1 files changed, 17 insertions, 13 deletions

diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 00bb1fc5e01..9a2a31e011c 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = {
 
 static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
-        twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
-        twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
-
         if (gpio_is_valid(dssdev->reset_gpio))
                 gpio_set_value_cansleep(dssdev->reset_gpio, 1);
         return 0;
@@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[];
 static int devkit8000_twl_gpio_setup(struct device *dev,
                 unsigned gpio, unsigned ngpio)
 {
+        int ret;
+
         omap_mux_init_gpio(29, OMAP_PIN_INPUT);
         /* gpio + 0 is "mmc0_cd" (input/IRQ) */
         mmc[0].gpio_cd = gpio + 0;
@@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
         /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
         gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
-        /* gpio + 1 is "LCD_PWREN" (out, active high) */
-        devkit8000_lcd_device.reset_gpio = gpio + 1;
-        gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
-        /* Disable until needed */
-        gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+        /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
+        devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
+        ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
+                        GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN");
+        if (ret < 0) {
+                devkit8000_lcd_device.reset_gpio = -EINVAL;
+                printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
+        }
 
         /* gpio + 7 is "DVI_PD" (out, active low) */
         devkit8000_dvi_device.reset_gpio = gpio + 7;
-        gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
-        /* Disable until needed */
-        gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
+        ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
+                        GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown");
+        if (ret < 0) {
+                devkit8000_dvi_device.reset_gpio = -EINVAL;
+                printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
+        }
 
         return 0;
 }
@@ -275,8 +280,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
         .irq_base       = TWL4030_GPIO_IRQ_BASE,
         .irq_end        = TWL4030_GPIO_IRQ_END,
         .use_leds       = true,
-        .pullups        = BIT(1),
-        .pulldowns      = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+        .pulldowns      = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
                                 | BIT(15) | BIT(16) | BIT(17),
         .setup          = devkit8000_twl_gpio_setup,
 };