1 files changed, 7 insertions, 118 deletions

diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 80b62329f58..a9cef9703d5 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -29,6 +29,7 @@
 #include <asm/arch/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "tsx09-common.h"
 
 #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
 #define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
@@ -186,95 +187,6 @@ static int __init qnap_ts209_pci_init(void)
 subsys_initcall(qnap_ts209_pci_init);
 
 /*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
-        .phy_addr       = 8,
-};
-
-static int __init parse_hex_nibble(char n)
-{
-        if (n >= '0' && n <= '9')
-                return n - '0';
-
-        if (n >= 'A' && n <= 'F')
-                return n - 'A' + 10;
-
-        if (n >= 'a' && n <= 'f')
-                return n - 'a' + 10;
-
-        return -1;
-}
-
-static int __init parse_hex_byte(const char *b)
-{
-        int hi;
-        int lo;
-
-        hi = parse_hex_nibble(b[0]);
-        lo = parse_hex_nibble(b[1]);
-
-        if (hi < 0 || lo < 0)
-                return -1;
-
-        return (hi << 4) | lo;
-}
-
-static int __init check_mac_addr(const char *addr_str)
-{
-        u_int8_t addr[6];
-        int i;
-
-        for (i = 0; i < 6; i++) {
-                int byte;
-
-                /*
-                 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
-                 */
-                if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
-                        return -1;
-
-                byte = parse_hex_byte(addr_str + (i * 3));
-                if (byte < 0)
-                        return -1;
-                addr[i] = byte;
-        }
-
-        printk(KERN_INFO "ts209: found ethernet mac address ");
-        for (i = 0; i < 6; i++)
-                printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
-
-        memcpy(qnap_ts209_eth_data.mac_addr, addr, 6);
-
-        return 0;
-}
-
-/*
- * The 'NAS Config' flash partition has an ext2 filesystem which
- * contains a file that has the ethernet MAC address in plain text
- * (format "xx:xx:xx:xx:xx:xx\n".)
- */
-static void __init ts209_find_mac_addr(void)
-{
-        unsigned long addr;
-
-        for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
-                char *nor_page;
-                int ret = 0;
-
-                nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024);
-                if (nor_page != NULL) {
-                        ret = check_mac_addr(nor_page);
-                        iounmap(nor_page);
-                }
-
-                if (ret == 0)
-                        break;
-        }
-}
-
-/*****************************************************************************
  * RTC S35390A on I2C bus
  ****************************************************************************/
 
@@ -356,31 +268,6 @@ static struct orion5x_mpp_mode ts209_mpp_modes[] __initdata = {
         { -1 },
 };
 
-/*
- * QNAP TS-[12]09 specific power off method via UART1-attached PIC
- */
-#define UART1_REG(x)    (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-static void qnap_ts209_power_off(void)
-{
-        /* 19200 baud divisor */
-        const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
-
-        pr_info("%s: triggering power-off...\n", __func__);
-
-        /* hijack uart1 and reset into sane state (19200,8n1) */
-        orion5x_write(UART1_REG(LCR), 0x83);
-        orion5x_write(UART1_REG(DLL), divisor & 0xff);
-        orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
-        orion5x_write(UART1_REG(LCR), 0x03);
-        orion5x_write(UART1_REG(IER), 0x00);
-        orion5x_write(UART1_REG(FCR), 0x00);
-        orion5x_write(UART1_REG(MCR), 0x00);
-
-        /* send the power-off command 'A' to PIC */
-        orion5x_write(UART1_REG(TX), 'A');
-}
-
 static void __init qnap_ts209_init(void)
 {
         /*
@@ -402,8 +289,10 @@ static void __init qnap_ts209_init(void)
          */
         orion5x_ehci0_init();
         orion5x_ehci1_init();
-        ts209_find_mac_addr();
-        orion5x_eth_init(&qnap_ts209_eth_data);
+        qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
+                                 qnap_ts209_partitions[5].offset,
+                                 qnap_ts209_partitions[5].size);
+        orion5x_eth_init(&qnap_tsx09_eth_data);
         orion5x_i2c_init();
         orion5x_sata_init(&qnap_ts209_sata_data);
         orion5x_uart0_init();
@@ -425,8 +314,8 @@ static void __init qnap_ts209_init(void)
                 pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
         i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
-        /* register ts209 specific power-off method */
-        pm_power_off = qnap_ts209_power_off;
+        /* register tsx09 specific power-off method */
+        pm_power_off = qnap_tsx09_power_off;
 }
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")