3 files changed, 50 insertions, 59 deletions

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index b31389605be..31b495fcd96 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -446,6 +446,27 @@ int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline)
 EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
 
 /**
+ *      ata_sff_set_devctl - Write device control reg
+ *      @ap: port where the device is
+ *      @ctl: value to write
+ *
+ *      Writes ATA taskfile device control register.
+ *
+ *      Note: may NOT be used as the sff_set_devctl() entry in
+ *      ata_port_operations.
+ *
+ *      LOCKING:
+ *      Inherited from caller.
+ */
+static void ata_sff_set_devctl(struct ata_port *ap, u8 ctl)
+{
+        if (ap->ops->sff_set_devctl)
+                ap->ops->sff_set_devctl(ap, ctl);
+        else
+                iowrite8(ctl, ap->ioaddr.ctl_addr);
+}
+
+/**
  *      ata_sff_dev_select - Select device 0/1 on ATA bus
  *      @ap: ATA channel to manipulate
  *      @device: ATA device (numbered from zero) to select
@@ -1895,13 +1916,11 @@ EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt);
  */
 void ata_sff_freeze(struct ata_port *ap)
 {
-        struct ata_ioports *ioaddr = &ap->ioaddr;
-
         ap->ctl |= ATA_NIEN;
         ap->last_ctl = ap->ctl;
 
-        if (ioaddr->ctl_addr)
-                iowrite8(ap->ctl, ioaddr->ctl_addr);
+        if (ap->ops->sff_set_devctl || ap->ioaddr.ctl_addr)
+                ata_sff_set_devctl(ap, ap->ctl);
 
         /* Under certain circumstances, some controllers raise IRQ on
          * ATA_NIEN manipulation.  Also, many controllers fail to mask
@@ -2301,8 +2320,8 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
         }
 
         /* set up device control */
-        if (ap->ioaddr.ctl_addr) {
-                iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+        if (ap->ops->sff_set_devctl || ap->ioaddr.ctl_addr) {
+                ata_sff_set_devctl(ap, ap->ctl);
                 ap->last_ctl = ap->ctl;
         }
 }
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 02c81f12c70..198307534d9 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -821,6 +821,18 @@ static void bfin_dev_select(struct ata_port *ap, unsigned int device)
 }
 
 /**
+ *      bfin_set_devctl - Write device control reg
+ *      @ap: port where the device is
+ *      @ctl: value to write
+ */
+
+static u8 bfin_set_devctl(struct ata_port *ap, u8 ctl)
+{
+        void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+        write_atapi_register(base, ATA_REG_CTRL, ctl);
+}
+
+/**
  *      bfin_bmdma_setup - Set up IDE DMA transaction
  *      @qc: Info associated with this ATA transaction.
  *
@@ -1240,32 +1252,6 @@ static unsigned char bfin_irq_on(struct ata_port *ap)
 }
 
 /**
- *      bfin_freeze - Freeze DMA controller port
- *      @ap: port to freeze
- *
- *      Note: Original code is ata_sff_freeze().
- */
-
-static void bfin_freeze(struct ata_port *ap)
-{
-        void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
-
-        dev_dbg(ap->dev, "in atapi dma freeze\n");
-        ap->ctl |= ATA_NIEN;
-        ap->last_ctl = ap->ctl;
-
-        write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
-
-        /* Under certain circumstances, some controllers raise IRQ on
-         * ATA_NIEN manipulation.  Also, many controllers fail to mask
-         * previously pending IRQ on ATA_NIEN assertion.  Clear it.
-         */
-        ap->ops->sff_check_status(ap);
-
-        bfin_irq_clear(ap);
-}
-
-/**
  *      bfin_thaw - Thaw DMA controller port
  *      @ap: port to thaw
  *
@@ -1476,6 +1462,7 @@ static struct ata_port_operations bfin_pata_ops = {
         .sff_check_status       = bfin_check_status,
         .sff_check_altstatus    = bfin_check_altstatus,
         .sff_dev_select         = bfin_dev_select,
+        .sff_set_devctl         = bfin_set_devctl,
 
         .bmdma_setup            = bfin_bmdma_setup,
         .bmdma_start            = bfin_bmdma_start,
@@ -1485,7 +1472,6 @@ static struct ata_port_operations bfin_pata_ops = {
 
         .qc_prep                = ata_noop_qc_prep,
 
-        .freeze                 = bfin_freeze,
         .thaw                   = bfin_thaw,
         .softreset              = bfin_softreset,
         .postreset              = bfin_postreset,
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 77ff829af17..86b25fef34a 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -416,6 +416,17 @@ static void scc_dev_select (struct ata_port *ap, unsigned int device)
 }
 
 /**
+ *      scc_set_devctl - Write device control reg
+ *      @ap: port where the device is
+ *      @ctl: value to write
+ */
+
+static void scc_set_devctl(struct ata_port *ap, u8 ctl)
+{
+        out_be32(ap->ioaddr.ctl_addr, ctl);
+}
+
+/**
  *      scc_bmdma_setup - Set up PCI IDE BMDMA transaction
  *      @qc: Info associated with this ATA transaction.
  *
@@ -840,31 +851,6 @@ static u8 scc_irq_on (struct ata_port *ap)
 }
 
 /**
- *      scc_freeze - Freeze BMDMA controller port
- *      @ap: port to freeze
- *
- *      Note: Original code is ata_sff_freeze().
- */
-
-static void scc_freeze (struct ata_port *ap)
-{
-        struct ata_ioports *ioaddr = &ap->ioaddr;
-
-        ap->ctl |= ATA_NIEN;
-        ap->last_ctl = ap->ctl;
-
-        out_be32(ioaddr->ctl_addr, ap->ctl);
-
-        /* Under certain circumstances, some controllers raise IRQ on
-         * ATA_NIEN manipulation.  Also, many controllers fail to mask
-         * previously pending IRQ on ATA_NIEN assertion.  Clear it.
-         */
-        ap->ops->sff_check_status(ap);
-
-        ap->ops->sff_irq_clear(ap);
-}
-
-/**
  *      scc_pata_prereset - prepare for reset
  *      @ap: ATA port to be reset
  *      @deadline: deadline jiffies for the operation
@@ -977,6 +963,7 @@ static struct ata_port_operations scc_pata_ops = {
         .sff_check_status       = scc_check_status,
         .sff_check_altstatus    = scc_check_altstatus,
         .sff_dev_select         = scc_dev_select,
+        .sff_set_devctl         = scc_set_devctl,
 
         .bmdma_setup            = scc_bmdma_setup,
         .bmdma_start            = scc_bmdma_start,
@@ -984,7 +971,6 @@ static struct ata_port_operations scc_pata_ops = {
         .bmdma_status           = scc_bmdma_status,
         .sff_data_xfer          = scc_data_xfer,
 
-        .freeze                 = scc_freeze,
         .prereset               = scc_pata_prereset,
         .softreset              = scc_softreset,
         .postreset              = scc_postreset,