1 files changed, 286 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 56b930a1344..59c97a33113 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,5 +1,15 @@
 config IMX_HAVE_DMA_V1
         bool
+#
+# ARCH_MX31 and ARCH_MX35 are left for compatibility
+# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
+# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
+# more sensible) names are used: SOC_IMX31 and SOC_IMX35
+config ARCH_MX31
+        bool
+
+config ARCH_MX35
+        bool
 
 config SOC_IMX1
         bool
@@ -31,6 +41,24 @@ config SOC_IMX27
         select IMX_HAVE_IOMUX_V1
         select MXC_AVIC
 
+config SOC_IMX31
+        bool
+        select CPU_V6
+        select IMX_HAVE_PLATFORM_MXC_RNGA
+        select ARCH_MXC_AUDMUX_V2
+        select ARCH_MX31
+        select MXC_AVIC
+
+config SOC_IMX35
+        bool
+        select CPU_V6
+        select ARCH_MXC_IOMUX_V3
+        select ARCH_MXC_AUDMUX_V2
+        select HAVE_EPIT
+        select ARCH_MX35
+        select MXC_AVIC
+
+
 if ARCH_MX1
 
 comment "MX1 platforms:"
@@ -40,6 +68,7 @@ config MACH_MXLADS
 config ARCH_MX1ADS
         bool "MX1ADS platform"
         select MACH_MXLADS
+        select SOC_IMX1
         select IMX_HAVE_PLATFORM_IMX_I2C
         select IMX_HAVE_PLATFORM_IMX_UART
         help
@@ -51,6 +80,13 @@ config MACH_SCB9328
         help
           Say Y here if you are using a Synertronixx scb9328 board
 
+config MACH_APF9328
+        bool "APF9328"
+        select SOC_IMX1
+        select IMX_HAVE_PLATFORM_IMX_UART
+        help
+          Say Yes here if you are using the Armadeus APF9328 development board
+
 endif
 
 if ARCH_MX2
@@ -129,6 +165,7 @@ choice
 
 config MACH_EUKREA_MBIMXSD25_BASEBOARD
         bool "Eukrea MBIMXSD development board"
+        select IMX_HAVE_PLATFORM_GPIO_KEYS
         select IMX_HAVE_PLATFORM_IMX_SSI
         help
           This adds board specific devices that can be found on Eukrea's
@@ -254,6 +291,7 @@ config MACH_MX27_3DS
 config MACH_IMX27_VISSTRIM_M10
         bool "Vista Silicon i.MX27 Visstrim_m10"
         select SOC_IMX27
+        select IMX_HAVE_PLATFORM_GPIO_KEYS
         select IMX_HAVE_PLATFORM_IMX_I2C
         select IMX_HAVE_PLATFORM_IMX_SSI
         select IMX_HAVE_PLATFORM_IMX_UART
@@ -314,3 +352,251 @@ config MACH_IMX27IPCAM
           configurations for the board and its peripherals.
 
 endif
+
+if ARCH_MX3
+
+comment "MX31 platforms:"
+
+config MACH_MX31ADS
+        bool "Support MX31ADS platforms"
+        select SOC_IMX31
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_SSI
+        select IMX_HAVE_PLATFORM_IMX_UART
+        default y
+        help
+          Include support for MX31ADS platform. This includes specific
+          configurations for the board and its peripherals.
+
+config MACH_MX31ADS_WM1133_EV1
+        bool "Support Wolfson Microelectronics 1133-EV1 module"
+        depends on MACH_MX31ADS
+        depends on MFD_WM8350_I2C
+        depends on REGULATOR_WM8350
+        select MFD_WM8350_CONFIG_MODE_0
+        select MFD_WM8352_CONFIG_MODE_0
+        help
+          Include support for the Wolfson Microelectronics 1133-EV1 PMU
+          and audio module for the MX31ADS platform.
+
+config MACH_MX31LILLY
+        bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+        select SOC_IMX31
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_IPU_CORE
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_MMC
+        select IMX_HAVE_PLATFORM_SPI_IMX
+        select MXC_ULPI if USB_ULPI
+        help
+          Include support for mx31 based LILLY1131 modules. This includes
+          specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+        bool "Support MX31 LITEKIT (LogicPD)"
+        select SOC_IMX31
+        select MXC_ULPI if USB_ULPI
+        select IMX_HAVE_PLATFORM_IMX2_WDT
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_MMC
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_MXC_RTC
+        select IMX_HAVE_PLATFORM_SPI_IMX
+        help
+          Include support for MX31 LITEKIT platform. This includes specific
+          configurations for the board and its peripherals.
+
+config MACH_PCM037
+        bool "Support Phytec pcm037 (i.MX31) platforms"
+        select SOC_IMX31
+        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_IMX2_WDT
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_IPU_CORE
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_MMC
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_MXC_W1
+        select MXC_ULPI if USB_ULPI
+        help
+          Include support for Phytec pcm037 platform. This includes
+          specific configurations for the board and its peripherals.
+
+config MACH_PCM037_EET
+        bool "Support pcm037 EET board extensions"
+        depends on MACH_PCM037
+        select IMX_HAVE_PLATFORM_GPIO_KEYS
+        select IMX_HAVE_PLATFORM_SPI_IMX
+        help
+          Add support for PCM037 EET baseboard extensions. If you are using the
+          OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+          command-line parameter.
+
+config MACH_MX31_3DS
+        bool "Support MX31PDK (3DS)"
+        select SOC_IMX31
+        select MXC_DEBUG_BOARD
+        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_IMX2_WDT
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_KEYPAD
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_IPU_CORE
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_SPI_IMX
+        select MXC_ULPI if USB_ULPI
+        help
+          Include support for MX31PDK (3DS) platform. This includes specific
+          configurations for the board and its peripherals.
+
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+        bool "Make the MXC NAND driver use the in flash Bad Block Table"
+        depends on MACH_MX31_3DS
+        depends on MTD_NAND_MXC
+        help
+          Enable this if you want that the MXC NAND driver uses the in flash
+          Bad Block Table to know what blocks are bad instead of scanning the
+          entire flash looking for bad block markers.
+
+config MACH_MX31MOBOARD
+        bool "Support mx31moboard platforms (EPFL Mobots group)"
+        select SOC_IMX31
+        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_IPU_CORE
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_MMC
+        select IMX_HAVE_PLATFORM_SPI_IMX
+        select MXC_ULPI if USB_ULPI
+        help
+          Include support for mx31moboard platform. This includes specific
+          configurations for the board and its peripherals.
+
+config MACH_QONG
+        bool "Support Dave/DENX QongEVB-LITE platform"
+        select SOC_IMX31
+        select IMX_HAVE_PLATFORM_IMX_UART
+        help
+          Include support for Dave/DENX QongEVB-LITE platform. This includes
+          specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+        bool "Support Atmark Armadillo-500 Development Base Board"
+        select SOC_IMX31
+        select IMX_HAVE_PLATFORM_GPIO_KEYS
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_IPU_CORE
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_MMC
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select MXC_ULPI if USB_ULPI
+        help
+          Include support for Atmark Armadillo-500 platform. This includes
+          specific configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+        bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+        select SOC_IMX31
+        select IMX_HAVE_PLATFORM_IMX_UART
+        help
+          Include support for KZM-ARM11-01. This includes specific
+          configurations for the board and its peripherals.
+
+config MACH_BUG
+        bool "Support Buglabs BUGBase platform"
+        select SOC_IMX31
+        select IMX_HAVE_PLATFORM_IMX_UART
+        default y
+        help
+          Include support for BUGBase 1.3 platform. This includes specific
+          configurations for the board and its peripherals.
+
+comment "MX35 platforms:"
+
+config MACH_PCM043
+        bool "Support Phytec pcm043 (i.MX35) platforms"
+        select SOC_IMX35
+        select IMX_HAVE_PLATFORM_FLEXCAN
+        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_IMX2_WDT
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_SSI
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_IPU_CORE
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+        select MXC_ULPI if USB_ULPI
+        help
+          Include support for Phytec pcm043 platform. This includes
+          specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+        bool "Support MX35PDK platform"
+        select SOC_IMX35
+        select MXC_DEBUG_BOARD
+        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_IMX2_WDT
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+        help
+          Include support for MX35PDK platform. This includes specific
+          configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX35
+        bool "Support Eukrea CPUIMX35 Platform"
+        select SOC_IMX35
+        select IMX_HAVE_PLATFORM_FLEXCAN
+        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_IMX2_WDT
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+        select MXC_ULPI if USB_ULPI
+        help
+          Include support for Eukrea CPUIMX35 platform. This includes
+          specific configurations for the board and its peripherals.
+
+choice
+        prompt "Baseboard"
+        depends on MACH_EUKREA_CPUIMX35
+        default MACH_EUKREA_MBIMXSD35_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD35_BASEBOARD
+        bool "Eukrea MBIMXSD development board"
+        select IMX_HAVE_PLATFORM_GPIO_KEYS
+        select IMX_HAVE_PLATFORM_IMX_SSI
+        select IMX_HAVE_PLATFORM_IPU_CORE
+        help
+          This adds board specific devices that can be found on Eukrea's
+          MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_VPR200
+        bool "Support VPR200 platform"
+        select SOC_IMX35
+        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_GPIO_KEYS
+        select IMX_HAVE_PLATFORM_IMX2_WDT
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IPU_CORE
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+        help
+          Include support for VPR200 platform. This includes specific
+          configurations for the board and its peripherals.
+
+endif