1 files changed, 167 insertions, 37 deletions

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 29e71ed6b8a..a949c4fbbdd 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -26,6 +26,7 @@ config BLACKFIN
         default y
         select HAVE_IDE
         select HAVE_OPROFILE
+        select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ZONE_DMA
         bool
@@ -59,10 +60,6 @@ config GENERIC_CALIBRATE_DELAY
         bool
         default y
 
-config HARDWARE_PM
-        def_bool y
-        depends on OPROFILE
-
 source "init/Kconfig"
 
 source "kernel/Kconfig.preempt"
@@ -77,6 +74,26 @@ choice
         prompt "CPU"
         default BF533
 
+config BF512
+        bool "BF512"
+        help
+          BF512 Processor Support.
+
+config BF514
+        bool "BF514"
+        help
+          BF514 Processor Support.
+
+config BF516
+        bool "BF516"
+        help
+          BF516 Processor Support.
+
+config BF518
+        bool "BF518"
+        help
+          BF518 Processor Support.
+
 config BF522
         bool "BF522"
         help
@@ -137,6 +154,16 @@ config BF537
         help
           BF537 Processor Support.
 
+config BF538
+        bool "BF538"
+        help
+          BF538 Processor Support.
+
+config BF539
+        bool "BF539"
+        help
+          BF539 Processor Support.
+
 config BF542
         bool "BF542"
         help
@@ -169,28 +196,55 @@ config BF561
 
 endchoice
 
+config SMP
+        depends on BF561
+        bool "Symmetric multi-processing support"
+        ---help---
+          This enables support for systems with more than one CPU,
+          like the dual core BF561. If you have a system with only one
+          CPU, say N. If you have a system with more than one CPU, say Y.
+
+          If you don't know what to do here, say N.
+
+config NR_CPUS
+        int
+        depends on SMP
+        default 2 if BF561
+
+config IRQ_PER_CPU
+        bool
+        depends on SMP
+        default y
+
+config TICK_SOURCE_SYSTMR0
+        bool
+        select BFIN_GPTIMERS
+        depends on SMP
+        default y
+
 config BF_REV_MIN
         int
-        default 0 if (BF52x || BF54x)
+        default 0 if (BF51x || BF52x || BF54x)
         default 2 if (BF537 || BF536 || BF534)
         default 3 if (BF561 ||BF533 || BF532 || BF531)
+        default 4 if (BF538 || BF539)
 
 config BF_REV_MAX
         int
-        default 2 if (BF52x || BF54x)
+        default 2 if (BF51x || BF52x || BF54x)
         default 3 if (BF537 || BF536 || BF534)
-        default 5 if (BF561)
+        default 5 if (BF561 || BF538 || BF539)
         default 6 if (BF533 || BF532 || BF531)
 
 choice
         prompt "Silicon Rev"
-        default BF_REV_0_1 if (BF52x || BF54x)
+        default BF_REV_0_1 if (BF51x || BF52x || BF54x)
         default BF_REV_0_2 if (BF534 || BF536 || BF537)
         default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
 
 config BF_REV_0_0
         bool "0.0"
-        depends on (BF52x || BF54x)
+        depends on (BF51x || BF52x || BF54x)
 
 config BF_REV_0_1
         bool "0.1"
@@ -206,11 +260,11 @@ config BF_REV_0_3
 
 config BF_REV_0_4
         bool "0.4"
-        depends on (BF561 || BF533 || BF532 || BF531)
+        depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
 
 config BF_REV_0_5
         bool "0.5"
-        depends on (BF561 || BF533 || BF532 || BF531)
+        depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
 
 config BF_REV_0_6
         bool "0.6"
@@ -224,6 +278,11 @@ config BF_REV_NONE
 
 endchoice
 
+config BF51x
+        bool
+        depends on (BF512 || BF514 || BF516 || BF518)
+        default y
+
 config BF52x
         bool
         depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
@@ -258,7 +317,7 @@ config MEM_MT48LC16M16A2TG_75
 
 config MEM_MT48LC32M8A2_75
         bool
-        depends on (BFIN537_STAMP || PNAV10)
+        depends on (BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
         default y
 
 config MEM_MT48LC8M32B2B5_7
@@ -271,10 +330,17 @@ config MEM_MT48LC32M16A2TG_75
         depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
         default y
 
+config MEM_MT48LC32M8A2_75
+        bool
+        depends on (BFIN518F_EZBRD)
+        default y
+
+source "arch/blackfin/mach-bf518/Kconfig"
 source "arch/blackfin/mach-bf527/Kconfig"
 source "arch/blackfin/mach-bf533/Kconfig"
 source "arch/blackfin/mach-bf561/Kconfig"
 source "arch/blackfin/mach-bf537/Kconfig"
+source "arch/blackfin/mach-bf538/Kconfig"
 source "arch/blackfin/mach-bf548/Kconfig"
 
 menu "Board customizations"
@@ -307,6 +373,7 @@ config BOOT_LOAD
 
 config ROM_BASE
         hex "Kernel ROM Base"
+        depends on ROMKERNEL
         default "0x20040000"
         range 0x20000000 0x20400000 if !(BF54x || BF561)
         range 0x20000000 0x30000000 if (BF54x || BF561)
@@ -318,7 +385,7 @@ config CLKIN_HZ
         int "Frequency of the crystal on the board in Hz"
         default "11059200" if BFIN533_STAMP
         default "27000000" if BFIN533_EZKIT
-        default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
+        default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD)
         default "30000000" if BFIN561_EZKIT
         default "24576000" if PNAV10
         default "10000000" if BFIN532_IP0X
@@ -354,11 +421,11 @@ config VCO_MULT
         range 1 64
         default "22" if BFIN533_EZKIT
         default "45" if BFIN533_STAMP
-        default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
+        default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
         default "22" if BFIN533_BLUETECHNIX_CM
         default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
         default "20" if BFIN561_EZKIT
-        default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
+        default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
         help
           This controls the frequency of the on-chip PLL. This can be between 1 and 64.
           PLL Frequency = (Crystal Frequency) * (this setting)
@@ -407,19 +474,70 @@ config MEM_MT46V32M16_5B
         bool "MT46V32M16_5B"
 endchoice
 
-config MAX_MEM_SIZE
-        int "Max SDRAM Memory Size in MBytes"
-        depends on !MPU
-        default 512
+choice
+        prompt "DDR/SDRAM Timing"
+        depends on BFIN_KERNEL_CLOCK
+        default BFIN_KERNEL_CLOCK_MEMINIT_CALC
         help
-          This is the max memory size that the kernel will create CPLB
-          tables for.  Your system will not be able to handle any more.
+          This option allows you to specify Blackfin SDRAM/DDR Timing parameters
+          The calculated SDRAM timing parameters may not be 100%
+          accurate - This option is therefore marked experimental.
+
+config BFIN_KERNEL_CLOCK_MEMINIT_CALC
+        bool "Calculate Timings (EXPERIMENTAL)"
+        depends on EXPERIMENTAL
+
+config BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+        bool "Provide accurate Timings based on target SCLK"
+        help
+          Please consult the Blackfin Hardware Reference Manuals as well
+          as the memory device datasheet.
+          http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram
+endchoice
+
+menu "Memory Init Control"
+        depends on BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+
+config MEM_DDRCTL0
+        depends on BF54x
+        hex "DDRCTL0"
+        default 0x0
+
+config MEM_DDRCTL1
+        depends on BF54x
+        hex "DDRCTL1"
+        default 0x0
+
+config MEM_DDRCTL2
+        depends on BF54x
+        hex "DDRCTL2"
+        default 0x0
+
+config MEM_EBIU_DDRQUE
+        depends on BF54x
+        hex "DDRQUE"
+        default 0x0
+
+config MEM_SDRRC
+        depends on !BF54x
+        hex "SDRRC"
+        default 0x0
+
+config MEM_SDGCTL
+        depends on !BF54x
+        hex "SDGCTL"
+        default 0x0
+endmenu
 
 #
 # Max & Min Speeds for various Chips
 #
 config MAX_VCO_HZ
         int
+        default 400000000 if BF512
+        default 400000000 if BF514
+        default 400000000 if BF516
+        default 400000000 if BF518
         default 600000000 if BF522
         default 400000000 if BF523
         default 400000000 if BF524
@@ -459,6 +577,7 @@ source kernel/Kconfig.hz
 
 config GENERIC_TIME
         bool "Generic time"
+        depends on !SMP
         default y
 
 config GENERIC_CLOCKEVENTS
@@ -533,6 +652,7 @@ endmenu
 
 
 menu "Blackfin Kernel Optimizations"
+        depends on !SMP
 
 comment "Memory Optimizations"
 
@@ -655,6 +775,17 @@ config APP_STACK_L1
 
           Currently only works with FLAT binaries.
 
+config EXCEPTION_L1_SCRATCH
+        bool "Locate exception stack in L1 Scratch Memory"
+        default n
+        depends on !APP_STACK_L1 && !SYSCALL_TAB_L1
+        help
+          Whenever an exception occurs, use the L1 Scratch memory for
+          stack storage.  You cannot place the stacks of FLAT binaries
+          in L1 when using this option.
+
+          If you don't use L1 Scratch, then you should say Y here.
+
 comment "Speed Optimizations"
 config BFIN_INS_LOWOVERHEAD
         bool "ins[bwl] low overhead, higher interrupt latency"
@@ -684,7 +815,6 @@ config BFIN_INS_LOWOVERHEAD
 
 endmenu
 
-
 choice
         prompt "Kernel executes from"
         help
@@ -714,17 +844,9 @@ config BFIN_GPTIMERS
           To compile this driver as a module, choose M here: the module
           will be called gptimers.ko.
 
-config BFIN_DMA_5XX
-        bool "Enable DMA Support"
-        depends on (BF52x || BF53x || BF561 || BF54x)
-        default y
-        help
-          DMA driver for BF5xx.
-
 choice
-        prompt "Uncached SDRAM region"
+        prompt "Uncached DMA region"
         default DMA_UNCACHED_1M
-        depends on BFIN_DMA_5XX
 config DMA_UNCACHED_4M
         bool "Enable 4M DMA region"
 config DMA_UNCACHED_2M
@@ -751,9 +873,11 @@ config BFIN_ICACHE_LOCK
 choice
         prompt "Policy"
         depends on BFIN_DCACHE
-        default BFIN_WB
+        default BFIN_WB if !SMP
+        default BFIN_WT if SMP
 config BFIN_WB
         bool "Write back"
+        depends on !SMP
         help
           Write Back Policy:
             Cached data will be written back to SDRAM only when needed.
@@ -790,7 +914,7 @@ endchoice
 
 config BFIN_L2_CACHEABLE
         bool "Cache L2 SRAM"
-        depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || BF561)
+        depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || (BF561 && !SMP))
         default n
         help
           Select to make L2 SRAM cacheable in L1 data and instruction cache.
@@ -980,7 +1104,7 @@ config PM_WAKEUP_GPIO_NUMBER
         int "GPIO number"
         range 0 47
         depends on PM_WAKEUP_BY_GPIO
-        default 2 if BFIN537_STAMP
+        default 2
 
 choice
         prompt "GPIO Polarity"
@@ -1003,7 +1127,7 @@ comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
 
 config PM_BFIN_WAKE_PH6
         bool "Allow Wake-Up from on-chip PHY or PH6 GP"
-        depends on PM && (BF52x || BF534 || BF536 || BF537)
+        depends on PM && (BF51x || BF52x || BF534 || BF536 || BF537)
         default n
         help
           Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
@@ -1020,15 +1144,21 @@ menu "CPU Frequency scaling"
 
 source "drivers/cpufreq/Kconfig"
 
+config BFIN_CPU_FREQ
+        bool
+        depends on CPU_FREQ
+        select CPU_FREQ_TABLE
+        default y
+
 config CPU_VOLTAGE
         bool "CPU Voltage scaling"
-        depends on EXPERIMENTAL 
+        depends on EXPERIMENTAL
         depends on CPU_FREQ
         default n
         help
           Say Y here if you want CPU voltage scaling according to the CPU frequency.
           This option violates the PLL BYPASS recommendation in the Blackfin Processor
-          manuals. There is a theoretical risk that during VDDINT transitions 
+          manuals. There is a theoretical risk that during VDDINT transitions
           the PLL may unlock.
 
 endmenu