inputs = 3,
956 /* .audio_inputs= 1, */
957 .svhs = 2,
958 .gpiomask = 7,
959 .muxsel = MUXSEL(2, 3, 1, 1),
960 .gpiomux = { 4, 0, 2, 3 },
961 .gpiomute = 1,
962 .no_msp34xx = 1,
963 .needs_tvaudio = 1,
964 .tuner_type = TUNER_PHILIPS_NTSC,
965 .tuner_addr = ADDR_UNSET,
966 .pll = PLL_28,
967 .has_radio = 1,
968 },
969 [BTTV_BOARD_AVPHONE98] = {
970 .name = "AVerMedia TVPhone 98",
971 .video_inputs = 3,
972 /* .audio_inputs= 4, */
973 .svhs = 2,
974 .gpiomask = 15,
975 .muxsel = MUXSEL(2, 3, 1, 1),
976 .gpiomux = { 13, 4, 11, 7 },
977 .needs_tvaudio = 1,
978 .pll = PLL_28,
979 .tuner_type = UNSET,
980 .tuner_addr = ADDR_UNSET,
981 .has_radio = 1,
982 .audio_mode_gpio= avermedia_tvphone_audio,
983 },
984 [BTTV_BOARD_PV951] = {
985 .name = "ProVideo PV951", /* pic16c54 */
986 .video_inputs = 3,
987 /* .audio_inputs= 1, */
988 .svhs = 2,
989 .gpiomask = 0,
990 .muxsel = MUXSEL(2, 3, 1, 1),
991 .gpiomux = { 0, 0, 0, 0},
992 .needs_tvaudio = 1,
993 .no_msp34xx = 1,
994 .pll = PLL_28,
995 .tuner_type = TUNER_PHILIPS_PAL_I,
996 .tuner_addr = ADDR_UNSET,
997 },
998 [BTTV_BOARD_ONAIR_TV] = {
999 .name = "Little OnAir TV",
1000 .video_inputs = 3,
1001 /* .audio_inputs= 1, */
1002 .svhs = 2,
1003 .gpiomask = 0xe00b,
1004 .muxsel = MUXSEL(2, 3, 1, 1),
1005 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1006 .gpiomute = 0xff3ffc,
1007 .no_msp34xx = 1,
1008 .tuner_type = UNSET,
1009 .tuner_addr = ADDR_UNSET,
1010 },
1011
1012 /* ---- card 0x2c ---------------------------------- */
1013 [BTTV_BOARD_SIGMA_TVII_FM] = {
1014 .name = "Sigma TVII-FM",
1015 .video_inputs = 2,
1016 /* .audio_inputs= 1, */
1017 .svhs = NO_SVHS,
1018 .gpiomask = 3,
1019 .muxsel = MUXSEL(2, 3, 1, 1),
1020 .gpiomux = { 1, 1, 0, 2 },
1021 .gpiomute = 3,
1022 .no_msp34xx = 1,
1023 .pll = PLL_NONE,
1024 .tuner_type = UNSET,
1025 .tuner_addr = ADDR_UNSET,
1026 },
1027 [BTTV_BOARD_MATRIX_VISION2] = {
1028 .name = "MATRIX-Vision MV-Delta 2",
1029 .video_inputs = 5,
1030 /* .audio_inputs= 1, */
1031 .svhs = 3,
1032 .gpiomask = 0,
1033 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1034 .gpiomux = { 0 },
1035 .no_msp34xx = 1,
1036 .pll = PLL_28,
1037 .tuner_type = TUNER_ABSENT,
1038 .tuner_addr = ADDR_UNSET,
1039 },
1040 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1041 .name = "Zoltrix Genie TV/FM",
1042 .video_inputs = 3,
1043 /* .audio_inputs= 1, */
1044 .svhs = 2,
1045 .gpiomask = 0xbcf03f,
1046 .muxsel = MUXSEL(2, 3, 1, 1),
1047 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1048 .gpiomute = 0xbcb03f,
1049 .no_msp34xx = 1,
1050 .pll = PLL_28,
1051 .tuner_type = TUNER_TEMIC_4039FR5_NTSC,
1052 .tuner_addr = ADDR_UNSET,
1053 },
1054 [BTTV_BOARD_TERRATVRADIO] = {
1055 .name = "Terratec TV/Radio+",
1056 .video_inputs = 3,
1057 /* .audio_inputs= 1, */
1058 .svhs = 2,
1059 .gpiomask = 0x70000,
1060 .muxsel = MUXSEL(2, 3, 1, 1),
1061 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1062 .gpiomute = 0x40000,
1063 .needs_tvaudio = 1,
1064 .no_msp34xx = 1,
1065 .pll = PLL_35,
1066 .tuner_type = TUNER_PHILIPS_PAL_I,
1067 .tuner_addr = ADDR_UNSET,
1068 .has_radio = 1,
1069 },
1070
1071 /* ---- card 0x30 ---------------------------------- */
1072 [BTTV_BOARD_DYNALINK] = {
1073 .name = "Askey CPH03x/ Dynalink Magic TView",
1074 .video_inputs = 3,
1075 /* .audio_inputs= 1, */
1076 .svhs = 2,
1077 .gpiomask = 15,
1078 .muxsel = MUXSEL(2, 3, 1, 1),
1079 .gpiomux = {2,0,0,0 },
1080 .gpiomute = 1,
1081 .needs_tvaudio = 1,
1082 .pll = PLL_28,
1083 .tuner_type = UNSET,
1084 .tuner_addr = ADDR_UNSET,
1085 },
1086 [BTTV_BOARD_GVBCTV3PCI] = {
1087 .name = "IODATA GV-BCTV3/PCI",
1088 .video_inputs = 3,
1089 /* .audio_inputs= 1, */
1090 .svhs = 2,
1091 .gpiomask = 0x010f00,
1092 .muxsel = MUXSEL(2, 3, 0, 0),
1093 .gpiomux = {0x10000, 0, 0x10000, 0 },
1094 .no_msp34xx = 1,
1095 .pll = PLL_28,
1096 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1097 .tuner_addr = ADDR_UNSET,
1098 .audio_mode_gpio= gvbctv3pci_audio,
1099 },
1100 [BTTV_BOARD_PXELVWPLTVPAK] = {
1101 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1102 .video_inputs = 5,
1103 /* .audio_inputs= 1, */
1104 .svhs = 3,
1105 .has_dig_in = 1,
1106 .gpiomask = 0xAA0000,
1107 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1108 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1109 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1110 .gpiomute = 0xa8000,
1111 .no_msp34xx = 1,
1112 .pll = PLL_28,
1113 .tuner_type = TUNER_PHILIPS_PAL_I,
1114 .tuner_addr = ADDR_UNSET,
1115 .has_remote = 1,
1116 /* GPIO wiring: (different from Rev.4C !)
1117 GPIO17: U4.A0 (first hef4052bt)
1118 GPIO19: U4.A1
1119 GPIO20: U5.A1 (second hef4052bt)
1120 GPIO21: U4.nEN
1121 GPIO22: BT832 Reset Line
1122 GPIO23: A5,A0, U5,nEN
1123 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1124 */
1125 },
1126 [BTTV_BOARD_EAGLE] = {
1127 .name = "Eagle Wireless Capricorn2 (bt878A)",
1128 .video_inputs = 4,
1129 /* .audio_inputs= 1, */
1130 .svhs = 2,
1131 .gpiomask = 7,
1132 .muxsel = MUXSEL(2, 0, 1, 1),
1133 .gpiomux = { 0, 1, 2, 3 },
1134 .gpiomute = 4,
1135 .pll = PLL_28,
1136 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1137 .tuner_addr = ADDR_UNSET,
1138 },
1139
1140 /* ---- card 0x34 ---------------------------------- */
1141 [BTTV_BOARD_PINNACLEPRO] = {
1142 /* David Härdeman <david@2gen.com> */
1143 .name = "Pinnacle PCTV Studio Pro",
1144 .video_inputs = 4,
1145 /* .audio_inputs= 1, */
1146 .svhs = 3,
1147 .gpiomask = 0x03000F,
1148 .muxsel = MUXSEL(2, 3, 1, 1),
1149 .gpiomux = { 1, 0xd0001, 0, 0 },
1150 .gpiomute = 10,
1151 /* sound path (5 sources):
1152 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1153 0= ext. Audio IN
1154 1= from MUX2
1155 2= Mono TV sound from Tuner
1156 3= not connected
1157 MUX2 (mask 0x30000):
1158 0,2,3= from MSP34xx
1159 1= FM stereo Radio from Tuner */
1160 .needs_tvaudio = 0,
1161 .pll = PLL_28,
1162 .tuner_type = UNSET,
1163 .tuner_addr = ADDR_UNSET,
1164 },
1165 [BTTV_BOARD_TVIEW_RDS_FM] = {
1166 /* Claas Langbehn <claas@bigfoot.com>,
1167 Sven Grothklags <sven@upb.de> */
1168 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1169 .video_inputs = 4,
1170 /* .audio_inputs= 3, */
1171 .svhs = 2,
1172 .gpiomask = 0x1c,
1173 .muxsel = MUXSEL(2, 3, 1, 1),
1174 .gpiomux = { 0, 0, 0x10, 8 },
1175 .gpiomute = 4,
1176 .needs_tvaudio = 1,
1177 .pll = PLL_28,
1178 .tuner_type = TUNER_PHILIPS_PAL,
1179 .tuner_addr = ADDR_UNSET,
1180 .has_radio = 1,
1181 },
1182 [BTTV_BOARD_LIFETEC_9415] = {
1183 /* Tim Röstermundt <rosterm@uni-muenster.de>
1184 in de.comp.os.unix.linux.hardware:
1185 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1186 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1187 options tuner type=5 */
1188 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1189 .video_inputs = 4,
1190 /* .audio_inputs= 1, */
1191 .svhs = 2,
1192 .gpiomask = 0x18e0,
1193 .muxsel = MUXSEL(2, 3, 1, 1),
1194 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1195 .gpiomute = 0x18e0,
1196 /* For cards with tda9820/tda9821:
1197 0x0000: Tuner normal stereo
1198 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1199 0x0880: Tuner A2 stereo */
1200 .pll = PLL_28,
1201 .tuner_type = UNSET,
1202 .tuner_addr = ADDR_UNSET,
1203 },
1204 [BTTV_BOARD_BESTBUY_EASYTV] = {
1205 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1206 old Easy TV BT848 version (model CPH031) */
1207 .name = "Askey CPH031/ BESTBUY Easy TV",
1208 .video_inputs = 4,
1209 /* .audio_inputs= 1, */
1210 .svhs = 2,
1211 .gpiomask = 0xF,
1212 .muxsel = MUXSEL(2, 3, 1, 0),
1213 .gpiomux = { 2, 0, 0, 0 },
1214 .gpiomute = 10,
1215 .needs_tvaudio = 0,
1216 .pll = PLL_28,
1217 .tuner_type = TUNER_TEMIC_PAL,
1218 .tuner_addr = ADDR_UNSET,
1219 },
1220
1221 /* ---- card 0x38 ---------------------------------- */
1222 [BTTV_BOARD_FLYVIDEO_98FM] = {
1223 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1224 .name = "Lifeview FlyVideo 98FM LR50",
1225 .video_inputs = 4,
1226 /* .audio_inputs= 3, */
1227 .svhs = 2,
1228 .gpiomask = 0x1800,
1229 .muxsel = MUXSEL(2, 3, 1, 1),
1230 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1231 .gpiomute = 0x1800,
1232 .pll = PLL_28,
1233 .tuner_type = TUNER_PHILIPS_PAL,
1234 .tuner_addr = ADDR_UNSET,
1235 },
1236 /* This is the ultimate cheapo capture card
1237 * just a BT848A on a small PCB!
1238 * Steve Hosgood <steve@equiinet.com> */
1239 [BTTV_BOARD_GRANDTEC] = {
1240 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1241 .video_inputs = 2,
1242 /* .audio_inputs= 0, */
1243 .svhs = 1,
1244 .gpiomask = 0,
1245 .muxsel = MUXSEL(3, 1),
1246 .gpiomux = { 0 },
1247 .needs_tvaudio = 0,
1248 .no_msp34xx = 1,
1249 .pll = PLL_35,
1250 .tuner_type = TUNER_ABSENT,
1251 .tuner_addr = ADDR_UNSET,
1252 },
1253 [BTTV_BOARD_ASKEY_CPH060] = {
1254 /* Daniel Herrington <daniel.herrington@home.com> */
1255 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1256 .video_inputs = 3,
1257 /* .audio_inputs= 1, */
1258 .svhs = 2,
1259 .gpiomask = 0xe00,
1260 .muxsel = MUXSEL(2, 3, 1, 1),
1261 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1262 .gpiomute = 0x800,
1263 .needs_tvaudio = 1,
1264 .pll = PLL_28,
1265 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1266 .tuner_addr = ADDR_UNSET,
1267 },
1268 [BTTV_BOARD_ASKEY_CPH03X] = {
1269 /* Matti Mottus <mottus@physic.ut.ee> */
1270 .name = "Askey CPH03x TV Capturer",
1271 .video_inputs = 4,
1272 /* .audio_inputs= 1, */
1273 .svhs = 2,
1274 .gpiomask = 0x03000F,
1275 .muxsel = MUXSEL(2, 3, 1, 0),
1276 .gpiomux = { 2, 0, 0, 0 },
1277 .gpiomute = 1,
1278 .pll = PLL_28,
1279 .tuner_type = TUNER_TEMIC_PAL,
1280 .tuner_addr = ADDR_UNSET,
1281 .has_remote = 1,
1282 },
1283
1284 /* ---- card 0x3c ---------------------------------- */
1285 [BTTV_BOARD_MM100PCTV] = {
1286 /* Philip Blundell <philb@gnu.org> */
1287 .name = "Modular Technology MM100PCTV",
1288 .video_inputs = 2,
1289 /* .audio_inputs= 2, */
1290 .svhs = NO_SVHS,
1291 .gpiomask = 11,
1292 .muxsel = MUXSEL(2, 3, 1, 1),
1293 .gpiomux = { 2, 0, 0, 1 },
1294 .gpiomute = 8,
1295 .pll = PLL_35,
1296 .tuner_type = TUNER_TEMIC_PAL,
1297 .tuner_addr = ADDR_UNSET,
1298 },
1299 [BTTV_BOARD_GMV1] = {
1300 /* Adrian Cox <adrian@humboldt.co.uk */
1301 .name = "AG Electronics GMV1",
1302 .video_inputs = 2,
1303 /* .audio_inputs= 0, */
1304 .svhs = 1,
1305 .gpiomask = 0xF,
1306 .muxsel = MUXSEL(2, 2),
1307 .gpiomux = { },
1308 .no_msp34xx = 1,
1309 .needs_tvaudio = 0,
1310 .pll = PLL_28,
1311 .tuner_type = TUNER_ABSENT,
1312 .tuner_addr = ADDR_UNSET,
1313 },
1314 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1315 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1316 new Easy TV BT878 version (model CPH061)
1317 special thanks to Informatica Mieres for providing the card */
1318 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1319 .video_inputs = 3,
1320 /* .audio_inputs= 2, */
1321 .svhs = 2,
1322 .gpiomask = 0xFF,
1323 .muxsel = MUXSEL(2, 3, 1, 0),
1324 .gpiomux = { 1, 0, 4, 4 },
1325 .gpiomute = 9,
1326 .needs_tvaudio = 0,
1327 .pll = PLL_28,
1328 .tuner_type = TUNER_PHILIPS_PAL,
1329 .tuner_addr = ADDR_UNSET,
1330 },
1331 [BTTV_BOARD_ATI_TVWONDER] = {
1332 /* Lukas Gebauer <geby@volny.cz> */
1333 .name = "ATI TV-Wonder",
1334 .video_inputs = 3,
1335 /* .audio_inputs= 1, */
1336 .svhs = 2,
1337 .gpiomask = 0xf03f,
1338 .muxsel = MUXSEL(2, 3, 1, 0),
1339 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1340 .gpiomute = 0xbffe,
1341 .pll = PLL_28,
1342 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1343 .tuner_addr = ADDR_UNSET,
1344 },
1345
1346 /* ---- card 0x40 ---------------------------------- */
1347 [BTTV_BOARD_ATI_TVWONDERVE] = {
1348 /* Lukas Gebauer <geby@volny.cz> */
1349 .name = "ATI TV-Wonder VE",
1350 .video_inputs = 2,
1351 /* .audio_inputs= 1, */
1352 .svhs = NO_SVHS,
1353 .gpiomask = 1,
1354 .muxsel = MUXSEL(2, 3, 0, 1),
1355 .gpiomux = { 0, 0, 1, 0 },
1356 .no_msp34xx = 1,
1357 .pll = PLL_28,
1358 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1359 .tuner_addr = ADDR_UNSET,
1360 },
1361 [BTTV_BOARD_FLYVIDEO2000] = {
1362 /* DeeJay <deejay@westel900.net (2000S) */
1363 .name = "Lifeview FlyVideo 2000S LR90",
1364 .video_inputs = 3,
1365 /* .audio_inputs= 3, */
1366 .svhs = 2,
1367 .gpiomask = 0x18e0,
1368 .muxsel = MUXSEL(2, 3, 0, 1),
1369 /* Radio changed from 1e80 to 0x800 to make
1370 FlyVideo2000S in .hu happy (gm)*/
1371 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1372 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1373 .gpiomute = 0x1800,
1374 .audio_mode_gpio= fv2000s_audio,
1375 .no_msp34xx = 1,
1376 .needs_tvaudio = 1,
1377 .pll = PLL_28,
1378 .tuner_type = TUNER_PHILIPS_PAL,
1379 .tuner_addr = ADDR_UNSET,
1380 },
1381 [BTTV_BOARD_TERRATVALUER] = {
1382 .name = "Terratec TValueRadio",
1383 .video_inputs = 3,
1384 /* .audio_inputs= 1, */
1385 .svhs = 2,
1386 .gpiomask = 0xffff00,
1387 .muxsel = MUXSEL(2, 3, 1, 1),
1388 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1389 .gpiomute = 0x900,
1390 .needs_tvaudio = 1,
1391 .pll = PLL_28,
1392 .tuner_type = TUNER_PHILIPS_PAL,
1393 .tuner_addr = ADDR_UNSET,
1394 .has_radio = 1,
1395 },
1396 [BTTV_BOARD_GVBCTV4PCI] = {
1397 /* TANAKA Kei <peg00625@nifty.com> */
1398 .name = "IODATA GV-BCTV4/PCI",
1399 .video_inputs = 3,
1400 /* .audio_inputs= 1, */
1401 .svhs = 2,
1402 .gpiomask = 0x010f00,
1403 .muxsel = MUXSEL(2, 3, 0, 0),
1404 .gpiomux = {0x10000, 0, 0x10000, 0 },
1405 .no_msp34xx = 1,
1406 .pll = PLL_28,
1407 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1408 .tuner_addr = ADDR_UNSET,
1409 .audio_mode_gpio= gvbctv3pci_audio,
1410 },
1411
1412 /* ---- card 0x44 ---------------------------------- */
1413 [BTTV_BOARD_VOODOOTV_FM] = {
1414 .name = "3Dfx VoodooTV FM (Euro)",
1415 /* try "insmod msp3400 simple=0" if you have
1416 * sound problems with this card. */
1417 .video_inputs = 4,
1418 /* .audio_inputs= 1, */
1419 .svhs = NO_SVHS,
1420 .gpiomask = 0x4f8a00,
1421 /* 0x100000: 1=MSP enabled (0=disable again)
1422 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1423 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1424 .gpiomute = 0x947fff,
1425 /* tvtuner, radio, external,internal, mute, stereo
1426 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1427 .muxsel = MUXSEL(2, 3, 0, 1),
1428 .tuner_type = TUNER_MT2032,
1429 .tuner_addr = ADDR_UNSET,
1430 .pll = PLL_28,
1431 .has_radio = 1,
1432 },
1433 [BTTV_BOARD_VOODOOTV_200] = {
1434 .name = "VoodooTV 200 (USA)",
1435 /* try "insmod msp3400 simple=0" if you have
1436 * sound problems with this card. */
1437 .video_inputs = 4,
1438 /* .audio_inputs= 1, */
1439 .svhs = NO_SVHS,
1440 .gpiomask = 0x4f8a00,
1441 /* 0x100000: 1=MSP enabled (0=disable again)
1442 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1443 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1444 .gpiomute = 0x947fff,
1445 /* tvtuner, radio, external,internal, mute, stereo
1446 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1447 .muxsel = MUXSEL(2, 3, 0, 1),
1448 .tuner_type = TUNER_MT2032,
1449 .tuner_addr = ADDR_UNSET,
1450 .pll = PLL_28,
1451 .has_radio = 1,
1452 },
1453 [BTTV_BOARD_AIMMS] = {
1454 /* Philip Blundell <pb@nexus.co.uk> */
1455 .name = "Active Imaging AIMMS",
1456 .video_inputs = 1,
1457 /* .audio_inputs= 0, */
1458 .tuner_type = TUNER_ABSENT,
1459 .tuner_addr = ADDR_UNSET,
1460 .pll = PLL_28,
1461 .muxsel = MUXSEL(2),
1462 .gpiomask = 0
1463 },
1464 [BTTV_BOARD_PV_BT878P_PLUS] = {
1465 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1466 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1467 .video_inputs = 3,
1468 /* .audio_inputs= 4, */
1469 .svhs = 2,
1470 .gpiomask = 15,
1471 .muxsel = MUXSEL(2, 3, 1, 1),
1472 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1473 .gpiomute = 13,
1474 .needs_tvaudio = 1,
1475 .pll = PLL_28,
1476 .tuner_type = TUNER_LG_PAL_I_FM,
1477 .tuner_addr = ADDR_UNSET,
1478 .has_remote = 1,
1479 /* GPIO wiring:
1480 GPIO0: U4.A0 (hef4052bt)
1481 GPIO1: U4.A1
1482 GPIO2: U4.A1 (second hef4052bt)
1483 GPIO3: U4.nEN, U5.A0, A5.nEN
1484 GPIO8-15: vrd866b ?
1485 */
1486 },
1487 [BTTV_BOARD_FLYVIDEO98EZ] = {
1488 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1489 .video_inputs = 4,
1490 /* .audio_inputs= 0, */
1491 .svhs = 2,
1492 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1493 .muxsel = MUXSEL(2, 3, 1, 1),
1494 .pll = PLL_28,
1495 .no_msp34xx = 1,
1496 .tuner_type = TUNER_ABSENT,
1497 .tuner_addr = ADDR_UNSET,
1498 },
1499
1500 /* ---- card 0x48 ---------------------------------- */
1501 [BTTV_BOARD_PV_BT878P_9B] = {
1502 /* Dariusz Kowalewski <darekk@automex.pl> */
1503 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1504 .video_inputs = 4,
1505 /* .audio_inputs= 1, */
1506 .svhs = 2,
1507 .gpiomask = 0x3f,
1508 .muxsel = MUXSEL(2, 3, 1, 1),
1509 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1510 .gpiomute = 0x09,
1511 .needs_tvaudio = 1,
1512 .no_msp34xx = 1,
1513 .pll = PLL_28,
1514 .tuner_type = TUNER_PHILIPS_PAL,
1515 .tuner_addr = ADDR_UNSET,
1516 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1517 .has_radio = 1, /* Note: not all cards have radio */
1518 .has_remote = 1,
1519 /* GPIO wiring:
1520 GPIO0: A0 hef4052
1521 GPIO1: A1 hef4052
1522 GPIO3: nEN hef4052
1523 GPIO8-15: vrd866b
1524 GPIO20,22,23: R30,R29,R28
1525 */
1526 },
1527 [BTTV_BOARD_SENSORAY311] = {
1528 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1529 /* you must jumper JP5 for the card to work */
1530 .name = "Sensoray 311",
1531 .video_inputs = 5,
1532 /* .audio_inputs= 0, */
1533 .svhs = 4,
1534 .gpiomask = 0,
1535 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1536 .gpiomux = { 0 },
1537 .needs_tvaudio = 0,
1538 .tuner_type = TUNER_ABSENT,
1539 .tuner_addr = ADDR_UNSET,
1540 },
1541 [BTTV_BOARD_RV605] = {
1542 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1543 .name = "RemoteVision MX (RV605)",
1544 .video_inputs = 16,
1545 /* .audio_inputs= 0, */
1546 .svhs = NO_SVHS,
1547 .gpiomask = 0x00,
1548 .gpiomask2 = 0x07ff,
1549 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1550 .no_msp34xx = 1,
1551 .tuner_type = TUNER_ABSENT,
1552 .tuner_addr = ADDR_UNSET,
1553 .muxsel_hook = rv605_muxsel,
1554 },
1555 [BTTV_BOARD_POWERCLR_MTV878] = {
1556 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1557 .video_inputs = 3,
1558 /* .audio_inputs= 2, */
1559 .svhs = 2,
1560 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1561 .muxsel = MUXSEL(2, 1, 1),
1562 .gpiomux = { 0, 1, 2, 2 },
1563 .gpiomute = 4,
1564 .needs_tvaudio = 0,
1565 .tuner_type = TUNER_PHILIPS_PAL,
1566 .tuner_addr = ADDR_UNSET,
1567 .pll = PLL_28,
1568 .has_radio = 1,
1569 },
1570
1571 /* ---- card 0x4c ---------------------------------- */
1572 [BTTV_BOARD_WINDVR] = {
1573 /* Masaki Suzuki <masaki@btree.org> */
1574 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1575 .video_inputs = 3,
1576 /* .audio_inputs= 1, */
1577 .svhs = 2,
1578 .gpiomask = 0x140007,
1579 .muxsel = MUXSEL(2, 3, 1, 1),
1580 .gpiomux = { 0, 1, 2, 3 },
1581 .gpiomute = 4,
1582 .tuner_type = TUNER_PHILIPS_NTSC,
1583 .tuner_addr = ADDR_UNSET,
1584 .audio_mode_gpio= windvr_audio,
1585 },
1586 [BTTV_BOARD_GRANDTEC_MULTI] = {
1587 .name = "GrandTec Multi Capture Card (Bt878)",
1588 .video_inputs = 4,
1589 /* .audio_inputs= 0, */
1590 .svhs = NO_SVHS,
1591 .gpiomask = 0,
1592 .muxsel = MUXSEL(2, 3, 1, 0),
1593 .gpiomux = { 0 },
1594 .needs_tvaudio = 0,
1595 .no_msp34xx = 1,
1596 .pll = PLL_28,
1597 .tuner_type = TUNER_ABSENT,
1598 .tuner_addr = ADDR_UNSET,
1599 },
1600 [BTTV_BOARD_KWORLD] = {
1601 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1602 .video_inputs = 4,
1603 /* .audio_inputs= 3, */
1604 .svhs = 2,
1605 .gpiomask = 7,
1606 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1607 .muxsel = MUXSEL(2, 3, 1, 1),
1608 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1609 * This card lacks external Audio In, so we mute it on Ext. & Int.
1610 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1611 * This card lacks PCI subsystem ID, sigh.
1612 * gpiomux =1: lower volume, 2+3: mute
1613 * btwincap uses 0x80000/0x80003
1614 */
1615 .gpiomute = 4,
1616 .needs_tvaudio = 0,
1617 .no_msp34xx = 1,
1618 .pll = PLL_28,
1619 .tuner_type = TUNER_PHILIPS_PAL,
1620 .tuner_addr = ADDR_UNSET,
1621 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1622 radio signal strength indicators work fine. */
1623 .has_radio = 1,
1624 /* GPIO Info:
1625 GPIO0,1: HEF4052 A0,A1
1626 GPIO2: HEF4052 nENABLE
1627 GPIO3-7: n.c.
1628 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1629 GPIO14,15: ??
1630 GPIO16-21: n.c.
1631 GPIO22,23: ??
1632 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1633 },
1634 [BTTV_BOARD_DSP_TCVIDEO] = {
1635 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1636 .name = "DSP Design TCVIDEO",
1637 .video_inputs = 4,
1638 .svhs = NO_SVHS,
1639 .muxsel = MUXSEL(2, 3, 1, 0),
1640 .pll = PLL_28,
1641 .tuner_type = UNSET,
1642 .tuner_addr = ADDR_UNSET,
1643 },
1644
1645 /* ---- card 0x50 ---------------------------------- */
1646 [BTTV_BOARD_HAUPPAUGEPVR] = {
1647 .name = "Hauppauge WinTV PVR",
1648 .video_inputs = 4,
1649 /* .audio_inputs= 1, */
1650 .svhs = 2,
1651 .muxsel = MUXSEL(2, 0, 1, 1),
1652 .needs_tvaudio = 1,
1653 .pll = PLL_28,
1654 .tuner_type = UNSET,
1655 .tuner_addr = ADDR_UNSET,
1656
1657 .gpiomask = 7,
1658 .gpiomux = {7},
1659 },
1660 [BTTV_BOARD_GVBCTV5PCI] = {
1661 .name = "IODATA GV-BCTV5/PCI",
1662 .video_inputs = 3,
1663 /* .audio_inputs= 1, */
1664 .svhs = 2,
1665 .gpiomask = 0x0f0f80,
1666 .muxsel = MUXSEL(2, 3, 1, 0),
1667 .gpiomux = {0x030000, 0x010000, 0, 0 },
1668 .gpiomute = 0x020000,
1669 .no_msp34xx = 1,
1670 .pll = PLL_28,
1671 .tuner_type = TUNER_PHILIPS_NTSC_M,
1672 .tuner_addr = ADDR_UNSET,
1673 .audio_mode_gpio= gvbctv5pci_audio,
1674 .has_radio = 1,
1675 },
1676 [BTTV_BOARD_OSPREY1x0] = {
1677 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1678 .video_inputs = 4, /* id-inputs-clock */
1679 /* .audio_inputs= 0, */
1680 .svhs = 3,
1681 .muxsel = MUXSEL(3, 2, 0, 1),
1682 .pll = PLL_28,
1683 .tuner_type = TUNER_ABSENT,
1684 .tuner_addr = ADDR_UNSET,
1685 .no_msp34xx = 1,
1686 .no_tda7432 = 1,
1687 },
1688 [BTTV_BOARD_OSPREY1x0_848] = {
1689 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1690 .video_inputs = 3,
1691 /* .audio_inputs= 0, */
1692 .svhs = 2,
1693 .muxsel = MUXSEL(2, 3, 1),
1694 .pll = PLL_28,
1695 .tuner_type = TUNER_ABSENT,
1696 .tuner_addr = ADDR_UNSET,
1697 .no_msp34xx = 1,
1698 .no_tda7432 = 1,
1699 },
1700
1701 /* ---- card 0x54 ---------------------------------- */
1702 [BTTV_BOARD_OSPREY101_848] = {
1703 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1704 .video_inputs = 2,
1705 /* .audio_inputs= 0, */
1706 .svhs = 1,
1707 .muxsel = MUXSEL(3, 1),
1708 .pll = PLL_28,
1709 .tuner_type = TUNER_ABSENT,
1710 .tuner_addr = ADDR_UNSET,
1711 .no_msp34xx = 1,
1712 .no_tda7432 = 1,
1713 },
1714 [BTTV_BOARD_OSPREY1x1] = {
1715 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1716 .video_inputs = 1,
1717 /* .audio_inputs= 0, */
1718 .svhs = NO_SVHS,
1719 .muxsel = MUXSEL(0),
1720 .pll = PLL_28,
1721 .tuner_type = TUNER_ABSENT,
1722 .tuner_addr = ADDR_UNSET,
1723 .no_msp34xx = 1,
1724 .no_tda7432 = 1,
1725 },
1726 [BTTV_BOARD_OSPREY1x1_SVID] = {
1727 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1728 .video_inputs = 2,
1729 /* .audio_inputs= 0, */
1730 .svhs = 1,
1731 .muxsel = MUXSEL(0, 1),
1732 .pll = PLL_28,
1733 .tuner_type = TUNER_ABSENT,
1734 .tuner_addr = ADDR_UNSET,
1735 .no_msp34xx = 1,
1736 .no_tda7432 = 1,
1737 },
1738 [BTTV_BOARD_OSPREY2xx] = {
1739 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1740 .video_inputs = 1,
1741 /* .audio_inputs= 1, */
1742 .svhs = NO_SVHS,
1743 .muxsel = MUXSEL(0),
1744 .pll = PLL_28,
1745 .tuner_type = TUNER_ABSENT,
1746 .tuner_addr = ADDR_UNSET,
1747 .no_msp34xx = 1,
1748 .no_tda7432 = 1,
1749 },
1750
1751 /* ---- card 0x58 ---------------------------------- */
1752 [BTTV_BOARD_OSPREY2x0_SVID] = {
1753 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1754 .video_inputs = 2,
1755 /* .audio_inputs= 1, */
1756 .svhs = 1,
1757 .muxsel = MUXSEL(0, 1),
1758 .pll = PLL_28,
1759 .tuner_type = TUNER_ABSENT,
1760 .tuner_addr = ADDR_UNSET,
1761 .no_msp34xx = 1,
1762 .no_tda7432 = 1,
1763 },
1764 [BTTV_BOARD_OSPREY2x0] = {
1765 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1766 .video_inputs = 2,
1767 /* .audio_inputs= 1, */
1768 .svhs = 1,
1769 .muxsel = MUXSEL(2, 3),
1770 .pll = PLL_28,
1771 .tuner_type = TUNER_ABSENT,
1772 .tuner_addr = ADDR_UNSET,
1773 .no_msp34xx = 1,
1774 .no_tda7432 = 1,
1775 },
1776 [BTTV_BOARD_OSPREY500] = {
1777 .name = "Osprey 500", /* 500 */
1778 .video_inputs = 2,
1779 /* .audio_inputs= 1, */
1780 .svhs = 1,
1781 .muxsel = MUXSEL(2, 3),
1782 .pll = PLL_28,
1783 .tuner_type = TUNER_ABSENT,
1784 .tuner_addr = ADDR_UNSET,
1785 .no_msp34xx = 1,
1786 .no_tda7432 = 1,
1787 },
1788 [BTTV_BOARD_OSPREY540] = {
1789 .name = "Osprey 540", /* 540 */
1790 .video_inputs = 4,
1791 /* .audio_inputs= 1, */
1792 .pll = PLL_28,
1793 .tuner_type = TUNER_ABSENT,
1794 .tuner_addr = ADDR_UNSET,
1795 .no_msp34xx = 1,
1796 .no_tda7432 = 1,
1797 },
1798
1799 /* ---- card 0x5C ---------------------------------- */
1800 [BTTV_BOARD_OSPREY2000] = {
1801 .name = "Osprey 2000", /* 2000 */
1802 .video_inputs = 2,
1803 /* .audio_inputs= 1, */
1804 .svhs = 1,
1805 .muxsel = MUXSEL(2, 3),
1806 .pll = PLL_28,
1807 .tuner_type = TUNER_ABSENT,
1808 .tuner_addr = ADDR_UNSET,
1809 .no_msp34xx = 1,
1810 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1811 },
1812 [BTTV_BOARD_IDS_EAGLE] = {
1813 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1814 .name = "IDS Eagle",
1815 .video_inputs = 4,
1816 /* .audio_inputs= 0, */
1817 .tuner_type = TUNER_ABSENT,
1818 .tuner_addr = ADDR_UNSET,
1819 .svhs = NO_SVHS,
1820 .gpiomask = 0,
1821 .muxsel = MUXSEL(2, 2, 2, 2),
1822 .muxsel_hook = eagle_muxsel,
1823 .no_msp34xx = 1,
1824 .pll = PLL_28,
1825 },
1826 [BTTV_BOARD_PINNACLESAT] = {
1827 .name = "Pinnacle PCTV Sat",
1828 .video_inputs = 2,
1829 /* .audio_inputs= 0, */
1830 .svhs = 1,
1831 .tuner_type = TUNER_ABSENT,
1832 .tuner_addr = ADDR_UNSET,
1833 .no_msp34xx = 1,
1834 .no_tda7432 = 1,
1835 .muxsel = MUXSEL(3, 1),
1836 .pll = PLL_28,
1837 .no_gpioirq = 1,
1838 .has_dvb = 1,
1839 },
1840 [BTTV_BOARD_FORMAC_PROTV] = {
1841 .name = "Formac ProTV II (bt878)",
1842 .video_inputs = 4,
1843 /* .audio_inputs= 1, */
1844 .svhs = 3,
1845 .gpiomask = 2,
1846 /* TV, Comp1, Composite over SVID con, SVID */
1847 .muxsel = MUXSEL(2, 3, 1, 1),
1848 .gpiomux = { 2, 2, 0, 0 },
1849 .pll = PLL_28,
1850 .has_radio = 1,
1851 .tuner_type = TUNER_PHILIPS_PAL,
1852 .tuner_addr = ADDR_UNSET,
1853 /* sound routing:
1854 GPIO=0x00,0x01,0x03: mute (?)
1855 0x02: both TV and radio (tuner: FM1216/I)
1856 The card has onboard audio connectors labeled "cdrom" and "board",
1857 not soldered here, though unknown wiring.
1858 Card lacks: external audio in, pci subsystem id.
1859 */
1860 },
1861
1862 /* ---- card 0x60 ---------------------------------- */
1863 [BTTV_BOARD_MACHTV] = {
1864 .name = "MachTV",
1865 .video_inputs = 3,
1866 /* .audio_inputs= 1, */
1867 .svhs = NO_SVHS,
1868 .gpiomask = 7,
1869 .muxsel = MUXSEL(2, 3, 1, 1),
1870 .gpiomux = { 0, 1, 2, 3},
1871 .gpiomute = 4,
1872 .needs_tvaudio = 1,
1873 .tuner_type = TUNER_PHILIPS_PAL,
1874 .tuner_addr = ADDR_UNSET,
1875 .pll = PLL_28,
1876 },
1877 [BTTV_BOARD_EURESYS_PICOLO] = {
1878 .name = "Euresys Picolo",
1879 .video_inputs = 3,
1880 /* .audio_inputs= 0, */
1881 .svhs = 2,
1882 .gpiomask = 0,
1883 .no_msp34xx = 1,
1884 .no_tda7432 = 1,
1885 .muxsel = MUXSEL(2, 0, 1),
1886 .pll = PLL_28,
1887 .tuner_type = TUNER_ABSENT,
1888 .tuner_addr = ADDR_UNSET,
1889 },
1890 [BTTV_BOARD_PV150] = {
1891 /* Luc Van Hoeylandt <luc@e-magic.be> */
1892 .name = "ProVideo PV150", /* 0x4f */
1893 .video_inputs = 2,
1894 /* .audio_inputs= 0, */
1895 .svhs = NO_SVHS,
1896 .gpiomask = 0,
1897 .muxsel = MUXSEL(2, 3),
1898 .gpiomux = { 0 },
1899 .needs_tvaudio = 0,
1900 .no_msp34xx = 1,
1901 .pll = PLL_28,
1902 .tuner_type = TUNER_ABSENT,
1903 .tuner_addr = ADDR_UNSET,
1904 },
1905 [BTTV_BOARD_AD_TVK503] = {
1906 /* Hiroshi Takekawa <sian@big.or.jp> */
1907 /* This card lacks subsystem ID */
1908 .name = "AD-TVK503", /* 0x63 */
1909 .video_inputs = 4,
1910 /* .audio_inputs= 1, */
1911 .svhs = 2,
1912 .gpiomask = 0x001e8007,
1913 .muxsel = MUXSEL(2, 3, 1, 0),
1914 /* Tuner, Radio, external, internal, off, on */
1915 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
1916 .gpiomute = 0x0f,
1917 .needs_tvaudio = 0,
1918 .no_msp34xx = 1,
1919 .pll = PLL_28,
1920 .tuner_type = TUNER_PHILIPS_NTSC,
1921 .tuner_addr = ADDR_UNSET,
1922 .audio_mode_gpio= adtvk503_audio,
1923 },
1924
1925 /* ---- card 0x64 ---------------------------------- */
1926 [BTTV_BOARD_HERCULES_SM_TV] = {
1927 .name = "Hercules Smart TV Stereo",
1928 .video_inputs = 4,
1929 /* .audio_inputs= 1, */
1930 .svhs = 2,
1931 .gpiomask = 0x00,
1932 .muxsel = MUXSEL(2, 3, 1, 1),
1933 .needs_tvaudio = 1,
1934 .no_msp34xx = 1,
1935 .pll = PLL_28,
1936 .tuner_type = TUNER_PHILIPS_PAL,
1937 .tuner_addr = ADDR_UNSET,
1938 /* Notes:
1939 - card lacks subsystem ID
1940 - stereo variant w/ daughter board with tda9874a @0xb0
1941 - Audio Routing:
1942 always from tda9874 independent of GPIO (?)
1943 external line in: unknown
1944 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1945 hef4053 (instead 4052) for unknown function
1946 */
1947 },
1948 [BTTV_BOARD_PACETV] = {
1949 .name = "Pace TV & Radio Card",
1950 .video_inputs = 4,
1951 /* .audio_inputs= 1, */
1952 .svhs = 2,
1953 /* Tuner, CVid, SVid, CVid over SVid connector */
1954 .muxsel = MUXSEL(2, 3, 1, 1),
1955 .gpiomask = 0,
1956 .no_tda7432 = 1,
1957 .tuner_type = TUNER_PHILIPS_PAL_I,
1958 .tuner_addr = ADDR_UNSET,
1959 .has_radio = 1,
1960 .pll = PLL_28,
1961 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1962 only internal line out: (4pin header) RGGL
1963 Radio must be decoded by msp3410d (not routed through)*/
1964 /*
1965 .digital_mode = DIGITAL_MODE_CAMERA, todo!
1966 */
1967 },
1968 [BTTV_BOARD_IVC200] = {
1969 /* Chris Willing <chris@vislab.usyd.edu.au> */
1970 .name = "IVC-200",
1971 .video_inputs = 1,
1972 /* .audio_inputs= 0, */
1973 .tuner_type = TUNER_ABSENT,
1974 .tuner_addr = ADDR_UNSET,
1975 .svhs = NO_SVHS,
1976 .gpiomask = 0xdf,
1977 .muxsel = MUXSEL(2),
1978 .pll = PLL_28,
1979 },
1980 [BTTV_BOARD_IVCE8784] = {
1981 .name = "IVCE-8784",
1982 .video_inputs = 1,
1983 /* .audio_inputs= 0, */
1984 .tuner_type = TUNER_ABSENT,
1985 .tuner_addr = ADDR_UNSET,
1986 .svhs = NO_SVHS,
1987 .gpiomask = 0xdf,
1988 .muxsel = MUXSEL(2),
1989 .pll = PLL_28,
1990 },
1991 [BTTV_BOARD_XGUARD] = {
1992 .name = "Grand X-Guard / Trust 814PCI",
1993 .video_inputs = 16,
1994 /* .audio_inputs= 0, */
1995 .svhs = NO_SVHS,
1996 .tuner_type = TUNER_ABSENT,
1997 .tuner_addr = ADDR_UNSET,
1998 .gpiomask2 = 0xff,
1999 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
2000 .muxsel_hook = xguard_muxsel,
2001 .no_msp34xx = 1,
2002 .no_tda7432 = 1,
2003 .pll = PLL_28,
2004 },
2005
2006 /* ---- card 0x68 ---------------------------------- */
2007 [BTTV_BOARD_NEBULA_DIGITV] = {
2008 .name = "Nebula Electronics DigiTV",
2009 .video_inputs = 1,
2010 .svhs = NO_SVHS,
2011 .muxsel = MUXSEL(2, 3, 1, 0),
2012 .no_msp34xx = 1,
2013 .no_tda7432 = 1,
2014 .pll = PLL_28,
2015 .tuner_type = TUNER_ABSENT,
2016 .tuner_addr = ADDR_UNSET,
2017 .has_dvb = 1,
2018 .has_remote = 1,
2019 .gpiomask = 0x1b,
2020 .no_gpioirq = 1,
2021 },
2022 [BTTV_BOARD_PV143] = {
2023 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2024 .name = "ProVideo PV143",
2025 .video_inputs = 4,
2026 /* .audio_inputs= 0, */
2027 .svhs = NO_SVHS,
2028 .gpiomask = 0,
2029 .muxsel = MUXSEL(2, 3, 1, 0),
2030 .gpiomux = { 0 },
2031 .needs_tvaudio = 0,
2032 .no_msp34xx = 1,
2033 .pll = PLL_28,
2034 .tuner_type = TUNER_ABSENT,
2035 .tuner_addr = ADDR_UNSET,
2036 },
2037 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
2038 /* M.Klahr@phytec.de */
2039 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
2040 .video_inputs = 4,
2041 /* .audio_inputs= 0, */
2042 .svhs = 3,
2043 .gpiomask = 0x00,
2044 .muxsel = MUXSEL(2, 3, 1, 0),
2045 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2046 .needs_tvaudio = 0,
2047 .pll = PLL_28,
2048 .tuner_type = TUNER_ABSENT,
2049 .tuner_addr = ADDR_UNSET,
2050 },
2051 [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2052 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2053 .video_inputs = 4,
2054 /* .audio_inputs= 0, */
2055 .svhs = 3,
2056 .gpiomask = 0x00,
2057 .muxsel = MUXSEL(2, 3, 1, 1),
2058 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2059 .needs_tvaudio = 0,
2060 .pll = PLL_28,
2061 .tuner_type = TUNER_ABSENT,
2062 .tuner_addr = ADDR_UNSET,
2063 },
2064
2065 /* ---- card 0x6c ---------------------------------- */
2066 [BTTV_BOARD_VD009_MINIDIN] = {
2067 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2068 .video_inputs = 10,
2069 /* .audio_inputs= 0, */
2070 .svhs = 9,
2071 .gpiomask = 0x00,
2072 .gpiomask2 = 0x03, /* used for external vodeo mux */
2073 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2074 .muxsel_hook = phytec_muxsel,
2075 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2076 .needs_tvaudio = 1,
2077 .pll = PLL_28,
2078 .tuner_type = TUNER_ABSENT,
2079 .tuner_addr = ADDR_UNSET,
2080 },
2081 [BTTV_BOARD_VD009_COMBI] = {
2082 .name = "PHYTEC VD-009 Combi (bt878)",
2083 .video_inputs = 10,
2084 /* .audio_inputs= 0, */
2085 .svhs = 9,
2086 .gpiomask = 0x00,
2087 .gpiomask2 = 0x03, /* used for external vodeo mux */
2088 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2089 .muxsel_hook = phytec_muxsel,
2090 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2091 .needs_tvaudio = 1,
2092 .pll = PLL_28,
2093 .tuner_type = TUNER_ABSENT,
2094 .tuner_addr = ADDR_UNSET,
2095 },
2096 [BTTV_BOARD_IVC100] = {
2097 .name = "IVC-100",
2098 .video_inputs = 4,
2099 /* .audio_inputs= 0, */
2100 .tuner_type = TUNER_ABSENT,
2101 .tuner_addr = ADDR_UNSET,
2102 .svhs = NO_SVHS,
2103 .gpiomask = 0xdf,
2104 .muxsel = MUXSEL(2, 3, 1, 0),
2105 .pll = PLL_28,
2106 },
2107 [BTTV_BOARD_IVC120] = {
2108 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2109 .name = "IVC-120G",
2110 .video_inputs = 16,
2111 /* .audio_inputs= 0, */
2112 .tuner_type = TUNER_ABSENT,
2113 .tuner_addr = ADDR_UNSET,
2114 .svhs = NO_SVHS, /* card has no svhs */
2115 .needs_tvaudio = 0,
2116 .no_msp34xx = 1,
2117 .no_tda7432 = 1,
2118 .gpiomask = 0x00,
2119 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2120 .muxsel_hook = ivc120_muxsel,
2121 .pll = PLL_28,
2122 },
2123
2124 /* ---- card 0x70 ---------------------------------- */
2125 [BTTV_BOARD_PC_HDTV] = {
2126 .name = "pcHDTV HD-2000 TV",
2127 .video_inputs = 4,
2128 /* .audio_inputs= 1, */
2129 .svhs = 2,
2130 .muxsel = MUXSEL(2, 3, 1, 0),
2131 .tuner_type = TUNER_PHILIPS_FCV1236D,
2132 .tuner_addr = ADDR_UNSET,
2133 .has_dvb = 1,
2134 },
2135 [BTTV_BOARD_TWINHAN_DST] = {
2136 .name = "Twinhan DST + clones",
2137 .no_msp34xx = 1,
2138 .no_tda7432 = 1,
2139 .tuner_type = TUNER_ABSENT,
2140 .tuner_addr = ADDR_UNSET,
2141 .no_video = 1,
2142 .has_dvb = 1,
2143 },
2144 [BTTV_BOARD_WINFASTVC100] = {
2145 .name = "Winfast VC100",
2146 .video_inputs = 3,
2147 /* .audio_inputs= 0, */
2148 .svhs = 1,
2149 /* Vid In, SVid In, Vid over SVid in connector */
2150 .muxsel = MUXSEL(3, 1, 1, 3),
2151 .no_msp34xx = 1,
2152 .no_tda7432 = 1,
2153 .tuner_type = TUNER_ABSENT,
2154 .tuner_addr = ADDR_UNSET,
2155 .pll = PLL_28,
2156 },
2157 [BTTV_BOARD_TEV560] = {
2158 .name = "Teppro TEV-560/InterVision IV-560",
2159 .video_inputs = 3,
2160 /* .audio_inputs= 1, */
2161 .svhs = 2,
2162 .gpiomask = 3,
2163 .muxsel = MUXSEL(2, 3, 1, 1),
2164 .gpiomux = { 1, 1, 1, 1 },
2165 .needs_tvaudio = 1,
2166 .tuner_type = TUNER_PHILIPS_PAL,
2167 .tuner_addr = ADDR_UNSET,
2168 .pll = PLL_35,
2169 },
2170
2171 /* ---- card 0x74 ---------------------------------- */
2172 [BTTV_BOARD_SIMUS_GVC1100] = {
2173 .name = "SIMUS GVC1100",
2174 .video_inputs = 4,
2175 /* .audio_inputs= 0, */
2176 .svhs = NO_SVHS,
2177 .tuner_type = TUNER_ABSENT,
2178 .tuner_addr = ADDR_UNSET,
2179 .pll = PLL_28,
2180 .muxsel = MUXSEL(2, 2, 2, 2),
2181 .gpiomask = 0x3F,
2182 .muxsel_hook = gvc1100_muxsel,
2183 },
2184 [BTTV_BOARD_NGSTV_PLUS] = {
2185 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2186 .name = "NGS NGSTV+",
2187 .video_inputs = 3,
2188 .svhs = 2,
2189 .gpiomask = 0x008007,
2190 .muxsel = MUXSEL(2, 3, 0, 0),
2191 .gpiomux = { 0, 0, 0, 0 },
2192 .gpiomute = 0x000003,
2193 .pll = PLL_28,
2194 .tuner_type = TUNER_PHILIPS_PAL,
2195 .tuner_addr = ADDR_UNSET,
2196 .has_remote = 1,
2197 },
2198 [BTTV_BOARD_LMLBT4] = {
2199 /* http://linuxmedialabs.com */
2200 .name = "LMLBT4",
2201 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2202 /* .audio_inputs= 0, */
2203 .svhs = NO_SVHS,
2204 .muxsel = MUXSEL(2, 3, 1, 0),
2205 .no_msp34xx = 1,
2206 .no_tda7432 = 1,
2207 .needs_tvaudio = 0,
2208 .tuner_type = TUNER_ABSENT,
2209 .tuner_addr = ADDR_UNSET,
2210 },
2211 [BTTV_BOARD_TEKRAM_M205] = {
2212 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2213 .name = "Tekram M205 PRO",
2214 .video_inputs = 3,
2215 /* .audio_inputs= 1, */
2216 .tuner_type = TUNER_PHILIPS_PAL,
2217 .tuner_addr = ADDR_UNSET,
2218 .svhs = 2,
2219 .needs_tvaudio = 0,
2220 .gpiomask = 0x68,
2221 .muxsel = MUXSEL(2, 3, 1),
2222 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2223 .pll = PLL_28,
2224 },
2225
2226 /* ---- card 0x78 ---------------------------------- */
2227 [BTTV_BOARD_CONTVFMI] = {
2228 /* Javier Cendan Ares <jcendan@lycos.es> */
2229 /* bt878 TV + FM without subsystem ID */
2230 .name = "Conceptronic CONTVFMi",
2231 .video_inputs = 3,
2232 /* .audio_inputs= 1, */
2233 .svhs = 2,
2234 .gpiomask = 0x008007,
2235 .muxsel = MUXSEL(2, 3, 1, 1),
2236 .gpiomux = { 0, 1, 2, 2 },
2237 .gpiomute = 3,
2238 .needs_tvaudio = 0,
2239 .pll = PLL_28,
2240 .tuner_type = TUNER_PHILIPS_PAL,
2241 .tuner_addr = ADDR_UNSET,
2242 .has_remote = 1,
2243 .has_radio = 1,
2244 },
2245 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2246 /*Eric DEBIEF <debief@telemsa.com>*/
2247 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2248 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2249 /*0x79 in bttv.h*/
2250 .name = "Euresys Picolo Tetra",
2251 .video_inputs = 4,
2252 /* .audio_inputs= 0, */
2253 .svhs = NO_SVHS,
2254 .gpiomask = 0,
2255 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2256 .no_msp34xx = 1,
2257 .no_tda7432 = 1,
2258 /*878A input is always MUX0, see above.*/
2259 .muxsel = MUXSEL(2, 2, 2, 2),
2260 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2261 .pll = PLL_28,
2262 .needs_tvaudio = 0,
2263 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2264 .tuner_type = TUNER_ABSENT,
2265 .tuner_addr = ADDR_UNSET,
2266 },
2267 [BTTV_BOARD_SPIRIT_TV] = {
2268 /* Spirit TV Tuner from http://spiritmodems.com.au */
2269 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2270 .name = "Spirit TV Tuner",
2271 .video_inputs = 3,
2272 /* .audio_inputs= 1, */
2273 .svhs = 2,
2274 .gpiomask = 0x0000000f,
2275 .muxsel = MUXSEL(2, 1, 1),
2276 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2277 .tuner_type = TUNER_TEMIC_PAL,
2278 .tuner_addr = ADDR_UNSET,
2279 .no_msp34xx = 1,
2280 },
2281 [BTTV_BOARD_AVDVBT_771] = {
2282 /* Wolfram Joost <wojo@frokaschwei.de> */
2283 .name = "AVerMedia AVerTV DVB-T 771",
2284 .video_inputs = 2,
2285 .svhs = 1,
2286 .tuner_type = TUNER_ABSENT,
2287 .tuner_addr = ADDR_UNSET,
2288 .muxsel = MUXSEL(3, 3),
2289 .no_msp34xx = 1,
2290 .no_tda7432 = 1,
2291 .pll = PLL_28,
2292 .has_dvb = 1,
2293 .no_gpioirq = 1,
2294 .has_remote = 1,
2295 },
2296 /* ---- card 0x7c ---------------------------------- */
2297 [BTTV_BOARD_AVDVBT_761] = {
2298 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2299 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2300 .name = "AverMedia AverTV DVB-T 761",
2301 .video_inputs = 2,
2302 .svhs = 1,
2303 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2304 .no_msp34xx = 1,
2305 .no_tda7432 = 1,
2306 .pll = PLL_28,
2307 .tuner_type = TUNER_ABSENT,
2308 .tuner_addr = ADDR_UNSET,
2309 .has_dvb = 1,
2310 .no_gpioirq = 1,
2311 .has_remote = 1,
2312 },
2313 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2314 /* andre.schwarz@matrix-vision.de */
2315 .name = "MATRIX Vision Sigma-SQ",
2316 .video_inputs = 16,
2317 /* .audio_inputs= 0, */
2318 .svhs = NO_SVHS,
2319 .gpiomask = 0x0,
2320 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2321 .muxsel_hook = sigmaSQ_muxsel,
2322 .gpiomux = { 0 },
2323 .no_msp34xx = 1,
2324 .pll = PLL_28,
2325 .tuner_type = TUNER_ABSENT,
2326 .tuner_addr = ADDR_UNSET,
2327 },
2328 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2329 /* andre.schwarz@matrix-vision.de */
2330 .name = "MATRIX Vision Sigma-SLC",
2331 .video_inputs = 4,
2332 /* .audio_inputs= 0, */
2333 .svhs = NO_SVHS,
2334 .gpiomask = 0x0,
2335 .muxsel = MUXSEL(2, 2, 2, 2),
2336 .muxsel_hook = sigmaSLC_muxsel,
2337 .gpiomux = { 0 },
2338 .no_msp34xx = 1,
2339 .pll = PLL_28,
2340 .tuner_type = TUNER_ABSENT,
2341 .tuner_addr = ADDR_UNSET,
2342 },
2343 /* BTTV_BOARD_APAC_VIEWCOMP */
2344 [BTTV_BOARD_APAC_VIEWCOMP] = {
2345 /* Attila Kondoros <attila.kondoros@chello.hu> */
2346 /* bt878 TV + FM 0x00000000 subsystem ID */
2347 .name = "APAC Viewcomp 878(AMAX)",
2348 .video_inputs = 2,
2349 /* .audio_inputs= 1, */
2350 .svhs = NO_SVHS,
2351 .gpiomask = 0xFF,
2352 .muxsel = MUXSEL(2, 3, 1, 1),
2353 .gpiomux = { 2, 0, 0, 0 },
2354 .gpiomute = 10,
2355 .needs_tvaudio = 0,
2356 .pll = PLL_28,
2357 .tuner_type = TUNER_PHILIPS_PAL,
2358 .tuner_addr = ADDR_UNSET,
2359 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2360 .has_radio = 1, /* not every card has radio */
2361 },
2362
2363 /* ---- card 0x80 ---------------------------------- */
2364 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2365 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2366 .name = "DViCO FusionHDTV DVB-T Lite",
2367 .no_msp34xx = 1,
2368 .no_tda7432 = 1,
2369 .pll = PLL_28,
2370 .no_video = 1,
2371 .has_dvb = 1,
2372 .tuner_type = TUNER_ABSENT,
2373 .tuner_addr = ADDR_UNSET,
2374 },
2375 [BTTV_BOARD_VGEAR_MYVCD] = {
2376 /* Steven <photon38@pchome.com.tw> */
2377 .name = "V-Gear MyVCD",
2378 .video_inputs = 3,
2379 /* .audio_inputs= 1, */
2380 .svhs = 2,
2381 .gpiomask = 0x3f,
2382 .muxsel = MUXSEL(2, 3, 1, 0),
2383 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2384 .gpiomute = 0x31,
2385 .no_msp34xx = 1,
2386 .pll = PLL_28,
2387 .tuner_type = TUNER_PHILIPS_NTSC_M,
2388 .tuner_addr = ADDR_UNSET,
2389 .has_radio = 0,
2390 },
2391 [BTTV_BOARD_SUPER_TV] = {
2392 /* Rick C <cryptdragoon@gmail.com> */
2393 .name = "Super TV Tuner",
2394 .video_inputs = 4,
2395 /* .audio_inputs= 1, */
2396 .svhs = 2,
2397 .muxsel = MUXSEL(2, 3, 1, 0),
2398 .tuner_type = TUNER_PHILIPS_NTSC,
2399 .tuner_addr = ADDR_UNSET,
2400 .gpiomask = 0x008007,
2401 .gpiomux = { 0, 0x000001,0,0 },
2402 .needs_tvaudio = 1,
2403 .has_radio = 1,
2404 },
2405 [BTTV_BOARD_TIBET_CS16] = {
2406 /* Chris Fanning <video4linux@haydon.net> */
2407 .name = "Tibet Systems 'Progress DVR' CS16",
2408 .video_inputs = 16,
2409 /* .audio_inputs= 0, */
2410 .svhs = NO_SVHS,
2411 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2412 .pll = PLL_28,
2413 .no_msp34xx = 1,
2414 .no_tda7432 = 1,
2415 .tuner_type = TUNER_ABSENT,
2416 .tuner_addr = ADDR_UNSET,
2417 .muxsel_hook = tibetCS16_muxsel,
2418 },
2419 [BTTV_BOARD_KODICOM_4400R] = {
2420 /* Bill Brack <wbrack@mmm.com.hk> */
2421 /*
2422 * Note that, because of the card's wiring, the "master"
2423 * BT878A chip (i.e. the one which controls the analog switch
2424 * and must use this card type) is the 2nd one detected. The
2425 * other 3 chips should use card type 0x85, whose description
2426 * follows this one. There is a EEPROM on the card (which is
2427 * connected to the I2C of one of those other chips), but is
2428 * not currently handled. There is also a facility for a
2429 * "monitor", which is also not currently implemented.
2430 */
2431 .name = "Kodicom 4400R (master)",
2432 .video_inputs = 16,
2433 /* .audio_inputs= 0, */
2434 .tuner_type = TUNER_ABSENT,
2435 .tuner_addr = ADDR_UNSET,
2436 .svhs = NO_SVHS,
2437 /* GPIO bits 0-9 used for analog switch:
2438 * 00 - 03: camera selector
2439 * 04 - 06: channel (controller) selector
2440 * 07: data (1->on, 0->off)
2441 * 08: strobe
2442 * 09: reset
2443 * bit 16 is input from sync separator for the channel
2444 */
2445 .gpiomask = 0x0003ff,
2446 .no_gpioirq = 1,
2447 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2448 .pll = PLL_28,
2449 .no_msp34xx = 1,
2450 .no_tda7432 = 1,
2451 .muxsel_hook = kodicom4400r_muxsel,
2452 },
2453 [BTTV_BOARD_KODICOM_4400R_SL] = {
2454 /* Bill Brack <wbrack@mmm.com.hk> */
2455 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2456 * one which controls the analog switch, and must use the card type)
2457 * is the 2nd one detected. The other 3 chips should use this card
2458 * type
2459 */
2460 .name = "Kodicom 4400R (slave)",
2461 .video_inputs = 16,
2462 /* .audio_inputs= 0, */
2463 .tuner_type = TUNER_ABSENT,
2464 .tuner_addr = ADDR_UNSET,
2465 .svhs = NO_SVHS,
2466 .gpiomask = 0x010000,
2467 .no_gpioirq = 1,
2468 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2469 .pll = PLL_28,
2470 .no_msp34xx = 1,
2471 .no_tda7432 = 1,
2472 .muxsel_hook = kodicom4400r_muxsel,
2473 },
2474 /* ---- card 0x86---------------------------------- */
2475 [BTTV_BOARD_ADLINK_RTV24] = {
2476 /* Michael Henson <mhenson@clarityvi.com> */
2477 /* Adlink RTV24 with special unlock codes */
2478 .name = "Adlink RTV24",
2479 .video_inputs = 4,
2480 /* .audio_inputs= 1, */
2481 .svhs = 2,
2482 .muxsel = MUXSEL(2, 3, 1, 0),
2483 .tuner_type = UNSET,
2484 .tuner_addr = ADDR_UNSET,
2485 .pll = PLL_28,
2486 },
2487 /* ---- card 0x87---------------------------------- */
2488 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2489 /* Michael Krufky <mkrufky@m1k.net> */
2490 .name = "DViCO FusionHDTV 5 Lite",
2491 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2492 .tuner_addr = ADDR_UNSET,
2493 .video_inputs = 3,
2494 /* .audio_inputs= 1, */
2495 .svhs = 2,
2496 .muxsel = MUXSEL(2, 3, 1),
2497 .gpiomask = 0x00e00007,
2498 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2499 .gpiomute = 0x00c00007,
2500 .no_msp34xx = 1,
2501 .no_tda7432 = 1,
2502 .has_dvb = 1,
2503 },
2504 /* ---- card 0x88---------------------------------- */
2505 [BTTV_BOARD_ACORP_Y878F] = {
2506 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2507 .name = "Acorp Y878F",
2508 .video_inputs = 3,
2509 /* .audio_inputs= 1, */
2510 .svhs = 2,
2511 .gpiomask = 0x01fe00,
2512 .muxsel = MUXSEL(2, 3, 1, 1),
2513 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2514 .gpiomute = 0x002000,
2515 .needs_tvaudio = 1,
2516 .pll = PLL_28,
2517 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2518 .tuner_addr = 0xc1 >>1,
2519 .has_radio = 1,
2520 },
2521 /* ---- card 0x89 ---------------------------------- */
2522 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2523 .name = "Conceptronic CTVFMi v2",
2524 .video_inputs = 3,
2525 /* .audio_inputs= 1, */
2526 .svhs = 2,
2527 .gpiomask = 0x001c0007,
2528 .muxsel = MUXSEL(2, 3, 1, 1),
2529 .gpiomux = { 0, 1, 2, 2 },
2530 .gpiomute = 3,
2531 .needs_tvaudio = 0,
2532 .pll = PLL_28,
2533 .tuner_type = TUNER_TENA_9533_DI,
2534 .tuner_addr = ADDR_UNSET,
2535 .has_remote = 1,
2536 .has_radio = 1,
2537 },
2538 /* ---- card 0x8a ---------------------------------- */
2539 [BTTV_BOARD_PV_BT878P_2E] = {
2540 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2541 .video_inputs = 5,
2542 /* .audio_inputs= 1, */
2543 .svhs = 3,
2544 .has_dig_in = 1,
2545 .gpiomask = 0x01fe00,
2546 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2547 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2548 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2549 .gpiomute = 0x12400,
2550 .no_msp34xx = 1,
2551 .pll = PLL_28,
2552 .tuner_type = TUNER_LG_PAL_FM,
2553 .tuner_addr = ADDR_UNSET,
2554 .has_remote = 1,
2555 },
2556 /* ---- card 0x8b ---------------------------------- */
2557 [BTTV_BOARD_PV_M4900] = {
2558 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2559 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2560 .video_inputs = 3,
2561 /* .audio_inputs= 1, */
2562 .svhs = 2,
2563 .gpiomask = 0x3f,
2564 .muxsel = MUXSEL(2, 3, 1, 1),
2565 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2566 .gpiomute = 0x29,
2567 .no_msp34xx = 1,
2568 .pll = PLL_28,
2569 .tuner_type = TUNER_YMEC_TVF_5533MF,
2570 .tuner_addr = ADDR_UNSET,
2571 .has_radio = 1,
2572 .has_remote = 1,
2573 },
2574 /* ---- card 0x8c ---------------------------------- */
2575 /* Has four Bt878 chips behind a PCI bridge, each chip has:
2576 one external BNC composite input (mux 2)
2577 three internal composite inputs (unknown muxes)
2578 an 18-bit stereo A/D (CS5331A), which has:
2579 one external stereo unblanced (RCA) audio connection
2580 one (or 3?) internal stereo balanced (XLR) audio connection
2581 input is selected via gpio to a 14052B mux
2582 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2583 gain is controlled via an X9221A chip on the I2C bus @0x28
2584 sample rate is controlled via gpio to an MK1413S
2585 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2586 There is neither a tuner nor an svideo input. */
2587 [BTTV_BOARD_OSPREY440] = {
2588 .name = "Osprey 440",
2589 .video_inputs = 4,
2590 /* .audio_inputs= 2, */
2591 .svhs = NO_SVHS,
2592 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2593 .gpiomask = 0x303,
2594 .gpiomute = 0x000, /* int + 32kHz */
2595 .gpiomux = { 0, 0, 0x000, 0x100},
2596 .pll = PLL_28,
2597 .tuner_type = TUNER_ABSENT,
2598 .tuner_addr = ADDR_UNSET,
2599 .no_msp34xx = 1,
2600 .no_tda7432 = 1,
2601 },
2602 /* ---- card 0x8d ---------------------------------- */
2603 [BTTV_BOARD_ASOUND_SKYEYE] = {
2604 .name = "Asound Skyeye PCTV",
2605 .video_inputs = 3,
2606 /* .audio_inputs= 1, */
2607 .svhs = 2,
2608 .gpiomask = 15,
2609 .muxsel = MUXSEL(2, 3, 1, 1),
2610 .gpiomux = { 2, 0, 0, 0 },
2611 .gpiomute = 1,
2612 .needs_tvaudio = 1,
2613 .pll = PLL_28,
2614 .tuner_type = TUNER_PHILIPS_NTSC,
2615 .tuner_addr = ADDR_UNSET,
2616 },
2617 /* ---- card 0x8e ---------------------------------- */
2618 [BTTV_BOARD_SABRENT_TVFM] = {
2619 .name = "Sabrent TV-FM (bttv version)",
2620 .video_inputs = 3,
2621 /* .audio_inputs= 1, */
2622 .svhs = 2,
2623 .gpiomask = 0x108007,
2624 .muxsel = MUXSEL(2, 3, 1, 1),
2625 .gpiomux = { 100000, 100002, 100002, 100000 },
2626 .no_msp34xx = 1,
2627 .no_tda7432 = 1,
2628 .pll = PLL_28,
2629 .tuner_type = TUNER_TNF_5335MF,
2630 .tuner_addr = ADDR_UNSET,
2631 .has_radio = 1,
2632 },
2633 /* ---- card 0x8f ---------------------------------- */
2634 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2635 .name = "Hauppauge ImpactVCB (bt878)",
2636 .video_inputs = 4,
2637 /* .audio_inputs= 0, */
2638 .svhs = NO_SVHS,
2639 .gpiomask = 0x0f, /* old: 7 */
2640 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2641 .no_msp34xx = 1,
2642 .no_tda7432 = 1,
2643 .tuner_type = TUNER_ABSENT,
2644 .tuner_addr = ADDR_UNSET,
2645 },
2646 [BTTV_BOARD_MACHTV_MAGICTV] = {
2647 /* Julian Calaby <julian.calaby@gmail.com>
2648 * Slightly different from original MachTV definition (0x60)
2649
2650 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2651 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2652 * properly (methinks) causing no keyup bits being set */
2653
2654 .name = "MagicTV", /* rebranded MachTV */
2655 .video_inputs = 3,
2656 /* .audio_inputs= 1, */
2657 .svhs = 2,
2658 .gpiomask = 7,
2659 .muxsel = MUXSEL(2, 3, 1, 1),
2660 .gpiomux = { 0, 1, 2, 3 },
2661 .gpiomute = 4,
2662 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2663 .tuner_addr = ADDR_UNSET,
2664 .pll = PLL_28,
2665 .has_radio = 1,
2666 .has_remote = 1,
2667 },
2668 [BTTV_BOARD_SSAI_SECURITY] = {
2669 .name = "SSAI Security Video Interface",
2670 .video_inputs = 4,
2671 /* .audio_inputs= 0, */
2672 .svhs = NO_SVHS,
2673 .muxsel = MUXSEL(0, 1, 2, 3),
2674 .tuner_type = TUNER_ABSENT,
2675 .tuner_addr = ADDR_UNSET,
2676 },
2677 [BTTV_BOARD_SSAI_ULTRASOUND] = {
2678 .name = "SSAI Ultrasound Video Interface",
2679 .video_inputs = 2,
2680 /* .audio_inputs= 0, */
2681 .svhs = 1,
2682 .muxsel = MUXSEL(2, 0, 1, 3),
2683 .tuner_type = TUNER_ABSENT,
2684 .tuner_addr = ADDR_UNSET,
2685 },
2686 /* ---- card 0x94---------------------------------- */
2687 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2688 .name = "DViCO FusionHDTV 2",
2689 .tuner_type = TUNER_PHILIPS_FCV1236D,
2690 .tuner_addr = ADDR_UNSET,
2691 .video_inputs = 3,
2692 /* .audio_inputs= 1, */
2693 .svhs = 2,
2694 .muxsel = MUXSEL(2, 3, 1),
2695 .gpiomask = 0x00e00007,
2696 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2697 .gpiomute = 0x00c00007,
2698 .no_msp34xx = 1,
2699 .no_tda7432 = 1,
2700 },
2701 /* ---- card 0x95---------------------------------- */
2702 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2703 .name = "Typhoon TV-Tuner PCI (50684)",
2704 .video_inputs = 3,
2705 /* .audio_inputs= 1, */
2706 .svhs = 2,
2707 .gpiomask = 0x3014f,
2708 .muxsel = MUXSEL(2, 3, 1, 1),
2709 .gpiomux = { 0x20001,0x10001, 0, 0 },
2710 .gpiomute = 10,
2711 .needs_tvaudio = 1,
2712 .pll = PLL_28,
2713 .tuner_type = TUNER_PHILIPS_PAL_I,
2714 .tuner_addr = ADDR_UNSET,
2715 },
2716 [BTTV_BOARD_GEOVISION_GV600] = {
2717 /* emhn@usb.ve */
2718 .name = "Geovision GV-600",
2719 .video_inputs = 16,
2720 /* .audio_inputs= 0, */
2721 .svhs = NO_SVHS,
2722 .gpiomask = 0x0,
2723 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2724 .muxsel_hook = geovision_muxsel,
2725 .gpiomux = { 0 },
2726 .no_msp34xx = 1,
2727 .pll = PLL_28,
2728 .tuner_type = TUNER_ABSENT,
2729 .tuner_addr = ADDR_UNSET,
2730 },
2731 [BTTV_BOARD_KOZUMI_KTV_01C] = {
2732 /* Mauro Lacy <mauro@lacy.com.ar>
2733 * Based on MagicTV and Conceptronic CONTVFMi */
2734
2735 .name = "Kozumi KTV-01C",
2736 .video_inputs = 3,
2737 /* .audio_inputs= 1, */
2738 .svhs = 2,
2739 .gpiomask = 0x008007,
2740 .muxsel = MUXSEL(2, 3, 1, 1),
2741 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
2742 .gpiomute = 3, /* CONTVFMi */
2743 .needs_tvaudio = 0,
2744 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2745 .tuner_addr = ADDR_UNSET,
2746 .pll = PLL_28,
2747 .has_radio = 1,
2748 .has_remote = 1,
2749 },
2750 [BTTV_BOARD_ENLTV_FM_2] = {
2751 /* Encore TV Tuner Pro ENL TV-FM-2
2752 Mauro Carvalho Chehab <mchehab@infradead.org */
2753 .name = "Encore ENL TV-FM-2",
2754 .video_inputs = 3,
2755 /* .audio_inputs= 1, */
2756 .svhs = 2,
2757 /* bit 6 -> IR disabled
2758 bit 18/17 = 00 -> mute
2759 01 -> enable external audio input
2760 10 -> internal audio input (mono?)
2761 11 -> internal audio input
2762 */
2763 .gpiomask = 0x060040,
2764 .muxsel = MUXSEL(2, 3, 3),
2765 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
2766 .gpiomute = 0,
2767 .tuner_type = TUNER_TCL_MF02GIP_5N,
2768 .tuner_addr = ADDR_UNSET,
2769 .pll = PLL_28,
2770 .has_radio = 1,
2771 .has_remote = 1,
2772 },
2773 [BTTV_BOARD_VD012] = {
2774 /* D.Heer@Phytec.de */
2775 .name = "PHYTEC VD-012 (bt878)",
2776 .video_inputs = 4,
2777 /* .audio_inputs= 0, */
2778 .svhs = NO_SVHS,
2779 .gpiomask = 0x00,
2780 .muxsel = MUXSEL(0, 2, 3, 1),
2781 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2782 .needs_tvaudio = 0,
2783 .pll = PLL_28,
2784 .tuner_type = TUNER_ABSENT,
2785 .tuner_addr = ADDR_UNSET,
2786 },
2787 [BTTV_BOARD_VD012_X1] = {
2788 /* D.Heer@Phytec.de */
2789 .name = "PHYTEC VD-012-X1 (bt878)",
2790 .video_inputs = 4,
2791 /* .audio_inputs= 0, */
2792 .svhs = 3,
2793 .gpiomask = 0x00,
2794 .muxsel = MUXSEL(2, 3, 1),
2795 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2796 .needs_tvaudio = 0,
2797 .pll = PLL_28,
2798 .tuner_type = TUNER_ABSENT,
2799 .tuner_addr = ADDR_UNSET,
2800 },
2801 [BTTV_BOARD_VD012_X2] = {
2802 /* D.Heer@Phytec.de */
2803 .name = "PHYTEC VD-012-X2 (bt878)",
2804 .video_inputs = 4,
2805 /* .audio_inputs= 0, */
2806 .svhs = 3,
2807 .gpiomask = 0x00,
2808 .muxsel = MUXSEL(3, 2, 1),
2809 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2810 .needs_tvaudio = 0,
2811 .pll = PLL_28,
2812 .tuner_type = TUNER_ABSENT,
2813 .tuner_addr = ADDR_UNSET,
2814 },
2815 [BTTV_BOARD_GEOVISION_GV800S] = {
2816 /* Bruno Christo <bchristo@inf.ufsm.br>
2817 *
2818 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2819 * 1 audio input per BT878A = 4 audio inputs
2820 * 4 video inputs per BT878A = 16 video inputs
2821 * This is the first BT878A chip of the GV-800(S). It's the
2822 * "master" chip and it controls the video inputs through an
2823 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2824 * slaves should use card type 0x9e (following this one).
2825 * There is a EEPROM on the card which is currently not handled.
2826 * The audio input is not working yet.
2827 */
2828 .name = "Geovision GV-800(S) (master)",
2829 .video_inputs = 4,
2830 /* .audio_inputs= 1, */
2831 .tuner_type = TUNER_ABSENT,
2832 .tuner_addr = ADDR_UNSET,
2833 .svhs = NO_SVHS,
2834 .gpiomask = 0xf107f,
2835 .no_gpioirq = 1,
2836 .muxsel = MUXSEL(2, 2, 2, 2),
2837 .pll = PLL_28,
2838 .no_msp34xx = 1,
2839 .no_tda7432 = 1,
2840 .muxsel_hook = gv800s_muxsel,
2841 },
2842 [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2843 /* Bruno Christo <bchristo@inf.ufsm.br>
2844 *
2845 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2846 * 1 audio input per BT878A = 4 audio inputs
2847 * 4 video inputs per BT878A = 16 video inputs
2848 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2849 * and should use this card type.
2850 * The audio input is not working yet.
2851 */
2852 .name = "Geovision GV-800(S) (slave)",
2853 .video_inputs = 4,
2854 /* .audio_inputs= 1, */
2855 .tuner_type = TUNER_ABSENT,
2856 .tuner_addr = ADDR_UNSET,
2857 .svhs = NO_SVHS,
2858 .gpiomask = 0x00,
2859 .no_gpioirq = 1,
2860 .muxsel = MUXSEL(2, 2, 2, 2),
2861 .pll = PLL_28,
2862 .no_msp34xx = 1,
2863 .no_tda7432 = 1,
2864 .muxsel_hook = gv800s_muxsel,
2865 },
2866 [BTTV_BOARD_PV183] = {
2867 .name = "ProVideo PV183", /* 0x9f */
2868 .video_inputs = 2,
2869 /* .audio_inputs= 0, */
2870 .svhs = NO_SVHS,
2871 .gpiomask = 0,
2872 .muxsel = MUXSEL(2, 3),
2873 .gpiomux = { 0 },
2874 .needs_tvaudio = 0,
2875 .no_msp34xx = 1,
2876 .pll = PLL_28,
2877 .tuner_type = TUNER_ABSENT,
2878 .tuner_addr = ADDR_UNSET,
2879 },
2880};
2881
2882static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2883
2884/* ----------------------------------------------------------------------- */
2885
2886static unsigned char eeprom_data[256];
2887
2888/*
2889 * identify card
2890 */
2891void __devinit bttv_idcard(struct bttv *btv)
2892{
2893 unsigned int gpiobits;
2894 int i,type;
2895
2896 /* read PCI subsystem ID */
2897 btv->cardid = btv->c.pci->subsystem_device << 16;
2898 btv->cardid |= btv->c.pci->subsystem_vendor;
2899
2900 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2901 /* look for the card */
2902 for (type = -1, i = 0; cards[i].id != 0; i++)
2903 if (cards[i].id == btv->cardid)
2904 type = i;
2905
2906 if (type != -1) {
2907 /* found it */
2908 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2909 "PCI subsystem ID is %04x:%04x\n",
2910 btv->c.nr,cards[type].name,cards[type].cardnr,
2911 btv->cardid & 0xffff,
2912 (btv->cardid >> 16) & 0xffff);
2913 btv->c.type = cards[type].cardnr;
2914 } else {
2915 /* 404 */
2916 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2917 btv->c.nr, btv->cardid & 0xffff,
2918 (btv->cardid >> 16) & 0xffff);
2919 printk(KERN_DEBUG "please mail id, board name and "
2920 "the correct card= insmod option to linux-media@vger.kernel.org\n");
2921 }
2922 }
2923
2924 /* let the user override the autodetected type */
2925 if (card[btv->c.nr] < bttv_num_tvcards)
2926 btv->c.type=card[btv->c.nr];
2927
2928 /* print which card config we are using */
2929 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2930 bttv_tvcards[btv->c.type].name, btv->c.type,
2931 card[btv->c.nr] < bttv_num_tvcards
2932 ? "insmod option" : "autodetected");
2933
2934 /* overwrite gpio stuff ?? */
2935 if (UNSET == audioall && UNSET == audiomux[0])
2936 return;
2937
2938 if (UNSET != audiomux[0]) {
2939 gpiobits = 0;
2940 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2941 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2942 gpiobits |= audiomux[i];
2943 }
2944 } else {
2945 gpiobits = audioall;
2946 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2947 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2948 }
2949 }
2950 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2951 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2952 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2953 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2954 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2955 }
2956 printk("\n");
2957}
2958
2959/*
2960 * (most) board specific initialisations goes here
2961 */
2962
2963/* Some Modular Technology cards have an eeprom, but no subsystem ID */
2964static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2965{
2966 int type = -1;
2967
2968 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2969 type = BTTV_BOARD_MODTEC_205;
2970 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2971 type = BTTV_BOARD_EURESYS_PICOLO;
2972 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2973 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2974
2975 if (-1 != type) {
2976 btv->c.type = type;
2977 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2978 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2979 }
2980}
2981
2982static void flyvideo_gpio(struct bttv *btv)
2983{
2984 int gpio, has_remote, has_radio, is_capture_only;
2985 int is_lr90, has_tda9820_tda9821;
2986 int tuner_type = UNSET, ttype;
2987
2988 gpio_inout(0xffffff, 0);
2989 udelay(8); /* without this we would see the 0x1800 mask */
2990 gpio = gpio_read();
2991 /* FIXME: must restore OUR_EN ??? */
2992
2993 /* all cards provide GPIO info, some have an additional eeprom
2994 * LR50: GPIO coding can be found lower right CP1 .. CP9
2995 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2996 * GPIO14-12: n.c.
2997 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2998
2999 * lowest 3 bytes are remote control codes (no handshake needed)
3000 * xxxFFF: No remote control chip soldered
3001 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3002 * Note: Some bits are Audio_Mask !
3003 */
3004 ttype = (gpio & 0x0f0000) >> 16;
3005 switch (ttype) {
3006 case 0x0:
3007 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
3008 break;
3009 case 0x2:
3010 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3011 break;
3012 case 0x4:
3013 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3014 break;
3015 case 0x6:
3016 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3017 break;
3018 case 0xC:
3019 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3020 break;
3021 default:
3022 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3023 break;
3024 }
3025
3026 has_remote = gpio & 0x800000;
3027 has_radio = gpio & 0x400000;
3028 /* unknown 0x200000;
3029 * unknown2 0x100000; */
3030 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
3031 has_tda9820_tda9821 = !(gpio & 0x004000);
3032 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3033 /*
3034 * gpio & 0x001000 output bit for audio routing */
3035
3036 if (is_capture_only)
3037 tuner_type = TUNER_ABSENT; /* No tuner present */
3038
3039 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3040 btv->c.nr, has_radio ? "yes" : "no ",
3041 has_remote ? "yes" : "no ", tuner_type, gpio);
3042 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3043 btv->c.nr, is_lr90 ? "yes" : "no ",
3044 has_tda9820_tda9821 ? "yes" : "no ",
3045 is_capture_only ? "yes" : "no ");
3046
3047 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3048 btv->tuner_type = tuner_type;
3049 btv->has_radio = has_radio;
3050
3051 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3052 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3053 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3054 if (has_tda9820_tda9821)
3055 btv->audio_mode_gpio = lt9415_audio;
3056 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3057}
3058
3059static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3060 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3061static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3062 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3063
3064static void miro_pinnacle_gpio(struct bttv *btv)
3065{
3066 int id,msp,gpio;
3067 char *info;
3068
3069 gpio_inout(0xffffff, 0);
3070 gpio = gpio_read();
3071 id = ((gpio>>10) & 63) -1;
3072 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3073 if (id < 32) {
3074 btv->tuner_type = miro_tunermap[id];
3075 if (0 == (gpio & 0x20)) {
3076 btv->has_radio = 1;
3077 if (!miro_fmtuner[id]) {
3078 btv->has_matchbox = 1;
3079 btv->mbox_we = (1<<6);
3080 btv->mbox_most = (1<<7);
3081 btv->mbox_clk = (1<<8);
3082 btv->mbox_data = (1<<9);
3083 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3084 }
3085 } else {
3086 btv->has_radio = 0;
3087 }
3088 if (-1 != msp) {
3089 if (btv->c.type == BTTV_BOARD_MIRO)
3090 btv->c.type = BTTV_BOARD_MIROPRO;
3091 if (btv->c.type == BTTV_BOARD_PINNACLE)
3092 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3093 }
3094 printk(KERN_INFO
3095 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3096 btv->c.nr, id+1, btv->tuner_type,
3097 !btv->has_radio ? "no" :
3098 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3099 (-1 == msp) ? "no" : "yes");
3100 } else {
3101 /* new cards with microtune tuner */
3102 id = 63 - id;
3103 btv->has_radio = 0;
3104 switch (id) {
3105 case 1:
3106 info = "PAL / mono";
3107 btv->tda9887_conf = TDA9887_INTERCARRIER;
3108 break;
3109 case 2:
3110 info = "PAL+SECAM / stereo";
3111 btv->has_radio = 1;
3112 btv->tda9887_conf = TDA9887_QSS;
3113 break;
3114 case 3:
3115 info = "NTSC / stereo";
3116 btv->has_radio = 1;
3117 btv->tda9887_conf = TDA9887_QSS;
3118 break;
3119 case 4:
3120 info = "PAL+SECAM / mono";
3121 btv->tda9887_conf = TDA9887_QSS;
3122 break;
3123 case 5:
3124 info = "NTSC / mono";
3125 btv->tda9887_conf = TDA9887_INTERCARRIER;
3126 break;
3127 case 6:
3128 info = "NTSC / stereo";
3129 btv->tda9887_conf = TDA9887_INTERCARRIER;
3130 break;
3131 case 7:
3132 info = "PAL / stereo";
3133 btv->tda9887_conf = TDA9887_INTERCARRIER;
3134 break;
3135 default:
3136 info = "oops: unknown card";
3137 break;
3138 }
3139 if (-1 != msp)
3140 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3141 printk(KERN_INFO
3142 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3143 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3144 btv->tuner_type = TUNER_MT2032;
3145 }
3146}
3147
3148/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3149#define LM1882_SYNC_DRIVE 0x200000L
3150
3151static void init_ids_eagle(struct bttv *btv)
3152{
3153 gpio_inout(0xffffff,0xFFFF37);
3154 gpio_write(0x200020);
3155
3156 /* flash strobe inverter ?! */
3157 gpio_write(0x200024);
3158
3159 /* switch sync drive off */
3160 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3161
3162 /* set BT848 muxel to 2 */
3163 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3164}
3165
3166/* Muxsel helper for the IDS Eagle.
3167 * the eagles does not use the standard muxsel-bits but
3168 * has its own multiplexer */
3169static void eagle_muxsel(struct bttv *btv, unsigned int input)
3170{
3171 gpio_bits(3, input & 3);
3172
3173 /* composite */
3174 /* set chroma ADC to sleep */
3175 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3176 /* set to composite video */
3177 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3178 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3179
3180 /* switch sync drive off */
3181 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3182}
3183
3184static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3185{
3186 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3187 gpio_write(masks[input%4]);
3188}
3189
3190/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3191 alarms output
3192
3193 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3194 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3195
3196 IN - sensor inputs, INx - sensor inputs and TI XORed together
3197 O1,O2,O3 - alarm outputs (relays)
3198
3199 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3200
3201*/
3202
3203static void init_lmlbt4x(struct bttv *btv)
3204{
3205 printk(KERN_DEBUG "LMLBT4x init\n");
3206 btwrite(0x000000, BT848_GPIO_REG_INP);
3207 gpio_inout(0xffffff, 0x0006C0);
3208 gpio_write(0x000000);
3209}
3210
3211static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3212{
3213 unsigned int inmux = input % 8;
3214 gpio_inout( 0xf, 0xf );
3215 gpio_bits( 0xf, inmux );
3216}
3217
3218static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3219{
3220 unsigned int inmux = input % 4;
3221 gpio_inout( 3<<9, 3<<9 );
3222 gpio_bits( 3<<9, inmux<<9 );
3223}
3224
3225static void geovision_muxsel(struct bttv *btv, unsigned int input)
3226{
3227 unsigned int inmux = input % 16;
3228 gpio_inout(0xf, 0xf);
3229 gpio_bits(0xf, inmux);
3230}
3231
3232/* ----------------------------------------------------------------------- */
3233
3234static void bttv_reset_audio(struct bttv *btv)
3235{
3236 /*
3237 * BT878A has a audio-reset register.
3238 * 1. This register is an audio reset function but it is in
3239 * function-0 (video capture) address space.
3240 * 2. It is enough to do this once per power-up of the card.
3241 * 3. There is a typo in the Conexant doc -- it is not at
3242 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3243 * --//Shrikumar 030609
3244 */
3245 if (btv->id != 878)
3246 return;
3247
3248 if (bttv_debug)
3249 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3250 btwrite((1<<7), 0x058);
3251 udelay(10);
3252 btwrite( 0, 0x058);
3253}
3254
3255/* initialization part one -- before registering i2c bus */
3256void __devinit bttv_init_card1(struct bttv *btv)
3257{
3258 switch (btv->c.type) {
3259 case BTTV_BOARD_HAUPPAUGE:
3260 case BTTV_BOARD_HAUPPAUGE878:
3261 boot_msp34xx(btv,5);
3262 break;
3263 case BTTV_BOARD_VOODOOTV_200:
3264 case BTTV_BOARD_VOODOOTV_FM:
3265 boot_msp34xx(btv,20);
3266 break;
3267 case BTTV_BOARD_AVERMEDIA98:
3268 boot_msp34xx(btv,11);
3269 break;
3270 case BTTV_BOARD_HAUPPAUGEPVR:
3271 pvr_boot(btv);
3272 break;
3273 case BTTV_BOARD_TWINHAN_DST:
3274 case BTTV_BOARD_AVDVBT_771:
3275 case BTTV_BOARD_PINNACLESAT:
3276 btv->use_i2c_hw = 1;
3277 break;
3278 case BTTV_BOARD_ADLINK_RTV24:
3279 init_RTV24( btv );
3280 break;
3281
3282 }
3283 if (!bttv_tvcards[btv->c.type].has_dvb)
3284 bttv_reset_audio(btv);
3285}
3286
3287/* initialization part two -- after registering i2c bus */
3288void __devinit bttv_init_card2(struct bttv *btv)
3289{
3290 btv->tuner_type = UNSET;
3291
3292 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3293 bttv_readee(btv,eeprom_data,0xa0);
3294 identify_by_eeprom(btv,eeprom_data);
3295 }
3296
3297 switch (btv->c.type) {
3298 case BTTV_BOARD_MIRO:
3299 case BTTV_BOARD_MIROPRO:
3300 case BTTV_BOARD_PINNACLE:
3301 case BTTV_BOARD_PINNACLEPRO:
3302 /* miro/pinnacle */
3303 miro_pinnacle_gpio(btv);
3304 break;
3305 case BTTV_BOARD_FLYVIDEO_98:
3306 case BTTV_BOARD_MAXI:
3307 case BTTV_BOARD_LIFE_FLYKIT:
3308 case BTTV_BOARD_FLYVIDEO:
3309 case BTTV_BOARD_TYPHOON_TVIEW:
3310 case BTTV_BOARD_CHRONOS_VS2:
3311 case BTTV_BOARD_FLYVIDEO_98FM:
3312 case BTTV_BOARD_FLYVIDEO2000:
3313 case BTTV_BOARD_FLYVIDEO98EZ:
3314 case BTTV_BOARD_CONFERENCETV:
3315 case BTTV_BOARD_LIFETEC_9415:
3316 flyvideo_gpio(btv);
3317 break;
3318 case BTTV_BOARD_HAUPPAUGE:
3319 case BTTV_BOARD_HAUPPAUGE878:
3320 case BTTV_BOARD_HAUPPAUGEPVR:
3321 /* pick up some config infos from the eeprom */
3322 bttv_readee(btv,eeprom_data,0xa0);
3323 hauppauge_eeprom(btv);
3324 break;
3325 case BTTV_BOARD_AVERMEDIA98:
3326 case BTTV_BOARD_AVPHONE98:
3327 bttv_readee(btv,eeprom_data,0xa0);
3328 avermedia_eeprom(btv);
3329 break;
3330 case BTTV_BOARD_PXC200:
3331 init_PXC200(btv);
3332 break;
3333 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3334 picolo_tetra_init(btv);
3335 break;
3336 case BTTV_BOARD_VHX:
3337 btv->has_radio = 1;
3338 btv->has_matchbox = 1;
3339 btv->mbox_we = 0x20;
3340 btv->mbox_most = 0;
3341 btv->mbox_clk = 0x08;
3342 btv->mbox_data = 0x10;
3343 btv->mbox_mask = 0x38;
3344 break;
3345 case BTTV_BOARD_VOBIS_BOOSTAR:
3346 case BTTV_BOARD_TERRATV:
3347 terratec_active_radio_upgrade(btv);
3348 break;
3349 case BTTV_BOARD_MAGICTVIEW061:
3350 if (btv->cardid == 0x3002144f) {
3351 btv->has_radio=1;
3352 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3353 }
3354 break;
3355 case BTTV_BOARD_STB2:
3356 if (btv->cardid == 0x3060121a) {
3357 /* Fix up entry for 3DFX VoodooTV 100,
3358 which is an OEM STB card variant. */
3359 btv->has_radio=0;
3360 btv->tuner_type=TUNER_TEMIC_NTSC;
3361 }
3362 break;
3363 case BTTV_BOARD_OSPREY1x0:
3364 case BTTV_BOARD_OSPREY1x0_848:
3365 case BTTV_BOARD_OSPREY101_848:
3366 case BTTV_BOARD_OSPREY1x1:
3367 case BTTV_BOARD_OSPREY1x1_SVID:
3368 case BTTV_BOARD_OSPREY2xx:
3369 case BTTV_BOARD_OSPREY2x0_SVID:
3370 case BTTV_BOARD_OSPREY2x0:
3371 case BTTV_BOARD_OSPREY440:
3372 case BTTV_BOARD_OSPREY500:
3373 case BTTV_BOARD_OSPREY540:
3374 case BTTV_BOARD_OSPREY2000:
3375 bttv_readee(btv,eeprom_data,0xa0);
3376 osprey_eeprom(btv, eeprom_data);
3377 break;
3378 case BTTV_BOARD_IDS_EAGLE:
3379 init_ids_eagle(btv);
3380 break;
3381 case BTTV_BOARD_MODTEC_205:
3382 bttv_readee(btv,eeprom_data,0xa0);
3383 modtec_eeprom(btv);
3384 break;
3385 case BTTV_BOARD_LMLBT4:
3386 init_lmlbt4x(btv);
3387 break;
3388 case BTTV_BOARD_TIBET_CS16:
3389 tibetCS16_init(btv);
3390 break;
3391 case BTTV_BOARD_KODICOM_4400R:
3392 kodicom4400r_init(btv);
3393 break;
3394 case BTTV_BOARD_GEOVISION_GV800S:
3395 gv800s_init(btv);
3396 break;
3397 }
3398
3399 /* pll configuration */
3400 if (!(btv->id==848 && btv->revision==0x11)) {
3401 /* defaults from card list */
3402 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3403 btv->pll.pll_ifreq=28636363;
3404 btv->pll.pll_crystal=BT848_IFORM_XT0;
3405 }
3406 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3407 btv->pll.pll_ifreq=35468950;
3408 btv->pll.pll_crystal=BT848_IFORM_XT1;
3409 }
3410 /* insmod options can override */
3411 switch (pll[btv->c.nr]) {
3412 case 0: /* none */
3413 btv->pll.pll_crystal = 0;
3414 btv->pll.pll_ifreq = 0;
3415 btv->pll.pll_ofreq = 0;
3416 break;
3417 case 1: /* 28 MHz */
3418 case 28:
3419 btv->pll.pll_ifreq = 28636363;
3420 btv->pll.pll_ofreq = 0;
3421 btv->pll.pll_crystal = BT848_IFORM_XT0;
3422 break;
3423 case 2: /* 35 MHz */
3424 case 35:
3425 btv->pll.pll_ifreq = 35468950;
3426 btv->pll.pll_ofreq = 0;
3427 btv->pll.pll_crystal = BT848_IFORM_XT1;
3428 break;
3429 }
3430 }
3431 btv->pll.pll_current = -1;
3432
3433 /* tuner configuration (from card list / autodetect / insmod option) */
3434 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3435 if (UNSET == btv->tuner_type)
3436 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3437 if (UNSET != tuner[btv->c.nr])
3438 btv->tuner_type = tuner[btv->c.nr];
3439
3440 if (btv->tuner_type == TUNER_ABSENT)
3441 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
3442 else if(btv->tuner_type == UNSET)
3443 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
3444 else
3445 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
3446 btv->tuner_type);
3447
3448 if (autoload != UNSET) {
3449 printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr);
3450 printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr);
3451 printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr);
3452 }
3453
3454 if (UNSET == btv->tuner_type)
3455 btv->tuner_type = TUNER_ABSENT;
3456
3457 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3458 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3459 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3460 UNSET : bttv_tvcards[btv->c.type].svhs;
3461 if (svhs[btv->c.nr] != UNSET)
3462 btv->svhs = svhs[btv->c.nr];
3463 if (remote[btv->c.nr] != UNSET)
3464 btv->has_remote = remote[btv->c.nr];
3465
3466 if (bttv_tvcards[btv->c.type].has_radio)
3467 btv->has_radio = 1;
3468 if (bttv_tvcards[btv->c.type].has_remote)
3469 btv->has_remote = 1;
3470 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3471 btv->gpioirq = 1;
3472 if (bttv_tvcards[btv->c.type].volume_gpio)
3473 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3474 if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3475 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3476
3477 if (btv->tuner_type == TUNER_ABSENT)
3478 return; /* no tuner or related drivers to load */
3479
3480 if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3481 /* Probe for RDS receiver chip */
3482 static const unsigned short addrs[] = {
3483 0x20 >> 1,
3484 0x22 >> 1,
3485 I2C_CLIENT_END
3486 };
3487 struct v4l2_subdev *sd;
3488
3489 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3490 &btv->c.i2c_adap, "saa6588", 0, addrs);
3491 btv->has_saa6588 = (sd != NULL);
3492 }
3493
3494 /* try to detect audio/fader chips */
3495
3496 /* First check if the user specified the audio chip via a module
3497 option. */
3498
3499 switch (audiodev[btv->c.nr]) {
3500 case -1:
3501 return; /* do not load any audio module */
3502
3503 case 0: /* autodetect */
3504 break;
3505
3506 case 1: {
3507 /* The user specified that we should probe for msp3400 */
3508 static const unsigned short addrs[] = {
3509 I2C_ADDR_MSP3400 >> 1,
3510 I2C_ADDR_MSP3400_ALT >> 1,
3511 I2C_CLIENT_END
3512 };
3513
3514 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3515 &btv->c.i2c_adap, "msp3400", 0, addrs);
3516 if (btv->sd_msp34xx)
3517 return;
3518 goto no_audio;
3519 }
3520
3521 case 2: {
3522 /* The user specified that we should probe for tda7432 */
3523 static const unsigned short addrs[] = {
3524 I2C_ADDR_TDA7432 >> 1,
3525 I2C_CLIENT_END
3526 };
3527
3528 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3529 &btv->c.i2c_adap, "tda7432", 0, addrs))
3530 return;
3531 goto no_audio;
3532 }
3533
3534 case 3: {
3535 /* The user specified that we should probe for tvaudio */
3536 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3537 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3538 if (btv->sd_tvaudio)
3539 return;
3540 goto no_audio;
3541 }
3542
3543 default:
3544 printk(KERN_WARNING "bttv%d: unknown audiodev value!\n",
3545 btv->c.nr);
3546 return;
3547 }
3548
3549 /* There were no overrides, so now we try to discover this through the
3550 card definition */
3551
3552 /* probe for msp3400 first: this driver can detect whether or not
3553 it really is a msp3400, so it will return NULL when the device
3554 found is really something else (e.g. a tea6300). */
3555 if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3556 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3557 &btv->c.i2c_adap, "msp3400",
3558 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3559 } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3560 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3561 &btv->c.i2c_adap, "msp3400",
3562 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3563 }
3564
3565 /* If we found a msp34xx, then we're done. */
3566 if (btv->sd_msp34xx)
3567 return;
3568
3569 /* it might also be a tda7432. */
3570 if (!bttv_tvcards[btv->c.type].no_tda7432) {
3571 static const unsigned short addrs[] = {
3572 I2C_ADDR_TDA7432 >> 1,
3573 I2C_CLIENT_END
3574 };
3575
3576 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3577 &btv->c.i2c_adap, "tda7432", 0, addrs))
3578 return;
3579 }
3580
3581 /* Now see if we can find one of the tvaudio devices. */
3582 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3583 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3584 if (btv->sd_tvaudio)
3585 return;
3586
3587no_audio:
3588 printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n",
3589 btv->c.nr);
3590}
3591
3592
3593/* initialize the tuner */
3594void __devinit bttv_init_tuner(struct bttv *btv)
3595{
3596 int addr = ADDR_UNSET;
3597
3598 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3599 addr = bttv_tvcards[btv->c.type].tuner_addr;
3600
3601 if (btv->tuner_type != TUNER_ABSENT) {
3602 struct tuner_setup tun_setup;
3603
3604 /* Load tuner module before issuing tuner config call! */
3605 if (bttv_tvcards[btv->c.type].has_radio)
3606 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3607 &btv->c.i2c_adap, "tuner",
3608 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3609 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3610 &btv->c.i2c_adap, "tuner",
3611 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3612 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3613 &btv->c.i2c_adap, "tuner",
3614 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3615
3616 tun_setup.mode_mask = T_ANALOG_TV;
3617 tun_setup.type = btv->tuner_type;
3618 tun_setup.addr = addr;
3619
3620 if (bttv_tvcards[btv->c.type].has_radio)
3621 tun_setup.mode_mask |= T_RADIO;
3622
3623 bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3624 }
3625
3626 if (btv->tda9887_conf) {
3627 struct v4l2_priv_tun_config tda9887_cfg;
3628
3629 tda9887_cfg.tuner = TUNER_TDA9887;
3630 tda9887_cfg.priv = &btv->tda9887_conf;
3631
3632 bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3633 }
3634}
3635
3636/* ----------------------------------------------------------------------- */
3637
3638static void modtec_eeprom(struct bttv *btv)
3639{
3640 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3641 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3642 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3643 btv->c.nr,&eeprom_data[0x1e]);
3644 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3645 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3646 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3647 btv->c.nr,&eeprom_data[0x1e]);
3648 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3649 btv->tuner_type=TUNER_PHILIPS_NTSC;
3650 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3651 btv->c.nr,&eeprom_data[0x1e]);
3652 } else {
3653 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3654 btv->c.nr,&eeprom_data[0x1e]);
3655 }
3656}
3657
3658static void __devinit hauppauge_eeprom(struct bttv *btv)
3659{
3660 struct tveeprom tv;
3661
3662 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3663 btv->tuner_type = tv.tuner_type;
3664 btv->has_radio = tv.has_radio;
3665
3666 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3667 btv->c.nr, tv.model);
3668
3669 /*
3670 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3671 * type based on model #.
3672 */
3673 if(tv.model == 64900) {
3674 printk("bttv%d: Switching board type from %s to %s\n",
3675 btv->c.nr,
3676 bttv_tvcards[btv->c.type].name,
3677 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3678 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3679 }
3680}
3681
3682static int terratec_active_radio_upgrade(struct bttv *btv)
3683{
3684 int freq;
3685
3686 btv->has_radio = 1;
3687 btv->has_matchbox = 1;
3688 btv->mbox_we = 0x10;
3689 btv->mbox_most = 0x20;
3690 btv->mbox_clk = 0x08;
3691 btv->mbox_data = 0x04;
3692 btv->mbox_mask = 0x3c;
3693
3694 btv->mbox_iow = 1 << 8;
3695 btv->mbox_ior = 1 << 9;
3696 btv->mbox_csel = 1 << 10;
3697
3698 freq=88000/62.5;
3699 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3700 if (0x1ed8 == tea5757_read(btv)) {
3701 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3702 btv->c.nr);
3703 btv->has_radio = 1;
3704 btv->has_saa6588 = 1;
3705 btv->has_matchbox = 1;
3706 } else {
3707 btv->has_radio = 0;
3708 btv->has_matchbox = 0;
3709 }
3710 return 0;
3711}
3712
3713
3714/* ----------------------------------------------------------------------- */
3715
3716/*
3717 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3718 *
3719 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3720 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3721 * unpacked with unzip).
3722 */
3723#define PVR_GPIO_DELAY 10
3724
3725#define BTTV_ALT_DATA 0x000001
3726#define BTTV_ALT_DCLK 0x100000
3727#define BTTV_ALT_NCONFIG 0x800000
3728
3729static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3730 u32 microlen)
3731{
3732 u32 n;
3733 u8 bits;
3734 int i;
3735
3736 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3737 gpio_write(0);
3738 udelay(PVR_GPIO_DELAY);
3739
3740 gpio_write(BTTV_ALT_NCONFIG);
3741 udelay(PVR_GPIO_DELAY);
3742
3743 for (n = 0; n < microlen; n++) {
3744 bits = micro[n];
3745 for (i = 0 ; i < 8 ; i++) {
3746 gpio_bits(BTTV_ALT_DCLK,0);
3747 if (bits & 0x01)
3748 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3749 else
3750 gpio_bits(BTTV_ALT_DATA,0);
3751 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3752 bits >>= 1;
3753 }
3754 }
3755 gpio_bits(BTTV_ALT_DCLK,0);
3756 udelay(PVR_GPIO_DELAY);
3757
3758 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3759 for (i = 0 ; i < 30 ; i++) {
3760 gpio_bits(BTTV_ALT_DCLK,0);
3761 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3762 }
3763 gpio_bits(BTTV_ALT_DCLK,0);
3764 return 0;
3765}
3766
3767static int __devinit pvr_boot(struct bttv *btv)
3768{
3769 const struct firmware *fw_entry;
3770 int rc;
3771
3772 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3773 if (rc != 0) {
3774 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3775 btv->c.nr);
3776 return rc;
3777 }
3778 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3779 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3780 btv->c.nr, (rc < 0) ? "failed" : "ok");
3781 release_firmware(fw_entry);
3782 return rc;
3783}
3784
3785/* ----------------------------------------------------------------------- */
3786/* some osprey specific stuff */
3787
3788static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3789{
3790 int i;
3791 u32 serial = 0;
3792 int cardid = -1;
3793
3794 /* This code will nevery actually get called in this case.... */
3795 if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3796 /* this might be an antique... check for MMAC label in eeprom */
3797 if (!strncmp(ee, "MMAC", 4)) {
3798 u8 checksum = 0;
3799 for (i = 0; i < 21; i++)
3800 checksum += ee[i];
3801 if (checksum != ee[21])
3802 return;
3803 cardid = BTTV_BOARD_OSPREY1x0_848;
3804 for (i = 12; i < 21; i++)
3805 serial *= 10, serial += ee[i] - '0';
3806 }
3807 } else {
3808 unsigned short type;
3809
3810 for (i = 4*16; i < 8*16; i += 16) {
3811 u16 checksum = ip_compute_csum(ee + i, 16);
3812
3813 if ((checksum&0xff) + (checksum>>8) == 0xff)
3814 break;
3815 }
3816 if (i >= 8*16)
3817 return;
3818 ee += i;
3819
3820 /* found a valid descriptor */
3821 type = get_unaligned_be16((__be16 *)(ee+4));
3822
3823 switch(type) {
3824 /* 848 based */
3825 case 0x0004:
3826 cardid = BTTV_BOARD_OSPREY1x0_848;
3827 break;
3828 case 0x0005:
3829 cardid = BTTV_BOARD_OSPREY101_848;
3830 break;
3831
3832 /* 878 based */
3833 case 0x0012:
3834 case 0x0013:
3835 cardid = BTTV_BOARD_OSPREY1x0;
3836 break;
3837 case 0x0014:
3838 case 0x0015:
3839 cardid = BTTV_BOARD_OSPREY1x1;
3840 break;
3841 case 0x0016:
3842 case 0x0017:
3843 case 0x0020:
3844 cardid = BTTV_BOARD_OSPREY1x1_SVID;
3845 break;
3846 case 0x0018:
3847 case 0x0019:
3848 case 0x001E:
3849 case 0x001F:
3850 cardid = BTTV_BOARD_OSPREY2xx;
3851 break;
3852 case 0x001A:
3853 case 0x001B:
3854 cardid = BTTV_BOARD_OSPREY2x0_SVID;
3855 break;
3856 case 0x0040:
3857 cardid = BTTV_BOARD_OSPREY500;
3858 break;
3859 case 0x0050:
3860 case 0x0056:
3861 cardid = BTTV_BOARD_OSPREY540;
3862 /* bttv_osprey_540_init(btv); */
3863 break;
3864 case 0x0060:
3865 case 0x0070:
3866 case 0x00A0:
3867 cardid = BTTV_BOARD_OSPREY2x0;
3868 /* enable output on select control lines */
3869 gpio_inout(0xffffff,0x000303);
3870 break;
3871 case 0x00D8:
3872 cardid = BTTV_BOARD_OSPREY440;
3873 break;
3874 default:
3875 /* unknown...leave generic, but get serial # */
3876 printk(KERN_INFO "bttv%d: "
3877 "osprey eeprom: unknown card type 0x%04x\n",
3878 btv->c.nr, type);
3879 break;
3880 }
3881 serial = get_unaligned_be32((__be32 *)(ee+6));
3882 }
3883
3884 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3885 btv->c.nr, cardid,
3886 cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3887
3888 if (cardid<0 || btv->c.type == cardid)
3889 return;
3890
3891 /* card type isn't set correctly */
3892 if (card[btv->c.nr] < bttv_num_tvcards) {
3893 printk(KERN_WARNING "bttv%d: osprey eeprom: "
3894 "Not overriding user specified card type\n", btv->c.nr);
3895 } else {
3896 printk(KERN_INFO "bttv%d: osprey eeprom: "
3897 "Changing card type from %d to %d\n", btv->c.nr,
3898 btv->c.type, cardid);
3899 btv->c.type = cardid;
3900 }
3901}
3902
3903/* ----------------------------------------------------------------------- */
3904/* AVermedia specific stuff, from bktr_card.c */
3905
3906static int tuner_0_table[] = {
3907 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3908 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3909 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3910 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3911 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3912 TUNER_PHILIPS_FM1216ME_MK3 };
3913
3914static int tuner_1_table[] = {
3915 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3916 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3917 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3918 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3919 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3920
3921static void __devinit avermedia_eeprom(struct bttv *btv)
3922{
3923 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3924
3925 tuner_make = (eeprom_data[0x41] & 0x7);
3926 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3927 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3928 btv->has_remote = (eeprom_data[0x42] & 0x01);
3929
3930 if (tuner_make == 0 || tuner_make == 2)
3931 if (tuner_format <= 0x0a)
3932 tuner_type = tuner_0_table[tuner_format];
3933 if (tuner_make == 1)
3934 if (tuner_format <= 9)
3935 tuner_type = tuner_1_table[tuner_format];
3936
3937 if (tuner_make == 4)
3938 if (tuner_format == 0x09)
3939 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3940
3941 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3942 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3943 if (tuner_type) {
3944 btv->tuner_type = tuner_type;
3945 printk(KERN_CONT "%d", tuner_type);
3946 } else
3947 printk(KERN_CONT "Unknown type");
3948 printk(KERN_CONT " radio:%s remote control:%s\n",
3949 tuner_tv_fm ? "yes" : "no",
3950 btv->has_remote ? "yes" : "no");
3951}
3952
3953/*
3954 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
3955 * analog demod, which is not I2C controlled like the newer and more common
3956 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
3957 * that control the IF for the video and audio. Apparently, bttv GPIO
3958 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
3959 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
3960 */
3961u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
3962{
3963
3964 if (btv->audio == TVAUDIO_INPUT_TUNER) {
3965 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
3966 gpiobits |= 0x10000;
3967 else
3968 gpiobits &= ~0x10000;
3969 }
3970
3971 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
3972 return gpiobits;
3973}
3974
3975
3976/*
3977 * reset/enable the MSP on some Hauppauge cards
3978 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3979 *
3980 * Hauppauge: pin 5
3981 * Voodoo: pin 20
3982 */
3983static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3984{
3985 int mask = (1 << pin);
3986
3987 gpio_inout(mask,mask);
3988 gpio_bits(mask,0);
3989 mdelay(2);
3990 udelay(500);
3991 gpio_bits(mask,mask);
3992
3993 if (bttv_gpio)
3994 bttv_gpio_tracking(btv,"msp34xx");
3995 if (bttv_verbose)
3996 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3997 "init [%d]\n", btv->c.nr, pin);
3998}
3999
4000/* ----------------------------------------------------------------------- */
4001/* Imagenation L-Model PXC200 Framegrabber */
4002/* This is basically the same procedure as
4003 * used by Alessandro Rubini in his pxc200
4004 * driver, but using BTTV functions */
4005
4006static void __devinit init_PXC200(struct bttv *btv)
4007{
4008 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
4009 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
4010 0x00 };
4011 unsigned int i;
4012 int tmp;
4013 u32 val;
4014
4015 /* Initialise GPIO-connevted stuff */
4016 gpio_inout(0xffffff, (1<<13));
4017 gpio_write(0);
4018 udelay(3);
4019 gpio_write(1<<13);
4020 /* GPIO inputs are pulled up, so no need to drive
4021 * reset pin any longer */
4022 gpio_bits(0xffffff, 0);
4023 if (bttv_gpio)
4024 bttv_gpio_tracking(btv,"pxc200");
4025
4026 /* we could/should try and reset/control the AD pots? but
4027 right now we simply turned off the crushing. Without
4028 this the AGC drifts drifts
4029 remember the EN is reverse logic -->
4030 setting BT848_ADC_AGC_EN disable the AGC
4031 tboult@eecs.lehigh.edu
4032 */
4033
4034 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4035
4036 /* Initialise MAX517 DAC */
4037 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
4038 bttv_I2CWrite(btv,0x5E,0,0x80,1);
4039
4040 /* Initialise 12C508 PIC */
4041 /* The I2CWrite and I2CRead commmands are actually to the
4042 * same chips - but the R/W bit is included in the address
4043 * argument so the numbers are different */
4044
4045
4046 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
4047
4048 /* First of all, enable the clock line. This is used in the PXC200-F */
4049 val = btread(BT848_GPIO_DMA_CTL);
4050 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4051 btwrite(val, BT848_GPIO_DMA_CTL);
4052
4053 /* Then, push to 0 the reset pin long enough to reset the *
4054 * device same as above for the reset line, but not the same
4055 * value sent to the GPIO-connected stuff
4056 * which one is the good one? */
4057 gpio_inout(0xffffff,(1<<2));
4058 gpio_write(0);
4059 udelay(10);
4060 gpio_write(1<<2);
4061
4062 for (i = 0; i < ARRAY_SIZE(vals); i++) {
4063 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4064 if (tmp != -1) {
4065 printk(KERN_INFO
4066 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4067 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4068 }
4069 }
4070
4071 printk(KERN_INFO "PXC200 Initialised.\n");
4072}
4073
4074
4075
4076/* ----------------------------------------------------------------------- */
4077/*
4078 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4079 * it. This apparently involves the following procedure for each 878 chip:
4080 *
4081 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
4082 *
4083 * 2) write to GPIO_DATA
4084 * - 0x0E
4085 * - sleep 1ms
4086 * - 0x10 + 0x0E
4087 * - sleep 10ms
4088 * - 0x0E
4089 * read from GPIO_DATA into buf (uint_32)
4090 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4091 * error. ERROR_CPLD_Check_Failed stop.
4092 *
4093 * 3) write to GPIO_DATA
4094 * - write 0x4400 + 0x0E
4095 * - sleep 10ms
4096 * - write 0x4410 + 0x0E
4097 * - sleep 1ms
4098 * - write 0x0E
4099 * read from GPIO_DATA into buf (uint_32)
4100 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4101 * error. ERROR_CPLD_Check_Failed.
4102 */
4103/* ----------------------------------------------------------------------- */
4104static void
4105init_RTV24 (struct bttv *btv)
4106{
4107 uint32_t dataRead = 0;
4108 long watchdog_value = 0x0E;
4109
4110 printk (KERN_INFO
4111 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4112 btv->c.nr);
4113
4114 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4115
4116 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4117 msleep (1);
4118 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4119 msleep (10);
4120 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4121
4122 dataRead = btread (BT848_GPIO_DATA);
4123
4124 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4125 printk (KERN_INFO
4126 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4127 btv->c.nr, dataRead);
4128 }
4129
4130 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4131 msleep (10);
4132 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4133 msleep (1);
4134 btwrite (watchdog_value, BT848_GPIO_DATA);
4135 msleep (1);
4136 dataRead = btread (BT848_GPIO_DATA);
4137
4138 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4139 printk (KERN_INFO
4140 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4141 btv->c.nr, dataRead);
4142
4143 return;
4144 }
4145
4146 printk (KERN_INFO
4147 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4148}
4149
4150
4151
4152/* ----------------------------------------------------------------------- */
4153/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4154/*
4155 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4156 * This code is placed under the terms of the GNU General Public License
4157 *
4158 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4159 */
4160
4161static void bus_low(struct bttv *btv, int bit)
4162{
4163 if (btv->mbox_ior) {
4164 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4165 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4166 udelay(5);
4167 }
4168
4169 gpio_bits(bit,0);
4170 udelay(5);
4171
4172 if (btv->mbox_ior) {
4173 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4174 udelay(5);
4175 }
4176}
4177
4178static void bus_high(struct bttv *btv, int bit)
4179{
4180 if (btv->mbox_ior) {
4181 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4182 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4183 udelay(5);
4184 }
4185
4186 gpio_bits(bit,bit);
4187 udelay(5);
4188
4189 if (btv->mbox_ior) {
4190 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4191 udelay(5);
4192 }
4193}
4194
4195static int bus_in(struct bttv *btv, int bit)
4196{
4197 if (btv->mbox_ior) {
4198 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4199 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4200 udelay(5);
4201
4202 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4203 udelay(5);
4204 }
4205 return gpio_read() & (bit);
4206}
4207
4208/* TEA5757 register bits */
4209#define TEA_FREQ 0:14
4210#define TEA_BUFFER 15:15
4211
4212#define TEA_SIGNAL_STRENGTH 16:17
4213
4214#define TEA_PORT1 18:18
4215#define TEA_PORT0 19:19
4216
4217#define TEA_BAND 20:21
4218#define TEA_BAND_FM 0
4219#define TEA_BAND_MW 1
4220#define TEA_BAND_LW 2
4221#define TEA_BAND_SW 3
4222
4223#define TEA_MONO 22:22
4224#define TEA_ALLOW_STEREO 0
4225#define TEA_FORCE_MONO 1
4226
4227#define TEA_SEARCH_DIRECTION 23:23
4228#define TEA_SEARCH_DOWN 0
4229#define TEA_SEARCH_UP 1
4230
4231#define TEA_STATUS 24:24
4232#define TEA_STATUS_TUNED 0
4233#define TEA_STATUS_SEARCHING 1
4234
4235/* Low-level stuff */
4236static int tea5757_read(struct bttv *btv)
4237{
4238 unsigned long timeout;
4239 int value = 0;
4240 int i;
4241
4242 /* better safe than sorry */
4243 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4244
4245 if (btv->mbox_ior) {
4246 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4247 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4248 udelay(5);
4249 }
4250
4251 if (bttv_gpio)
4252 bttv_gpio_tracking(btv,"tea5757 read");
4253
4254 bus_low(btv,btv->mbox_we);
4255 bus_low(btv,btv->mbox_clk);
4256
4257 udelay(10);
4258 timeout= jiffies + msecs_to_jiffies(1000);
4259
4260 /* wait for DATA line to go low; error if it doesn't */
4261 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4262 schedule();
4263 if (bus_in(btv,btv->mbox_data)) {
4264 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4265 return -1;
4266 }
4267
4268 dprintk("bttv%d: tea5757:",btv->c.nr);
4269 for (i = 0; i < 24; i++) {
4270 udelay(5);
4271 bus_high(btv,btv->mbox_clk);
4272 udelay(5);
4273 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4274 bus_low(btv,btv->mbox_clk);
4275 value <<= 1;
4276 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4277 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4278 }
4279 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4280 return value;
4281}
4282
4283static int tea5757_write(struct bttv *btv, int value)
4284{
4285 int i;
4286 int reg = value;
4287
4288 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4289
4290 if (btv->mbox_ior) {
4291 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4292 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4293 udelay(5);
4294 }
4295 if (bttv_gpio)
4296 bttv_gpio_tracking(btv,"tea5757 write");
4297
4298 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4299 bus_low(btv,btv->mbox_clk);
4300 bus_high(btv,btv->mbox_we);
4301 for (i = 0; i < 25; i++) {
4302 if (reg & 0x1000000)
4303 bus_high(btv,btv->mbox_data);
4304 else
4305 bus_low(btv,btv->mbox_data);
4306 reg <<= 1;
4307 bus_high(btv,btv->mbox_clk);
4308 udelay(10);
4309 bus_low(btv,btv->mbox_clk);
4310 udelay(10);
4311 }
4312 bus_low(btv,btv->mbox_we); /* unmute !!! */
4313 return 0;
4314}
4315
4316void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4317{
4318 dprintk("tea5757_set_freq %d\n",freq);
4319 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4320}
4321
4322/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4323 *
4324 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4325 * switch instead (CD22M3494E). This IC can have multiple active connections
4326 * between Xn (input) and Yn (output) pins. We need to clear any existing
4327 * connection prior to establish a new one, pulsing the STROBE pin.
4328 *
4329 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4330 * GPIO pins are wired as:
4331 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4332 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4333 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
4334 * GPIO[8] - - P3[5] (microcontroller)
4335 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
4336 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
4337 * GPINTR - - P3[4] (microcontroller)
4338 *
4339 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4340 * configuration either directly (as we are doing) or using the microcontroller
4341 * which is also wired to I2C interface. I have no further info on the
4342 * microcontroller features, one would need to disassembly the firmware.
4343 * note: the vendor refused to give any information on this product, all
4344 * that stuff was found using a multimeter! :)
4345 */
4346static void rv605_muxsel(struct bttv *btv, unsigned int input)
4347{
4348 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4349 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4350
4351 gpio_bits(0x07f, muxgpio[input]);
4352
4353 /* reset all conections */
4354 gpio_bits(0x200,0x200);
4355 mdelay(1);
4356 gpio_bits(0x200,0x000);
4357 mdelay(1);
4358
4359 /* create a new connection */
4360 gpio_bits(0x480,0x480);
4361 mdelay(1);
4362 gpio_bits(0x480,0x080);
4363 mdelay(1);
4364}
4365
4366/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4367 *
4368 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4369 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4370 * chips, ten eight input analog multiplexors, a not chip and a few
4371 * other components.
4372 *
4373 * 16 inputs on a secondary bracket are provided and can be selected
4374 * from each of the four capture chips. Two of the eight input
4375 * multiplexors are used to select from any of the 16 input signals.
4376 *
4377 * Unsupported hardware capabilities:
4378 * . A video output monitor on the secondary bracket can be selected from
4379 * one of the 878A chips.
4380 * . Another passthrough but I haven't spent any time investigating it.
4381 * . Digital I/O (logic level connected to GPIO) is available from an
4382 * onboard header.
4383 *
4384 * The on chip input mux should always be set to 2.
4385 * GPIO[16:19] - Video input selection
4386 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4387 * GPIO[?:?] - Digital I/O.
4388 *
4389 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4390 * determined what function (if any) it provides. With the microcontroller
4391 * and sync separator chips a guess is that it might have to do with video
4392 * switching and maybe some digital I/O.
4393 */
4394static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4395{
4396 /* video mux */
4397 gpio_bits(0x0f0000, input << 16);
4398}
4399
4400static void tibetCS16_init(struct bttv *btv)
4401{
4402 /* enable gpio bits, mask obtained via btSpy */
4403 gpio_inout(0xffffff, 0x0f7fff);
4404 gpio_write(0x0f7fff);
4405}
4406
4407/*
4408 * The following routines for the Kodicom-4400r get a little mind-twisting.
4409 * There is a "master" controller and three "slave" controllers, together
4410 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4411 * The analog switch is controlled by the "master", but the detection order
4412 * of the four BT878A chips is in an order which I just don't understand.
4413 * The "master" is actually the second controller to be detected. The
4414 * logic on the board uses logical numbers for the 4 controllers, but
4415 * those numbers are different from the detection sequence. When working
4416 * with the analog switch, we need to "map" from the detection sequence
4417 * over to the board's logical controller number. This mapping sequence
4418 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4419 * unit 3, the second (which is the master) is logical unit 0, etc.
4420 * We need to maintain the status of the analog switch (which of the 16
4421 * cameras is connected to which of the 4 controllers). Rather than
4422 * add to the bttv structure for this, we use the data reserved for
4423 * the mbox (unused for this card type).
4424 */
4425
4426/*
4427 * First a routine to set the analog switch, which controls which camera
4428 * is routed to which controller. The switch comprises an X-address
4429 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4430 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4431 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4432 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4433 * specified address. The idea is to set the address and data, then bring
4434 * STROBE high, and finally bring STROBE back to low.
4435 */
4436static void kodicom4400r_write(struct bttv *btv,
4437 unsigned char xaddr,
4438 unsigned char yaddr,
4439 unsigned char data) {
4440 unsigned int udata;
4441
4442 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4443 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4444 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4445 gpio_bits(0x1ff, udata); /* strobe low */
4446}
4447
4448/*
4449 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4450 * use this routine. The routine finds the "master" for the card, maps
4451 * the controller number from the detected position over to the logical
4452 * number, writes the appropriate data to the analog switch, and housekeeps
4453 * the local copy of the switch information. The parameter 'input' is the
4454 * requested camera number (0 - 15).
4455 */
4456static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4457{
4458 char *sw_status;
4459 int xaddr, yaddr;
4460 struct bttv *mctlr;
4461 static unsigned char map[4] = {3, 0, 2, 1};
4462
4463 mctlr = master[btv->c.nr];
4464 if (mctlr == NULL) { /* ignore if master not yet detected */
4465 return;
4466 }
4467 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4468 yaddr = map[yaddr];
4469 sw_status = (char *)(&mctlr->mbox_we);
4470 xaddr = input & 0xf;
4471 /* Check if the controller/camera pair has changed, else ignore */
4472 if (sw_status[yaddr] != xaddr)
4473 {
4474 /* "open" the old switch, "close" the new one, save the new */
4475 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4476 sw_status[yaddr] = xaddr;
4477 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4478 }
4479}
4480
4481/*
4482 * During initialisation, we need to reset the analog switch. We
4483 * also preset the switch to map the 4 connectors on the card to the
4484 * *user's* (see above description of kodicom4400r_muxsel) channels
4485 * 0 through 3
4486 */
4487static void kodicom4400r_init(struct bttv *btv)
4488{
4489 char *sw_status = (char *)(&btv->mbox_we);
4490 int ix;
4491
4492 gpio_inout(0x0003ff, 0x0003ff);
4493 gpio_write(1 << 9); /* reset MUX */
4494 gpio_write(0);
4495 /* Preset camera 0 to the 4 controllers */
4496 for (ix = 0; ix < 4; ix++) {
4497 sw_status[ix] = ix;
4498 kodicom4400r_write(btv, ix, ix, 1);
4499 }
4500 /*
4501 * Since this is the "master", we need to set up the
4502 * other three controller chips' pointers to this structure
4503 * for later use in the muxsel routine.
4504 */
4505 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4506 return;
4507 master[btv->c.nr-1] = btv;
4508 master[btv->c.nr] = btv;
4509 master[btv->c.nr+1] = btv;
4510 master[btv->c.nr+2] = btv;
4511}
4512
4513/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4514 * video multiplexers to provide up to 16 video inputs. These
4515 * multiplexers are controlled by the lower 8 GPIO pins of the
4516 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4517
4518 * xxx0 is pin xxx of multiplexer U5,
4519 * yyy1 is pin yyy of multiplexer U2
4520 */
4521#define ENA0 0x01
4522#define ENB0 0x02
4523#define ENA1 0x04
4524#define ENB1 0x08
4525
4526#define IN10 0x10
4527#define IN00 0x20
4528#define IN11 0x40
4529#define IN01 0x80
4530
4531static void xguard_muxsel(struct bttv *btv, unsigned int input)
4532{
4533 static const int masks[] = {
4534 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4535 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4536 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4537 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4538 };
4539 gpio_write(masks[input%16]);
4540}
4541static void picolo_tetra_init(struct bttv *btv)
4542{
4543 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4544 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4545 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4546}
4547static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4548{
4549
4550 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4551 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4552 /*GPIO[20]&GPIO[21] used to choose the right input*/
4553 btwrite (input<<20,BT848_GPIO_DATA);
4554
4555}
4556
4557/*
4558 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4559 *
4560 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4561 * swichers to provide 16 channels to MUX0. The TDA8540's have
4562 * 4 independent outputs and as such the IVC120G also has the
4563 * optional "Monitor Out" bus. This allows the card to be looking
4564 * at one input while the monitor is looking at another.
4565 *
4566 * Since I've couldn't be bothered figuring out how to add an
4567 * independent muxsel for the monitor bus, I've just set it to
4568 * whatever the card is looking at.
4569 *
4570 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4571 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4572 *
4573 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4574 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4575 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4576 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4577 *
4578 */
4579
4580/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4581#define I2C_TDA8540 0x90
4582#define I2C_TDA8540_ALT1 0x92
4583#define I2C_TDA8540_ALT2 0x94
4584#define I2C_TDA8540_ALT3 0x96
4585#define I2C_TDA8540_ALT4 0x98
4586#define I2C_TDA8540_ALT5 0x9a
4587#define I2C_TDA8540_ALT6 0x9c
4588
4589static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4590{
4591 /* Simple maths */
4592 int key = input % 4;
4593 int matrix = input / 4;
4594
4595 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4596 btv->c.nr, input, matrix, key);
4597
4598 /* Handles the input selection on the TDA8540's */
4599 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4600 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4601 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4602 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4603 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4604 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4605 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4606 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4607
4608 /* Handles the output enables on the TDA8540's */
4609 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4610 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4611 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4612 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4613 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4614 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4615 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4616 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4617
4618 /* 878's MUX0 is already selected for input via muxsel values */
4619}
4620
4621
4622/* PXC200 muxsel helper
4623 * luke@syseng.anu.edu.au
4624 * another transplant
4625 * from Alessandro Rubini (rubini@linux.it)
4626 *
4627 * There are 4 kinds of cards:
4628 * PXC200L which is bt848
4629 * PXC200F which is bt848 with PIC controlling mux
4630 * PXC200AL which is bt878
4631 * PXC200AF which is bt878 with PIC controlling mux
4632 */
4633#define PX_CFG_PXC200F 0x01
4634#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4635#define PX_I2C_PIC 0x0f
4636#define PX_PXC200A_CARDID 0x200a1295
4637#define PX_I2C_CMD_CFG 0x00
4638
4639static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4640{
4641 int rc;
4642 long mux;
4643 int bitmask;
4644 unsigned char buf[2];
4645
4646 /* Read PIC config to determine if this is a PXC200F */
4647 /* PX_I2C_CMD_CFG*/
4648 buf[0]=0;
4649 buf[1]=0;
4650 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4651 if (rc) {
4652 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4653 /* not PXC ? do nothing */
4654 return;
4655 }
4656
4657 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4658 if (!(rc & PX_CFG_PXC200F)) {
4659 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4660 return;
4661 }
4662
4663
4664 /* The multiplexer in the 200F is handled by the GPIO port */
4665 /* get correct mapping between inputs */
4666 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4667 /* ** not needed!? */
4668 mux = input;
4669
4670 /* make sure output pins are enabled */
4671 /* bitmask=0x30f; */
4672 bitmask=0x302;
4673 /* check whether we have a PXC200A */
4674 if (btv->cardid == PX_PXC200A_CARDID) {
4675 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4676 bitmask |= 7<<4; /* the DAC */
4677 }
4678 btwrite(bitmask, BT848_GPIO_OUT_EN);
4679
4680 bitmask = btread(BT848_GPIO_DATA);
4681 if (btv->cardid == PX_PXC200A_CARDID)
4682 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4683 else /* older device */
4684 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4685 btwrite(bitmask,BT848_GPIO_DATA);
4686
4687 /*
4688 * Was "to be safe, set the bt848 to input 0"
4689 * Actually, since it's ok at load time, better not messing
4690 * with these bits (on PXC200AF you need to set mux 2 here)
4691 *
4692 * needed because bttv-driver sets mux before calling this function
4693 */
4694 if (btv->cardid == PX_PXC200A_CARDID)
4695 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4696 else /* older device */
4697 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4698
4699 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4700}
4701
4702static void phytec_muxsel(struct bttv *btv, unsigned int input)
4703{
4704 unsigned int mux = input % 4;
4705
4706 if (input == btv->svhs)
4707 mux = 0;
4708
4709 gpio_bits(0x3, mux);
4710}
4711
4712/*
4713 * GeoVision GV-800(S) functions
4714 * Bruno Christo <bchristo@inf.ufsm.br>
4715*/
4716
4717/* This is a function to control the analog switch, which determines which
4718 * camera is routed to which controller. The switch comprises an X-address
4719 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4720 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4721 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4722 * the switch. A STROBE bit (gpio bit 17) latches the data value into the
4723 * specified address. There is also a chip select (gpio bit 16).
4724 * The idea is to set the address and chip select together, bring
4725 * STROBE high, write the data, and finally bring STROBE back to low.
4726 */
4727static void gv800s_write(struct bttv *btv,
4728 unsigned char xaddr,
4729 unsigned char yaddr,
4730 unsigned char data) {
4731 /* On the "master" 878A:
4732 * GPIO bits 0-9 are used for the analog switch:
4733 * 00 - 03: camera selector
4734 * 04 - 06: 878A (controller) selector
4735 * 16: cselect
4736 * 17: strobe
4737 * 18: data (1->on, 0->off)
4738 * 19: reset
4739 */
4740 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4741 const u32 CSELECT = 1<<16;
4742 const u32 STROBE = 1<<17;
4743 const u32 DATA = data<<18;
4744
4745 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
4746 gpio_bits(0x20000, STROBE); /* STROBE high */
4747 gpio_bits(0x40000, DATA); /* write DATA */
4748 gpio_bits(0x20000, ~STROBE); /* STROBE low */
4749}
4750
4751/*
4752 * GeoVision GV-800(S) muxsel
4753 *
4754 * Each of the 4 cards (controllers) use this function.
4755 * The controller using this function selects the input through the GPIO pins
4756 * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4757 *
4758 * The parameter 'input' is the requested camera number (0-4) on the controller.
4759 * The map array has the address of each input. Note that the addresses in the
4760 * array are in the sequence the original GeoVision driver uses, that is, set
4761 * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4762 * the physical "camera 1" connector corresponds to controller 0 input 0,
4763 * "camera 2" corresponds to controller 1 input 0, and so on.
4764 *
4765 * After getting the input address, the function then writes the appropriate
4766 * data to the analog switch, and housekeeps the local copy of the switch
4767 * information.
4768 */
4769static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4770{
4771 struct bttv *mctlr;
4772 char *sw_status;
4773 int xaddr, yaddr;
4774 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4775 { 0x1, 0x5, 0xb, 0x7 },
4776 { 0x2, 0x8, 0xc, 0xe },
4777 { 0x3, 0x9, 0xd, 0xf } };
4778 input = input%4;
4779 mctlr = master[btv->c.nr];
4780 if (mctlr == NULL) {
4781 /* do nothing until the "master" is detected */
4782 return;
4783 }
4784 yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4785 sw_status = (char *)(&mctlr->mbox_we);
4786 xaddr = map[yaddr][input] & 0xf;
4787
4788 /* Check if the controller/camera pair has changed, ignore otherwise */
4789 if (sw_status[yaddr] != xaddr) {
4790 /* disable the old switch, enable the new one and save status */
4791 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4792 sw_status[yaddr] = xaddr;
4793 gv800s_write(mctlr, xaddr, yaddr, 1);
4794 }
4795}
4796
4797/* GeoVision GV-800(S) "master" chip init */
4798static void gv800s_init(struct bttv *btv)
4799{
4800 char *sw_status = (char *)(&btv->mbox_we);
4801 int ix;
4802
4803 gpio_inout(0xf107f, 0xf107f);
4804 gpio_write(1<<19); /* reset the analog MUX */
4805 gpio_write(0);
4806
4807 /* Preset camera 0 to the 4 controllers */
4808 for (ix = 0; ix < 4; ix++) {
4809 sw_status[ix] = ix;
4810 gv800s_write(btv, ix, ix, 1);
4811 }
4812
4813 /* Inputs on the "master" controller need this brightness fix */
4814 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4815
4816 if (btv->c.nr > BTTV_MAX-4)
4817 return;
4818 /*
4819 * Store the "master" controller pointer in the master
4820 * array for later use in the muxsel function.
4821 */
4822 master[btv->c.nr] = btv;
4823 master[btv->c.nr+1] = btv;
4824 master[btv->c.nr+2] = btv;
4825 master[btv->c.nr+3] = btv;
4826}
4827
4828/* ----------------------------------------------------------------------- */
4829/* motherboard chipset specific stuff */
4830
4831void __init bttv_check_chipset(void)
4832{
4833 int pcipci_fail = 0;
4834 struct pci_dev *dev = NULL;
4835
4836 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
4837 pcipci_fail = 1;
4838 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4839 triton1 = 1;
4840 if (pci_pci_problems & PCIPCI_VSFX)
4841 vsfx = 1;
4842#ifdef PCIPCI_ALIMAGIK
4843 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4844 latency = 0x0A;
4845#endif
4846
4847
4848 /* print warnings about any quirks found */
4849 if (triton1)
4850 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4851 if (vsfx)
4852 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4853 if (pcipci_fail) {
4854 printk(KERN_INFO "bttv: bttv and your chipset may not work "
4855 "together.\n");
4856 if (!no_overlay) {
4857 printk(KERN_INFO "bttv: overlay will be disabled.\n");
4858 no_overlay = 1;
4859 } else {
4860 printk(KERN_INFO "bttv: overlay forced. Use this "
4861 "option at your own risk.\n");
4862 }
4863 }
4864 if (UNSET != latency)
4865 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4866 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4867 PCI_DEVICE_ID_INTEL_82441, dev))) {
4868 unsigned char b;
4869 pci_read_config_byte(dev, 0x53, &b);
4870 if (bttv_debug)
4871 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4872 "bufcon=0x%02x\n",b);
4873 }
4874}
4875
4876int __devinit bttv_handle_chipset(struct bttv *btv)
4877{
4878 unsigned char command;
4879
4880 if (!triton1 && !vsfx && UNSET == latency)
4881 return 0;
4882
4883 if (bttv_verbose) {
4884 if (triton1)
4885 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4886 if (vsfx && btv->id >= 878)
4887 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4888 if (UNSET != latency)
4889 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4890 btv->c.nr,latency);
4891 }
4892
4893 if (btv->id < 878) {
4894 /* bt848 (mis)uses a bit in the irq mask for etbf */
4895 if (triton1)
4896 btv->triton1 = BT848_INT_ETBF;
4897 } else {
4898 /* bt878 has a bit in the pci config space for it */
4899 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4900 if (triton1)
4901 command |= BT878_EN_TBFX;
4902 if (vsfx)
4903 command |= BT878_EN_VSFX;
4904 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4905 }
4906 if (UNSET != latency)
4907 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4908 return 0;
4909}
4910
4911
4912/*
4913 * Local variables:
4914 * c-basic-offset: 8
4915 * End:
4916 */
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-20 16:34:21 -0400