[PATCH] zd1211rw: Fix E2P_PHY_REG patching

Due to conflicting/confusing defines in the vendor driver, we were
reading E2P_PHY_REG from the wrong location.

CR157 patching was slightly incorrect in that the vendor driver only
patches in an 8-bit value, whereas we were patching 24 bits.

Additionally, CR157 patching was happening on both zd1211 and zd1211b,
but this should only happen on zd1211.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

2 files changed, 4 insertions, 9 deletions

diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 9d299bd1885..87ee3ee020f 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -592,16 +592,16 @@ int zd_chip_unlock_phy_regs(struct zd_chip *chip)
         return r;
 }
 
-/* CR157 can be optionally patched by the EEPROM */
+/* CR157 can be optionally patched by the EEPROM for original ZD1211 */
 static int patch_cr157(struct zd_chip *chip)
 {
         int r;
-        u32 value;
+        u16 value;
 
         if (!chip->patch_cr157)
                 return 0;
 
-        r = zd_ioread32_locked(chip, &value, E2P_PHY_REG);
+        r = zd_ioread16_locked(chip, &value, E2P_PHY_REG);
         if (r)
                 return r;
 
@@ -791,11 +791,6 @@ static int zd1211b_hw_reset_phy(struct zd_chip *chip)
                 goto out;
 
         r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
-        if (r)
-                goto unlock;
-
-        r = patch_cr157(chip);
-unlock:
         t = zd_chip_unlock_phy_regs(chip);
         if (t && !r)
                 r = t;
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index ae39c225bc9..e57ed75d942 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -641,8 +641,8 @@ enum {
  * also only 11 channels. */
 #define E2P_ALLOWED_CHANNEL     E2P_DATA(0x18)
 
-#define E2P_PHY_REG             E2P_DATA(0x1a)
 #define E2P_DEVICE_VER          E2P_DATA(0x20)
+#define E2P_PHY_REG             E2P_DATA(0x25)
 #define E2P_36M_CAL_VALUE1      E2P_DATA(0x28)
 #define E2P_36M_CAL_VALUE2      E2P_DATA(0x2a)
 #define E2P_36M_CAL_VALUE3      E2P_DATA(0x2c)