1 files changed, 73 insertions, 13 deletions

diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 7a03efd54f6..779d7f262c0 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -97,6 +97,10 @@ struct bd2802_led {
         enum led_ids                    led_id;
         enum led_colors                 color;
         enum led_bits                   state;
+
+        /* General attributes of RGB LEDs */
+        int                             wave_pattern;
+        int                             rgb_current;
 };
 
 
@@ -254,7 +258,7 @@ static void bd2802_set_on(struct bd2802_led *led, enum led_ids id,
                 bd2802_reset_cancel(led);
 
         reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
-        bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+        bd2802_write_byte(led->client, reg, led->rgb_current);
         reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
         bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
         reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
@@ -275,9 +279,9 @@ static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id,
         reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
         bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
         reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
-        bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+        bd2802_write_byte(led->client, reg, led->rgb_current);
         reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
-        bd2802_write_byte(led->client, reg, BD2802_PATTERN_HALF);
+        bd2802_write_byte(led->client, reg, led->wave_pattern);
 
         bd2802_enable(led, id);
         bd2802_update_state(led, id, color, BD2802_BLINK);
@@ -406,7 +410,7 @@ static void bd2802_enable_adv_conf(struct bd2802_led *led)
                 ret = device_create_file(&led->client->dev,
                                                 bd2802_addr_attributes[i]);
                 if (ret) {
-                        dev_err(&led->client->dev, "failed to sysfs file %s\n",
+                        dev_err(&led->client->dev, "failed: sysfs file %s\n",
                                         bd2802_addr_attributes[i]->attr.name);
                         goto failed_remove_files;
                 }
@@ -483,6 +487,52 @@ static struct device_attribute bd2802_adv_conf_attr = {
         .store = bd2802_store_adv_conf,
 };
 
+#define BD2802_CONTROL_ATTR(attr_name, name_str)                        \
+static ssize_t bd2802_show_##attr_name(struct device *dev,              \
+        struct device_attribute *attr, char *buf)                       \
+{                                                                       \
+        struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+        ssize_t ret;                                                    \
+        down_read(&led->rwsem);                                         \
+        ret = sprintf(buf, "0x%02x\n", led->attr_name);                 \
+        up_read(&led->rwsem);                                           \
+        return ret;                                                     \
+}                                                                       \
+static ssize_t bd2802_store_##attr_name(struct device *dev,             \
+        struct device_attribute *attr, const char *buf, size_t count)   \
+{                                                                       \
+        struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+        unsigned long val;                                              \
+        int ret;                                                        \
+        if (!count)                                                     \
+                return -EINVAL;                                         \
+        ret = strict_strtoul(buf, 16, &val);                            \
+        if (ret)                                                        \
+                return ret;                                             \
+        down_write(&led->rwsem);                                        \
+        led->attr_name = val;                                           \
+        up_write(&led->rwsem);                                          \
+        return count;                                                   \
+}                                                                       \
+static struct device_attribute bd2802_##attr_name##_attr = {            \
+        .attr = {                                                       \
+                .name = name_str,                                       \
+                .mode = 0644,                                           \
+                .owner = THIS_MODULE                                    \
+        },                                                              \
+        .show = bd2802_show_##attr_name,                                \
+        .store = bd2802_store_##attr_name,                              \
+};
+
+BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern");
+BD2802_CONTROL_ATTR(rgb_current, "rgb_current");
+
+static struct device_attribute *bd2802_attributes[] = {
+        &bd2802_adv_conf_attr,
+        &bd2802_wave_pattern_attr,
+        &bd2802_rgb_current_attr,
+};
+
 static void bd2802_led_work(struct work_struct *work)
 {
         struct bd2802_led *led = container_of(work, struct bd2802_led, work);
@@ -635,7 +685,7 @@ static int __devinit bd2802_probe(struct i2c_client *client,
 {
         struct bd2802_led *led;
         struct bd2802_led_platform_data *pdata;
-        int ret;
+        int ret, i;
 
         led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL);
         if (!led) {
@@ -665,13 +715,20 @@ static int __devinit bd2802_probe(struct i2c_client *client,
         /* To save the power, reset BD2802 after detecting */
         gpio_set_value(led->pdata->reset_gpio, 0);
 
+        /* Default attributes */
+        led->wave_pattern = BD2802_PATTERN_HALF;
+        led->rgb_current = BD2802_CURRENT_032;
+
         init_rwsem(&led->rwsem);
 
-        ret = device_create_file(&client->dev, &bd2802_adv_conf_attr);
-        if (ret) {
-                dev_err(&client->dev, "failed to create sysfs file %s\n",
-                                        bd2802_adv_conf_attr.attr.name);
-                goto failed_free;
+        for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) {
+                ret = device_create_file(&led->client->dev,
+                                                bd2802_attributes[i]);
+                if (ret) {
+                        dev_err(&led->client->dev, "failed: sysfs file %s\n",
+                                        bd2802_attributes[i]->attr.name);
+                        goto failed_unregister_dev_file;
+                }
         }
 
         ret = bd2802_register_led_classdev(led);
@@ -681,7 +738,8 @@ static int __devinit bd2802_probe(struct i2c_client *client,
         return 0;
 
 failed_unregister_dev_file:
-        device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+        for (i--; i >= 0; i--)
+                device_remove_file(&led->client->dev, bd2802_attributes[i]);
 failed_free:
         i2c_set_clientdata(client, NULL);
         kfree(led);
@@ -692,12 +750,14 @@ failed_free:
 static int __exit bd2802_remove(struct i2c_client *client)
 {
         struct bd2802_led *led = i2c_get_clientdata(client);
+        int i;
 
-        bd2802_unregister_led_classdev(led);
         gpio_set_value(led->pdata->reset_gpio, 0);
+        bd2802_unregister_led_classdev(led);
         if (led->adf_on)
                 bd2802_disable_adv_conf(led);
-        device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+        for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
+                device_remove_file(&led->client->dev, bd2802_attributes[i]);
         i2c_set_clientdata(client, NULL);
         kfree(led);