8 files changed, 276 insertions, 172 deletions

diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c
index fb7d4855ea6..11ab3836aac 100644
--- a/arch/cris/arch-v10/drivers/axisflashmap.c
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
@@ -11,6 +11,9 @@
  * partition split defined below.
  *
  * $Log: axisflashmap.c,v $
+ * Revision 1.11  2004/11/15 10:27:14  starvik
+ * Corrected typo (Thanks to Milton Miller <miltonm@bga.com>).
+ *
  * Revision 1.10  2004/08/16 12:37:22  starvik
  * Merge of Linux 2.6.8
  *
@@ -161,7 +164,7 @@
 #elif CONFIG_ETRAX_FLASH_BUSWIDTH==2
 #define flash_data __u16
 #elif CONFIG_ETRAX_FLASH_BUSWIDTH==4
-#define flash_data __u16
+#define flash_data __u32
 #endif
 
 /* From head.S */
diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c
index fba530fcfae..10795f67f68 100644
--- a/arch/cris/arch-v10/drivers/ds1302.c
+++ b/arch/cris/arch-v10/drivers/ds1302.c
@@ -7,6 +7,15 @@
 *! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init
 *!
 *! $Log: ds1302.c,v $
+*! Revision 1.18  2005/01/24 09:11:26  mikaelam
+*! Minor changes to get DS1302 RTC chip driver to work
+*!
+*! Revision 1.17  2005/01/05 06:11:22  starvik
+*! No need to do local_irq_disable after local_irq_save.
+*!
+*! Revision 1.16  2004/12/13 12:21:52  starvik
+*! Added I/O and DMA allocators from Linux 2.4
+*!
 *! Revision 1.14  2004/08/24 06:48:43  starvik
 *! Whitespace cleanup
 *!
@@ -124,9 +133,9 @@
 *!
 *! ---------------------------------------------------------------------------
 *!
-*! (C) Copyright 1999, 2000, 2001  Axis Communications AB, LUND, SWEDEN
+*! (C) Copyright 1999, 2000, 2001, 2002, 2003, 2004  Axis Communications AB, LUND, SWEDEN
 *!
-*! $Id: ds1302.c,v 1.14 2004/08/24 06:48:43 starvik Exp $
+*! $Id: ds1302.c,v 1.18 2005/01/24 09:11:26 mikaelam Exp $
 *!
 *!***************************************************************************/
 
@@ -145,6 +154,7 @@
 #include <asm/arch/svinto.h>
 #include <asm/io.h>
 #include <asm/rtc.h>
+#include <asm/arch/io_interface_mux.h>
 
 #define RTC_MAJOR_NR 121 /* local major, change later */
 
@@ -320,7 +330,6 @@ get_rtc_time(struct rtc_time *rtc_tm)
         unsigned long flags;
 
         local_irq_save(flags);
-        local_irq_disable();
 
         rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
         rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
@@ -358,7 +367,7 @@ static int
 rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
           unsigned long arg) 
 {
-        unsigned long flags;
+        unsigned long flags;
 
         switch(cmd) {
                 case RTC_RD_TIME:       /* read the time/date from RTC  */
@@ -382,7 +391,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
                                 return -EPERM;
 
                         if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, sizeof(struct rtc_time)))
-                                return -EFAULT;         
+                                return -EFAULT;
 
                         yrs = rtc_tm.tm_year + 1900;
                         mon = rtc_tm.tm_mon + 1;   /* tm_mon starts at zero */
@@ -419,7 +428,6 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
                         BIN_TO_BCD(yrs);
 
                         local_irq_save(flags);
-                        local_irq_disable();
                         CMOS_WRITE(yrs, RTC_YEAR);
                         CMOS_WRITE(mon, RTC_MONTH);
                         CMOS_WRITE(day, RTC_DAY_OF_MONTH);
@@ -438,7 +446,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
                 case RTC_SET_CHARGE: /* set the RTC TRICKLE CHARGE register */
                 {
-                        int tcs_val;                        
+                        int tcs_val;
 
                         if (!capable(CAP_SYS_TIME))
                                 return -EPERM;
@@ -492,8 +500,8 @@ print_rtc_status(void)
 /* The various file operations we support. */
 
 static struct file_operations rtc_fops = {
-        .owner          = THIS_MODULE,
-        .ioctl          = rtc_ioctl,    
+        .owner =        THIS_MODULE,
+        .ioctl =        rtc_ioctl,
 }; 
 
 /* Probe for the chip by writing something to its RAM and try reading it back. */
@@ -532,7 +540,7 @@ ds1302_probe(void)
                        "PB",
 #endif
                        CONFIG_ETRAX_DS1302_RSTBIT);
-                print_rtc_status();
+                       print_rtc_status();
                 retval = 1;
         } else {
                 stop();
@@ -548,7 +556,9 @@ ds1302_probe(void)
 int __init
 ds1302_init(void) 
 {
+#ifdef CONFIG_ETRAX_I2C
         i2c_init();
+#endif
 
         if (!ds1302_probe()) {
 #ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
@@ -558,25 +568,42 @@ ds1302_init(void)
                  *
                  * Make sure that R_GEN_CONFIG is setup correct.
                  */
-                genconfig_shadow = ((genconfig_shadow &
-                                     ~IO_MASK(R_GEN_CONFIG, ata)) | 
-                                   (IO_STATE(R_GEN_CONFIG, ata, select)));    
-                *R_GEN_CONFIG = genconfig_shadow;
+                /* Allocating the ATA interface will grab almost all
+                 * pins in I/O groups a, b, c and d.  A consequence of
+                 * allocating the ATA interface is that the fixed
+                 * interfaces shared RAM, parallel port 0, parallel
+                 * port 1, parallel port W, SCSI-8 port 0, SCSI-8 port
+                 * 1, SCSI-W, serial port 2, serial port 3,
+                 * synchronous serial port 3 and USB port 2 and almost
+                 * all GPIO pins on port g cannot be used.
+                 */
+                if (cris_request_io_interface(if_ata, "ds1302/ATA")) {
+                        printk(KERN_WARNING "ds1302: Failed to get IO interface\n");
+                        return -1;
+                }
+
 #elif CONFIG_ETRAX_DS1302_RSTBIT == 0
-                
-                /* Set the direction of this bit to out. */             
-                genconfig_shadow = ((genconfig_shadow &
-                                     ~IO_MASK(R_GEN_CONFIG, g0dir)) | 
-                                   (IO_STATE(R_GEN_CONFIG, g0dir, out)));    
-                *R_GEN_CONFIG = genconfig_shadow;
+                if (cris_io_interface_allocate_pins(if_gpio_grp_a,
+                                                    'g',
+                                                    CONFIG_ETRAX_DS1302_RSTBIT,
+                                                    CONFIG_ETRAX_DS1302_RSTBIT)) {
+                        printk(KERN_WARNING "ds1302: Failed to get IO interface\n");
+                        return -1;
+                }
+
+                /* Set the direction of this bit to out. */
+                genconfig_shadow = ((genconfig_shadow &
+                                     ~IO_MASK(R_GEN_CONFIG, g0dir)) |
+                                   (IO_STATE(R_GEN_CONFIG, g0dir, out)));
+                *R_GEN_CONFIG = genconfig_shadow;
 #endif
                 if (!ds1302_probe()) {
                         printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name);
-                        return -1;
+                        return -1;
                 }
 #else
                 printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name);
-                return -1;
+                return -1;
 #endif
         }
         /* Initialise trickle charger */
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
index 316ca15d680..512f16dec06 100644
--- a/arch/cris/arch-v10/drivers/eeprom.c
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -20,6 +20,12 @@
 *!                                  in the spin-lock.
 *!
 *!  $Log: eeprom.c,v $
+*!  Revision 1.12  2005/06/19 17:06:46  starvik
+*!  Merge of Linux 2.6.12.
+*!
+*!  Revision 1.11  2005/01/26 07:14:46  starvik
+*!  Applied diff from kernel janitors (Nish Aravamudan).
+*!
 *!  Revision 1.10  2003/09/11 07:29:48  starvik
 *!  Merge of Linux 2.6.0-test5
 *!
@@ -94,6 +100,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/wait.h>
 #include <asm/uaccess.h>
 #include "i2c.h"
 
@@ -526,15 +533,10 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t
     return -EFAULT;
   }
   
-  while(eeprom.busy)
-  {
-    interruptible_sleep_on(&eeprom.wait_q);
+  wait_event_interruptible(eeprom.wait_q, !eeprom.busy);
+  if (signal_pending(current))
+    return -EINTR;
 
-    /* bail out if we get interrupted */
-    if (signal_pending(current))
-      return -EINTR;
-    
-  }
   eeprom.busy++;
 
   page = (unsigned char) (p >> 8);
@@ -604,13 +606,10 @@ static ssize_t eeprom_write(struct file * file, const char * buf, size_t count,
     return -EFAULT;
   }
 
-  while(eeprom.busy)
-  {
-    interruptible_sleep_on(&eeprom.wait_q);
-    /* bail out if we get interrupted */
-    if (signal_pending(current))
-      return -EINTR;
-  }
+  wait_event_interruptible(eeprom.wait_q, !eeprom.busy);
+  /* bail out if we get interrupted */
+  if (signal_pending(current))
+    return -EINTR;
   eeprom.busy++;
   for(i = 0; (i < EEPROM_RETRIES) && (restart > 0); i++)
   {
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c
index c095de82a0d..09963fe299a 100644
--- a/arch/cris/arch-v10/drivers/gpio.c
+++ b/arch/cris/arch-v10/drivers/gpio.c
@@ -1,4 +1,4 @@
-/* $Id: gpio.c,v 1.12 2004/08/24 07:19:59 starvik Exp $
+/* $Id: gpio.c,v 1.17 2005/06/19 17:06:46 starvik Exp $
  *
  * Etrax general port I/O device
  *
@@ -9,6 +9,18 @@
  *             Johan Adolfsson  (read/set directions, write, port G)
  *
  * $Log: gpio.c,v $
+ * Revision 1.17  2005/06/19 17:06:46  starvik
+ * Merge of Linux 2.6.12.
+ *
+ * Revision 1.16  2005/03/07 13:02:29  starvik
+ * Protect driver global states with spinlock
+ *
+ * Revision 1.15  2005/01/05 06:08:55  starvik
+ * No need to do local_irq_disable after local_irq_save.
+ *
+ * Revision 1.14  2004/12/13 12:21:52  starvik
+ * Added I/O and DMA allocators from Linux 2.4
+ *
  * Revision 1.12  2004/08/24 07:19:59  starvik
  * Whitespace cleanup
  *
@@ -142,6 +154,7 @@
 #include <asm/io.h>
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/arch/io_interface_mux.h>
 
 #define GPIO_MAJOR 120  /* experimental MAJOR number */
 
@@ -194,6 +207,8 @@ static struct gpio_private *alarmlist = 0;
 static int gpio_some_alarms = 0; /* Set if someone uses alarm */
 static unsigned long gpio_pa_irq_enabled_mask = 0;
 
+static DEFINE_SPINLOCK(gpio_lock); /* Protect directions etc */
+
 /* Port A and B use 8 bit access, but Port G is 32 bit */
 #define NUM_PORTS (GPIO_MINOR_B+1)
 
@@ -241,6 +256,9 @@ static volatile unsigned char *dir_shadow[NUM_PORTS] = {
         &port_pb_dir_shadow 
 };
 
+/* All bits in port g that can change dir. */
+static const unsigned long int changeable_dir_g_mask = 0x01FFFF01;
+
 /* Port G is 32 bit, handle it special, some bits are both inputs 
    and outputs at the same time, only some of the bits can change direction
    and some of them in groups of 8 bit. */
@@ -260,6 +278,7 @@ gpio_poll(struct file *file,
         unsigned int mask = 0;
         struct gpio_private *priv = (struct gpio_private *)file->private_data;
         unsigned long data;
+        spin_lock(&gpio_lock);
         poll_wait(file, &priv->alarm_wq, wait);
         if (priv->minor == GPIO_MINOR_A) {
                 unsigned long flags;
@@ -270,10 +289,10 @@ gpio_poll(struct file *file,
                  */
                 tmp = ~data & priv->highalarm & 0xFF;
                 tmp = (tmp << R_IRQ_MASK1_SET__pa0__BITNR);
-                save_flags(flags); cli();
+                local_irq_save(flags);
                 gpio_pa_irq_enabled_mask |= tmp;
                 *R_IRQ_MASK1_SET = tmp;
-                restore_flags(flags);
+                local_irq_restore(flags);
 
         } else if (priv->minor == GPIO_MINOR_B)
                 data = *R_PORT_PB_DATA;
@@ -286,8 +305,11 @@ gpio_poll(struct file *file,
             (~data & priv->lowalarm)) {
                 mask = POLLIN|POLLRDNORM;
         }
+
+        spin_unlock(&gpio_lock);
         
         DP(printk("gpio_poll ready: mask 0x%08X\n", mask));
+
         return mask;
 }
 
@@ -296,6 +318,7 @@ int etrax_gpio_wake_up_check(void)
         struct gpio_private *priv = alarmlist;
         unsigned long data = 0;
         int ret = 0;
+        spin_lock(&gpio_lock);
         while (priv) {
                 if (USE_PORTS(priv)) {
                         data = *priv->port;
@@ -310,6 +333,7 @@ int etrax_gpio_wake_up_check(void)
                 }
                 priv = priv->next;
         }
+        spin_unlock(&gpio_lock);
         return ret;
 }
 
@@ -327,6 +351,7 @@ static irqreturn_t
 gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
         unsigned long tmp;
+        spin_lock(&gpio_lock);
         /* Find what PA interrupts are active */
         tmp = (*R_IRQ_READ1);
 
@@ -337,6 +362,8 @@ gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
         *R_IRQ_MASK1_CLR = tmp;
         gpio_pa_irq_enabled_mask &= ~tmp;
 
+        spin_unlock(&gpio_lock);
+
         if (gpio_some_alarms) {
                 return IRQ_RETVAL(etrax_gpio_wake_up_check());
         }
@@ -350,6 +377,9 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
         struct gpio_private *priv = (struct gpio_private *)file->private_data;
         unsigned char data, clk_mask, data_mask, write_msb;
         unsigned long flags;
+
+        spin_lock(&gpio_lock);
+
         ssize_t retval = count;
         if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) {
                 return -EFAULT;
@@ -372,7 +402,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
                 data = *buf++;
                 if (priv->write_msb) {
                         for (i = 7; i >= 0;i--) {
-                                local_irq_save(flags); local_irq_disable();
+                                local_irq_save(flags);
                                 *priv->port = *priv->shadow &= ~clk_mask;
                                 if (data & 1<<i)
                                         *priv->port = *priv->shadow |= data_mask;
@@ -384,7 +414,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
                         }
                 } else {
                         for (i = 0; i <= 7;i++) {
-                                local_irq_save(flags); local_irq_disable();
+                                local_irq_save(flags);
                                 *priv->port = *priv->shadow &= ~clk_mask;
                                 if (data & 1<<i)
                                         *priv->port = *priv->shadow |= data_mask;
@@ -396,6 +426,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
                         }
                 }
         }
+        spin_unlock(&gpio_lock);
         return retval;
 }
 
@@ -452,9 +483,14 @@ gpio_open(struct inode *inode, struct file *filp)
 static int
 gpio_release(struct inode *inode, struct file *filp)
 {
-        struct gpio_private *p = alarmlist;
-        struct gpio_private *todel = (struct gpio_private *)filp->private_data;
-        
+        struct gpio_private *p;
+        struct gpio_private *todel;
+
+        spin_lock(&gpio_lock);
+
+        p = alarmlist;
+        todel = (struct gpio_private *)filp->private_data;
+
         /* unlink from alarmlist and free the private structure */
 
         if (p == todel) {
@@ -476,7 +512,7 @@ gpio_release(struct inode *inode, struct file *filp)
                 p = p->next;
         }
         gpio_some_alarms = 0;
-                
+        spin_unlock(&gpio_lock);
         return 0;
 }
 
@@ -491,14 +527,14 @@ unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
          */
         unsigned long flags;
         if (USE_PORTS(priv)) {
-                local_irq_save(flags); local_irq_disable();
+                local_irq_save(flags);
                 *priv->dir = *priv->dir_shadow &= 
                 ~((unsigned char)arg & priv->changeable_dir);
                 local_irq_restore(flags);
                 return ~(*priv->dir_shadow) & 0xFF; /* Only 8 bits */
         } else if (priv->minor == GPIO_MINOR_G) {
                 /* We must fiddle with R_GEN_CONFIG to change dir */
-                save_flags(flags); cli();
+                local_irq_save(flags);
                 if (((arg & dir_g_in_bits) != arg) && 
                     (arg & changeable_dir_g)) {
                         arg &= changeable_dir_g;
@@ -533,7 +569,7 @@ unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
                         /* Must be a >120 ns delay before writing this again */
                                 
                 }
-                restore_flags(flags);
+                local_irq_restore(flags);
                 return dir_g_in_bits;
         }
         return 0;
@@ -543,14 +579,14 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
 {
         unsigned long flags;
         if (USE_PORTS(priv)) {
-                local_irq_save(flags); local_irq_disable();
+                local_irq_save(flags);
                 *priv->dir = *priv->dir_shadow |= 
                   ((unsigned char)arg & priv->changeable_dir);
                 local_irq_restore(flags);
                 return *priv->dir_shadow;
         } else if (priv->minor == GPIO_MINOR_G) {
                 /* We must fiddle with R_GEN_CONFIG to change dir */                    
-                save_flags(flags); cli();
+                local_irq_save(flags);
                 if (((arg & dir_g_out_bits) != arg) &&
                     (arg & changeable_dir_g)) {
                         /* Set bits in genconfig to set to output */
@@ -583,7 +619,7 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
                         *R_GEN_CONFIG = genconfig_shadow;
                         /* Must be a >120 ns delay before writing this again */
                 }
-                restore_flags(flags);
+                local_irq_restore(flags);
                 return dir_g_out_bits & 0x7FFFFFFF;
         }
         return 0;
@@ -598,22 +634,26 @@ gpio_ioctl(struct inode *inode, struct file *file,
 {
         unsigned long flags;
         unsigned long val;
+        int ret = 0;
+
         struct gpio_private *priv = (struct gpio_private *)file->private_data;
         if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) {
                 return -EINVAL;
         }
 
+        spin_lock(&gpio_lock);
+
         switch (_IOC_NR(cmd)) {
         case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
                 // read the port
                 if (USE_PORTS(priv)) {
-                        return *priv->port;
+                        ret =  *priv->port;
                 } else if (priv->minor == GPIO_MINOR_G) {
-                        return (*R_PORT_G_DATA) & 0x7FFFFFFF;
+                        ret =  (*R_PORT_G_DATA) & 0x7FFFFFFF;
                 }
                 break;
         case IO_SETBITS:
-                local_irq_save(flags); local_irq_disable();
+                local_irq_save(flags);
                 // set changeable bits with a 1 in arg
                 if (USE_PORTS(priv)) {
                         *priv->port = *priv->shadow |= 
@@ -624,7 +664,7 @@ gpio_ioctl(struct inode *inode, struct file *file,
                 local_irq_restore(flags);
                 break;
         case IO_CLRBITS:
-                local_irq_save(flags); local_irq_disable();
+                local_irq_save(flags);
                 // clear changeable bits with a 1 in arg
                 if (USE_PORTS(priv)) {
                         *priv->port = *priv->shadow &= 
@@ -666,33 +706,34 @@ gpio_ioctl(struct inode *inode, struct file *file,
         case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
                 /* Read direction 0=input 1=output */
                 if (USE_PORTS(priv)) {
-                        return *priv->dir_shadow;
+                        ret = *priv->dir_shadow;
                 } else if (priv->minor == GPIO_MINOR_G) {
                         /* Note: Some bits are both in and out,
                          * Those that are dual is set here as well.
                          */
-                        return (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
+                        ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
                 }
+                break;
         case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
                 /* Set direction 0=unchanged 1=input, 
                  * return mask with 1=input 
                  */
-                return setget_input(priv, arg) & 0x7FFFFFFF;
+                ret = setget_input(priv, arg) & 0x7FFFFFFF;
                 break;
         case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
                 /* Set direction 0=unchanged 1=output, 
                  * return mask with 1=output 
                  */
-                return setget_output(priv, arg) & 0x7FFFFFFF;
-
+                ret =  setget_output(priv, arg) & 0x7FFFFFFF;
+                break;
         case IO_SHUTDOWN:
                 SOFT_SHUTDOWN();
                 break;
         case IO_GET_PWR_BT:
 #if defined (CONFIG_ETRAX_SOFT_SHUTDOWN)
-                return (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
+                ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
 #else
-                return 0;
+                ret = 0;
 #endif
                 break;
         case IO_CFG_WRITE_MODE:
@@ -709,7 +750,7 @@ gpio_ioctl(struct inode *inode, struct file *file,
                 {
                         priv->clk_mask = 0;
                         priv->data_mask = 0;
-                        return -EPERM;
+                        ret = -EPERM;
                 }
                 break;
         case IO_READ_INBITS: 
@@ -720,8 +761,7 @@ gpio_ioctl(struct inode *inode, struct file *file,
                         val = *R_PORT_G_DATA;
                 }
                 if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
-                        return -EFAULT;
-                return 0;
+                        ret = -EFAULT;
                 break;
         case IO_READ_OUTBITS:
                  /* *arg is result of reading the output shadow */
@@ -731,36 +771,43 @@ gpio_ioctl(struct inode *inode, struct file *file,
                         val = port_g_data_shadow;
                 }
                 if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
-                        return -EFAULT;
+                        ret = -EFAULT;
                 break;
         case IO_SETGET_INPUT: 
                 /* bits set in *arg is set to input,
                  * *arg updated with current input pins.
                  */
                 if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
-                        return -EFAULT;
+                {
+                        ret = -EFAULT;
+                        break;
+                }
                 val = setget_input(priv, val);
                 if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
-                        return -EFAULT;
+                        ret = -EFAULT;
                 break;
         case IO_SETGET_OUTPUT:
                 /* bits set in *arg is set to output,
                  * *arg updated with current output pins.
                  */
                 if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
-                        return -EFAULT;
+                {
+                        ret = -EFAULT;
+                        break;
+                }
                 val = setget_output(priv, val);
                 if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
-                        return -EFAULT;
+                        ret = -EFAULT;
                 break;
         default:
                 if (priv->minor == GPIO_MINOR_LEDS)
-                        return gpio_leds_ioctl(cmd, arg);
+                        ret = gpio_leds_ioctl(cmd, arg);
                 else
-                        return -EINVAL;
+                        ret = -EINVAL;
         } /* switch */
-        
-        return 0;
+
+        spin_unlock(&gpio_lock);
+        return ret;
 }
 
 static int
@@ -802,60 +849,20 @@ struct file_operations gpio_fops = {
 };
 
 
-static void __init gpio_init_port_g(void)
+void ioif_watcher(const unsigned int gpio_in_available,
+                  const unsigned int gpio_out_available,
+                  const unsigned char pa_available,
+                  const unsigned char pb_available)
 {
-#define GROUPA (0x0000FF3F)
-#define GROUPB (1<<6 | 1<<7)
-#define GROUPC (1<<30 | 1<<31)
-#define GROUPD (0x3FFF0000)
-#define GROUPD_LOW (0x00FF0000)
-        unsigned long used_in_bits = 0;
-        unsigned long used_out_bits = 0;
-        if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0, select)){
-                used_in_bits  |= GROUPA | GROUPB | 0 | 0;
-                used_out_bits |= GROUPA | GROUPB | 0 | 0;
-        }
-        if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ata, select)) {
-                used_in_bits  |= GROUPA | GROUPB | GROUPC | (GROUPD & ~(1<<25|1<<26));
-                used_out_bits |= GROUPA | GROUPB | GROUPC | GROUPD;
-        }
+        unsigned long int flags;
+        D(printk("gpio.c: ioif_watcher called\n"));
+        D(printk("gpio.c: G in: 0x%08x G out: 0x%08x PA: 0x%02x PB: 0x%02x\n",
+                 gpio_in_available, gpio_out_available, pa_available, pb_available));
 
-        if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par0, select)) {
-                used_in_bits  |= (GROUPA & ~(1<<0)) | 0 | 0 | 0;
-                used_out_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0;
-        }
-        if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser2, select)) {
-                used_in_bits  |= 0 | GROUPB | 0 | 0;
-                used_out_bits |= 0 | GROUPB | 0 | 0;
-        }
-        /* mio same as shared RAM ? */
-        if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio, select)) {
-                used_in_bits  |= (GROUPA & ~(1<<0)) | 0 |0 |GROUPD_LOW;
-                used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 |0 |GROUPD_LOW;
-        }
-        if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi1, select)) {
-                used_in_bits  |= 0 | 0 | GROUPC | GROUPD;
-                used_out_bits |= 0 | 0 | GROUPC | GROUPD;
-        }
-        if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0w, select)) {
-                used_in_bits  |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24);
-                used_out_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24 | 1<<25|1<<26);
-        }
+        spin_lock_irqsave(&gpio_lock, flags);
 
-        if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par1, select)) {
-                used_in_bits  |= 0 | 0 | 0 | (GROUPD & ~(1<<24));
-                used_out_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24));
-        }
-        if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser3, select)) {
-                used_in_bits  |= 0 | 0 | GROUPC | 0;
-                used_out_bits |= 0 | 0 | GROUPC | 0;
-        }
-        /* mio same as shared RAM-W? */
-        if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio_w, select)) {
-                used_in_bits  |= (GROUPA & ~(1<<0)) | 0 | 0 |GROUPD_LOW;
-                used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 | 0 |GROUPD_LOW;
-        }
-        /* TODO: USB p2, parw, sync ser3? */
+        dir_g_in_bits = gpio_in_available;
+        dir_g_out_bits = gpio_out_available;
 
         /* Initialise the dir_g_shadow etc. depending on genconfig */
         /* 0=input 1=output */
@@ -868,10 +875,7 @@ static void __init gpio_init_port_g(void)
         if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g24dir, out))
                 dir_g_shadow |= (1 << 24);
 
-        dir_g_in_bits = ~used_in_bits;
-        dir_g_out_bits = ~used_out_bits;
-
-        changeable_dir_g = 0x01FFFF01; /* all that can change dir */
+        changeable_dir_g = changeable_dir_g_mask;
         changeable_dir_g &= dir_g_out_bits;
         changeable_dir_g &= dir_g_in_bits;
         /* Correct the bits that can change direction */ 
@@ -880,6 +884,7 @@ static void __init gpio_init_port_g(void)
         dir_g_in_bits &= ~changeable_dir_g;
         dir_g_in_bits |= (~dir_g_shadow & changeable_dir_g);
 
+        spin_unlock_irqrestore(&gpio_lock, flags);
 
         printk(KERN_INFO "GPIO port G: in_bits: 0x%08lX out_bits: 0x%08lX val: %08lX\n",
                dir_g_in_bits, dir_g_out_bits, (unsigned long)*R_PORT_G_DATA);
@@ -896,6 +901,7 @@ gpio_init(void)
 #if defined (CONFIG_ETRAX_CSP0_LEDS)
         int i;
 #endif
+        printk("gpio init\n");
 
         /* do the formalities */
 
@@ -919,8 +925,13 @@ gpio_init(void)
 #endif
 
 #endif
-        gpio_init_port_g();
-        printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002 Axis Communications AB\n");
+        /* The I/O interface allocation watcher will be called when
+         * registering it. */
+        if (cris_io_interface_register_watcher(ioif_watcher)){
+                printk(KERN_WARNING "gpio_init: Failed to install IO if allocator watcher\n");
+        }
+
+        printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002, 2003, 2004 Axis Communications AB\n");
         /* We call etrax_gpio_wake_up_check() from timer interrupt and
          * from cpu_idle() in kernel/process.c
          * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms
diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
index 8bbe233ba7b..b38267d60d3 100644
--- a/arch/cris/arch-v10/drivers/i2c.c
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -12,6 +12,15 @@
 *!                                 don't use PB_I2C if DS1302 uses same bits,
 *!                                 use PB.
 *! $Log: i2c.c,v $
+*! Revision 1.13  2005/03/07 13:13:07  starvik
+*! Added spinlocks to protect states etc
+*!
+*! Revision 1.12  2005/01/05 06:11:22  starvik
+*! No need to do local_irq_disable after local_irq_save.
+*!
+*! Revision 1.11  2004/12/13 12:21:52  starvik
+*! Added I/O and DMA allocators from Linux 2.4
+*!
 *! Revision 1.9  2004/08/24 06:49:14  starvik
 *! Whitespace cleanup
 *!
@@ -75,7 +84,7 @@
 *! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN
 *!
 *!***************************************************************************/
-/* $Id: i2c.c,v 1.9 2004/08/24 06:49:14 starvik Exp $ */
+/* $Id: i2c.c,v 1.13 2005/03/07 13:13:07 starvik Exp $ */
 
 /****************** INCLUDE FILES SECTION ***********************************/
 
@@ -95,6 +104,7 @@
 #include <asm/arch/svinto.h>
 #include <asm/io.h>
 #include <asm/delay.h>
+#include <asm/arch/io_interface_mux.h>
 
 #include "i2c.h"
 
@@ -184,6 +194,7 @@ static const char i2c_name[] = "i2c";
 
 #define i2c_delay(usecs) udelay(usecs)
 
+static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */
 
 /****************** FUNCTION DEFINITION SECTION *************************/
 
@@ -488,13 +499,14 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
         int error, cntr = 3;
         unsigned long flags;
 
+        spin_lock(&i2c_lock);
+
         do {
                 error = 0;
                 /*
                  * we don't like to be interrupted
                  */
                 local_irq_save(flags);
-                local_irq_disable();
 
                 i2c_start();
                 /*
@@ -538,6 +550,8 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
 
         i2c_delay(CLOCK_LOW_TIME);
 
+        spin_unlock(&i2c_lock);
+
         return -error;
 }
 
@@ -555,13 +569,14 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
         int error, cntr = 3;
         unsigned long flags;
 
+        spin_lock(&i2c_lock);
+
         do {
                 error = 0;
                 /*
                  * we don't like to be interrupted
                  */
                 local_irq_save(flags);
-                local_irq_disable();
                 /*
                  * generate start condition
                  */
@@ -620,6 +635,8 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
                 
         } while(error && cntr--);
 
+        spin_unlock(&i2c_lock);
+
         return b;
 }
 
@@ -686,15 +703,26 @@ static struct file_operations i2c_fops = {
 int __init
 i2c_init(void)
 {
+        static int res = 0;
+        static int first = 1;
+
+        if (!first) {
+                return res;
+        }
+
         /* Setup and enable the Port B I2C interface */
 
 #ifndef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
+        if ((res = cris_request_io_interface(if_i2c, "I2C"))) {
+                printk(KERN_CRIT "i2c_init: Failed to get IO interface\n");
+                return res;
+        }
+
         *R_PORT_PB_I2C = port_pb_i2c_shadow |= 
                 IO_STATE(R_PORT_PB_I2C, i2c_en,  on) |
                 IO_FIELD(R_PORT_PB_I2C, i2c_d,   1)  |
                 IO_FIELD(R_PORT_PB_I2C, i2c_clk, 1)  |
                 IO_STATE(R_PORT_PB_I2C, i2c_oe_, enable);
-#endif
 
         port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir0);
         port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir1);
@@ -702,8 +730,26 @@ i2c_init(void)
         *R_PORT_PB_DIR = (port_pb_dir_shadow |=
                           IO_STATE(R_PORT_PB_DIR, dir0, input)  |
                           IO_STATE(R_PORT_PB_DIR, dir1, output));
+#else
+        if ((res = cris_io_interface_allocate_pins(if_i2c,
+                                                   'b',
+                                                   CONFIG_ETRAX_I2C_DATA_PORT,
+                                                   CONFIG_ETRAX_I2C_DATA_PORT))) {
+                printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C data port\n");
+                return res;
+        } else if ((res = cris_io_interface_allocate_pins(if_i2c,
+                                                          'b',
+                                                          CONFIG_ETRAX_I2C_CLK_PORT,
+                                                          CONFIG_ETRAX_I2C_CLK_PORT))) {
+                cris_io_interface_free_pins(if_i2c,
+                                            'b',
+                                            CONFIG_ETRAX_I2C_DATA_PORT,
+                                            CONFIG_ETRAX_I2C_DATA_PORT);
+                printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C clk port\n");
+        }
+#endif
 
-        return 0;
+        return res;
 }
 
 static int __init
@@ -711,14 +757,16 @@ i2c_register(void)
 {
         int res;
 
-        i2c_init();
+        res = i2c_init();
+        if (res < 0)
+                return res;
         res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
         if(res < 0) {
                 printk(KERN_ERR "i2c: couldn't get a major number.\n");
                 return res;
         }
 
-        printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n");
+        printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n");
         
         return 0;
 }
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index b3dfdf7b8fc..201f4c90d96 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -15,7 +15,7 @@
  *
  * Author: Tobias Anderberg <tobiasa@axis.com>.
  *
- * $Id: pcf8563.c,v 1.8 2004/08/24 06:42:51 starvik Exp $
+ * $Id: pcf8563.c,v 1.11 2005/03/07 13:13:07 starvik Exp $
  */
 
 #include <linux/config.h>
@@ -40,7 +40,7 @@
 #define PCF8563_MAJOR 121               /* Local major number. */
 #define DEVICE_NAME "rtc"               /* Name which is registered in /proc/devices. */
 #define PCF8563_NAME "PCF8563"
-#define DRIVER_VERSION "$Revision: 1.8 $"
+#define DRIVER_VERSION "$Revision: 1.11 $"
 
 /* I2C bus slave registers. */
 #define RTC_I2C_READ            0xa3
@@ -49,6 +49,8 @@
 /* Two simple wrapper macros, saves a few keystrokes. */
 #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
 #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
+
+static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */
         
 static const unsigned char days_in_month[] =
         { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
@@ -125,9 +127,12 @@ get_rtc_time(struct rtc_time *tm)
 int __init
 pcf8563_init(void)
 {
-        unsigned char ret;
+        int ret;
 
-        i2c_init();
+        if ((ret = i2c_init())) {
+                printk(KERN_CRIT "pcf8563_init: failed to init i2c\n");
+                return ret;
+        }
 
         /*
          * First of all we need to reset the chip. This is done by
@@ -200,12 +205,15 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
                         {
                                 struct rtc_time tm;
 
+                                spin_lock(&rtc_lock);
                                 get_rtc_time(&tm);
 
                                 if (copy_to_user((struct rtc_time *) arg, &tm, sizeof(struct rtc_time))) {
+                                        spin_unlock(&rtc_lock);
                                         return -EFAULT;
                                 }
 
+                                spin_unlock(&rtc_lock);
                                 return 0;
                         }
                         break;
@@ -250,6 +258,8 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
                                 BIN_TO_BCD(tm.tm_min);
                                 BIN_TO_BCD(tm.tm_sec);
                                 tm.tm_mon |= century;
+
+                                spin_lock(&rtc_lock);
                                 
                                 rtc_write(RTC_YEAR, tm.tm_year);
                                 rtc_write(RTC_MONTH, tm.tm_mon);
@@ -258,6 +268,8 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
                                 rtc_write(RTC_MINUTES, tm.tm_min);
                                 rtc_write(RTC_SECONDS, tm.tm_sec);
 
+                                spin_unlock(&rtc_lock);
+
                                 return 0;
 #endif /* !CONFIG_ETRAX_RTC_READONLY */
                         }
diff --git a/arch/cris/arch-v10/kernel/Makefile b/arch/cris/arch-v10/kernel/Makefile
index 52761603b6a..dcfec41d353 100644
--- a/arch/cris/arch-v10/kernel/Makefile
+++ b/arch/cris/arch-v10/kernel/Makefile
@@ -1,4 +1,4 @@
-# $Id: Makefile,v 1.5 2004/06/02 08:24:38 starvik Exp $
+# $Id: Makefile,v 1.6 2004/12/13 12:21:51 starvik Exp $
 #
 # Makefile for the linux kernel.
 #
@@ -7,7 +7,8 @@ extra-y	:= head.o
 
 
 obj-y   := entry.o traps.o shadows.o debugport.o irq.o \
-           process.o setup.o signal.o traps.o time.o ptrace.o
+           process.o setup.o signal.o traps.o time.o ptrace.o \
+           dma.o io_interface_mux.o
 
 obj-$(CONFIG_ETRAX_KGDB) += kgdb.o
 obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c
index 4717f7ae8e5..094ff45ae85 100644
--- a/arch/cris/arch-v10/kernel/fasttimer.c
+++ b/arch/cris/arch-v10/kernel/fasttimer.c
@@ -1,10 +1,20 @@
-/* $Id: fasttimer.c,v 1.6 2004/05/14 10:18:39 starvik Exp $
+/* $Id: fasttimer.c,v 1.9 2005/03/04 08:16:16 starvik Exp $
  * linux/arch/cris/kernel/fasttimer.c
  *
  * Fast timers for ETRAX100/ETRAX100LX
  * This may be useful in other OS than Linux so use 2 space indentation...
  *
  * $Log: fasttimer.c,v $
+ * Revision 1.9  2005/03/04 08:16:16  starvik
+ * Merge of Linux 2.6.11.
+ *
+ * Revision 1.8  2005/01/05 06:09:29  starvik
+ * cli()/sti() will be obsolete in 2.6.11.
+ *
+ * Revision 1.7  2005/01/03 13:35:46  starvik
+ * Removed obsolete stuff.
+ * Mark fast timer IRQ as not shared.
+ *
  * Revision 1.6  2004/05/14 10:18:39  starvik
  * Export fast_timer_list
  *
@@ -148,8 +158,7 @@ static int debug_log_cnt_wrapped = 0;
 #define DEBUG_LOG(string, value) \
 { \
   unsigned long log_flags; \
-  save_flags(log_flags); \
-  cli(); \
+  local_irq_save(log_flags); \
   debug_log_string[debug_log_cnt] = (string); \
   debug_log_value[debug_log_cnt] = (unsigned long)(value); \
   if (++debug_log_cnt >= DEBUG_LOG_MAX) \
@@ -157,7 +166,7 @@ static int debug_log_cnt_wrapped = 0;
     debug_log_cnt = debug_log_cnt % DEBUG_LOG_MAX; \
     debug_log_cnt_wrapped = 1; \
   } \
-  restore_flags(log_flags); \
+  local_irq_restore(log_flags); \
 }
 #else
 #define DEBUG_LOG(string, value)
@@ -320,8 +329,7 @@ void start_one_shot_timer(struct fast_timer *t,
 
   D1(printk("sft %s %d us\n", name, delay_us));
 
-  save_flags(flags);
-  cli();
+  local_irq_save(flags);
 
   do_gettimeofday_fast(&t->tv_set);
   tmp = fast_timer_list;
@@ -395,7 +403,7 @@ void start_one_shot_timer(struct fast_timer *t,
 
   D2(printk("start_one_shot_timer: %d us done\n", delay_us));
 
-  restore_flags(flags);
+  local_irq_restore(flags);
 } /* start_one_shot_timer */
 
 static inline int fast_timer_pending (const struct fast_timer * t)
@@ -425,11 +433,10 @@ int del_fast_timer(struct fast_timer * t)
   unsigned long flags;
   int ret;
   
-  save_flags(flags);
-  cli();
+  local_irq_save(flags);
   ret = detach_fast_timer(t);
   t->next = t->prev = NULL;
-  restore_flags(flags);
+  local_irq_restore(flags);
   return ret;
 } /* del_fast_timer */
 
@@ -444,8 +451,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
   struct fast_timer *t;
   unsigned long flags;
 
-  save_flags(flags);
-  cli();
+  local_irq_save(flags);
 
   /* Clear timer1 irq */
   *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr);
@@ -462,7 +468,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
   fast_timer_running = 0;
   fast_timer_ints++;
 
-  restore_flags(flags);
+  local_irq_restore(flags);
 
   t = fast_timer_list;
   while (t)
@@ -482,8 +488,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
       fast_timers_expired++;
 
       /* Remove this timer before call, since it may reuse the timer */
-      save_flags(flags);
-      cli();
+      local_irq_save(flags);
       if (t->prev)
       {
         t->prev->next = t->next;
@@ -498,7 +503,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
       }
       t->prev = NULL;
       t->next = NULL;
-      restore_flags(flags);
+      local_irq_restore(flags);
 
       if (t->function != NULL)
       {
@@ -515,8 +520,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
       D1(printk(".\n"));
     }
 
-    save_flags(flags);
-    cli();
+    local_irq_save(flags);
     if ((t = fast_timer_list) != NULL)
     {
       /* Start next timer.. */
@@ -535,7 +539,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
 #endif
           start_timer1(us);
         }
-        restore_flags(flags);
+        local_irq_restore(flags);
         break;
       }
       else
@@ -546,7 +550,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
         D1(printk("e! %d\n", us));
       }
     }
-    restore_flags(flags);
+    local_irq_restore(flags);
   }
 
   if (!t)
@@ -748,13 +752,12 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
 #endif
 
     used += sprintf(bigbuf + used, "Active timers:\n");
-    save_flags(flags);
-    cli();
+    local_irq_save(flags);
     t = fast_timer_list;
     while (t != NULL && (used+100 < BIG_BUF_SIZE))
     {
       nextt = t->next;
-      restore_flags(flags);
+      local_irq_restore(flags);
       used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
                       "d: %6li us data: 0x%08lX"
 /*                      " func: 0x%08lX" */
@@ -768,14 +771,14 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
                       t->data
 /*                      , t->function */
                       );
-      cli();
+      local_irq_disable();
       if (t->next != nextt)
       {
         printk(KERN_WARNING "timer removed!\n");
       }
       t = nextt;
     }
-    restore_flags(flags);
+    local_irq_restore(flags);
   }
 
   if (used - offset < len)
@@ -963,7 +966,7 @@ void fast_timer_init(void)
    if ((fasttimer_proc_entry = create_proc_entry( "fasttimer", 0, 0 )))
      fasttimer_proc_entry->read_proc = proc_fasttimer_read;
 #endif /* PROC_FS */
-    if(request_irq(TIMER1_IRQ_NBR, timer1_handler, SA_SHIRQ,
+    if(request_irq(TIMER1_IRQ_NBR, timer1_handler, 0,
                    "fast timer int", NULL))
     {
       printk("err: timer1 irq\n");