aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/balloon3.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/balloon3.c')
-rw-r--r--arch/arm/mach-pxa/balloon3.c732
1 files changed, 581 insertions, 151 deletions
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index f3b5ace815e..9041340fee1 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -22,9 +22,14 @@
22#include <linux/fb.h> 22#include <linux/fb.h>
23#include <linux/gpio.h> 23#include <linux/gpio.h>
24#include <linux/ioport.h> 24#include <linux/ioport.h>
25#include <linux/ucb1400.h>
25#include <linux/mtd/mtd.h> 26#include <linux/mtd/mtd.h>
26#include <linux/mtd/partitions.h> 27#include <linux/mtd/partitions.h>
27#include <linux/types.h> 28#include <linux/types.h>
29#include <linux/i2c/pcf857x.h>
30#include <linux/mtd/nand.h>
31#include <linux/mtd/physmap.h>
32#include <linux/regulator/max1586.h>
28 33
29#include <asm/setup.h> 34#include <asm/setup.h>
30#include <asm/mach-types.h> 35#include <asm/mach-types.h>
@@ -51,6 +56,59 @@
51#include "generic.h" 56#include "generic.h"
52#include "devices.h" 57#include "devices.h"
53 58
59/******************************************************************************
60 * Pin configuration
61 ******************************************************************************/
62static unsigned long balloon3_pin_config[] __initdata = {
63 /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
64 GPIO42_BTUART_RXD,
65 GPIO43_BTUART_TXD,
66 GPIO44_BTUART_CTS,
67 GPIO45_BTUART_RTS,
68
69 /* Reset, configured as GPIO wakeup source */
70 GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
71
72 /* LEDs */
73 GPIO9_GPIO, /* NAND activity LED */
74 GPIO10_GPIO, /* Heartbeat LED */
75
76 /* AC97 */
77 GPIO28_AC97_BITCLK,
78 GPIO29_AC97_SDATA_IN_0,
79 GPIO30_AC97_SDATA_OUT,
80 GPIO31_AC97_SYNC,
81 GPIO113_AC97_nRESET,
82 GPIO95_GPIO,
83
84 /* MMC */
85 GPIO32_MMC_CLK,
86 GPIO92_MMC_DAT_0,
87 GPIO109_MMC_DAT_1,
88 GPIO110_MMC_DAT_2,
89 GPIO111_MMC_DAT_3,
90 GPIO112_MMC_CMD,
91
92 /* USB Host */
93 GPIO88_USBH1_PWR,
94 GPIO89_USBH1_PEN,
95
96 /* PC Card */
97 GPIO48_nPOE,
98 GPIO49_nPWE,
99 GPIO50_nPIOR,
100 GPIO51_nPIOW,
101 GPIO85_nPCE_1,
102 GPIO54_nPCE_2,
103 GPIO79_PSKTSEL,
104 GPIO55_nPREG,
105 GPIO56_nPWAIT,
106 GPIO57_nIOIS16,
107};
108
109/******************************************************************************
110 * Compatibility: Parameter parsing
111 ******************************************************************************/
54static unsigned long balloon3_irq_enabled; 112static unsigned long balloon3_irq_enabled;
55 113
56static unsigned long balloon3_features_present = 114static unsigned long balloon3_features_present =
@@ -73,6 +131,321 @@ int __init parse_balloon3_features(char *arg)
73} 131}
74early_param("balloon3_features", parse_balloon3_features); 132early_param("balloon3_features", parse_balloon3_features);
75 133
134/******************************************************************************
135 * NOR Flash
136 ******************************************************************************/
137#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
138static struct mtd_partition balloon3_nor_partitions[] = {
139 {
140 .name = "Flash",
141 .offset = 0x00000000,
142 .size = MTDPART_SIZ_FULL,
143 }
144};
145
146static struct physmap_flash_data balloon3_flash_data[] = {
147 {
148 .width = 2, /* bankwidth in bytes */
149 .parts = balloon3_nor_partitions,
150 .nr_parts = ARRAY_SIZE(balloon3_nor_partitions)
151 }
152};
153
154static struct resource balloon3_flash_resource = {
155 .start = PXA_CS0_PHYS,
156 .end = PXA_CS0_PHYS + SZ_64M - 1,
157 .flags = IORESOURCE_MEM,
158};
159
160static struct platform_device balloon3_flash = {
161 .name = "physmap-flash",
162 .id = 0,
163 .resource = &balloon3_flash_resource,
164 .num_resources = 1,
165 .dev = {
166 .platform_data = balloon3_flash_data,
167 },
168};
169static void __init balloon3_nor_init(void)
170{
171 platform_device_register(&balloon3_flash);
172}
173#else
174static inline void balloon3_nor_init(void) {}
175#endif
176
177/******************************************************************************
178 * Audio and Touchscreen
179 ******************************************************************************/
180#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
181 defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
182static struct ucb1400_pdata vpac270_ucb1400_pdata = {
183 .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
184};
185
186
187static struct platform_device balloon3_ucb1400_device = {
188 .name = "ucb1400_core",
189 .id = -1,
190 .dev = {
191 .platform_data = &vpac270_ucb1400_pdata,
192 },
193};
194
195static void __init balloon3_ts_init(void)
196{
197 if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
198 return;
199
200 pxa_set_ac97_info(NULL);
201 platform_device_register(&balloon3_ucb1400_device);
202}
203#else
204static inline void balloon3_ts_init(void) {}
205#endif
206
207/******************************************************************************
208 * Framebuffer
209 ******************************************************************************/
210#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
211static struct pxafb_mode_info balloon3_lcd_modes[] = {
212 {
213 .pixclock = 38000,
214 .xres = 480,
215 .yres = 640,
216 .bpp = 16,
217 .hsync_len = 8,
218 .left_margin = 8,
219 .right_margin = 8,
220 .vsync_len = 2,
221 .upper_margin = 4,
222 .lower_margin = 5,
223 .sync = 0,
224 },
225};
226
227static struct pxafb_mach_info balloon3_lcd_screen = {
228 .modes = balloon3_lcd_modes,
229 .num_modes = ARRAY_SIZE(balloon3_lcd_modes),
230 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
231};
232
233static void balloon3_backlight_power(int on)
234{
235 gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
236}
237
238static void __init balloon3_lcd_init(void)
239{
240 int ret;
241
242 if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
243 return;
244
245 ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
246 if (ret) {
247 pr_err("Requesting BKL-ON GPIO failed!\n");
248 goto err;
249 }
250
251 ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
252 if (ret) {
253 pr_err("Setting BKL-ON GPIO direction failed!\n");
254 goto err2;
255 }
256
257 balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
258 set_pxa_fb_info(&balloon3_lcd_screen);
259 return;
260
261err2:
262 gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
263err:
264 return;
265}
266#else
267static inline void balloon3_lcd_init(void) {}
268#endif
269
270/******************************************************************************
271 * SD/MMC card controller
272 ******************************************************************************/
273#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
274static struct pxamci_platform_data balloon3_mci_platform_data = {
275 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
276 .gpio_card_detect = -1,
277 .gpio_card_ro = -1,
278 .gpio_power = -1,
279 .detect_delay_ms = 200,
280};
281
282static void __init balloon3_mmc_init(void)
283{
284 pxa_set_mci_info(&balloon3_mci_platform_data);
285}
286#else
287static inline void balloon3_mmc_init(void) {}
288#endif
289
290/******************************************************************************
291 * USB Gadget
292 ******************************************************************************/
293#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
294static void balloon3_udc_command(int cmd)
295{
296 if (cmd == PXA2XX_UDC_CMD_CONNECT)
297 UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
298 else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
299 UP2OCR &= ~UP2OCR_DPPUE;
300}
301
302static int balloon3_udc_is_connected(void)
303{
304 return 1;
305}
306
307static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
308 .udc_command = balloon3_udc_command,
309 .udc_is_connected = balloon3_udc_is_connected,
310 .gpio_pullup = -1,
311};
312
313static void __init balloon3_udc_init(void)
314{
315 pxa_set_udc_info(&balloon3_udc_info);
316 platform_device_register(&balloon3_gpio_vbus);
317}
318#else
319static inline void balloon3_udc_init(void) {}
320#endif
321
322/******************************************************************************
323 * IrDA
324 ******************************************************************************/
325#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
326static struct pxaficp_platform_data balloon3_ficp_platform_data = {
327 .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF,
328};
329
330static void __init balloon3_irda_init(void)
331{
332 pxa_set_ficp_info(&balloon3_ficp_platform_data);
333}
334#else
335static inline void balloon3_irda_init(void) {}
336#endif
337
338/******************************************************************************
339 * USB Host
340 ******************************************************************************/
341#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
342static struct pxaohci_platform_data balloon3_ohci_info = {
343 .port_mode = PMM_PERPORT_MODE,
344 .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
345};
346
347static void __init balloon3_uhc_init(void)
348{
349 if (!balloon3_has(BALLOON3_FEATURE_OHCI))
350 return;
351 pxa_set_ohci_info(&balloon3_ohci_info);
352}
353#else
354static inline void balloon3_uhc_init(void) {}
355#endif
356
357/******************************************************************************
358 * LEDs
359 ******************************************************************************/
360#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
361struct gpio_led balloon3_gpio_leds[] = {
362 {
363 .name = "balloon3:green:idle",
364 .default_trigger = "heartbeat",
365 .gpio = BALLOON3_GPIO_LED_IDLE,
366 .active_low = 1,
367 }, {
368 .name = "balloon3:green:nand",
369 .default_trigger = "nand-disk",
370 .gpio = BALLOON3_GPIO_LED_NAND,
371 .active_low = 1,
372 },
373};
374
375static struct gpio_led_platform_data balloon3_gpio_led_info = {
376 .leds = balloon3_gpio_leds,
377 .num_leds = ARRAY_SIZE(balloon3_gpio_leds),
378};
379
380static struct platform_device balloon3_leds = {
381 .name = "leds-gpio",
382 .id = 0,
383 .dev = {
384 .platform_data = &balloon3_gpio_led_info,
385 }
386};
387
388struct gpio_led balloon3_pcf_gpio_leds[] = {
389 {
390 .name = "balloon3:green:led0",
391 .gpio = BALLOON3_PCF_GPIO_LED0,
392 .active_low = 1,
393 }, {
394 .name = "balloon3:green:led1",
395 .gpio = BALLOON3_PCF_GPIO_LED1,
396 .active_low = 1,
397 }, {
398 .name = "balloon3:orange:led2",
399 .gpio = BALLOON3_PCF_GPIO_LED2,
400 .active_low = 1,
401 }, {
402 .name = "balloon3:orange:led3",
403 .gpio = BALLOON3_PCF_GPIO_LED3,
404 .active_low = 1,
405 }, {
406 .name = "balloon3:orange:led4",
407 .gpio = BALLOON3_PCF_GPIO_LED4,
408 .active_low = 1,
409 }, {
410 .name = "balloon3:orange:led5",
411 .gpio = BALLOON3_PCF_GPIO_LED5,
412 .active_low = 1,
413 }, {
414 .name = "balloon3:red:led6",
415 .gpio = BALLOON3_PCF_GPIO_LED6,
416 .active_low = 1,
417 }, {
418 .name = "balloon3:red:led7",
419 .gpio = BALLOON3_PCF_GPIO_LED7,
420 .active_low = 1,
421 },
422};
423
424static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
425 .leds = balloon3_pcf_gpio_leds,
426 .num_leds = ARRAY_SIZE(balloon3_pcf_gpio_leds),
427};
428
429static struct platform_device balloon3_pcf_leds = {
430 .name = "leds-gpio",
431 .id = 1,
432 .dev = {
433 .platform_data = &balloon3_pcf_gpio_led_info,
434 }
435};
436
437static void __init balloon3_leds_init(void)
438{
439 platform_device_register(&balloon3_leds);
440 platform_device_register(&balloon3_pcf_leds);
441}
442#else
443static inline void balloon3_leds_init(void) {}
444#endif
445
446/******************************************************************************
447 * FPGA IRQ
448 ******************************************************************************/
76static void balloon3_mask_irq(unsigned int irq) 449static void balloon3_mask_irq(unsigned int irq)
77{ 450{
78 int balloon3_irq = (irq - BALLOON3_IRQ(0)); 451 int balloon3_irq = (irq - BALLOON3_IRQ(0));
@@ -98,7 +471,6 @@ static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
98{ 471{
99 unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) & 472 unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
100 balloon3_irq_enabled; 473 balloon3_irq_enabled;
101
102 do { 474 do {
103 /* clear useless edge notification */ 475 /* clear useless edge notification */
104 if (desc->chip->ack) 476 if (desc->chip->ack)
@@ -132,201 +504,259 @@ static void __init balloon3_init_irq(void)
132 "enabled\n", __func__, BALLOON3_AUX_NIRQ); 504 "enabled\n", __func__, BALLOON3_AUX_NIRQ);
133} 505}
134 506
135static unsigned long balloon3_ac97_pin_config[] = { 507/******************************************************************************
136 GPIO28_AC97_BITCLK, 508 * GPIO expander
137 GPIO29_AC97_SDATA_IN_0, 509 ******************************************************************************/
138 GPIO30_AC97_SDATA_OUT, 510#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
139 GPIO31_AC97_SYNC, 511static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
140 GPIO113_AC97_nRESET, 512 .gpio_base = BALLOON3_PCF_GPIO_BASE,
141}; 513 .n_latch = 0,
142 514 .setup = NULL,
143static void balloon3_backlight_power(int on) 515 .teardown = NULL,
144{ 516 .context = NULL,
145 pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
146 gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
147}
148
149static unsigned long balloon3_lcd_pin_config[] = {
150 /* LCD - 16bpp Active TFT */
151 GPIOxx_LCD_TFT_16BPP,
152
153 GPIO99_GPIO, /* Backlight */
154}; 517};
155 518
156static struct pxafb_mode_info balloon3_lcd_modes[] = { 519static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
157 { 520 {
158 .pixclock = 38000, 521 I2C_BOARD_INFO("pcf8574a", 0x38),
159 .xres = 480, 522 .platform_data = &balloon3_pcf857x_pdata,
160 .yres = 640,
161 .bpp = 16,
162 .hsync_len = 8,
163 .left_margin = 8,
164 .right_margin = 8,
165 .vsync_len = 2,
166 .upper_margin = 4,
167 .lower_margin = 5,
168 .sync = 0,
169 }, 523 },
170}; 524};
171 525
172static struct pxafb_mach_info balloon3_pxafb_info = { 526static void __init balloon3_i2c_init(void)
173 .modes = balloon3_lcd_modes, 527{
174 .num_modes = ARRAY_SIZE(balloon3_lcd_modes), 528 pxa_set_i2c_info(NULL);
175 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, 529 i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
176 .pxafb_backlight_power = balloon3_backlight_power, 530}
177}; 531#else
532static inline void balloon3_i2c_init(void) {}
533#endif
534
535/******************************************************************************
536 * NAND
537 ******************************************************************************/
538#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
539static uint16_t balloon3_ctl =
540 BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
541 BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
542 BALLOON3_NAND_CONTROL_FLWP;
543
544static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
545{
546 struct nand_chip *this = mtd->priv;
178 547
179static unsigned long balloon3_mmc_pin_config[] = { 548 if (ctrl & NAND_CTRL_CHANGE) {
180 GPIO32_MMC_CLK, 549 if (ctrl & NAND_CLE)
181 GPIO92_MMC_DAT_0, 550 balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE;
182 GPIO109_MMC_DAT_1, 551 else
183 GPIO110_MMC_DAT_2, 552 balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE;
184 GPIO111_MMC_DAT_3,
185 GPIO112_MMC_CMD,
186};
187 553
188static void balloon3_mci_setpower(struct device *dev, unsigned int vdd) 554 if (ctrl & NAND_ALE)
189{ 555 balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE;
190 struct pxamci_platform_data *p_d = dev->platform_data; 556 else
191 557 balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE;
192 if ((1 << vdd) & p_d->ocr_mask) { 558
193 pr_debug("%s: on\n", __func__); 559 __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
194 /* FIXME something to prod here? */
195 } else {
196 pr_debug("%s: off\n", __func__);
197 /* FIXME something to prod here? */
198 } 560 }
561
562 if (cmd != NAND_CMD_NONE)
563 writeb(cmd, this->IO_ADDR_W);
199} 564}
200 565
201static struct pxamci_platform_data balloon3_mci_platform_data = { 566static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
202 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, 567{
203 .setpower = balloon3_mci_setpower, 568 if (chip < 0 || chip > 3)
204}; 569 return;
205 570
206static int balloon3_udc_is_connected(void) 571 balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 |
572 BALLOON3_NAND_CONTROL_FLCE1 |
573 BALLOON3_NAND_CONTROL_FLCE2 |
574 BALLOON3_NAND_CONTROL_FLCE3;
575
576 /* Deassert correct nCE line */
577 balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip);
578
579 __raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
580}
581
582static int balloon3_nand_probe(struct platform_device *pdev)
207{ 583{
208 pr_debug("%s: udc connected\n", __func__); 584 void __iomem *temp_map;
209 return 1; 585 uint16_t ver;
586 int ret;
587
588 __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG);
589
590 ver = __raw_readw(BALLOON3_FPGA_VER);
591 if (ver > 0x0201)
592 pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
593 "NAND support might be broken in this version!", ver);
594
595 /* Power up the NAND chips */
596 ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
597 if (ret)
598 goto err1;
599
600 ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
601 if (ret)
602 goto err2;
603
604 gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
605
606 /* Deassert all nCE lines and write protect line */
607 __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
608 return 0;
609
610err2:
611 gpio_free(BALLOON3_GPIO_RUN_NAND);
612err1:
613 return ret;
210} 614}
211 615
212static void balloon3_udc_command(int cmd) 616static void balloon3_nand_remove(struct platform_device *pdev)
213{ 617{
214 switch (cmd) { 618 /* Power down the NAND chips */
215 case PXA2XX_UDC_CMD_CONNECT: 619 gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
216 UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE); 620 gpio_free(BALLOON3_GPIO_RUN_NAND);
217 pr_debug("%s: connect\n", __func__);
218 break;
219 case PXA2XX_UDC_CMD_DISCONNECT:
220 UP2OCR &= ~UP2OCR_DPPUE;
221 pr_debug("%s: disconnect\n", __func__);
222 break;
223 }
224} 621}
225 622
226static struct pxa2xx_udc_mach_info balloon3_udc_info = { 623static struct mtd_partition balloon3_partition_info[] = {
227 .udc_is_connected = balloon3_udc_is_connected, 624 [0] = {
228 .udc_command = balloon3_udc_command, 625 .name = "Boot",
626 .offset = 0,
627 .size = SZ_4M,
628 },
629 [1] = {
630 .name = "RootFS",
631 .offset = MTDPART_OFS_APPEND,
632 .size = MTDPART_SIZ_FULL
633 },
229}; 634};
230 635
231static struct pxaficp_platform_data balloon3_ficp_platform_data = { 636static const char *balloon3_part_probes[] = { "cmdlinepart", NULL };
232 .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
233};
234 637
235static unsigned long balloon3_ohci_pin_config[] = { 638struct platform_nand_data balloon3_nand_pdata = {
236 GPIO88_USBH1_PWR, 639 .chip = {
237 GPIO89_USBH1_PEN, 640 .nr_chips = 4,
641 .chip_offset = 0,
642 .nr_partitions = ARRAY_SIZE(balloon3_partition_info),
643 .partitions = balloon3_partition_info,
644 .chip_delay = 50,
645 .part_probe_types = balloon3_part_probes,
646 },
647 .ctrl = {
648 .hwcontrol = 0,
649 .dev_ready = 0,
650 .select_chip = balloon3_nand_select_chip,
651 .cmd_ctrl = balloon3_nand_cmd_ctl,
652 .probe = balloon3_nand_probe,
653 .remove = balloon3_nand_remove,
654 },
238}; 655};
239 656
240static struct pxaohci_platform_data balloon3_ohci_platform_data = { 657static struct resource balloon3_nand_resource[] = {
241 .port_mode = PMM_PERPORT_MODE, 658 [0] = {
242 .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, 659 .start = BALLOON3_NAND_BASE,
660 .end = BALLOON3_NAND_BASE + 0x4,
661 .flags = IORESOURCE_MEM,
662 },
243}; 663};
244 664
245static unsigned long balloon3_pin_config[] __initdata = { 665static struct platform_device balloon3_nand = {
246 /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */ 666 .name = "gen_nand",
247 GPIO42_BTUART_RXD, 667 .num_resources = ARRAY_SIZE(balloon3_nand_resource),
248 GPIO43_BTUART_TXD, 668 .resource = balloon3_nand_resource,
249 GPIO44_BTUART_CTS, 669 .id = -1,
250 GPIO45_BTUART_RTS, 670 .dev = {
251 671 .platform_data = &balloon3_nand_pdata,
252 /* Wakeup GPIO */ 672 }
253 GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
254
255 /* NAND & IDLE LED GPIOs */
256 GPIO9_GPIO,
257 GPIO10_GPIO,
258}; 673};
259 674
260static struct gpio_led balloon3_gpio_leds[] = { 675static void __init balloon3_nand_init(void)
676{
677 platform_device_register(&balloon3_nand);
678}
679#else
680static inline void balloon3_nand_init(void) {}
681#endif
682
683/******************************************************************************
684 * Core power regulator
685 ******************************************************************************/
686#if defined(CONFIG_REGULATOR_MAX1586) || \
687 defined(CONFIG_REGULATOR_MAX1586_MODULE)
688static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
261 { 689 {
262 .name = "balloon3:green:idle", 690 .supply = "vcc_core",
263 .default_trigger = "heartbeat", 691 }
264 .gpio = BALLOON3_GPIO_LED_IDLE, 692};
265 .active_low = 1, 693
694static struct regulator_init_data balloon3_max1587a_v3_info = {
695 .constraints = {
696 .name = "vcc_core range",
697 .min_uV = 900000,
698 .max_uV = 1705000,
699 .always_on = 1,
700 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
266 }, 701 },
702 .consumer_supplies = balloon3_max1587a_consumers,
703 .num_consumer_supplies = ARRAY_SIZE(balloon3_max1587a_consumers),
704};
705
706static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
267 { 707 {
268 .name = "balloon3:green:nand", 708 .name = "vcc_core",
269 .default_trigger = "nand-disk", 709 .id = MAX1586_V3,
270 .gpio = BALLOON3_GPIO_LED_NAND, 710 .platform_data = &balloon3_max1587a_v3_info,
271 .active_low = 1, 711 }
272 },
273}; 712};
274 713
275static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = { 714static struct max1586_platform_data balloon3_max1587a_info = {
276 .leds = balloon3_gpio_leds, 715 .subdevs = balloon3_max1587a_subdevs,
277 .num_leds = ARRAY_SIZE(balloon3_gpio_leds), 716 .num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
717 .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
278}; 718};
279 719
280static struct platform_device balloon3led_device = { 720static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
281 .name = "leds-gpio", 721 {
282 .id = -1, 722 I2C_BOARD_INFO("max1586", 0x14),
283 .dev = { 723 .platform_data = &balloon3_max1587a_info,
284 .platform_data = &balloon3_gpio_leds_platform_data,
285 }, 724 },
286}; 725};
287 726
288static void __init balloon3_init(void) 727static void __init balloon3_pmic_init(void)
289{ 728{
290 pr_info("Initialising Balloon3\n"); 729 pxa27x_set_i2c_power_info(NULL);
730 i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
731}
732#else
733static inline void balloon3_pmic_init(void) {}
734#endif
291 735
292 /* system bus arbiter setting 736/******************************************************************************
293 * - Core_Park 737 * Machine init
294 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 738 ******************************************************************************/
295 */ 739static void __init balloon3_init(void)
740{
296 ARB_CNTRL = ARB_CORE_PARK | 0x234; 741 ARB_CNTRL = ARB_CORE_PARK | 0x234;
297 742
743 pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
744
298 pxa_set_ffuart_info(NULL); 745 pxa_set_ffuart_info(NULL);
299 pxa_set_btuart_info(NULL); 746 pxa_set_btuart_info(NULL);
300 pxa_set_stuart_info(NULL); 747 pxa_set_stuart_info(NULL);
301 748
302 pxa_set_i2c_info(NULL); 749 balloon3_i2c_init();
303 if (balloon3_has(BALLOON3_FEATURE_AUDIO)) { 750 balloon3_irda_init();
304 pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config)); 751 balloon3_lcd_init();
305 pxa_set_ac97_info(NULL); 752 balloon3_leds_init();
306 } 753 balloon3_mmc_init();
307 754 balloon3_nand_init();
308 if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) { 755 balloon3_nor_init();
309 pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config)); 756 balloon3_pmic_init();
310 gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, 757 balloon3_ts_init();
311 "LCD Backlight Power"); 758 balloon3_udc_init();
312 gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1); 759 balloon3_uhc_init();
313 set_pxa_fb_info(&balloon3_pxafb_info);
314 }
315
316 if (balloon3_has(BALLOON3_FEATURE_MMC)) {
317 pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
318 pxa_set_mci_info(&balloon3_mci_platform_data);
319 }
320 pxa_set_ficp_info(&balloon3_ficp_platform_data);
321 if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
322 pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
323 pxa_set_ohci_info(&balloon3_ohci_platform_data);
324 }
325 pxa_set_udc_info(&balloon3_udc_info);
326
327 pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
328
329 platform_device_register(&balloon3led_device);
330} 760}
331 761
332static struct map_desc balloon3_io_desc[] __initdata = { 762static struct map_desc balloon3_io_desc[] __initdata = {
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-19 03:33:40 -0400