1 files changed, 12 insertions, 11 deletions

diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 571b17683d9..a76bcda210a 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -53,6 +53,7 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -102,10 +103,10 @@ static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
         switch (cmd) {
                 case S3C2410_UDC_P_ENABLE :
-                        s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+                        gpio_set_value(S3C2410_GPC(5), 1);
                         break;
                 case S3C2410_UDC_P_DISABLE :
-                        s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+                        gpio_set_value(S3C2410_GPC(5), 0);
                         break;
                 case S3C2410_UDC_P_RESET :
                         break;
@@ -632,25 +633,25 @@ static void __init mini2440_init(void)
         mini2440_parse_features(&features, mini2440_features_str);
 
         /* turn LCD on */
-        s3c2410_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
+        s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
 
         /* Turn the backlight early on */
-        s3c2410_gpio_setpin(S3C2410_GPG(4), 1);
-        s3c2410_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT);
+        WARN_ON(gpio_request(S3C2410_GPG(4), "backlight"));
+        gpio_direction_output(S3C2410_GPG(4), 1);
 
         /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
-        s3c2410_gpio_pullup(S3C2410_GPB(1), 0);
+        s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
         s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
-        s3c2410_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
+        s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
 
         /* Make sure the D+ pullup pin is output */
-        s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
+        WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup"));
+        gpio_direction_output(S3C2410_GPC(5), 0);
 
         /* mark the key as input, without pullups (there is one on the board) */
         for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
-                s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0);
-                s3c2410_gpio_cfgpin(mini2440_buttons[i].gpio,
-                                        S3C2410_GPIO_INPUT);
+                s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
+                s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
         }
         if (features.lcd_index != -1) {
                 int li;