aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mtd/atmel-nand.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/atmel-nand.txt')
-rw-r--r--Documentation/devicetree/bindings/mtd/atmel-nand.txt40
1 files changed, 39 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index a20069502f5..d555421ea49 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -3,7 +3,9 @@ Atmel NAND flash
3Required properties: 3Required properties:
4- compatible : "atmel,at91rm9200-nand". 4- compatible : "atmel,at91rm9200-nand".
5- reg : should specify localbus address and size used for the chip, 5- reg : should specify localbus address and size used for the chip,
6 and if availlable the ECC. 6 and hardware ECC controller if available.
7 If the hardware ECC is PMECC, it should contain address and size for
8 PMECC, PMECC Error Location controller and ROM which has lookup tables.
7- atmel,nand-addr-offset : offset for the address latch. 9- atmel,nand-addr-offset : offset for the address latch.
8- atmel,nand-cmd-offset : offset for the command latch. 10- atmel,nand-cmd-offset : offset for the command latch.
9- #address-cells, #size-cells : Must be present if the device has sub-nodes 11- #address-cells, #size-cells : Must be present if the device has sub-nodes
@@ -16,6 +18,15 @@ Optional properties:
16- nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default. 18- nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default.
17 Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", 19 Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
18 "soft_bch". 20 "soft_bch".
21- atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware.
22 Only supported by at91sam9x5 or later sam9 product.
23- atmel,pmecc-cap : error correct capability for Programmable Multibit ECC
24 Controller. Supported values are: 2, 4, 8, 12, 24.
25- atmel,pmecc-sector-size : sector size for ECC computation. Supported values
26 are: 512, 1024.
27- atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM
28 for different sector size. First one is for sector size 512, the next is for
29 sector size 1024.
19- nand-bus-width : 8 or 16 bus width if not present 8 30- nand-bus-width : 8 or 16 bus width if not present 8
20- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false 31- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
21 32
@@ -39,3 +50,30 @@ nand0: nand@40000000,0 {
39 ... 50 ...
40 }; 51 };
41}; 52};
53
54/* for PMECC supported chips */
55nand0: nand@40000000 {
56 compatible = "atmel,at91rm9200-nand";
57 #address-cells = <1>;
58 #size-cells = <1>;
59 reg = < 0x40000000 0x10000000 /* bus addr & size */
60 0xffffe000 0x00000600 /* PMECC addr & size */
61 0xffffe600 0x00000200 /* PMECC ERRLOC addr & size */
62 0x00100000 0x00100000 /* ROM addr & size */
63 >;
64 atmel,nand-addr-offset = <21>; /* ale */
65 atmel,nand-cmd-offset = <22>; /* cle */
66 nand-on-flash-bbt;
67 nand-ecc-mode = "hw";
68 atmel,has-pmecc; /* enable PMECC */
69 atmel,pmecc-cap = <2>;
70 atmel,pmecc-sector-size = <512>;
71 atmel,pmecc-lookup-table-offset = <0x8000 0x10000>;
72 gpios = <&pioD 5 0 /* rdy */
73 &pioD 4 0 /* nce */
74 0 /* cd */
75 >;
76 partition@0 {
77 ...
78 };
79};