sky2: fix hang on shutdown (and other irq issues)

There are several problems with recent change to how IRQ's are setup.
   * synchronize_irq in sky2_shutdown would hang because there
     was no IRQ setup.
   * when device was set to down, some IRQ bits left enabled so a
     hardware error would produce IRQ with no handler
   * quick link on Optima chip set was enabled without handler
   * suspend/resume would leave IRQ on with no handler if device
     was down

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 27 insertions, 18 deletions

diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index fdc6c394c68..f9c4529299b 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -1747,6 +1747,11 @@ static int sky2_up(struct net_device *dev)
 
         sky2_hw_up(sky2);
 
+        if (hw->chip_id == CHIP_ID_YUKON_OPT ||
+            hw->chip_id == CHIP_ID_YUKON_PRM ||
+            hw->chip_id == CHIP_ID_YUKON_OP_2)
+                imask |= Y2_IS_PHY_QLNK;        /* enable PHY Quick Link */
+
         /* Enable interrupts from phy/mac for port */
         imask = sky2_read32(hw, B0_IMSK);
         imask |= portirq_msk[port];
@@ -2101,15 +2106,21 @@ static int sky2_down(struct net_device *dev)
 
         netif_info(sky2, ifdown, dev, "disabling interface\n");
 
-        /* Disable port IRQ */
-        sky2_write32(hw, B0_IMSK,
-                     sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]);
-        sky2_read32(hw, B0_IMSK);
-
         if (hw->ports == 1) {
+                sky2_write32(hw, B0_IMSK, 0);
+                sky2_read32(hw, B0_IMSK);
+
                 napi_disable(&hw->napi);
                 free_irq(hw->pdev->irq, hw);
         } else {
+                u32 imask;
+
+                /* Disable port IRQ */
+                imask  = sky2_read32(hw, B0_IMSK);
+                imask &= ~portirq_msk[sky2->port];
+                sky2_write32(hw, B0_IMSK, imask);
+                sky2_read32(hw, B0_IMSK);
+
                 synchronize_irq(hw->pdev->irq);
                 napi_synchronize(&hw->napi);
         }
@@ -3258,7 +3269,6 @@ static void sky2_reset(struct sky2_hw *hw)
             hw->chip_id == CHIP_ID_YUKON_PRM ||
             hw->chip_id == CHIP_ID_YUKON_OP_2) {
                 u16 reg;
-                u32 msk;
 
                 if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
                         /* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
@@ -3281,11 +3291,6 @@ static void sky2_reset(struct sky2_hw *hw)
                 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
                 sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
 
-                /* enable PHY Quick Link */
-                msk = sky2_read32(hw, B0_IMSK);
-                msk |= Y2_IS_PHY_QLNK;
-                sky2_write32(hw, B0_IMSK, msk);
-
                 /* check if PSMv2 was running before */
                 reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
                 if (reg & PCI_EXP_LNKCTL_ASPMC)
@@ -3412,7 +3417,9 @@ static void sky2_all_down(struct sky2_hw *hw)
 
         sky2_read32(hw, B0_IMSK);
         sky2_write32(hw, B0_IMSK, 0);
-        synchronize_irq(hw->pdev->irq);
+
+        if (hw->ports > 1 || netif_running(hw->dev[0]))
+                synchronize_irq(hw->pdev->irq);
         napi_disable(&hw->napi);
 
         for (i = 0; i < hw->ports; i++) {
@@ -3430,7 +3437,7 @@ static void sky2_all_down(struct sky2_hw *hw)
 
 static void sky2_all_up(struct sky2_hw *hw)
 {
-        u32 imask = Y2_IS_BASE;
+        u32 imask = 0;
         int i;
 
         for (i = 0; i < hw->ports; i++) {
@@ -3446,11 +3453,13 @@ static void sky2_all_up(struct sky2_hw *hw)
                 netif_wake_queue(dev);
         }
 
-        sky2_write32(hw, B0_IMSK, imask);
-        sky2_read32(hw, B0_IMSK);
-
-        sky2_read32(hw, B0_Y2_SP_LISR);
-        napi_enable(&hw->napi);
+        if (imask || hw->ports > 1) {
+                imask |= Y2_IS_BASE;
+                sky2_write32(hw, B0_IMSK, imask);
+                sky2_read32(hw, B0_IMSK);
+                sky2_read32(hw, B0_Y2_SP_LISR);
+                napi_enable(&hw->napi);
+        }
 }
 
 static void sky2_restart(struct work_struct *work)