1 files changed, 52 insertions, 99 deletions

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 723989d7f80..844e5e25213 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -33,6 +33,7 @@
 #include <linux/irq.h>
 #include <linux/bootmem.h>
 #include <linux/ioport.h>
+#include <linux/pci.h>
 
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
@@ -522,7 +523,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
  * success: return IRQ number (>=0)
  * failure: return < 0
  */
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 {
         unsigned int irq;
         unsigned int plat_gsi = gsi;
@@ -532,14 +533,14 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity)
          * Make sure all (legacy) PCI IRQs are set as level-triggered.
          */
         if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
-                if (triggering == ACPI_LEVEL_SENSITIVE)
+                if (trigger == ACPI_LEVEL_SENSITIVE)
                         eisa_set_level_irq(gsi);
         }
 #endif
 
 #ifdef CONFIG_X86_IO_APIC
         if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
-                plat_gsi = mp_register_gsi(gsi, triggering, polarity);
+                plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
         }
 #endif
         acpi_gsi_to_irq(plat_gsi, &irq);
@@ -903,10 +904,8 @@ extern int es7000_plat;
 #endif
 
 static struct {
-        int apic_id;
         int gsi_base;
         int gsi_end;
-        DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
 } mp_ioapic_routing[MAX_IO_APICS];
 
 int mp_find_ioapic(int gsi)
@@ -995,7 +994,6 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
          * Build basic GSI lookup table to facilitate gsi->io_apic lookups
          * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
          */
-        mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
         mp_ioapic_routing[idx].gsi_base = gsi_base;
         mp_ioapic_routing[idx].gsi_end = gsi_base +
             io_apic_get_redir_entries(idx);
@@ -1158,26 +1156,52 @@ void __init mp_config_acpi_legacy_irqs(void)
         }
 }
 
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
+                        int polarity)
 {
+#ifdef CONFIG_X86_MPPARSE
+        struct mpc_intsrc mp_irq;
+        struct pci_dev *pdev;
+        unsigned char number;
+        unsigned int devfn;
         int ioapic;
-        int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM     4096
-#define IRQ_COMPRESSION_START   64
+        u8 pin;
 
-        static int pci_irq = IRQ_COMPRESSION_START;
-        /*
-         * Mapping between Global System Interrupts, which
-         * represent all possible interrupts, and IRQs
-         * assigned to actual devices.
-         */
-        static int gsi_to_irq[MAX_GSI_NUM];
-#else
+        if (!acpi_ioapic)
+                return 0;
+        if (!dev)
+                return 0;
+        if (dev->bus != &pci_bus_type)
+                return 0;
+
+        pdev = to_pci_dev(dev);
+        number = pdev->bus->number;
+        devfn = pdev->devfn;
+        pin = pdev->pin;
+        /* print the entry should happen on mptable identically */
+        mp_irq.type = MP_INTSRC;
+        mp_irq.irqtype = mp_INT;
+        mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+                                (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+        mp_irq.srcbus = number;
+        mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+        ioapic = mp_find_ioapic(gsi);
+        mp_irq.dstapic = mp_ioapics[ioapic].apicid;
+        mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+        save_mp_irq(&mp_irq);
+#endif
+        return 0;
+}
+
+int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
+{
+        int ioapic;
+        int ioapic_pin;
+        struct io_apic_irq_attr irq_attr;
 
         if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
                 return gsi;
-#endif
 
         /* Don't set up the ACPI SCI because it's already set up */
         if (acpi_gbl_FADT.sci_interrupt == gsi)
@@ -1196,93 +1220,22 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
                 gsi = ioapic_renumber_irq(ioapic, gsi);
 #endif
 
-        /*
-         * Avoid pin reprogramming.  PRTs typically include entries
-         * with redundant pin->gsi mappings (but unique PCI devices);
-         * we only program the IOAPIC on the first.
-         */
         if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
                 printk(KERN_ERR "Invalid reference to IOAPIC pin "
-                       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+                       "%d-%d\n", mp_ioapics[ioapic].apicid,
                        ioapic_pin);
                 return gsi;
         }
-        if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
-                pr_debug("Pin %d-%d already programmed\n",
-                         mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
-                return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
-                return gsi;
-#endif
-        }
-
-        set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
-        /*
-         * For GSI >= 64, use IRQ compression
-         */
-        if ((gsi >= IRQ_COMPRESSION_START)
-            && (triggering == ACPI_LEVEL_SENSITIVE)) {
-                /*
-                 * For PCI devices assign IRQs in order, avoiding gaps
-                 * due to unused I/O APIC pins.
-                 */
-                int irq = gsi;
-                if (gsi < MAX_GSI_NUM) {
-                        /*
-                         * Retain the VIA chipset work-around (gsi > 15), but
-                         * avoid a problem where the 8254 timer (IRQ0) is setup
-                         * via an override (so it's not on pin 0 of the ioapic),
-                         * and at the same time, the pin 0 interrupt is a PCI
-                         * type.  The gsi > 15 test could cause these two pins
-                         * to be shared as IRQ0, and they are not shareable.
-                         * So test for this condition, and if necessary, avoid
-                         * the pin collision.
-                         */
-                        gsi = pci_irq++;
-                        /*
-                         * Don't assign IRQ used by ACPI SCI
-                         */
-                        if (gsi == acpi_gbl_FADT.sci_interrupt)
-                                gsi = pci_irq++;
-                        gsi_to_irq[irq] = gsi;
-                } else {
-                        printk(KERN_ERR "GSI %u is too high\n", gsi);
-                        return gsi;
-                }
-        }
-#endif
-        io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-                                triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
-                                polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-        return gsi;
-}
-
-int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
-                        u32 gsi, int triggering, int polarity)
-{
-#ifdef CONFIG_X86_MPPARSE
-        struct mpc_intsrc mp_irq;
-        int ioapic;
 
-        if (!acpi_ioapic)
-                return 0;
+        if (enable_update_mptable)
+                mp_config_acpi_gsi(dev, gsi, trigger, polarity);
 
-        /* print the entry should happen on mptable identically */
-        mp_irq.type = MP_INTSRC;
-        mp_irq.irqtype = mp_INT;
-        mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
-                                (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
-        mp_irq.srcbus = number;
-        mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
-        ioapic = mp_find_ioapic(gsi);
-        mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
-        mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+        set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
+                             trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
+                             polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+        io_apic_set_pci_routing(dev, gsi, &irq_attr);
 
-        save_mp_irq(&mp_irq);
-#endif
-        return 0;
+        return gsi;
 }
 
 /*