Fix misspellings collected by members of KJ list.

Fix the misspellings of "propogate", "writting" and (oh, the shame
:-) "kenrel" in the source tree.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

15 files changed, 21 insertions, 21 deletions

diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 7710a6a77d9..f6ac1d316ea 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1573,11 +1573,11 @@ void no_tty(void)
 
 
 /**
- *      stop_tty        -       propogate flow control
+ *      stop_tty        -       propagate flow control
  *      @tty: tty to stop
  *
  *      Perform flow control to the driver. For PTY/TTY pairs we
- *      must also propogate the TIOCKPKT status. May be called
+ *      must also propagate the TIOCKPKT status. May be called
  *      on an already stopped device and will not re-call the driver
  *      method.
  *
@@ -1607,11 +1607,11 @@ void stop_tty(struct tty_struct *tty)
 EXPORT_SYMBOL(stop_tty);
 
 /**
- *      start_tty       -       propogate flow control
+ *      start_tty       -       propagate flow control
  *      @tty: tty to start
  *
  *      Start a tty that has been stopped if at all possible. Perform
- *      any neccessary wakeups and propogate the TIOCPKT status. If this
+ *      any neccessary wakeups and propagate the TIOCPKT status. If this
  *      is the tty was previous stopped and is being started then the
  *      driver start method is invoked and the line discipline woken.
  *
diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c
index f5d40aa3d27..f64546c6aeb 100644
--- a/drivers/media/dvb/frontends/dib7000m.c
+++ b/drivers/media/dvb/frontends/dib7000m.c
@@ -266,7 +266,7 @@ static int dib7000m_sad_calib(struct dib7000m_state *state)
 {
 
 /* internal */
-//      dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+//      dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is written in set_bandwidth
         dib7000m_write_word(state, 929, (0 << 1) | (0 << 0));
         dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096
 
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 0349a4b5da3..aece458cfe1 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -223,7 +223,7 @@ static int dib7000p_set_bandwidth(struct dvb_frontend *demod, u8 BW_Idx)
 static int dib7000p_sad_calib(struct dib7000p_state *state)
 {
 /* internal */
-//      dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+//      dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is written in set_bandwidth
         dib7000p_write_word(state, 73, (0 << 1) | (0 << 0));
         dib7000p_write_word(state, 74, 776); // 0.625*3.3 / 4096
 
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 563a8319e60..54ccc6e1f92 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -70,7 +70,7 @@ static int em2800_i2c_send_max4(struct em28xx *dev, unsigned char addr,
 
         ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len);
         if (ret != 2 + len) {
-                em28xx_warn("writting to i2c device failed (error=%i)\n", ret);
+                em28xx_warn("writing to i2c device failed (error=%i)\n", ret);
                 return -EIO;
         }
         for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 2ab173d9a0e..1e67720f106 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -113,7 +113,7 @@
 /* RxOver  overflow in Recv FIFO                                */
 /* SipRcv  received serial gap  (or other condition you set)    */
 /* Interrupts are enabled by writing a one to the IER register  */
-/* Interrupts are cleared by writting a one to the ISR register */
+/* Interrupts are cleared by writing a one to the ISR register */
 /*                                                              */
 /* 6. The remaining registers: 0x6 and 0x3 appear to be         */
 /*    reserved parts of 16 or 32 bit registersthe remainder     */
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index a037b11dac9..084795355b7 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -115,7 +115,7 @@ isl_upload_firmware(islpci_private *priv)
                             ISL38XX_MEMORY_WINDOW_SIZE : fw_len;
                         u32 __iomem *dev_fw_ptr = device_base + ISL38XX_DIRECT_MEM_WIN;
 
-                        /* set the cards base address for writting the data */
+                        /* set the card's base address for writing the data */
                         isl38xx_w32_flush(device_base, reg,
                                           ISL38XX_DIR_MEM_BASE_REG);
                         wmb();  /* be paranoid */
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 67b867f837c..5740d4d4267 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -176,7 +176,7 @@ psa_write(struct net_device *	dev,
   volatile u_char __iomem *verify = lp->mem + PSA_ADDR +
     (psaoff(0, psa_comp_number) << 1);
 
-  /* Authorize writting to PSA */
+  /* Authorize writing to PSA */
   hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN);
 
   while(n-- > 0)
@@ -1676,7 +1676,7 @@ wv_set_frequency(u_long		base,	/* i/o port of the card */
       fee_write(base, 0x60,
                 dac, 2);
 
-      /* We now should verify here that the EEprom writting was ok */
+      /* We now should verify here that the EEprom writing was ok */
 
       /* ReRead the first area */
       fee_read(base, 0x00,
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h
index 4d1c4905c74..4b9de0093a7 100644
--- a/drivers/net/wireless/wavelan_cs.p.h
+++ b/drivers/net/wireless/wavelan_cs.p.h
@@ -120,7 +120,7 @@
  * the Wavelan itself (NCR -> AT&T -> Lucent).
  *
  * All started with Anders Klemets <klemets@paul.rutgers.edu>,
- * writting a Wavelan ISA driver for the MACH microkernel. Girish
+ * writing a Wavelan ISA driver for the MACH microkernel. Girish
  * Welling <welling@paul.rutgers.edu> had also worked on it.
  * Keith Moore modify this for the Pcmcia hardware.
  * 
diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c
index 74b999d77bb..4fab0c23814 100644
--- a/drivers/sbus/char/bpp.c
+++ b/drivers/sbus/char/bpp.c
@@ -156,7 +156,7 @@ static unsigned short get_pins(unsigned minor)
 #define BPP_ICR      0x18
 #define BPP_SIZE     0x1A
 
-/* BPP_CSR.  Bits of type RW1 are cleared with writting '1'. */
+/* BPP_CSR.  Bits of type RW1 are cleared with writing '1'. */
 #define P_DEV_ID_MASK   0xf0000000      /* R   */
 #define P_DEV_ID_ZEBRA  0x40000000
 #define P_DEV_ID_L64854 0xa0000000      /*      == NCR 89C100+89C105. Pity. */
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index b675735bfbe..fbc8c27d5d9 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -9,7 +9,7 @@
  * The device works as an standard CDC device, it has 2 interfaces, the first
  * one is for firmware access and the second is the serial one.
  * The protocol is very simply, there are two posibilities reading or writing.
- * When writting the first urb must have a Header that starts with 0x20 0x29 the
+ * When writing the first urb must have a Header that starts with 0x20 0x29 the
  * next two bytes must say how much data will be sended.
  * When reading the process is almost equal except that the header starts with
  * 0x00 0x20.
@@ -18,7 +18,7 @@
  * buffer: The First and Second byte is used for a Header, the Third and Fourth
  * tells the  device the amount of information the package holds.
  * Packages are 60 bytes long Header Stuff.
- * When writting to the device the first two bytes of the header are 0x20 0x29
+ * When writing to the device the first two bytes of the header are 0x20 0x29
  * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange
  * situation, when too much data arrives to the device because it sends the data
  * but with out the header. I will use a simply hack to override this situation,
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 18f74ac7656..4807f960150 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2465,7 +2465,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
             ((edge_serial->is_epic) &&
              (!edge_serial->epic_descriptor.Supports.IOSPWriteMCR) &&
              (regNum == MCR))) {
-                dbg("SendCmdWriteUartReg - Not writting to MCR Register");
+                dbg("SendCmdWriteUartReg - Not writing to MCR Register");
                 return 0;
         }
 
@@ -2473,7 +2473,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
             ((edge_serial->is_epic) &&
              (!edge_serial->epic_descriptor.Supports.IOSPWriteLCR) &&
              (regNum == LCR))) {
-                dbg ("SendCmdWriteUartReg - Not writting to LCR Register");
+                dbg ("SendCmdWriteUartReg - Not writing to LCR Register");
                 return 0;
         }
 
diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c
index a5690a5f29d..9445cdb759b 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.c
+++ b/drivers/video/matrox/matroxfb_Ti3026.c
@@ -72,7 +72,7 @@
  *     (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
  *
  * (following author is not in any relation with this code, but his ideas
- *  were used when writting this driver)
+ *  were used when writing this driver)
  *
  *               FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk>
  *
diff --git a/drivers/video/matrox/matroxfb_accel.c b/drivers/video/matrox/matroxfb_accel.c
index a5c825d9946..c57aaadf410 100644
--- a/drivers/video/matrox/matroxfb_accel.c
+++ b/drivers/video/matrox/matroxfb_accel.c
@@ -70,7 +70,7 @@
  *     (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
  *
  * (following author is not in any relation with this code, but his ideas
- *  were used when writting this driver)
+ *  were used when writing this driver)
  *
  *               FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk>
  *
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index cb2aa402ddf..c8559a756b7 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -93,7 +93,7 @@
  *     (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
  *
  * (following author is not in any relation with this code, but his ideas
- *  were used when writting this driver)
+ *  were used when writing this driver)
  *
  *               FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk>
  *
diff --git a/drivers/video/matrox/matroxfb_misc.c b/drivers/video/matrox/matroxfb_misc.c
index 18886b629cb..5948e54b9ef 100644
--- a/drivers/video/matrox/matroxfb_misc.c
+++ b/drivers/video/matrox/matroxfb_misc.c
@@ -78,7 +78,7 @@
  *     (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
  *
  * (following author is not in any relation with this code, but his ideas
- *  were used when writting this driver)
+ *  were used when writing this driver)
  *
  *               FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk>
  *