2 files changed, 20 insertions, 2 deletions

diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt
index deb35de7098..b66cb6d31d6 100644
--- a/Documentation/powerpc/dts-bindings/fsl/diu.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt
@@ -4,10 +4,17 @@ The Freescale DIU is a LCD controller, with proper hardware, it can also
 drive DVI monitors.
 
 Required properties:
-- compatible : should be "fsl-diu".
+- compatible : should be "fsl,diu" or "fsl,mpc5121-diu".
 - reg : should contain at least address and length of the DIU register
   set.
-- Interrupts : one DIU interrupt should be describe here.
+- interrupts : one DIU interrupt should be described here.
+- interrupt-parent : the phandle for the interrupt controller that
+  services interrupts for this device.
+
+Optional properties:
+- edid : verbatim EDID data block describing attached display.
+  Data from the detailed timing descriptor will be used to
+  program the display controller.
 
 Example (MPC8610HPCD):
         display@2c000 {
@@ -16,3 +23,12 @@ Example (MPC8610HPCD):
                 interrupts = <72 2>;
                 interrupt-parent = <&mpic>;
         };
+
+Example for MPC5121:
+        display@2100 {
+                compatible = "fsl,mpc5121-diu";
+                reg = <0x2100 0x100>;
+                interrupts = <64 0x8>;
+                interrupt-parent = <&ipic>;
+                edid = [edid-data];
+        };
diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
index 50da2031058..1eacd6b20ed 100644
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
@@ -20,6 +20,7 @@ Recommended properties :
  - fsl,preserve-clocking : boolean; if defined, the clock settings
    from the bootloader are preserved (not touched).
  - clock-frequency : desired I2C bus clock frequency in Hz.
+ - fsl,timeout : I2C bus timeout in microseconds.
 
 Examples :
 
@@ -59,4 +60,5 @@ Examples :
                 interrupts = <43 2>;
                 interrupt-parent = <&mpic>;
                 clock-frequency = <400000>;
+                fsl,timeout = <10000>;
         };