[ALSA] snd-bt87x: Power down audio ADC when not in use

Sets a bit to power down the Bt87x's internal audio ADC when the ALSA device
isn't open, or when it is in 'digital mode' using an external ADC.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

1 files changed, 9 insertions, 3 deletions

diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index 10c8af1b736..42e57fd02d3 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -377,7 +377,7 @@ static struct snd_pcm_hardware snd_bt87x_analog_hw = {
 
 static int snd_bt87x_set_digital_hw(struct snd_bt87x *chip, struct snd_pcm_runtime *runtime)
 {
-        chip->reg_control |= CTL_DA_IOM_DA;
+        chip->reg_control |= CTL_DA_IOM_DA | CTL_A_PWRDN;
         runtime->hw = snd_bt87x_digital_hw;
         runtime->hw.rates = snd_pcm_rate_to_rate_bit(chip->board.dig_rate);
         runtime->hw.rate_min = chip->board.dig_rate;
@@ -398,7 +398,7 @@ static int snd_bt87x_set_analog_hw(struct snd_bt87x *chip, struct snd_pcm_runtim
                 .rats = &analog_clock
         };
 
-        chip->reg_control &= ~CTL_DA_IOM_DA;
+        chip->reg_control &= ~(CTL_DA_IOM_DA | CTL_A_PWRDN);
         runtime->hw = snd_bt87x_analog_hw;
         return snd_pcm_hw_constraint_ratnums(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
                                              &constraint_rates);
@@ -437,6 +437,11 @@ static int snd_bt87x_close(struct snd_pcm_substream *substream)
 {
         struct snd_bt87x *chip = snd_pcm_substream_chip(substream);
 
+        spin_lock_irq(&chip->reg_lock);
+        chip->reg_control |= CTL_A_PWRDN;
+        snd_bt87x_writel(chip, REG_GPIO_DMA_CTL, chip->reg_control);
+        spin_unlock_irq(&chip->reg_lock);
+
         chip->substream = NULL;
         clear_bit(0, &chip->opened);
         smp_mb__after_clear_bit();
@@ -751,7 +756,8 @@ static int __devinit snd_bt87x_create(struct snd_card *card,
                 goto fail;
         }
 
-        chip->reg_control = CTL_DA_ES2 | CTL_PKTP_16 | (15 << CTL_DA_SDR_SHIFT);
+        chip->reg_control = CTL_A_PWRDN | CTL_DA_ES2 |
+                            CTL_PKTP_16 | (15 << CTL_DA_SDR_SHIFT);
         chip->interrupt_mask = MY_INTERRUPTS;
         snd_bt87x_writel(chip, REG_GPIO_DMA_CTL, chip->reg_control);
         snd_bt87x_writel(chip, REG_INT_MASK, 0);