3 files changed, 0 insertions, 184 deletions
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 5e6011ce36e..6792dd14b6e 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -49,9 +49,6 @@
 #include "generic.h"
-void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-EXPORT_SYMBOL(assign_h3600_egpio);
 struct gpio_default_state {
        int gpio;
        int mode;
@@ -306,72 +303,6 @@ static void __init h3xxx_map_io(void)
 #ifdef CONFIG_SA1100_H3100
-#define H3100_EGPIO     (*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3100_egpio = 0;
-static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
-{
-        unsigned int egpio = 0;
-        long         gpio = 0;
-        unsigned long flags;
-        switch (x) {
-        case IPAQ_EGPIO_LCD_POWER:
-                egpio |= EGPIO_H3600_LCD_ON;
-                gpio  |= GPIO_H3100_LCD_3V_ON;
-                break;
-        case IPAQ_EGPIO_LCD_ENABLE:
-                break;
-        case IPAQ_EGPIO_CODEC_NRESET:
-                egpio |= EGPIO_H3600_CODEC_NRESET;
-                break;
-        case IPAQ_EGPIO_AUDIO_ON:
-                gpio |= GPIO_H3100_AUD_PWR_ON
-                        | GPIO_H3100_AUD_ON;
-                break;
-        case IPAQ_EGPIO_QMUTE:
-                gpio |= GPIO_H3100_QMUTE;
-                break;
-        case IPAQ_EGPIO_OPT_NVRAM_ON:
-                egpio |= EGPIO_H3600_OPT_NVRAM_ON;
-                break;
-        case IPAQ_EGPIO_OPT_ON:
-                egpio |= EGPIO_H3600_OPT_ON;
-                break;
-        case IPAQ_EGPIO_CARD_RESET:
-                egpio |= EGPIO_H3600_CARD_RESET;
-                break;
-        case IPAQ_EGPIO_OPT_RESET:
-                egpio |= EGPIO_H3600_OPT_RESET;
-                break;
-        case IPAQ_EGPIO_IR_ON:
-                gpio |= GPIO_H3100_IR_ON;
-                break;
-        case IPAQ_EGPIO_IR_FSEL:
-                gpio |= GPIO_H3100_IR_FSEL;
-                break;
-        case IPAQ_EGPIO_RS232_ON:
-                egpio |= EGPIO_H3600_RS232_ON;
-                break;
-        case IPAQ_EGPIO_VPP_ON:
-                egpio |= EGPIO_H3600_VPP_ON;
-                break;
-        }
-        if (egpio || gpio) {
-                local_irq_save(flags);
-                if (setp) {
-                        h3100_egpio |= egpio;
-                        GPSR = gpio;
-                } else {
-                        h3100_egpio &= ~egpio;
-                        GPCR = gpio;
-                }
-                H3100_EGPIO = h3100_egpio;
-                local_irq_restore(flags);
-        }
-}
 #define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON      \
                          | GPIO_H3100_GPIO3      \
                          | GPIO_H3100_QMUTE      \
@@ -409,9 +340,6 @@ static void __init h3100_map_io(void)
        /* Older bootldrs put GPIO2-9 in alternate mode on the
           assumption that they are used for video */
        GAFR &= ~H3100_DIRECT_EGPIO;
-        H3100_EGPIO = h3100_egpio;
-        assign_h3600_egpio = h3100_control_egpio;
 }
 /*
@@ -465,70 +393,6 @@ MACHINE_END
 #ifdef CONFIG_SA1100_H3600
-#define H3600_EGPIO     (*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON;
-static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
-{
-        unsigned int egpio = 0;
-        unsigned long flags;
-        switch (x) {
-        case IPAQ_EGPIO_LCD_POWER:
-                egpio |= EGPIO_H3600_LCD_ON |
-                         EGPIO_H3600_LCD_PCI |
-                         EGPIO_H3600_LCD_5V_ON |
-                         EGPIO_H3600_LVDD_ON;
-                break;
-        case IPAQ_EGPIO_LCD_ENABLE:
-                break;
-        case IPAQ_EGPIO_CODEC_NRESET:
-                egpio |= EGPIO_H3600_CODEC_NRESET;
-                break;
-        case IPAQ_EGPIO_AUDIO_ON:
-                egpio |= EGPIO_H3600_AUD_AMP_ON |
-                         EGPIO_H3600_AUD_PWR_ON;
-                break;
-        case IPAQ_EGPIO_QMUTE:
-                egpio |= EGPIO_H3600_QMUTE;
-                break;
-        case IPAQ_EGPIO_OPT_NVRAM_ON:
-                egpio |= EGPIO_H3600_OPT_NVRAM_ON;
-                break;
-        case IPAQ_EGPIO_OPT_ON:
-                egpio |= EGPIO_H3600_OPT_ON;
-                break;
-        case IPAQ_EGPIO_CARD_RESET:
-                egpio |= EGPIO_H3600_CARD_RESET;
-                break;
-        case IPAQ_EGPIO_OPT_RESET:
-                egpio |= EGPIO_H3600_OPT_RESET;
-                break;
-        case IPAQ_EGPIO_IR_ON:
-                egpio |= EGPIO_H3600_IR_ON;
-                break;
-        case IPAQ_EGPIO_IR_FSEL:
-                egpio |= EGPIO_H3600_IR_FSEL;
-                break;
-        case IPAQ_EGPIO_RS232_ON:
-                egpio |= EGPIO_H3600_RS232_ON;
-                break;
-        case IPAQ_EGPIO_VPP_ON:
-                egpio |= EGPIO_H3600_VPP_ON;
-                break;
-        }
-        if (egpio) {
-                local_irq_save(flags);
-                if (setp)
-                        h3600_egpio |= egpio;
-                else
-                        h3600_egpio &= ~egpio;
-                H3600_EGPIO = h3600_egpio;
-                local_irq_restore(flags);
-        }
-}
 /*
 * helper for sa1100fb
 */
@@ -567,9 +431,6 @@ static void __init h3600_map_io(void)
        GPDR = GPIO_H3600_L3_CLOCK |
               GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
               GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0;
-        H3600_EGPIO = h3600_egpio;         /* Maintains across sleep? */
-        assign_h3600_egpio = h3600_control_egpio;
 }
 /*
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
index 69f138c5540..19d7fe1b587 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -66,27 +66,4 @@
 #define IRQ_GPIO_H3600_OPT_IRQ          IRQ_GPIO24
 #define IRQ_GPIO_H3600_COM_CTS          IRQ_GPIO25
-#ifndef __ASSEMBLY__
-enum ipaq_egpio_type {
-        IPAQ_EGPIO_LCD_POWER,     /* Power to the LCD panel */
-        IPAQ_EGPIO_CODEC_NRESET,  /* Clear to reset the audio codec (remember to return high) */
-        IPAQ_EGPIO_AUDIO_ON,      /* Audio power */
-        IPAQ_EGPIO_QMUTE,         /* Audio muting */
-        IPAQ_EGPIO_OPT_NVRAM_ON,  /* Non-volatile RAM on extension sleeves (SPI interface) */
-        IPAQ_EGPIO_OPT_ON,        /* Power to extension sleeves */
-        IPAQ_EGPIO_CARD_RESET,    /* Reset PCMCIA cards on extension sleeve (???) */
-        IPAQ_EGPIO_OPT_RESET,     /* Reset option pack (???) */
-        IPAQ_EGPIO_IR_ON,         /* IR sensor/emitter power */
-        IPAQ_EGPIO_IR_FSEL,       /* IR speed selection 1->fast, 0->slow */
-        IPAQ_EGPIO_RS232_ON,      /* Maxim RS232 chip power */
-        IPAQ_EGPIO_VPP_ON,        /* Turn on power to flash programming */
-        IPAQ_EGPIO_LCD_ENABLE,    /* Enable/disable LCD controller */
-};
-extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-#endif /* ASSEMBLY */
 #endif /* _INCLUDE_H3600_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
index ce80f1ae0c1..6cfbc649f18 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
@@ -76,28 +76,6 @@
 #define IRQ_GPIO_H3600_ACTION_BUTTON    IRQ_GPIO18
 #define IRQ_GPIO_H3600_OPT_DET          IRQ_GPIO27
-/* H3100 / 3600 EGPIO pins */
-#define EGPIO_H3600_VPP_ON              (1 << 0)
-#define EGPIO_H3600_CARD_RESET          (1 << 1)   /* reset the attached pcmcia/compactflash card.  active high. */
-#define EGPIO_H3600_OPT_RESET           (1 << 2)   /* reset the attached option pack.  active high. */
-#define EGPIO_H3600_CODEC_NRESET        (1 << 3)   /* reset the onboard UDA1341.  active low. */
-#define EGPIO_H3600_OPT_NVRAM_ON        (1 << 4)   /* apply power to optionpack nvram, active high. */
-#define EGPIO_H3600_OPT_ON              (1 << 5)   /* full power to option pack.  active high. */
-#define EGPIO_H3600_LCD_ON              (1 << 6)   /* enable 3.3V to LCD.  active high. */
-#define EGPIO_H3600_RS232_ON            (1 << 7)   /* UART3 transceiver force on.  Active high. */
-/* H3600 only EGPIO pins */
-#define EGPIO_H3600_LCD_PCI             (1 << 8)   /* LCD control IC enable.  active high. */
-#define EGPIO_H3600_IR_ON               (1 << 9)   /* apply power to IR module.  active high. */
-#define EGPIO_H3600_AUD_AMP_ON          (1 << 10)  /* apply power to audio power amp.  active high. */
-#define EGPIO_H3600_AUD_PWR_ON          (1 << 11)  /* apply power to reset of audio circuit.  active high. */
-#define EGPIO_H3600_QMUTE               (1 << 12)  /* mute control for onboard UDA1341.  active high. */
-#define EGPIO_H3600_IR_FSEL             (1 << 13)  /* IR speed select: 1->fast, 0->slow */
-#define EGPIO_H3600_LCD_5V_ON           (1 << 14)  /* enable 5V to LCD. active high. */
-#define EGPIO_H3600_LVDD_ON             (1 << 15)  /* enable 9V and -6.5V to LCD. */
-/* gpiolib versions of EGPIOs */
 /* H3100 / 3600 EGPIO pins */
 #define H3XXX_EGPIO_BASE                (GPIO_MAX + 1)

diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 5e6011ce36e..6792dd14b6e 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c
@@ -49,9 +49,6 @@
49		49
50	#include "generic.h"	50	#include "generic.h"
51		51
52	void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
53	EXPORT_SYMBOL(assign_h3600_egpio);
54
55	struct gpio_default_state {	52	struct gpio_default_state {
56	int gpio;	53	int gpio;
57	int mode;	54	int mode;
@@ -306,72 +303,6 @@ static void __init h3xxx_map_io(void)
306		303
307	#ifdef CONFIG_SA1100_H3100	304	#ifdef CONFIG_SA1100_H3100
308		305
309	#define H3100_EGPIO ((volatile unsigned int )H3600_EGPIO_VIRT)
310	static unsigned int h3100_egpio = 0;
311
312	static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
313	{
314	unsigned int egpio = 0;
315	long gpio = 0;
316	unsigned long flags;
317
318	switch (x) {
319	case IPAQ_EGPIO_LCD_POWER:
320	egpio \|= EGPIO_H3600_LCD_ON;
321	gpio \|= GPIO_H3100_LCD_3V_ON;
322	break;
323	case IPAQ_EGPIO_LCD_ENABLE:
324	break;
325	case IPAQ_EGPIO_CODEC_NRESET:
326	egpio \|= EGPIO_H3600_CODEC_NRESET;
327	break;
328	case IPAQ_EGPIO_AUDIO_ON:
329	gpio \|= GPIO_H3100_AUD_PWR_ON
330	\| GPIO_H3100_AUD_ON;
331	break;
332	case IPAQ_EGPIO_QMUTE:
333	gpio \|= GPIO_H3100_QMUTE;
334	break;
335	case IPAQ_EGPIO_OPT_NVRAM_ON:
336	egpio \|= EGPIO_H3600_OPT_NVRAM_ON;
337	break;
338	case IPAQ_EGPIO_OPT_ON:
339	egpio \|= EGPIO_H3600_OPT_ON;
340	break;
341	case IPAQ_EGPIO_CARD_RESET:
342	egpio \|= EGPIO_H3600_CARD_RESET;
343	break;
344	case IPAQ_EGPIO_OPT_RESET:
345	egpio \|= EGPIO_H3600_OPT_RESET;
346	break;
347	case IPAQ_EGPIO_IR_ON:
348	gpio \|= GPIO_H3100_IR_ON;
349	break;
350	case IPAQ_EGPIO_IR_FSEL:
351	gpio \|= GPIO_H3100_IR_FSEL;
352	break;
353	case IPAQ_EGPIO_RS232_ON:
354	egpio \|= EGPIO_H3600_RS232_ON;
355	break;
356	case IPAQ_EGPIO_VPP_ON:
357	egpio \|= EGPIO_H3600_VPP_ON;
358	break;
359	}
360
361	if (egpio \|\| gpio) {
362	local_irq_save(flags);
363	if (setp) {
364	h3100_egpio \|= egpio;
365	GPSR = gpio;
366	} else {
367	h3100_egpio &= ~egpio;
368	GPCR = gpio;
369	}
370	H3100_EGPIO = h3100_egpio;
371	local_irq_restore(flags);
372	}
373	}
374
375	#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \	306	#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \
376	\| GPIO_H3100_GPIO3 \	307	\| GPIO_H3100_GPIO3 \
377	\| GPIO_H3100_QMUTE \	308	\| GPIO_H3100_QMUTE \
@@ -409,9 +340,6 @@ static void __init h3100_map_io(void)
409	/* Older bootldrs put GPIO2-9 in alternate mode on the	340	/* Older bootldrs put GPIO2-9 in alternate mode on the
410	assumption that they are used for video */	341	assumption that they are used for video */
411	GAFR &= ~H3100_DIRECT_EGPIO;	342	GAFR &= ~H3100_DIRECT_EGPIO;
412
413	H3100_EGPIO = h3100_egpio;
414	assign_h3600_egpio = h3100_control_egpio;
415	}	343	}
416		344
417	/*	345	/*
@@ -465,70 +393,6 @@ MACHINE_END
465		393
466	#ifdef CONFIG_SA1100_H3600	394	#ifdef CONFIG_SA1100_H3600
467		395
468	#define H3600_EGPIO ((volatile unsigned int )H3600_EGPIO_VIRT)
469	static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON;
470
471	static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
472	{
473	unsigned int egpio = 0;
474	unsigned long flags;
475
476	switch (x) {
477	case IPAQ_EGPIO_LCD_POWER:
478	egpio \|= EGPIO_H3600_LCD_ON \|
479	EGPIO_H3600_LCD_PCI \|
480	EGPIO_H3600_LCD_5V_ON \|
481	EGPIO_H3600_LVDD_ON;
482	break;
483	case IPAQ_EGPIO_LCD_ENABLE:
484	break;
485	case IPAQ_EGPIO_CODEC_NRESET:
486	egpio \|= EGPIO_H3600_CODEC_NRESET;
487	break;
488	case IPAQ_EGPIO_AUDIO_ON:
489	egpio \|= EGPIO_H3600_AUD_AMP_ON \|
490	EGPIO_H3600_AUD_PWR_ON;
491	break;
492	case IPAQ_EGPIO_QMUTE:
493	egpio \|= EGPIO_H3600_QMUTE;
494	break;
495	case IPAQ_EGPIO_OPT_NVRAM_ON:
496	egpio \|= EGPIO_H3600_OPT_NVRAM_ON;
497	break;
498	case IPAQ_EGPIO_OPT_ON:
499	egpio \|= EGPIO_H3600_OPT_ON;
500	break;
501	case IPAQ_EGPIO_CARD_RESET:
502	egpio \|= EGPIO_H3600_CARD_RESET;
503	break;
504	case IPAQ_EGPIO_OPT_RESET:
505	egpio \|= EGPIO_H3600_OPT_RESET;
506	break;
507	case IPAQ_EGPIO_IR_ON:
508	egpio \|= EGPIO_H3600_IR_ON;
509	break;
510	case IPAQ_EGPIO_IR_FSEL:
511	egpio \|= EGPIO_H3600_IR_FSEL;
512	break;
513	case IPAQ_EGPIO_RS232_ON:
514	egpio \|= EGPIO_H3600_RS232_ON;
515	break;
516	case IPAQ_EGPIO_VPP_ON:
517	egpio \|= EGPIO_H3600_VPP_ON;
518	break;
519	}
520
521	if (egpio) {
522	local_irq_save(flags);
523	if (setp)
524	h3600_egpio \|= egpio;
525	else
526	h3600_egpio &= ~egpio;
527	H3600_EGPIO = h3600_egpio;
528	local_irq_restore(flags);
529	}
530	}
531
532	/*	396	/*
533	* helper for sa1100fb	397	* helper for sa1100fb
534	*/	398	*/
@@ -567,9 +431,6 @@ static void __init h3600_map_io(void)
567	GPDR = GPIO_H3600_L3_CLOCK \|	431	GPDR = GPIO_H3600_L3_CLOCK \|
568	GPIO_H3600_L3_MODE \| GPIO_H3600_L3_DATA \|	432	GPIO_H3600_L3_MODE \| GPIO_H3600_L3_DATA \|
569	GPIO_H3600_CLK_SET1 \| GPIO_H3600_CLK_SET0;	433	GPIO_H3600_CLK_SET1 \| GPIO_H3600_CLK_SET0;
570
571	H3600_EGPIO = h3600_egpio; /* Maintains across sleep? */
572	assign_h3600_egpio = h3600_control_egpio;
573	}	434	}
574		435
575	/*	436	/*


diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h index 69f138c5540..19d7fe1b587 100644 --- a/arch/arm/mach-sa1100/include/mach/h3600.h +++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -66,27 +66,4 @@
66	#define IRQ_GPIO_H3600_OPT_IRQ IRQ_GPIO24	66	#define IRQ_GPIO_H3600_OPT_IRQ IRQ_GPIO24
67	#define IRQ_GPIO_H3600_COM_CTS IRQ_GPIO25	67	#define IRQ_GPIO_H3600_COM_CTS IRQ_GPIO25
68		68
69
70	#ifndef __ASSEMBLY__
71
72	enum ipaq_egpio_type {
73	IPAQ_EGPIO_LCD_POWER, /* Power to the LCD panel */
74	IPAQ_EGPIO_CODEC_NRESET, /* Clear to reset the audio codec (remember to return high) */
75	IPAQ_EGPIO_AUDIO_ON, /* Audio power */
76	IPAQ_EGPIO_QMUTE, /* Audio muting */
77	IPAQ_EGPIO_OPT_NVRAM_ON, /* Non-volatile RAM on extension sleeves (SPI interface) */
78	IPAQ_EGPIO_OPT_ON, /* Power to extension sleeves */
79	IPAQ_EGPIO_CARD_RESET, /* Reset PCMCIA cards on extension sleeve (???) */
80	IPAQ_EGPIO_OPT_RESET, /* Reset option pack (???) */
81	IPAQ_EGPIO_IR_ON, /* IR sensor/emitter power */
82	IPAQ_EGPIO_IR_FSEL, /* IR speed selection 1->fast, 0->slow */
83	IPAQ_EGPIO_RS232_ON, /* Maxim RS232 chip power */
84	IPAQ_EGPIO_VPP_ON, /* Turn on power to flash programming */
85	IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */
86	};
87
88	extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
89
90	#endif /* ASSEMBLY */
91
92	#endif /* _INCLUDE_H3600_H_ */	69	#endif /* _INCLUDE_H3600_H_ */


diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h index ce80f1ae0c1..6cfbc649f18 100644 --- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h +++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
@@ -76,28 +76,6 @@
76	#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18	76	#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18
77	#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27	77	#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27
78		78
79	/* H3100 / 3600 EGPIO pins */
80	#define EGPIO_H3600_VPP_ON (1 << 0)
81	#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */
82	#define EGPIO_H3600_OPT_RESET (1 << 2) /* reset the attached option pack. active high. */
83	#define EGPIO_H3600_CODEC_NRESET (1 << 3) /* reset the onboard UDA1341. active low. */
84	#define EGPIO_H3600_OPT_NVRAM_ON (1 << 4) /* apply power to optionpack nvram, active high. */
85	#define EGPIO_H3600_OPT_ON (1 << 5) /* full power to option pack. active high. */
86	#define EGPIO_H3600_LCD_ON (1 << 6) /* enable 3.3V to LCD. active high. */
87	#define EGPIO_H3600_RS232_ON (1 << 7) /* UART3 transceiver force on. Active high. */
88
89	/* H3600 only EGPIO pins */
90	#define EGPIO_H3600_LCD_PCI (1 << 8) /* LCD control IC enable. active high. */
91	#define EGPIO_H3600_IR_ON (1 << 9) /* apply power to IR module. active high. */
92	#define EGPIO_H3600_AUD_AMP_ON (1 << 10) /* apply power to audio power amp. active high. */
93	#define EGPIO_H3600_AUD_PWR_ON (1 << 11) /* apply power to reset of audio circuit. active high. */
94	#define EGPIO_H3600_QMUTE (1 << 12) /* mute control for onboard UDA1341. active high. */
95	#define EGPIO_H3600_IR_FSEL (1 << 13) /* IR speed select: 1->fast, 0->slow */
96	#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */
97	#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */
98
99
100	/* gpiolib versions of EGPIOs */
101		79
102	/* H3100 / 3600 EGPIO pins */	80	/* H3100 / 3600 EGPIO pins */
103	#define H3XXX_EGPIO_BASE (GPIO_MAX + 1)	81	#define H3XXX_EGPIO_BASE (GPIO_MAX + 1)