diff options
Diffstat (limited to 'arch/arm/mach-omap1')
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/gpio.h | 5 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/smp.h | 5 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/system.h | 5 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/vmalloc.h | 20 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/leds-h2p2-debug.c | 167 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/leds-innovator.c | 99 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/leds-osk.c | 115 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/leds.c | 69 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/leds.h | 3 |
9 files changed, 488 insertions, 0 deletions
diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h new file mode 100644 index 00000000000..e737706a8fe --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/gpio.h | |||
| @@ -0,0 +1,5 @@ | |||
| 1 | /* | ||
| 2 | * arch/arm/mach-omap1/include/mach/gpio.h | ||
| 3 | */ | ||
| 4 | |||
| 5 | #include <plat/gpio.h> | ||
diff --git a/arch/arm/mach-omap1/include/mach/smp.h b/arch/arm/mach-omap1/include/mach/smp.h new file mode 100644 index 00000000000..80a371c06e5 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/smp.h | |||
| @@ -0,0 +1,5 @@ | |||
| 1 | /* | ||
| 2 | * arch/arm/mach-omap1/include/mach/smp.h | ||
| 3 | */ | ||
| 4 | |||
| 5 | #include <plat/smp.h> | ||
diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h new file mode 100644 index 00000000000..a6c1b3a16df --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/system.h | |||
| @@ -0,0 +1,5 @@ | |||
| 1 | /* | ||
| 2 | * arch/arm/mach-omap1/include/mach/system.h | ||
| 3 | */ | ||
| 4 | |||
| 5 | #include <plat/system.h> | ||
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h new file mode 100644 index 00000000000..22ec4a47957 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/vmalloc.h | |||
| @@ -0,0 +1,20 @@ | |||
| 1 | /* | ||
| 2 | * arch/arm/mach-omap1/include/mach/vmalloc.h | ||
| 3 | * | ||
| 4 | * Copyright (C) 2000 Russell King. | ||
| 5 | * | ||
| 6 | * This program is free software; you can redistribute it and/or modify | ||
| 7 | * it under the terms of the GNU General Public License as published by | ||
| 8 | * the Free Software Foundation; either version 2 of the License, or | ||
| 9 | * (at your option) any later version. | ||
| 10 | * | ||
| 11 | * This program is distributed in the hope that it will be useful, | ||
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
| 14 | * GNU General Public License for more details. | ||
| 15 | * | ||
| 16 | * You should have received a copy of the GNU General Public License | ||
| 17 | * along with this program; if not, write to the Free Software | ||
| 18 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | ||
| 19 | */ | ||
| 20 | #define VMALLOC_END 0xd8000000UL | ||
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c new file mode 100644 index 00000000000..b4f9be52e1e --- /dev/null +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c | |||
| @@ -0,0 +1,167 @@ | |||
| 1 | /* | ||
| 2 | * linux/arch/arm/mach-omap1/leds-h2p2-debug.c | ||
| 3 | * | ||
| 4 | * Copyright 2003 by Texas Instruments Incorporated | ||
| 5 | * | ||
| 6 | * There are 16 LEDs on the debug board (all green); four may be used | ||
| 7 | * for logical 'green', 'amber', 'red', and 'blue' (after "claiming"). | ||
| 8 | * | ||
| 9 | * The "surfer" expansion board and H2 sample board also have two-color | ||
| 10 | * green+red LEDs (in parallel), used here for timer and idle indicators. | ||
| 11 | */ | ||
| 12 | #include <linux/init.h> | ||
| 13 | #include <linux/kernel_stat.h> | ||
| 14 | #include <linux/sched.h> | ||
| 15 | #include <linux/io.h> | ||
| 16 | |||
| 17 | #include <mach/hardware.h> | ||
| 18 | #include <asm/leds.h> | ||
| 19 | #include <asm/system.h> | ||
| 20 | #include <asm/mach-types.h> | ||
| 21 | |||
| 22 | #include <plat/fpga.h> | ||
| 23 | #include <mach/gpio.h> | ||
| 24 | |||
| 25 | #include "leds.h" | ||
| 26 | |||
| 27 | |||
| 28 | #define GPIO_LED_RED 3 | ||
| 29 | #define GPIO_LED_GREEN OMAP_MPUIO(4) | ||
| 30 | |||
| 31 | |||
| 32 | #define LED_STATE_ENABLED 0x01 | ||
| 33 | #define LED_STATE_CLAIMED 0x02 | ||
| 34 | #define LED_TIMER_ON 0x04 | ||
| 35 | |||
| 36 | #define GPIO_IDLE GPIO_LED_GREEN | ||
| 37 | #define GPIO_TIMER GPIO_LED_RED | ||
| 38 | |||
| 39 | |||
| 40 | void h2p2_dbg_leds_event(led_event_t evt) | ||
| 41 | { | ||
| 42 | unsigned long flags; | ||
| 43 | |||
| 44 | static struct h2p2_dbg_fpga __iomem *fpga; | ||
| 45 | static u16 led_state, hw_led_state; | ||
| 46 | |||
| 47 | local_irq_save(flags); | ||
| 48 | |||
| 49 | if (!(led_state & LED_STATE_ENABLED) && evt != led_start) | ||
| 50 | goto done; | ||
| 51 | |||
| 52 | switch (evt) { | ||
| 53 | case led_start: | ||
| 54 | if (!fpga) | ||
| 55 | fpga = ioremap(H2P2_DBG_FPGA_START, | ||
| 56 | H2P2_DBG_FPGA_SIZE); | ||
| 57 | if (fpga) { | ||
| 58 | led_state |= LED_STATE_ENABLED; | ||
| 59 | __raw_writew(~0, &fpga->leds); | ||
| 60 | } | ||
| 61 | break; | ||
| 62 | |||
| 63 | case led_stop: | ||
| 64 | case led_halted: | ||
| 65 | /* all leds off during suspend or shutdown */ | ||
| 66 | |||
| 67 | if (! machine_is_omap_perseus2()) { | ||
| 68 | gpio_set_value(GPIO_TIMER, 0); | ||
| 69 | gpio_set_value(GPIO_IDLE, 0); | ||
| 70 | } | ||
| 71 | |||
| 72 | __raw_writew(~0, &fpga->leds); | ||
| 73 | led_state &= ~LED_STATE_ENABLED; | ||
| 74 | if (evt == led_halted) { | ||
| 75 | iounmap(fpga); | ||
| 76 | fpga = NULL; | ||
| 77 | } | ||
| 78 | |||
| 79 | goto done; | ||
| 80 | |||
| 81 | case led_claim: | ||
| 82 | led_state |= LED_STATE_CLAIMED; | ||
| 83 | hw_led_state = 0; | ||
| 84 | break; | ||
| 85 | |||
| 86 | case led_release: | ||
| 87 | led_state &= ~LED_STATE_CLAIMED; | ||
| 88 | break; | ||
| 89 | |||
| 90 | #ifdef CONFIG_LEDS_TIMER | ||
| 91 | case led_timer: | ||
| 92 | led_state ^= LED_TIMER_ON; | ||
| 93 | |||
| 94 | if (machine_is_omap_perseus2()) | ||
| 95 | hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER; | ||
| 96 | else { | ||
| 97 | gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON); | ||
| 98 | goto done; | ||
| 99 | } | ||
| 100 | |||
| 101 | break; | ||
| 102 | #endif | ||
| 103 | |||
| 104 | #ifdef CONFIG_LEDS_CPU | ||
| 105 | case led_idle_start: | ||
| 106 | if (machine_is_omap_perseus2()) | ||
| 107 | hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE; | ||
| 108 | else { | ||
| 109 | gpio_set_value(GPIO_IDLE, 1); | ||
| 110 | goto done; | ||
| 111 | } | ||
| 112 | |||
| 113 | break; | ||
| 114 | |||
| 115 | case led_idle_end: | ||
| 116 | if (machine_is_omap_perseus2()) | ||
| 117 | hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE; | ||
| 118 | else { | ||
| 119 | gpio_set_value(GPIO_IDLE, 0); | ||
| 120 | goto done; | ||
| 121 | } | ||
| 122 | |||
| 123 | break; | ||
| 124 | #endif | ||
| 125 | |||
| 126 | case led_green_on: | ||
| 127 | hw_led_state |= H2P2_DBG_FPGA_LED_GREEN; | ||
| 128 | break; | ||
| 129 | case led_green_off: | ||
| 130 | hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN; | ||
| 131 | break; | ||
| 132 | |||
| 133 | case led_amber_on: | ||
| 134 | hw_led_state |= H2P2_DBG_FPGA_LED_AMBER; | ||
| 135 | break; | ||
| 136 | case led_amber_off: | ||
| 137 | hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER; | ||
| 138 | break; | ||
| 139 | |||
| 140 | case led_red_on: | ||
| 141 | hw_led_state |= H2P2_DBG_FPGA_LED_RED; | ||
| 142 | break; | ||
| 143 | case led_red_off: | ||
| 144 | hw_led_state &= ~H2P2_DBG_FPGA_LED_RED; | ||
| 145 | break; | ||
| 146 | |||
| 147 | case led_blue_on: | ||
| 148 | hw_led_state |= H2P2_DBG_FPGA_LED_BLUE; | ||
| 149 | break; | ||
| 150 | case led_blue_off: | ||
| 151 | hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE; | ||
| 152 | break; | ||
| 153 | |||
| 154 | default: | ||
| 155 | break; | ||
| 156 | } | ||
| 157 | |||
| 158 | |||
| 159 | /* | ||
| 160 | * Actually burn the LEDs | ||
| 161 | */ | ||
| 162 | if (led_state & LED_STATE_ENABLED) | ||
| 163 | __raw_writew(~hw_led_state, &fpga->leds); | ||
| 164 | |||
| 165 | done: | ||
| 166 | local_irq_restore(flags); | ||
| 167 | } | ||
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c new file mode 100644 index 00000000000..9b99c289462 --- /dev/null +++ b/arch/arm/mach-omap1/leds-innovator.c | |||
| @@ -0,0 +1,99 @@ | |||
| 1 | /* | ||
| 2 | * linux/arch/arm/mach-omap1/leds-innovator.c | ||
| 3 | */ | ||
| 4 | #include <linux/init.h> | ||
| 5 | |||
| 6 | #include <mach/hardware.h> | ||
| 7 | #include <asm/leds.h> | ||
| 8 | #include <asm/system.h> | ||
| 9 | |||
| 10 | #include "leds.h" | ||
| 11 | |||
| 12 | |||
| 13 | #define LED_STATE_ENABLED 1 | ||
| 14 | #define LED_STATE_CLAIMED 2 | ||
| 15 | |||
| 16 | static unsigned int led_state; | ||
| 17 | static unsigned int hw_led_state; | ||
| 18 | |||
| 19 | void innovator_leds_event(led_event_t evt) | ||
| 20 | { | ||
| 21 | unsigned long flags; | ||
| 22 | |||
| 23 | local_irq_save(flags); | ||
| 24 | |||
| 25 | switch (evt) { | ||
| 26 | case led_start: | ||
| 27 | hw_led_state = 0; | ||
| 28 | led_state = LED_STATE_ENABLED; | ||
| 29 | break; | ||
| 30 | |||
| 31 | case led_stop: | ||
| 32 | led_state &= ~LED_STATE_ENABLED; | ||
| 33 | hw_led_state = 0; | ||
| 34 | break; | ||
| 35 | |||
| 36 | case led_claim: | ||
| 37 | led_state |= LED_STATE_CLAIMED; | ||
| 38 | hw_led_state = 0; | ||
| 39 | break; | ||
| 40 | |||
| 41 | case led_release: | ||
| 42 | led_state &= ~LED_STATE_CLAIMED; | ||
| 43 | hw_led_state = 0; | ||
| 44 | break; | ||
| 45 | |||
| 46 | #ifdef CONFIG_LEDS_TIMER | ||
| 47 | case led_timer: | ||
| 48 | if (!(led_state & LED_STATE_CLAIMED)) | ||
| 49 | hw_led_state ^= 0; | ||
| 50 | break; | ||
| 51 | #endif | ||
| 52 | |||
| 53 | #ifdef CONFIG_LEDS_CPU | ||
| 54 | case led_idle_start: | ||
| 55 | if (!(led_state & LED_STATE_CLAIMED)) | ||
| 56 | hw_led_state |= 0; | ||
| 57 | break; | ||
| 58 | |||
| 59 | case led_idle_end: | ||
| 60 | if (!(led_state & LED_STATE_CLAIMED)) | ||
| 61 | hw_led_state &= ~0; | ||
| 62 | break; | ||
| 63 | #endif | ||
| 64 | |||
| 65 | case led_halted: | ||
| 66 | break; | ||
| 67 | |||
| 68 | case led_green_on: | ||
| 69 | if (led_state & LED_STATE_CLAIMED) | ||
| 70 | hw_led_state &= ~0; | ||
| 71 | break; | ||
| 72 | |||
| 73 | case led_green_off: | ||
| 74 | if (led_state & LED_STATE_CLAIMED) | ||
| 75 | hw_led_state |= 0; | ||
| 76 | break; | ||
| 77 | |||
| 78 | case led_amber_on: | ||
| 79 | break; | ||
| 80 | |||
| 81 | case led_amber_off: | ||
| 82 | break; | ||
| 83 | |||
| 84 | case led_red_on: | ||
| 85 | if (led_state & LED_STATE_CLAIMED) | ||
| 86 | hw_led_state &= ~0; | ||
| 87 | break; | ||
| 88 | |||
| 89 | case led_red_off: | ||
| 90 | if (led_state & LED_STATE_CLAIMED) | ||
| 91 | hw_led_state |= 0; | ||
| 92 | break; | ||
| 93 | |||
| 94 | default: | ||
| 95 | break; | ||
| 96 | } | ||
| 97 | |||
| 98 | local_irq_restore(flags); | ||
| 99 | } | ||
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c new file mode 100644 index 00000000000..499d7ad8697 --- /dev/null +++ b/arch/arm/mach-omap1/leds-osk.c | |||
| @@ -0,0 +1,115 @@ | |||
| 1 | /* | ||
| 2 | * linux/arch/arm/mach-omap1/leds-osk.c | ||
| 3 | * | ||
| 4 | * LED driver for OSK with optional Mistral QVGA board | ||
| 5 | */ | ||
| 6 | #include <linux/init.h> | ||
| 7 | |||
| 8 | #include <mach/hardware.h> | ||
| 9 | #include <asm/leds.h> | ||
| 10 | #include <asm/system.h> | ||
| 11 | |||
| 12 | #include <mach/gpio.h> | ||
| 13 | |||
| 14 | #include "leds.h" | ||
| 15 | |||
| 16 | |||
| 17 | #define LED_STATE_ENABLED (1 << 0) | ||
| 18 | #define LED_STATE_CLAIMED (1 << 1) | ||
| 19 | static u8 led_state; | ||
| 20 | |||
| 21 | #define TIMER_LED (1 << 3) /* Mistral board */ | ||
| 22 | #define IDLE_LED (1 << 4) /* Mistral board */ | ||
| 23 | static u8 hw_led_state; | ||
| 24 | |||
| 25 | |||
| 26 | #ifdef CONFIG_OMAP_OSK_MISTRAL | ||
| 27 | |||
| 28 | /* For now, all system indicators require the Mistral board, since that | ||
| 29 | * LED can be manipulated without a task context. This LED is either red, | ||
| 30 | * or green, but not both; it can't give the full "disco led" effect. | ||
| 31 | */ | ||
| 32 | |||
| 33 | #define GPIO_LED_RED 3 | ||
| 34 | #define GPIO_LED_GREEN OMAP_MPUIO(4) | ||
| 35 | |||
| 36 | static void mistral_setled(void) | ||
| 37 | { | ||
| 38 | int red = 0; | ||
| 39 | int green = 0; | ||
| 40 | |||
| 41 | if (hw_led_state & TIMER_LED) | ||
| 42 | red = 1; | ||
| 43 | else if (hw_led_state & IDLE_LED) | ||
| 44 | green = 1; | ||
| 45 | /* else both sides are disabled */ | ||
| 46 | |||
| 47 | gpio_set_value(GPIO_LED_GREEN, green); | ||
| 48 | gpio_set_value(GPIO_LED_RED, red); | ||
| 49 | } | ||
| 50 | |||
| 51 | #endif | ||
| 52 | |||
| 53 | void osk_leds_event(led_event_t evt) | ||
| 54 | { | ||
| 55 | unsigned long flags; | ||
| 56 | u16 leds; | ||
| 57 | |||
| 58 | local_irq_save(flags); | ||
| 59 | |||
| 60 | if (!(led_state & LED_STATE_ENABLED) && evt != led_start) | ||
| 61 | goto done; | ||
| 62 | |||
| 63 | leds = hw_led_state; | ||
| 64 | switch (evt) { | ||
| 65 | case led_start: | ||
| 66 | led_state |= LED_STATE_ENABLED; | ||
| 67 | hw_led_state = 0; | ||
| 68 | leds = ~0; | ||
| 69 | break; | ||
| 70 | |||
| 71 | case led_halted: | ||
| 72 | case led_stop: | ||
| 73 | led_state &= ~LED_STATE_ENABLED; | ||
| 74 | hw_led_state = 0; | ||
| 75 | break; | ||
| 76 | |||
| 77 | case led_claim: | ||
| 78 | led_state |= LED_STATE_CLAIMED; | ||
| 79 | hw_led_state = 0; | ||
| 80 | leds = ~0; | ||
| 81 | break; | ||
| 82 | |||
| 83 | case led_release: | ||
| 84 | led_state &= ~LED_STATE_CLAIMED; | ||
| 85 | hw_led_state = 0; | ||
| 86 | break; | ||
| 87 | |||
| 88 | #ifdef CONFIG_OMAP_OSK_MISTRAL | ||
| 89 | |||
| 90 | case led_timer: | ||
| 91 | hw_led_state ^= TIMER_LED; | ||
| 92 | mistral_setled(); | ||
| 93 | break; | ||
| 94 | |||
| 95 | case led_idle_start: /* idle == off */ | ||
| 96 | hw_led_state &= ~IDLE_LED; | ||
| 97 | mistral_setled(); | ||
| 98 | break; | ||
| 99 | |||
| 100 | case led_idle_end: | ||
| 101 | hw_led_state |= IDLE_LED; | ||
| 102 | mistral_setled(); | ||
| 103 | break; | ||
| 104 | |||
| 105 | #endif /* CONFIG_OMAP_OSK_MISTRAL */ | ||
| 106 | |||
| 107 | default: | ||
| 108 | break; | ||
| 109 | } | ||
| 110 | |||
| 111 | leds ^= hw_led_state; | ||
| 112 | |||
| 113 | done: | ||
| 114 | local_irq_restore(flags); | ||
| 115 | } | ||
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c new file mode 100644 index 00000000000..22eb11dde9e --- /dev/null +++ b/arch/arm/mach-omap1/leds.c | |||
| @@ -0,0 +1,69 @@ | |||
| 1 | /* | ||
| 2 | * linux/arch/arm/mach-omap1/leds.c | ||
| 3 | * | ||
| 4 | * OMAP LEDs dispatcher | ||
| 5 | */ | ||
| 6 | #include <linux/kernel.h> | ||
| 7 | #include <linux/init.h> | ||
| 8 | |||
| 9 | #include <asm/leds.h> | ||
| 10 | #include <asm/mach-types.h> | ||
| 11 | |||
| 12 | #include <mach/gpio.h> | ||
| 13 | #include <plat/mux.h> | ||
| 14 | |||
| 15 | #include "leds.h" | ||
| 16 | |||
| 17 | static int __init | ||
| 18 | omap_leds_init(void) | ||
| 19 | { | ||
| 20 | if (!cpu_class_is_omap1()) | ||
| 21 | return -ENODEV; | ||
| 22 | |||
| 23 | if (machine_is_omap_innovator()) | ||
| 24 | leds_event = innovator_leds_event; | ||
| 25 | |||
| 26 | else if (machine_is_omap_h2() | ||
| 27 | || machine_is_omap_h3() | ||
| 28 | || machine_is_omap_perseus2()) | ||
| 29 | leds_event = h2p2_dbg_leds_event; | ||
| 30 | |||
| 31 | else if (machine_is_omap_osk()) | ||
| 32 | leds_event = osk_leds_event; | ||
| 33 | |||
| 34 | else | ||
| 35 | return -1; | ||
| 36 | |||
| 37 | if (machine_is_omap_h2() | ||
| 38 | || machine_is_omap_h3() | ||
| 39 | #ifdef CONFIG_OMAP_OSK_MISTRAL | ||
| 40 | || machine_is_omap_osk() | ||
| 41 | #endif | ||
| 42 | ) { | ||
| 43 | |||
| 44 | /* LED1/LED2 pins can be used as GPIO (as done here), or by | ||
| 45 | * the LPG (works even in deep sleep!), to drive a bicolor | ||
| 46 | * LED on the H2 sample board, and another on the H2/P2 | ||
| 47 | * "surfer" expansion board. | ||
| 48 | * | ||
| 49 | * The same pins drive a LED on the OSK Mistral board, but | ||
| 50 | * that's a different kind of LED (just one color at a time). | ||
| 51 | */ | ||
| 52 | omap_cfg_reg(P18_1610_GPIO3); | ||
| 53 | if (gpio_request(3, "LED red") == 0) | ||
| 54 | gpio_direction_output(3, 1); | ||
| 55 | else | ||
| 56 | printk(KERN_WARNING "LED: can't get GPIO3/red?\n"); | ||
| 57 | |||
| 58 | omap_cfg_reg(MPUIO4); | ||
| 59 | if (gpio_request(OMAP_MPUIO(4), "LED green") == 0) | ||
| 60 | gpio_direction_output(OMAP_MPUIO(4), 1); | ||
| 61 | else | ||
| 62 | printk(KERN_WARNING "LED: can't get MPUIO4/green?\n"); | ||
| 63 | } | ||
| 64 | |||
| 65 | leds_event(led_start); | ||
| 66 | return 0; | ||
| 67 | } | ||
| 68 | |||
| 69 | __initcall(omap_leds_init); | ||
diff --git a/arch/arm/mach-omap1/leds.h b/arch/arm/mach-omap1/leds.h new file mode 100644 index 00000000000..a1e9fedc376 --- /dev/null +++ b/arch/arm/mach-omap1/leds.h | |||
| @@ -0,0 +1,3 @@ | |||
| 1 | extern void innovator_leds_event(led_event_t evt); | ||
| 2 | extern void h2p2_dbg_leds_event(led_event_t evt); | ||
| 3 | extern void osk_leds_event(led_event_t evt); | ||
