1 files changed, 147 insertions, 0 deletions

diff --git a/drivers/media/common/b2c2/flexcop-eeprom.c b/drivers/media/common/b2c2/flexcop-eeprom.c
new file mode 100644
index 00000000000..a25373a9bd8
--- /dev/null
+++ b/drivers/media/common/b2c2/flexcop-eeprom.c
@@ -0,0 +1,147 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading)
+ * see flexcop.c for copyright information
+ */
+#include "flexcop.h"
+
+#if 0
+/*EEPROM (Skystar2 has one "24LC08B" chip on board) */
+static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len)
+{
+        return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len);
+}
+
+static int eeprom_lrc_write(struct adapter *adapter, u32 addr,
+                u32 len, u8 *wbuf, u8 *rbuf, int retries)
+{
+int i;
+
+for (i = 0; i < retries; i++) {
+        if (eeprom_write(adapter, addr, wbuf, len) == len) {
+                if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
+                        return 1;
+                }
+        }
+        return 0;
+}
+
+/* These functions could be used to unlock SkyStar2 cards. */
+
+static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len)
+{
+        u8 rbuf[20];
+        u8 wbuf[20];
+
+        if (len != 16)
+                return 0;
+
+        memcpy(wbuf, key, len);
+        wbuf[16] = 0;
+        wbuf[17] = 0;
+        wbuf[18] = 0;
+        wbuf[19] = calc_lrc(wbuf, 19);
+        return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4);
+}
+
+static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len)
+{
+        u8 buf[20];
+
+        if (len != 16)
+                return 0;
+
+        if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0)
+                return 0;
+
+        memcpy(key, buf, len);
+        return 1;
+}
+
+static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac)
+{
+        u8 tmp[8];
+
+        if (type != 0) {
+                tmp[0] = mac[0];
+                tmp[1] = mac[1];
+                tmp[2] = mac[2];
+                tmp[3] = mac[5];
+                tmp[4] = mac[6];
+                tmp[5] = mac[7];
+        } else {
+                tmp[0] = mac[0];
+                tmp[1] = mac[1];
+                tmp[2] = mac[2];
+                tmp[3] = mac[3];
+                tmp[4] = mac[4];
+                tmp[5] = mac[5];
+        }
+
+        tmp[6] = 0;
+        tmp[7] = calc_lrc(tmp, 7);
+
+        if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8)
+                return 1;
+        return 0;
+}
+
+static int flexcop_eeprom_read(struct flexcop_device *fc,
+                u16 addr, u8 *buf, u16 len)
+{
+        return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len);
+}
+
+#endif
+
+static u8 calc_lrc(u8 *buf, int len)
+{
+        int i;
+        u8 sum = 0;
+        for (i = 0; i < len; i++)
+                sum = sum ^ buf[i];
+        return sum;
+}
+
+static int flexcop_eeprom_request(struct flexcop_device *fc,
+        flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
+{
+        int i,ret = 0;
+        u8 chipaddr =  0x50 | ((addr >> 8) & 3);
+        for (i = 0; i < retries; i++) {
+                ret = fc->i2c_request(&fc->fc_i2c_adap[1], op, chipaddr,
+                        addr & 0xff, buf, len);
+                if (ret == 0)
+                        break;
+        }
+        return ret;
+}
+
+static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr,
+                u8 *buf, u16 len, int retries)
+{
+        int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries);
+        if (ret == 0)
+                if (calc_lrc(buf, len - 1) != buf[len - 1])
+                        ret = -EINVAL;
+        return ret;
+}
+
+/* JJ's comment about extended == 1: it is not presently used anywhere but was
+ * added to the low-level functions for possible support of EUI64 */
+int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
+{
+        u8 buf[8];
+        int ret = 0;
+
+        if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
+                if (extended != 0) {
+                        err("TODO: extended (EUI64) MAC addresses aren't "
+                                "completely supported yet");
+                        ret = -EINVAL;
+                } else
+                        memcpy(fc->dvb_adapter.proposed_mac,buf,6);
+        }
+        return ret;
+}
+EXPORT_SYMBOL(flexcop_eeprom_check_mac_addr);