[SCSI] usb-storage: add support for write cache quirk

Add support for write cache quirk on usb hdd. scsi driver will be set to wce
by detecting write cache quirk in quirk list when plugging usb hdd.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

2 files changed, 9 insertions, 1 deletions

diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 11418da9bc0..a3d54366afc 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -236,6 +236,11 @@ static int slave_configure(struct scsi_device *sdev)
                                         US_FL_SCM_MULT_TARG)) &&
                                 us->protocol == USB_PR_BULK)
                         us->use_last_sector_hacks = 1;
+
+                /* Check if write cache default on flag is set or not */
+                if (us->fflags & US_FL_WRITE_CACHE)
+                        sdev->wce_default_on = 1;
+
         } else {
 
                 /* Non-disk-type devices don't need to blacklist any pages
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index e23c30ab66d..d012fe4329e 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -473,7 +473,7 @@ static void adjust_quirks(struct us_data *us)
                         US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
                         US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
                         US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
-                        US_FL_INITIAL_READ10);
+                        US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE);
 
         p = quirks;
         while (*p) {
@@ -529,6 +529,9 @@ static void adjust_quirks(struct us_data *us)
                 case 'o':
                         f |= US_FL_CAPACITY_OK;
                         break;
+                case 'p':
+                        f |= US_FL_WRITE_CACHE;
+                        break;
                 case 'r':
                         f |= US_FL_IGNORE_RESIDUE;
                         break;