[SPARC]: remove audioio.h

The old sound drivers are gone in 2.6, so the only user left are the
compat ioctls.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 234 deletions

diff --git a/include/asm-sparc/audioio.h b/include/asm-sparc/audioio.h
deleted file mode 100644
index cf16173f521..00000000000
--- a/include/asm-sparc/audioio.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * include/asm-sparc/audioio.h
- *
- * Sparc Audio Midlayer
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
- */
-
-#ifndef _AUDIOIO_H_
-#define _AUDIOIO_H_
-
-/*
- *      SunOS/Solaris /dev/audio interface
- */
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/ioctl.h>
-#endif
-
-/*
- * This structure contains state information for audio device IO streams.
- */
-typedef struct audio_prinfo {
-        /*
-         * The following values describe the audio data encoding.
-         */
-        unsigned int sample_rate;       /* samples per second */
-        unsigned int channels;  /* number of interleaved channels */
-        unsigned int precision; /* bit-width of each sample */
-        unsigned int encoding;  /* data encoding method */
-
-        /*
-         * The following values control audio device configuration
-         */
-        unsigned int gain;              /* gain level: 0 - 255 */
-        unsigned int port;              /* selected I/O port (see below) */
-        unsigned int avail_ports;       /* available I/O ports (see below) */
-        unsigned int _xxx[2];           /* Reserved for future use */
-
-        unsigned int buffer_size;       /* I/O buffer size */
-
-        /*
-         * The following values describe driver state
-         */
-        unsigned int samples;           /* number of samples converted */
-        unsigned int eof;               /* End Of File counter (play only) */
-
-        unsigned char   pause;          /* non-zero for pause, zero to resume */
-        unsigned char   error;          /* non-zero if overflow/underflow */
-        unsigned char   waiting;        /* non-zero if a process wants access */
-        unsigned char balance;  /* stereo channel balance */
-
-        unsigned short minordev;
-
-        /*
-         * The following values are read-only state flags
-         */
-        unsigned char open;             /* non-zero if open access permitted */
-        unsigned char active;           /* non-zero if I/O is active */
-} audio_prinfo_t;
-
-
-/*
- * This structure describes the current state of the audio device.
- */
-typedef struct audio_info {
-        /*
-         * Per-stream information
-         */
-        audio_prinfo_t play;    /* output status information */
-        audio_prinfo_t record;  /* input status information */
-
-        /*
-         * Per-unit/channel information
-         */
-        unsigned int monitor_gain;      /* input to output mix: 0 - 255 */
-        unsigned char output_muted;     /* non-zero if output is muted */
-        unsigned char _xxx[3];  /* Reserved for future use */
-        unsigned int _yyy[3];           /* Reserved for future use */
-} audio_info_t;
-
-
-/*
- * Audio encoding types
- */
-#define AUDIO_ENCODING_NONE     (0)     /* no encoding assigned   */
-#define AUDIO_ENCODING_ULAW     (1)     /* u-law encoding         */
-#define AUDIO_ENCODING_ALAW     (2)     /* A-law encoding         */
-#define AUDIO_ENCODING_LINEAR   (3)     /* Linear PCM encoding    */
-#define AUDIO_ENCODING_FLOAT    (4)     /* IEEE float (-1. <-> +1.) */
-#define AUDIO_ENCODING_DVI      (104)   /* DVI ADPCM              */
-#define AUDIO_ENCODING_LINEAR8  (105)   /* 8 bit UNSIGNED         */
-#define AUDIO_ENCODING_LINEARLE (106)   /* Linear PCM LE encoding */
-
-/*
- * These ranges apply to record, play, and monitor gain values
- */
-#define AUDIO_MIN_GAIN  (0)     /* minimum gain value */
-#define AUDIO_MAX_GAIN  (255)   /* maximum gain value */
-
-/*
- * These values apply to the balance field to adjust channel gain values
- */
-#define AUDIO_LEFT_BALANCE      (0)     /* left channel only    */
-#define AUDIO_MID_BALANCE       (32)    /* equal left/right channel */
-#define AUDIO_RIGHT_BALANCE     (64)    /* right channel only   */
-#define AUDIO_BALANCE_SHIFT     (3)
-
-/*
- * Generic minimum/maximum limits for number of channels, both modes
- */
-#define AUDIO_MIN_PLAY_CHANNELS (1)
-#define AUDIO_MAX_PLAY_CHANNELS (4)
-#define AUDIO_MIN_REC_CHANNELS  (1)
-#define AUDIO_MAX_REC_CHANNELS  (4)
-
-/*
- * Generic minimum/maximum limits for sample precision
- */
-#define AUDIO_MIN_PLAY_PRECISION        (8)
-#define AUDIO_MAX_PLAY_PRECISION        (32)
-#define AUDIO_MIN_REC_PRECISION         (8)
-#define AUDIO_MAX_REC_PRECISION         (32)
-
-/*
- * Define some convenient names for typical audio ports
- */
-/*
- * output ports (several may be enabled simultaneously)
- */
-#define AUDIO_SPEAKER           0x01    /* output to built-in speaker */
-#define AUDIO_HEADPHONE         0x02    /* output to headphone jack */
-#define AUDIO_LINE_OUT          0x04    /* output to line out    */
-
-/*
- * input ports (usually only one at a time)
- */
-#define AUDIO_MICROPHONE        0x01    /* input from microphone */
-#define AUDIO_LINE_IN           0x02    /* input from line in    */
-#define AUDIO_CD                0x04    /* input from on-board CD inputs */
-#define AUDIO_INTERNAL_CD_IN    AUDIO_CD        /* input from internal CDROM */
-#define AUDIO_ANALOG_LOOPBACK   0x40    /* input from output */
-
-
-/*
- * This macro initializes an audio_info structure to 'harmless' values.
- * Note that (~0) might not be a harmless value for a flag that was
- * a signed int.
- */
-#define AUDIO_INITINFO(i)       {                                       \
-        unsigned int    *__x__;                                         \
-        for (__x__ = (unsigned int *)(i);                               \
-            (char *) __x__ < (((char *)(i)) + sizeof (audio_info_t));   \
-            *__x__++ = ~0);                                             \
-}
-
-/*
- * These allow testing for what the user wants to set 
- */
-#define AUD_INITVALUE   (~0)
-#define Modify(X)       ((unsigned int)(X) != AUD_INITVALUE)
-#define Modifys(X)      ((X) != (unsigned short)AUD_INITVALUE)
-#define Modifyc(X)      ((X) != (unsigned char)AUD_INITVALUE)
-
-/*
- * Parameter for the AUDIO_GETDEV ioctl to determine current
- * audio devices.
- */
-#define MAX_AUDIO_DEV_LEN       (16)
-typedef struct audio_device {
-        char name[MAX_AUDIO_DEV_LEN];
-        char version[MAX_AUDIO_DEV_LEN];
-        char config[MAX_AUDIO_DEV_LEN];
-} audio_device_t;
-
-
-/*
- * Ioctl calls for the audio device.
- */
-
-/*
- * AUDIO_GETINFO retrieves the current state of the audio device.
- *
- * AUDIO_SETINFO copies all fields of the audio_info structure whose
- * values are not set to the initialized value (-1) to the device state.
- * It performs an implicit AUDIO_GETINFO to return the new state of the
- * device.  Note that the record.samples and play.samples fields are set
- * to the last value before the AUDIO_SETINFO took effect.  This allows
- * an application to reset the counters while atomically retrieving the
- * last value.
- *
- * AUDIO_DRAIN suspends the calling process until the write buffers are
- * empty.
- *
- * AUDIO_GETDEV returns a structure of type audio_device_t which contains
- * three strings.  The string "name" is a short identifying string (for
- * example, the SBus Fcode name string), the string "version" identifies
- * the current version of the device, and the "config" string identifies
- * the specific configuration of the audio stream.  All fields are
- * device-dependent -- see the device specific manual pages for details.
- *
- * AUDIO_GETDEV_SUNOS returns a number which is an audio device defined 
- * herein (making it not too portable)
- *
- * AUDIO_FLUSH stops all playback and recording, clears all queued buffers, 
- * resets error counters, and restarts recording and playback as appropriate
- * for the current sampling mode.
- */
-#define AUDIO_GETINFO   _IOR('A', 1, audio_info_t)
-#define AUDIO_SETINFO   _IOWR('A', 2, audio_info_t)
-#define AUDIO_DRAIN     _IO('A', 3)
-#define AUDIO_GETDEV    _IOR('A', 4, audio_device_t)
-#define AUDIO_GETDEV_SUNOS      _IOR('A', 4, int)
-#define AUDIO_FLUSH     _IO('A', 5)
-
-/* Define possible audio hardware configurations for 
- * old SunOS-style AUDIO_GETDEV ioctl */
-#define AUDIO_DEV_UNKNOWN       (0)     /* not defined */
-#define AUDIO_DEV_AMD           (1)     /* audioamd device */
-#define AUDIO_DEV_SPEAKERBOX    (2)     /* dbri device with speakerbox */
-#define AUDIO_DEV_CODEC         (3)     /* dbri device (internal speaker) */
-#define AUDIO_DEV_CS4231        (5)     /* cs4231 device */
-
-/*
- * The following ioctl sets the audio device into an internal loopback mode,
- * if the hardware supports this.  The argument is TRUE to set loopback,
- * FALSE to reset to normal operation.  If the hardware does not support
- * internal loopback, the ioctl should fail with EINVAL.
- * Causes ADC data to be digitally mixed in and sent to the DAC.
- */
-#define AUDIO_DIAG_LOOPBACK     _IOW('A', 101, int)
-
-#endif /* _AUDIOIO_H_ */