b43: Move Analog switching into phy code

This moves the Analog switching code into the PHY files.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 files changed, 30 insertions, 20 deletions

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 156e8f3151d..ab9fa8126b7 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1052,23 +1052,6 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
         }
 }
 
-/* Turn the Analog ON/OFF */
-static void b43_switch_analog(struct b43_wldev *dev, int on)
-{
-        switch (dev->phy.type) {
-        case B43_PHYTYPE_A:
-        case B43_PHYTYPE_G:
-                b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
-                break;
-        case B43_PHYTYPE_N:
-                b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
-                              on ? 0 : 0x7FFF);
-                break;
-        default:
-                B43_WARN_ON(1);
-        }
-}
-
 void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
 {
         u32 tmslow;
@@ -1096,7 +1079,7 @@ void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
          * PHY-type, yet. wireless_core_reset will be called once again later,
          * when we know the PHY-type. */
         if (dev->phy.ops)
-                b43_switch_analog(dev, 1);
+                dev->phy.ops->switch_analog(dev, 1);
 
         macctl = b43_read32(dev, B43_MMIO_MACCTL);
         macctl &= ~B43_MACCTL_GMODE;
@@ -3952,7 +3935,7 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
         b43_dma_free(dev);
         b43_pio_free(dev);
         b43_chip_exit(dev);
-        b43_switch_analog(dev, 0);
+        dev->phy.ops->switch_analog(dev, 0);
         if (dev->wl->current_beacon) {
                 dev_kfree_skb_any(dev->wl->current_beacon);
                 dev->wl->current_beacon = NULL;
@@ -4437,7 +4420,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
                 wl->current_dev = dev;
         INIT_WORK(&dev->restart_work, b43_chip_reset);
 
-        b43_switch_analog(dev, 0);
+        dev->phy.ops->switch_analog(dev, 0);
         ssb_device_disable(dev->dev, 0);
         ssb_bus_may_powerdown(bus);
 
diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c
index c9f00ace46a..0f1a84c9de6 100644
--- a/drivers/net/wireless/b43/phy_a.c
+++ b/drivers/net/wireless/b43/phy_a.c
@@ -632,6 +632,7 @@ const struct b43_phy_operations b43_phyops_a = {
         .radio_write            = b43_aphy_op_radio_write,
         .supports_hwpctl        = b43_aphy_op_supports_hwpctl,
         .software_rfkill        = b43_aphy_op_software_rfkill,
+        .switch_analog          = b43_phyop_switch_analog_generic,
         .switch_channel         = b43_aphy_op_switch_channel,
         .get_default_chan       = b43_aphy_op_get_default_chan,
         .set_rx_antenna         = b43_aphy_op_set_rx_antenna,
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index e12fca69a97..4d4345d76ab 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -374,3 +374,8 @@ int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset)
 
         return average;
 }
+
+void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
+{
+        b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
+}
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 4a1795f5fc2..c9f5430d1d7 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -108,6 +108,8 @@ enum b43_txpwr_result {
  *                      RFKILL_STATE_SOFT_BLOCKED or
  *                      RFKILL_STATE_UNBLOCKED
  *                      Must not be NULL.
+ * @switch_analog:      Turn the Analog on/off.
+ *                      Must not be NULL.
  * @switch_channel:     Switch the radio to another channel.
  *                      Must not be NULL.
  * @get_default_chan:   Just returns the default channel number.
@@ -158,6 +160,7 @@ struct b43_phy_operations {
         /* Radio */
         bool (*supports_hwpctl)(struct b43_wldev *dev);
         void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state);
+        void (*switch_analog)(struct b43_wldev *dev, bool on);
         int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel);
         unsigned int (*get_default_chan)(struct b43_wldev *dev);
         void (*set_rx_antenna)(struct b43_wldev *dev, int antenna);
@@ -397,5 +400,14 @@ void b43_phy_txpower_adjust_work(struct work_struct *work);
  */
 int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset);
 
+/**
+ * b43_phy_switch_analog_generic - Generic PHY operation for switching the Analog.
+ *
+ * It does the switching based on the PHY0 core register.
+ * Do _not_ call this directly. Only use it as a switch_analog callback
+ * for struct b43_phy_operations.
+ */
+void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on);
+
 
 #endif /* LINUX_B43_PHY_COMMON_H_ */
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index b44740b24e7..e8c012c9abb 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -3271,6 +3271,7 @@ const struct b43_phy_operations b43_phyops_g = {
         .radio_write            = b43_gphy_op_radio_write,
         .supports_hwpctl        = b43_gphy_op_supports_hwpctl,
         .software_rfkill        = b43_gphy_op_software_rfkill,
+        .switch_analog          = b43_phyop_switch_analog_generic,
         .switch_channel         = b43_gphy_op_switch_channel,
         .get_default_chan       = b43_gphy_op_get_default_chan,
         .set_rx_antenna         = b43_gphy_op_set_rx_antenna,
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 41994f1f0f0..c5d9dc3667c 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -146,6 +146,7 @@ const struct b43_phy_operations b43_phyops_lp = {
         .radio_read             = b43_lpphy_op_radio_read,
         .radio_write            = b43_lpphy_op_radio_write,
         .software_rfkill        = b43_lpphy_op_software_rfkill,
+        .switch_analog          = b43_phyop_switch_analog_generic,
         .switch_channel         = b43_lpphy_op_switch_channel,
         .get_default_chan       = b43_lpphy_op_get_default_chan,
         .set_rx_antenna         = b43_lpphy_op_set_rx_antenna,
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 617724dc6aa..8bcfda5f3f0 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -583,6 +583,12 @@ static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
 {//TODO
 }
 
+static void b43_nphy_op_switch_analog(struct b43_wldev *dev, bool on)
+{
+        b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
+                      on ? 0 : 0x7FFF);
+}
+
 static int b43_nphy_op_switch_channel(struct b43_wldev *dev,
                                       unsigned int new_channel)
 {
@@ -614,6 +620,7 @@ const struct b43_phy_operations b43_phyops_n = {
         .radio_read             = b43_nphy_op_radio_read,
         .radio_write            = b43_nphy_op_radio_write,
         .software_rfkill        = b43_nphy_op_software_rfkill,
+        .switch_analog          = b43_nphy_op_switch_analog,
         .switch_channel         = b43_nphy_op_switch_channel,
         .get_default_chan       = b43_nphy_op_get_default_chan,
         .recalc_txpower         = b43_nphy_op_recalc_txpower,