b43: HT-PHY: calibrate radio after switching channel

After uploading radio values calibration goes in. In MMIO dump it is:
 radio_read(0x002b) -> 0x0008
radio_write(0x002b) <- 0x0008
 radio_read(0x002e) -> 0x0004
radio_write(0x002e) <- 0x0000
 radio_read(0x002e) -> 0x0000
radio_write(0x002e) <- 0x0004
 radio_read(0x002b) -> 0x0008
radio_write(0x002b) <- 0x0009
To find masks and sets, MMIO hacks were used to fool closed driver.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 7 insertions, 1 deletions

diff --git a/drivers/net/wireless/b43/phy_ht.c b/drivers/net/wireless/b43/phy_ht.c
index 0b13f6f37c2..72f01ce8b42 100644
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
@@ -69,7 +69,13 @@ static void b43_radio_2059_channel_setup(struct b43_wldev *dev,
 
         udelay(50);
 
-        /* TODO */
+        /* Calibration */
+        b43_radio_mask(dev, 0x2b, ~0x1);
+        b43_radio_mask(dev, 0x2e, ~0x4);
+        b43_radio_set(dev, 0x2e, 0x4);
+        b43_radio_set(dev, 0x2b, 0x1);
+
+        udelay(300);
 }
 
 static void b43_phy_ht_channel_setup(struct b43_wldev *dev,