aboutsummaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/tqm8xx.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/tqm8xx.h')
-rw-r--r--arch/ppc/platforms/tqm8xx.h155
1 files changed, 0 insertions, 155 deletions
diff --git a/arch/ppc/platforms/tqm8xx.h b/arch/ppc/platforms/tqm8xx.h
deleted file mode 100644
index 662131d0eb3..00000000000
--- a/arch/ppc/platforms/tqm8xx.h
+++ /dev/null
@@ -1,155 +0,0 @@
1/*
2 * TQM8xx(L) board specific definitions
3 *
4 * Copyright (c) 1999-2002 Wolfgang Denk (wd@denx.de)
5 */
6
7#ifdef __KERNEL__
8#ifndef __MACH_TQM8xx_H
9#define __MACH_TQM8xx_H
10
11
12#include <asm/ppcboot.h>
13
14#ifndef __ASSEMBLY__
15#define TQM_IMMR_BASE 0xFFF00000 /* phys. addr of IMMR */
16#define TQM_IMAP_SIZE (64 * 1024) /* size of mapped area */
17
18#define IMAP_ADDR TQM_IMMR_BASE /* physical base address of IMMR area */
19#define IMAP_SIZE TQM_IMAP_SIZE /* mapped size of IMMR area */
20
21/*-----------------------------------------------------------------------
22 * PCMCIA stuff
23 *-----------------------------------------------------------------------
24 *
25 */
26#define PCMCIA_MEM_SIZE ( 64 << 20 )
27
28#ifndef CONFIG_KUP4K
29# define MAX_HWIFS 1 /* overwrite default in include/asm-ppc/ide.h */
30
31#else /* CONFIG_KUP4K */
32
33# define MAX_HWIFS 2 /* overwrite default in include/asm-ppc/ide.h */
34# ifndef __ASSEMBLY__
35# include <asm/8xx_immap.h>
36static __inline__ void ide_led(int on)
37{
38 volatile immap_t *immap = (immap_t *)IMAP_ADDR;
39
40 if (on) {
41 immap->im_ioport.iop_padat &= ~0x80;
42 } else {
43 immap->im_ioport.iop_padat |= 0x80;
44 }
45}
46# endif /* __ASSEMBLY__ */
47# define IDE_LED(x) ide_led((x))
48#endif /* CONFIG_KUP4K */
49
50/*
51 * Definitions for IDE0 Interface
52 */
53#define IDE0_BASE_OFFSET 0
54#define IDE0_DATA_REG_OFFSET (PCMCIA_MEM_SIZE + 0x320)
55#define IDE0_ERROR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 1)
56#define IDE0_NSECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 2)
57#define IDE0_SECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 3)
58#define IDE0_LCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 4)
59#define IDE0_HCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 5)
60#define IDE0_SELECT_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 6)
61#define IDE0_STATUS_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 7)
62#define IDE0_CONTROL_REG_OFFSET 0x0106
63#define IDE0_IRQ_REG_OFFSET 0x000A /* not used */
64
65/* define IO_BASE for PCMCIA */
66#define _IO_BASE 0x80000000
67#define _IO_BASE_SIZE (64<<10)
68
69#define FEC_INTERRUPT 9 /* = SIU_LEVEL4 */
70#define PHY_INTERRUPT 12 /* = IRQ6 */
71#define IDE0_INTERRUPT 13
72
73#ifdef CONFIG_IDE
74#endif
75
76/*-----------------------------------------------------------------------
77 * CPM Ethernet through SCCx.
78 *-----------------------------------------------------------------------
79 *
80 */
81
82/*** TQM823L, TQM850L ***********************************************/
83
84#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L)
85/* Bits in parallel I/O port registers that have to be set/cleared
86 * to configure the pins for SCC1 use.
87 */
88#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
89#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
90#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
91#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
92
93#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
94
95#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
96#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
97
98/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
99 * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
100 */
101#define SICR_ENET_MASK ((uint)0x0000ff00)
102#define SICR_ENET_CLKRT ((uint)0x00002600)
103#endif /* CONFIG_TQM823L, CONFIG_TQM850L */
104
105/*** TQM860L ********************************************************/
106
107#ifdef CONFIG_TQM860L
108/* Bits in parallel I/O port registers that have to be set/cleared
109 * to configure the pins for SCC1 use.
110 */
111#define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */
112#define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */
113#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
114#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
115
116#define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */
117#define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */
118#define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */
119
120/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
121 * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
122 */
123#define SICR_ENET_MASK ((uint)0x000000ff)
124#define SICR_ENET_CLKRT ((uint)0x00000026)
125#endif /* CONFIG_TQM860L */
126
127/*** FPS850L *********************************************************/
128
129#ifdef CONFIG_FPS850L
130/* Bits in parallel I/O port registers that have to be set/cleared
131 * to configure the pins for SCC1 use.
132 */
133#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
134#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
135#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
136#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
137
138#define PC_ENET_TENA ((ushort)0x0002) /* PC 14 */
139#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
140#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
141
142/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
143 * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
144 */
145#define SICR_ENET_MASK ((uint)0x0000ff00)
146#define SICR_ENET_CLKRT ((uint)0x00002600)
147#endif /* CONFIG_FPS850L */
148
149/* We don't use the 8259.
150*/
151#define NR_8259_INTS 0
152
153#endif /* !__ASSEMBLY__ */
154#endif /* __MACH_TQM8xx_H */
155#endif /* __KERNEL__ */
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-17 20:19:31 -0400