1 files changed, 22 insertions, 22 deletions

diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 42580757930..19cf5bf99f1 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -267,28 +267,28 @@ static struct platform_device d2net_gpio_buttons = {
  * General Setup
  ****************************************************************************/
 
-static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
-        {  0, MPP_GPIO },       /* Board ID (bit 0) */
-        {  1, MPP_GPIO },       /* Board ID (bit 1) */
-        {  2, MPP_GPIO },       /* Board ID (bit 2) */
-        {  3, MPP_GPIO },       /* SATA 0 power */
-        {  4, MPP_UNUSED },
-        {  5, MPP_GPIO },       /* Fan fail detection */
-        {  6, MPP_GPIO },       /* Red front LED */
-        {  7, MPP_UNUSED },
-        {  8, MPP_GPIO },       /* Rear power switch (on|auto) */
-        {  9, MPP_GPIO },       /* Rear power switch (auto|off) */
-        { 10, MPP_UNUSED },
-        { 11, MPP_UNUSED },
-        { 12, MPP_GPIO },       /* SATA 1 power */
-        { 13, MPP_UNUSED },
-        { 14, MPP_SATA_LED },   /* SATA 0 active */
-        { 15, MPP_SATA_LED },   /* SATA 1 active */
-        { 16, MPP_GPIO },       /* Blue front LED blink control */
-        { 17, MPP_UNUSED },
-        { 18, MPP_GPIO },       /* Front button (0 = Released, 1 = Pushed ) */
-        { 19, MPP_UNUSED },
-        { -1 }
+static unsigned int d2net_mpp_modes[] __initdata = {
+        MPP0_GPIO,      /* Board ID (bit 0) */
+        MPP1_GPIO,      /* Board ID (bit 1) */
+        MPP2_GPIO,      /* Board ID (bit 2) */
+        MPP3_GPIO,      /* SATA 0 power */
+        MPP4_UNUSED,
+        MPP5_GPIO,      /* Fan fail detection */
+        MPP6_GPIO,      /* Red front LED */
+        MPP7_UNUSED,
+        MPP8_GPIO,      /* Rear power switch (on|auto) */
+        MPP9_GPIO,      /* Rear power switch (auto|off) */
+        MPP10_UNUSED,
+        MPP11_UNUSED,
+        MPP12_GPIO,     /* SATA 1 power */
+        MPP13_UNUSED,
+        MPP14_SATA_LED, /* SATA 0 active */
+        MPP15_SATA_LED, /* SATA 1 active */
+        MPP16_GPIO,     /* Blue front LED blink control */
+        MPP17_UNUSED,
+        MPP18_GPIO,     /* Front button (0 = Released, 1 = Pushed ) */
+        MPP19_UNUSED,
+        0,
         /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
         /* 23: Blue front LED off */
         /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */